Re: Le retour du kimsufi

> Pour le vkvm, il y a une page explicative. Il me semble, c'est une idée
> interne d'ovh si mes souvenirs sont bons.
>
> essaye sur un RPS au pire ;(
>
> 2011/7/10 Eric Dillenseger <eric.dillenseger@...>
>
>> Salut à tous,
>>
>> J'ai passé mon aprem à tenter d'installer openbsd sur un kimsufi 2G
>> (encore un, diront certains).
>> Je suis passé par le vkvm pour fair une install via l'iso du cd
>> d'install, ça c'est bien déroulé, mais pas moyen d'avoir du réseau.
>> J'ai mis du temps à piger que ça s'exécutait en machine virtuelle donc
>> j'ai fini par piger que la carte configurée à l'install n'était pas le
>> même modèle que celui du serveur.
>> Pour terminer j'ai refait une install du freebsd d'ovh histoire de
>> voir de près ce qu'il y avait comme matos sur la bestiole; je sais,
>> j'aurai économisé du temps en faisant ça dès le début, mais comme dit
>> plus haut, j'avais pas calé que le vkm exécutait une machine
>> virtuelle.
>> Resultat des courses, le dmesg du freebsd me dit que je suis sur un
>> celeron 220 avec des chipsets SiS, dont une carte réseau sis0.
>> Le problème que j'ai remarqué sur mon install d'open, c'est que les
>> scripts rc ne s'executaient même pas, j'avais ajouté un rapide bout de
>> script à la fin du rc.conf.local pour garder une copie du dmesg, mais
>> tous ceux que j'ai eu sur le disque étaient des message de
>> l'environnement qemu du vkvm. Il n'y a donc qu'en mode vkvm que la
>> machine bootait à priori.
>> J'ai cru lire sur la liste que certains ont réussi à installer leur
>> kimsufi avec openbsd, vous auriez des astuces? J'ai déjà passé toute
>> la semaine à pester sur gentoo, j'ai moyennement la motivation de
>> tourner sur du freebsd...
>> Merci d'avance.
>>
>> Si ça peut aider, je vous met le dmesg du freebsd:
>> Copyright (c) 1992-2011 The FreeBSD Project.
>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>        The Regents of the University of California. All rights reserved.
>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>> FreeBSD 8.2-RELEASE #1: Wed May  4 17:43:04 UTC 2011
>>    root@...:/usr/obj/usr/src/sys/NOUSB i386
>> Timecounter "i8254" frequency 1193182 Hz quality 0
>> CPU: Intel(R) Celeron(R) CPU          220  @ 1.20GHz (1200.05-MHz 686-class
>> CPU)
>>  Origin = "GenuineIntel"  Id = 0x10661  Family = 6  Model = 16  Stepping =
>> 1
>>
>>  Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
>>  Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
>>  AMD Features=0x20100000<NX,LM>
>>  AMD Features2=0x1<LAHF>
>>  TSC: P-state invariant
>> real memory  = 2147483648 (2048 MB)
>> avail memory = 2052435968 (1957 MB)
>> ACPI APIC Table: <INTEL  DG965CO >
>> ioapic0: Changing APIC ID to 4
>> ioapic0 <Version 1.4> irqs 0-23 on motherboard
>> kbd1 at kbdmux0
>> acpi0: <INTEL DG965CO> on motherboard
>> acpi0: [ITHREAD]
>> acpi0: Power Button (fixed)
>> acpi0: reservation of 0, a0000 (3) failed
>> acpi0: reservation of 100000, 7df00000 (3) failed
>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>> cpu0: <ACPI CPU> on acpi0
>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem
>> 0xfff00000-0xffffffff on acpi0
>> pci0: <ACPI PCI bus> on pcib0
>> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>> pci1: <ACPI PCI bus> on pcib1
>> vgapci0: <VGA-compatible display> port 0x1000-0x107f mem
>> 0x80000000-0x87ffffff,0x8a000000-0x8a01ffff irq 16 at device 0.0 on
>> pci1
>> isab0: <PCI-ISA bridge> at device 2.0 on pci0
>> isa0: <ISA bus> on isab0
>> atapci0: <SiS 964 UDMA133 controller> port
>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2490-0x249f at device 2.5 on
>> pci0
>> ata0: <ATA channel 0> on atapci0
>> ata0: [ITHREAD]
>> ata1: <ATA channel 1> on atapci0
>> ata1: [ITHREAD]
>> ohci0: <SiS 5571 USB controller> mem 0x8a104000-0x8a104fff irq 20 at
>> device 3.0 on pci0
>> ohci0: [ITHREAD]
>> usbus0: <SiS 5571 USB controller> on ohci0
>> ohci1: <SiS 5571 USB controller> mem 0x8a103000-0x8a103fff irq 21 at
>> device 3.1 on pci0
>> ohci1: [ITHREAD]
>> usbus1: <SiS 5571 USB controller> on ohci1
>> ohci2: <SiS 5571 USB controller> mem 0x8a102000-0x8a102fff irq 22 at
>> device 3.2 on pci0
>> ohci2: [ITHREAD]
>> usbus2: <SiS 5571 USB controller> on ohci2
>> ehci0: <EHCI (generic) USB 2.0 controller> mem 0x8a101000-0x8a101fff
>> irq 23 at device 3.3 on pci0
>> ehci0: [ITHREAD]
>> usbus3: waiting for BIOS to give up control
>> usbus3: timed out waiting for BIOS
>> usbus3: EHCI version 1.0
>> usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
>> sis0: <SiS 900 10/100BaseTX> port 0x2000-0x20ff mem
>> 0x8a100000-0x8a100fff irq 19 at device 4.0 on pci0
>> miibus0: <MII bus> on sis0
>> ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
>> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>> sis0: Ethernet address: 00:1c:c0:82:92:13
>> sis0: [ITHREAD]
>> atapci1: <SiS 964 UDMA133 controller> port
>>
>> 0x24a8-0x24af,0x24b4-0x24b7,0x24a0-0x24a7,0x24b0-0x24b3,0x2480-0x248f,0x2400-0x247f
>> irq 17 at device 5.0 on pci0
>> atapci1: [ITHREAD]
>> ata2: <ATA channel 0> on atapci1
>> ata2: [ITHREAD]
>> ata3: <ATA channel 1> on atapci1
>> ata3: [ITHREAD]
>> pcib2: <PCI-PCI bridge> at device 31.0 on pci0
>> pci2: <PCI bus> on pcib2
>> acpi_button0: <Power Button> on acpi0
>> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>> uart0: [FILTER]
>> pmtimer0 on isa0
>> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd9fff pnpid
>> ORM0000 on isa0
>> sc0: <System console> at flags 0x100 on isa0
>> sc0: VGA <16 virtual consoles, flags=0x300>
>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>> kbd0 at atkbd0
>> atkbd0: [GIANT-LOCKED]
>> atkbd0: [ITHREAD]
>> p4tcc0: <CPU Frequency Thermal Control> on cpu0
>> RTC BIOS diagnostic error 80<clock_battery>
>> Timecounter "TSC" frequency 1200047958 Hz quality 800
>> Timecounters tick every 1.000 msec
>> usbus0: 12Mbps Full Speed USB v1.0
>> usbus1: 12Mbps Full Speed USB v1.0
>> usbus2: 12Mbps Full Speed USB v1.0
>> usbus3: 480Mbps High Speed USB v2.0
>> ad4: DMA limited to UDMA33, device found non-ATA66 cable
>> ad4: 953869MB <Seagate ST31000524AS JC45> at ata2-master UDMA33
>> ugen0.1: <SiS> at usbus0
>> uhub0: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>> ugen1.1: <SiS> at usbus1
>> uhub1: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>> ugen2.1: <SiS> at usbus2
>> uhub2: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>> ugen3.1: <SiS> at usbus3
>> uhub3: <SiS EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>> GEOM: ad4: partition 4 does not start on a track boundary.
>> GEOM: ad4: partition 4 does not end on a track boundary.
>> GEOM: ad4s4: geometry does not match label (255h,63s != 16h,63s).
>> uhub2: 2 ports with 2 removable, self powered
>> uhub0: 3 ports with 3 removable, self powered
>> uhub1: 3 ports with 3 removable, self powered
>> Root mount waiting for: usbus3
>> Root mount waiting for: usbus3
>> Root mount waiting for: usbus3
>> uhub3: 8 ports with 8 removable, self powered
>> Trying to mount root from nfs:
>> NFS ROOT: 94.23.28.232:/home/pub/bsd8-rescue-ovh
>> arp: 94.23.28.250 moved from 00:30:48:83:00:5c to 00:00:0c:9f:f0:01 on sis0
>> arp: 94.23.28.250 moved from 00:00:0c:9f:f0:01 to 00:30:48:83:00:5c on sis0
>> Waiting (max 60 seconds) for system process `vnlru' to stop...done
>> Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
>> Waiting (max 60 seconds) for system process `syncer' to stop...
>> Syncing disks, vnodes remaining...0 0 0 done
>> All buffers synced.
>> Uptime: 5m0s
>> Rebooting...
>> Copyright (c) 1992-2011 The FreeBSD Project.
>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>>        The Regents of the University of California. All rights reserved.
>> FreeBSD is a registered trademark of The FreeBSD Foundation.
>> FreeBSD 8.2-RELEASE #0: Fri Feb 18 02:24:46 UTC 2011
>>    root@...:/usr/obj/usr/src/sys/GENERIC i386
>> Timecounter "i8254" frequency 1193182 Hz quality 0
>> CPU: Intel(R) Celeron(R) CPU          220  @ 1.20GHz (1200.05-MHz 686-class
>> CPU)
>>  Origin = "GenuineIntel"  Id = 0x10661  Family = 6  Model = 16  Stepping =
>> 1
>>
>>  Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
>>  Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
>>  AMD Features=0x20100000<NX,LM>
>>  AMD Features2=0x1<LAHF>
>>  TSC: P-state invariant
>> real memory  = 2147483648 (2048 MB)
>> avail memory = 2052349952 (1957 MB)
>> ACPI APIC Table: <INTEL  DG965CO >
>> ioapic0: Changing APIC ID to 4
>> ioapic0 <Version 1.4> irqs 0-23 on motherboard
>> kbd1 at kbdmux0
>> acpi0: <INTEL DG965CO> on motherboard
>> acpi0: [ITHREAD]
>> acpi0: Power Button (fixed)
>> acpi0: reservation of 0, a0000 (3) failed
>> acpi0: reservation of 100000, 7df00000 (3) failed
>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>> cpu0: <ACPI CPU> on acpi0
>> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem
>> 0xfff00000-0xffffffff on acpi0
>> pci0: <ACPI PCI bus> on pcib0
>> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>> pci1: <ACPI PCI bus> on pcib1
>> vgapci0: <VGA-compatible display> port 0x1000-0x107f mem
>> 0x80000000-0x87ffffff,0x8a000000-0x8a01ffff irq 16 at device 0.0 on
>> pci1
>> isab0: <PCI-ISA bridge> at device 2.0 on pci0
>> isa0: <ISA bus> on isab0
>> atapci0: <SiS 964 UDMA133 controller> port
>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2490-0x249f at device 2.5 on
>> pci0
>> ata0: <ATA channel 0> on atapci0
>> ata0: [ITHREAD]
>> ata1: <ATA channel 1> on atapci0
>> ata1: [ITHREAD]
>> ohci0: <SiS 5571 USB controller> mem 0x8a104000-0x8a104fff irq 20 at
>> device 3.0 on pci0
>> ohci0: [ITHREAD]
>> usbus0: <SiS 5571 USB controller> on ohci0
>> ohci1: <SiS 5571 USB controller> mem 0x8a103000-0x8a103fff irq 21 at
>> device 3.1 on pci0
>> ohci1: [ITHREAD]
>> usbus1: <SiS 5571 USB controller> on ohci1
>> ohci2: <SiS 5571 USB controller> mem 0x8a102000-0x8a102fff irq 22 at
>> device 3.2 on pci0
>> ohci2: [ITHREAD]
>> usbus2: <SiS 5571 USB controller> on ohci2
>> ehci0: <EHCI (generic) USB 2.0 controller> mem 0x8a101000-0x8a101fff
>> irq 23 at device 3.3 on pci0
>> ehci0: [ITHREAD]
>> usbus3: waiting for BIOS to give up control
>> usbus3: timed out waiting for BIOS
>> usbus3: EHCI version 1.0
>> usbus3: <EHCI (generic) USB 2.0 controller> on ehci0
>> sis0: <SiS 900 10/100BaseTX> port 0x2000-0x20ff mem
>> 0x8a100000-0x8a100fff irq 19 at device 4.0 on pci0
>> miibus0: <MII bus> on sis0
>> ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
>> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>> sis0: Ethernet address: 00:1c:c0:82:92:13
>> sis0: [ITHREAD]
>> atapci1: <SiS 964 UDMA133 controller> port
>>
>> 0x24a8-0x24af,0x24b4-0x24b7,0x24a0-0x24a7,0x24b0-0x24b3,0x2480-0x248f,0x2400-0x247f
>> irq 17 at device 5.0 on pci0
>> atapci1: [ITHREAD]
>> ata2: <ATA channel 0> on atapci1
>> ata2: [ITHREAD]
>> ata3: <ATA channel 1> on atapci1
>> ata3: [ITHREAD]
>> pcib2: <PCI-PCI bridge> at device 31.0 on pci0
>> pci2: <PCI bus> on pcib2
>> acpi_button0: <Power Button> on acpi0
>> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
>> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>> uart0: [FILTER]
>> pmtimer0 on isa0
>> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd9fff pnpid
>> ORM0000 on isa0
>> sc0: <System console> at flags 0x100 on isa0
>> sc0: VGA <16 virtual consoles, flags=0x300>
>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>> atkbd0: <AT Keyboard> irq 1 on atkbdc0
>> kbd0 at atkbd0
>> atkbd0: [GIANT-LOCKED]
>> atkbd0: [ITHREAD]
>> ppc0: parallel port not found.
>> p4tcc0: <CPU Frequency Thermal Control> on cpu0
>> RTC BIOS diagnostic error 80<clock_battery>
>> Timecounter "TSC" frequency 1200047022 Hz quality 800
>> Timecounters tick every 1.000 msec
>> usbus0: 12Mbps Full Speed USB v1.0
>> usbus1: 12Mbps Full Speed USB v1.0
>> usbus2: 12Mbps Full Speed USB v1.0
>> usbus3: 480Mbps High Speed USB v2.0
>> ad4: DMA limited to UDMA33, device found non-ATA66 cable
>> ad4: 953869MB <Seagate ST31000524AS JC45> at ata2-master UDMA33
>> ugen0.1: <SiS> at usbus0
>> uhub0: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
>> ugen1.1: <SiS> at usbus1
>> uhub1: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
>> ugen2.1: <SiS> at usbus2
>> uhub2: <SiS OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
>> ugen3.1: <SiS> at usbus3
>> uhub3: <SiS EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
>> uhub2: 2 ports with 2 removable, self powered
>> uhub0: 3 ports with 3 removable, self powered
>> uhub1: 3 ports with 3 removable, self powered
>> Root mount waiting for: usbus3
>> Root mount waiting for: usbus3
>> Root mount waiting for: usbus3
>> uhub3: 8 ports with 8 removable, self powered
>> Trying to mount root from ufs:/dev/ad4s1a
>> arp: 94.23.28.250 moved from 00:30:48:83:00:5c to 00:00:0c:9f:f0:01 on sis0
>> arp: 94.23.28.250 moved from 00:00:0c:9f:f0:01 to 00:30:48:83:00:5c on sis0
>> arp: 94.23.28.251 moved from 00:30:48:82:fe:20 to 00:00:0c:9f:f0:01 on sis0
>> arp: 94.23.28.251 moved from 00:00:0c:9f:f0:01 to 00:30:48:82:fe:20 on sis0
>>
>> ________________________________
>> French OpenBSD mailing list
>> misc@...
>> http://www.openbsd-france.org/communaute.php
>>
>>
>