On another note, please try document any configuration file changes you need to make. Ideally as a diff/patch to optware/make/cups.mk, but at least on a wiki page. This is so that it can be integrated in the next build.
Thanks,
-Brian
--- In
nslu2-linux@..., "phild_mande" <father_mande@...> wrote:
>
> --- In
nslu2-linux@..., "Brian Zhou" <b88zhou@> wrote:
> >
> > Please re-test with 1.3.10-2.
> >
> > I made the change to turn off stack-protector in gcc compilation option.
> >
> > Regards,
> >
> > -Brian
>
> Hi Brian,
>
> I have successfully tested on TS-x19 (119 & 219 model) cups and all work fine, even if we have to modify some path in foomatic-rip to add the /opt/bin and /opt/lib/cups/filter ...
>
> I now try to do the same things with a TS-109 (previous series that used the feed
http://ipkg.nslu2-linux.org/feeds/optware/cs06q3armel/cross/unstable/ and not the feed used by TS-x19 :
http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable/>
> Or we have always seg. fault, so my question is :
> did you do the same job for the cs06q3armel feed ?, to understand if it's another probleme or just a compilation diff.
>
> Thanks a lot, great job, you really help us .
>
> Philippe.
>
