Re: OR1200 porting MP3 problem

> Hi Anthony,
>
> This is an error message from the Or1ksim saying that it has no
> memory
> at location 80000000, so it can't load your code there. Have you
> configured a memory block at that location in your sim.cfg file?
> HTH,
> Jeremy
> -
> Tel: +44 (1202) 416955
> Cell: +44 (7970) 676050
> SkypeID: jeremybennett
> Email: jeremy.bennett at embecosm.com
> Web: www.embecosm.com
> -----Original Message-----
> From: anthonyyi at msn.com
> Reply-To: List about OpenRISC project <openrisc at
> opencores.org>
> To: openrisc at opencores.org
> Subject: Re: [openrisc] OR1200 porting MP3 problem
> Date: Thu, 10 Jul 2008 05:35:47 +0200 (CEST)
> since I have downloaded the new tool chain from opencores web
> and run the newest cross compiler in a linux machine
> The previous problem have been sloved
> However I add something on the xess.ld as follows
>  .rodata :
>  {
>  *(.rodata)
>  *(.rodata.str1.1)
>  *(.rodata.cst4)
>  __etext = . ;
>  } > ram
> If not add these, the ld will give out some error information
> But I don't know whether is rigth to this.
> The linker can work correctly and generate the excutable file
> Now, the problem is coming when I use simulator:
> It will reports that:
> ERR: 8-bit program load out of memory area: 80000000
> ...
> ERR: 8-bit program load out of memory area: 80001d08
> ERR: 8-bit program load out of memory area: 80001d09
> ERR: 8-bit program load out of memory area: 80001d0a
> ERR: 8-bit program load out of memory area: 80001d0b
> ERR: 8-bit program load out of memory area: 80001d0c
> ERR: 8-bit program load out of memory area: 80001d0d
> when I use the decompiler to see the asm file
> Disassembly of section .text:
> 80000000 <__start>:
> 80000000: 9c 61 00 00 l.addi r3,r1,0x0
> 80000004: 00 00 2a f6 l.j 8000abdc <__uClibc_start>
> 80000008: 15 00 00 00 l.nop 0x0
> 8000000c <_report1>:
> 8000000c: 9c 21 ff e8 l.addi r1,r1,0xffffffe8
> 80000010: d4 01 10 00 l.sw 0x0(r1),r2
> 80000014: 9c 41 00 18 l.addi r2,r1,0x18
> 80000018: d7 e2 1f f8 l.sw 0xfffffff8(r2),r3
> 8000001c: 9c 60 12 34 l.addi r3,r0,0x1234
> 80000020: d7 e2 1f f4 l.sw 0xfffffff4(r2),r3
> 80000024: 84 82 ff f4 l.lwz r4,0xfffffff4(r2)
> 80000028: d7 e2 27 fc l.sw 0xfffffffc(r2),r4
> I don't know why this is happen
> So any can help
> Thank you deeply
> ----- Original Message -----
> From: anthonyyi<anthonyyi at m...>
> To:
> Date: Sun Jul 6 10:13:55 CEST 2008
> Subject: [openrisc] OR1200 porting MP3 problem
> > Actually I find the compiler command using for compile mp3 is
> :
> > or32-rtems-gcc/or32-rtems-as/or32-rtems-sr/
> > However, I haven't porting the rtems system to my envirment
> yet(
> > Cgywin in
> > Windows XP)
> > I try to use or32-uclinx-* commands to replace those commands
> > Then it gives out errors as follows:
> > /opt/or32-uclinux/lib/gcc-lib/or32-uclinux/
> > 3.1/../../../../or32-uclinx/bin/ld:
> > canot find -lc
> > collect2 ld returned 1 exit status
> > make[1]: *** [minmad] errror1
> > BTY, I modified the _ANSI file there is no sys/config.h/ in my
> > directory
> > I think the xess-mad project is porting by the rtems group.
> > Who have complied this project successfully can give me some
> > advice?
> > Thanks a lot
> > Anthony Y
> > make[1]: Leaving directory `/home/new/or1k/mp3/sw/mad-xess'
> > -- > View this message in context: >
>