Re: Problems with FreeBSD installation
|
View:
New views
6 Messages
—
Rating Filter:
Alert me
|
 |
|
|
|
Re: Problems with FreeBSD installation
by Miguel-69
::
Rate this Message:
On Thu, Aug 6, 2009 at 1:47 AM, Mel
Flynn<mel.flynn+fbsd.questions@...> wrote: > Your best bet is to poll the mobile list (CC'd) to see if anyone was able to > get FreeBSD working on this laptop (or even to know whether this is a lost > cause till somebody makes some patches for this laptop). Since 7.2 also does > not work and with 8.0-RELEASE being in it's final stages, it's unlikely you > can get some priority from the developers for it being a regression bug. The > acpi and missing disk can be related (most likely are), but unless you get at > least a live FS working (even the USB image for 8.0-BETA2) it will be hard to > get an acpidump(8). So this really depends on "someone knowledgeable having > this laptop" or BIOS tricks that get you to a stage where more info can be > gathered and saved/snapshot. Ok, I understand chances to have it running in the short term are not high :-) Anyway, and since I am replying to the mobile list, I am available to provide more information about the laptop. I have Linux running on it and I believe there is something similar to the acpidump (not sure if its the same tool as in FreeBSD or if their outputs are compatible) that I could use to provide some more details. Regards, Miguel _______________________________________________ freebsd-mobile@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@..." |
|
|
RE: Problems with FreeBSD installation
by Ben Fallon
::
Rate this Message:
What model of laptop is it? I just subscribed to the list yesterday and may have missed the beginning of this thread.
You can also check here http://laptop.bsdgroup.de/freebsd/ It provides details for a bunch of laptops and what the findings were for the models they tested. On Linux, a simple dmesg will help on seeing what devices were found by your os otherwise, like BSD, the lspci also works the same. Sorry I can't help more without a bit more information. -----Original Message----- From: luis.henrix@... [mailto:owner-freebsd-mobile@...] On Behalf Of Miguel Sent: Thursday, August 06, 2009 4:26 AM To: Mel Flynn Cc: freebsd-questions@...; freebsd-mobile@... Subject: Re: Problems with FreeBSD installation On Thu, Aug 6, 2009 at 1:47 AM, Mel Flynn<mel.flynn+fbsd.questions@...> wrote: > Your best bet is to poll the mobile list (CC'd) to see if anyone was > able to get FreeBSD working on this laptop (or even to know whether > this is a lost cause till somebody makes some patches for this > laptop). Since 7.2 also does not work and with 8.0-RELEASE being in > it's final stages, it's unlikely you can get some priority from the > developers for it being a regression bug. The acpi and missing disk > can be related (most likely are), but unless you get at least a live > FS working (even the USB image for 8.0-BETA2) it will be hard to get > an acpidump(8). So this really depends on "someone knowledgeable > having this laptop" or BIOS tricks that get you to a stage where more info can be gathered and saved/snapshot. Ok, I understand chances to have it running in the short term are not high :-) Anyway, and since I am replying to the mobile list, I am available to provide more information about the laptop. I have Linux running on it and I believe there is something similar to the acpidump (not sure if its the same tool as in FreeBSD or if their outputs are compatible) that I could use to provide some more details. Regards, Miguel _______________________________________________ freebsd-mobile@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@..." _______________________________________________ freebsd-mobile@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@..." |
|
|
Re: Problems with FreeBSD installation
by Miguel-69
::
Rate this Message:
On Thu, Aug 6, 2009 at 2:25 PM, Ben Fallon<bfallon@...> wrote:
> What model of laptop is it? I just subscribed to the list yesterday and may have missed the beginning of this thread. > You can also check here http://laptop.bsdgroup.de/freebsd/ > It provides details for a bunch of laptops and what the findings were for the models they tested. > On Linux, a simple dmesg will help on seeing what devices were found by your os otherwise, like BSD, > the lspci also works the same. Sorry I can't help more without a bit more information. The complete thread can be read here: http://lists.freebsd.org/pipermail/freebsd-questions/2009-August/203491.html My laptop is a Toshiba Satellite A210-1CE, and I am attaching the information you requested: the output from "lspci -v" and dmesg. Hope it helps :-) Regards, Miguel [ 0.000000] BIOS EBDA/lowmem at: 0009dc00/0009dc00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-14-generic (buildd@yellow) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #47-Ubuntu SMP Sat Jul 25 01:19:55 UTC 2009 (Ubuntu 2.6.28-14.47-generic) [ 0.000000] Command line: root=UUID=bc204d8d-c447-4ae6-9c0e-8b0f377d707c ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe70000 (usable) [ 0.000000] BIOS-e820: 000000007fe70000 - 000000007fe83000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fe83000 - 000000007fe85000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fe85000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x7fe70 max_arch_pfn = 0x3ffffffff [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000008000 (usable) [ 0.000000] modified: 0000000000008000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000090c00 (usable) [ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fe70000 (usable) [ 0.000000] modified: 000000007fe70000 - 000000007fe83000 (ACPI data) [ 0.000000] modified: 000000007fe83000 - 000000007fe85000 (ACPI NVS) [ 0.000000] modified: 000000007fe85000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] init_memory_mapping: 0000000000000000-000000007fe70000 [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fe70000 page 4k [ 0.000000] kernel direct mapping tables up to 7fe70000 @ 10000-14000 [ 0.000000] last_map_addr: 7fe70000 end: 7fe70000 [ 0.000000] RAMDISK: 3785c000 - 37fef5fb [ 0.000000] ACPI: RSDP 000F7260, 0024 (r2 TOSCPL) [ 0.000000] ACPI: XSDT 7FE7AA18, 0064 (r1 TOSCPL TOSCPL00 6040000 LTP 0) [ 0.000000] ACPI: FACP 7FE828F7, 00F4 (r3 TOSCPL Herring 6040000 ATI F4240) [ 0.000000] ACPI: DSDT 7FE7AA7C, 7E7B (r1 TOSCPL SB600 6040000 MSFT 3000000) [ 0.000000] ACPI: FACS 7FE84FC0, 0040 [ 0.000000] ACPI: TCPA 7FE82A5F, 0032 (r2 TOSCPL 6040000 PTEC 0) [ 0.000000] ACPI: SLIC 7FE82A91, 0176 (r1 TOSCPL TOSCPL00 6040000 LOHR 0) [ 0.000000] ACPI: SSDT 7FE82C07, 0206 (r1 PTLTD POWERNOW 6040000 LTP 1) [ 0.000000] ACPI: APIC 7FE82E0D, 0054 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: MCFG 7FE82E61, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET 7FE82E9D, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: ASF! 7FE82ED5, 012B (r32 DMA AMDTBL 6040000 PTL 1) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 007fe70000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000b7bbb0] TEXT DATA BSS ==> [0000200000 - 0000b7bbb0] [ 0.000000] #3 [003785c000 - 0037fef5fb] RAMDISK ==> [003785c000 - 0037fef5fb] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000f7300] 000f7300 [ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x00000008 [ 0.000000] 0: 0x00000010 -> 0x00000090 [ 0.000000] 0: 0x00000100 -> 0x0007fe70 [ 0.000000] On node 0 totalpages: 523763 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2532 pages reserved [ 0.000000] DMA zone: 1383 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7107 pages used for memmap [ 0.000000] DMA32 zone: 512685 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: HPET id: 0x43538310 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000008000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000090000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514068 [ 0.000000] Kernel command line: root=UUID=bc204d8d-c447-4ae6-9c0e-8b0f377d707c ro [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1995.046 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004000] allocated 20971520 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Node 0: aperture @ fc7e000000 size 32 MB [ 0.004000] Aperture beyond 4GB. Ignoring. [ 0.004000] Memory: 2024440k/2095552k available (4748k kernel code, 500k absent, 69984k reserved, 2524k data, 532k init) [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.09 BogoMIPS (lpj=7980184) [ 0.004117] Security Framework initialized [ 0.004167] SELinux: Disabled at boot. [ 0.004222] AppArmor: AppArmor initialized [ 0.004273] Mount-cache hash table entries: 256 [ 0.004439] Initializing cgroup subsys ns [ 0.004488] Initializing cgroup subsys cpuacct [ 0.004534] Initializing cgroup subsys memory [ 0.004580] Initializing cgroup subsys freezer [ 0.004634] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004681] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004725] tseg: 007ff00000 [ 0.004727] CPU: Physical Processor ID: 0 [ 0.004771] CPU: Processor Core ID: 0 [ 0.004816] using C1E aware idle routine [ 0.006419] ACPI: Core revision 20080926 [ 0.008946] ACPI: Checking initramfs for custom DSDT [ 0.312050] Setting APIC routing to flat [ 0.312473] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.316001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.316001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.316001] ..... (found apic 0 pin 0) ... [ 0.356790] ....... works. [ 0.356837] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 0.360001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3989.99 BogoMIPS (lpj=7979987) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.444136] CPU1: <6>System has AMD C1E enabled [ 0.004000] Switch to broadcast mode on CPU1 [ 0.444535] AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02 [ 0.444627] Brought up 2 CPUs [ 0.444672] Total of 2 processors activated (7980.08 BogoMIPS). [ 0.444759] CPU0 attaching sched-domain: [ 0.444761] domain 0: span 0-1 level CPU [ 0.444763] groups: 0 1 [ 0.444769] CPU1 attaching sched-domain: [ 0.444770] domain 0: span 0-1 level CPU [ 0.444772] groups: 1 0 [ 0.444832] Switch to broadcast mode on CPU0 [ 0.444832] net_namespace: 1400 bytes [ 0.444832] Booting paravirtualized kernel on bare hardware [ 0.444832] Time: 17:34:14 Date: 08/06/09 [ 0.444832] regulator: core version 0.5 [ 0.444832] NET: Registered protocol family 16 [ 0.444832] node 0 link 0: io port [1000, fffff] [ 0.444832] TOM: 0000000080000000 aka 2048M [ 0.444832] node 0 link 0: mmio [f8400000, ffffffff] [ 0.444832] node 0 link 0: mmio [f8300000, f83fffff] [ 0.444832] node 0 link 0: mmio [a0000, bffff] [ 0.444832] node 0 link 0: mmio [f0000000, f82fffff] [ 0.444832] node 0 link 0: mmio [e0000000, efffffff] [ 0.444832] node 0 link 0: mmio [80000000, dfffffff] [ 0.444832] bus: [00,ff] on node 0 link 0 [ 0.444832] bus: 00 index 0 io port: [0, ffff] [ 0.444832] bus: 00 index 1 mmio: [80000000, fcffffffff] [ 0.444832] bus: 00 index 2 mmio: [a0000, bffff] [ 0.444832] ACPI: bus type pci registered [ 0.444832] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 26 [ 0.444832] PCI: MCFG area at e0000000 reserved in E820 [ 0.446150] PCI: Using MMCONFIG at e0000000 - e1afffff [ 0.446199] PCI: Using configuration type 1 for base access [ 0.448838] ACPI: EC: Look up EC in DSDT [ 0.450994] ACPI Error (evregion-0315): No handler for Region [ERAM] (ffff88007f816d80) [EmbeddedControl] [20080926] [ 0.451129] ACPI Error (exfldio-0291): Region EmbeddedControl(3) has no handler [20080926] [ 0.451257] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.HTEV] (Node ffff88007f8145c0), AE_NOT_EXIST [ 0.451456] ACPI Error (psparse-0524): Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._REG] (Node ffff88007f81c960), AE_NOT_EXIST [ 0.453727] ACPI: BIOS _OSI(Linux) query ignored [ 0.456017] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.464095] ACPI: Interpreter enabled [ 0.464145] ACPI: (supports S0 S3 S4 S5) [ 0.464357] ACPI: Using IOAPIC for interrupt routing [ 0.524817] ACPI: EC: GPE = 0x13, I/O: command/status = 0x66, data = 0x62 [ 0.524868] ACPI: EC: driver started in interrupt mode [ 0.525050] ACPI: No dock devices found. [ 0.525106] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.526215] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.526263] pci 0000:00:02.0: PME# disabled [ 0.526330] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.526377] pci 0000:00:05.0: PME# disabled [ 0.526443] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.526490] pci 0000:00:06.0: PME# disabled [ 0.526555] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.526601] pci 0000:00:07.0: PME# disabled [ 0.526692] pci 0000:00:12.0: reg 10 io port: [0x8440-0x8447] [ 0.526699] pci 0000:00:12.0: reg 14 io port: [0x8434-0x8437] [ 0.526706] pci 0000:00:12.0: reg 18 io port: [0x8438-0x843f] [ 0.526713] pci 0000:00:12.0: reg 1c io port: [0x8430-0x8433] [ 0.526720] pci 0000:00:12.0: reg 20 io port: [0x8400-0x840f] [ 0.526728] pci 0000:00:12.0: reg 24 32bit mmio: [0xf8609000-0xf86093ff] [ 0.526746] pci 0000:00:12.0: set SATA to AHCI mode [ 0.526819] pci 0000:00:13.0: reg 10 32bit mmio: [0xf8604000-0xf8604fff] [ 0.526873] pci 0000:00:13.1: reg 10 32bit mmio: [0xf8605000-0xf8605fff] [ 0.526927] pci 0000:00:13.2: reg 10 32bit mmio: [0xf8606000-0xf8606fff] [ 0.526981] pci 0000:00:13.3: reg 10 32bit mmio: [0xf8607000-0xf8607fff] [ 0.527035] pci 0000:00:13.4: reg 10 32bit mmio: [0xf8608000-0xf8608fff] [ 0.527107] pci 0000:00:13.5: reg 10 32bit mmio: [0xf8609400-0xf86094ff] [ 0.527147] pci 0000:00:13.5: supports D1 D2 [ 0.527149] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.527197] pci 0000:00:13.5: PME# disabled [ 0.527286] pci 0000:00:14.0: reg 10 io port: [0x8410-0x841f] [ 0.527346] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7] [ 0.527353] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7] [ 0.527360] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.527368] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.527375] pci 0000:00:14.1: reg 20 io port: [0x8420-0x842f] [ 0.527426] pci 0000:00:14.2: reg 10 64bit mmio: [0xf8600000-0xf8603fff] [ 0.527461] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.527509] pci 0000:00:14.2: PME# disabled [ 0.527730] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.527735] pci 0000:01:00.0: reg 14 io port: [0x9000-0x90ff] [ 0.527741] pci 0000:01:00.0: reg 18 32bit mmio: [0xf8000000-0xf800ffff] [ 0.527756] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.527764] pci 0000:01:00.0: supports D1 D2 [ 0.527793] pci 0000:01:00.1: reg 10 32bit mmio: [0xf8010000-0xf8013fff] [ 0.527820] pci 0000:01:00.1: supports D1 D2 [ 0.527877] pci 0000:00:02.0: bridge io port: [0x9000-0x9fff] [ 0.527880] pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xf80fffff] [ 0.527884] pci 0000:00:02.0: bridge 64bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.527929] pci 0000:00:05.0: bridge io port: [0x00-0xfff] [ 0.527932] pci 0000:00:05.0: bridge 32bit mmio: [0x000000-0x0fffff] [ 0.527977] pci 0000:0e:00.0: reg 10 io port: [0xa000-0xa0ff] [ 0.527994] pci 0000:0e:00.0: reg 18 64bit mmio: [0xf8100000-0xf8100fff] [ 0.528015] pci 0000:0e:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.528025] pci 0000:0e:00.0: supports D1 D2 [ 0.528027] pci 0000:0e:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.528075] pci 0000:0e:00.0: PME# disabled [ 0.528171] pci 0000:00:06.0: bridge io port: [0xa000-0xafff] [ 0.528174] pci 0000:00:06.0: bridge 32bit mmio: [0xf8100000-0xf81fffff] [ 0.528215] pci 0000:14:00.0: reg 10 64bit mmio: [0xf8200000-0xf820ffff] [ 0.528304] pci 0000:00:07.0: bridge 32bit mmio: [0xf8200000-0xf82fffff] [ 0.528357] pci 0000:1a:04.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff] [ 0.528370] pci 0000:1a:04.0: supports D1 D2 [ 0.528371] pci 0000:1a:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.528421] pci 0000:1a:04.0: PME# disabled [ 0.528510] pci 0000:1a:04.1: reg 10 32bit mmio: [0xf8302000-0xf83027ff] [ 0.528519] pci 0000:1a:04.1: reg 14 32bit mmio: [0xf8304000-0xf8307fff] [ 0.528566] pci 0000:1a:04.1: supports D1 D2 [ 0.528568] pci 0000:1a:04.1: PME# supported from D0 D1 D2 D3hot [ 0.528618] pci 0000:1a:04.1: PME# disabled [ 0.528705] pci 0000:1a:04.2: reg 10 32bit mmio: [0xf8301000-0xf8301fff] [ 0.528756] pci 0000:1a:04.2: supports D1 D2 [ 0.528758] pci 0000:1a:04.2: PME# supported from D0 D1 D2 D3hot [ 0.528807] pci 0000:1a:04.2: PME# disabled [ 0.528894] pci 0000:1a:04.3: reg 10 32bit mmio: [0xf8302800-0xf83028ff] [ 0.528946] pci 0000:1a:04.3: supports D1 D2 [ 0.528947] pci 0000:1a:04.3: PME# supported from D0 D1 D2 D3hot [ 0.528996] pci 0000:1a:04.3: PME# disabled [ 0.529098] pci 0000:00:14.4: transparent bridge [ 0.529148] pci 0000:00:14.4: bridge 32bit mmio: [0xf8300000-0xf83fffff] [ 0.529185] bus 00 -> node 0 [ 0.529191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.529414] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT] [ 0.529560] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 0.529703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 0.529848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] [ 0.529990] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT] [ 0.530149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.533848] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 0.534268] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 0.534685] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 0.535104] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 0.535521] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 0.535938] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 0.536342] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 0.536761] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 0.537247] ACPI: WMI: Mapper loaded [ 0.540103] SCSI subsystem initialized [ 0.540156] libata version 3.00 loaded. [ 0.540156] usbcore: registered new interface driver usbfs [ 0.540156] usbcore: registered new interface driver hub [ 0.540156] usbcore: registered new device driver usb [ 0.540156] PCI: Using ACPI for IRQ routing [ 0.540156] pci 0000:00:05.0: BAR 7: can't allocate resource [ 0.540156] pci 0000:00:05.0: BAR 8: can't allocate resource [ 0.552009] Bluetooth: Core ver 2.13 [ 0.556012] NET: Registered protocol family 31 [ 0.556058] Bluetooth: HCI device and connection manager initialized [ 0.556105] Bluetooth: HCI socket layer initialized [ 0.556151] NET: Registered protocol family 8 [ 0.556196] NET: Registered protocol family 20 [ 0.556254] NetLabel: Initializing [ 0.556298] NetLabel: domain hash size = 128 [ 0.556343] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.556400] NetLabel: unlabeled traffic allowed by default [ 0.556657] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.556894] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.560073] AppArmor: AppArmor Filesystem Enabled [ 0.568022] Switched to high resolution mode on CPU 0 [ 0.568040] Switched to high resolution mode on CPU 1 [ 0.573029] pnp: PnP ACPI init [ 0.573083] ACPI: bus type pnp registered [ 0.600196] pnp: PnP ACPI: found 11 devices [ 0.600245] ACPI: ACPI bus type pnp unregistered [ 0.600299] system 00:01: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.600346] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.600397] system 00:08: ioport range 0x1080-0x1080 has been reserved [ 0.600444] system 00:08: ioport range 0x220-0x22f has been reserved [ 0.600489] system 00:08: ioport range 0x40b-0x40b has been reserved [ 0.600535] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.600581] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.600627] system 00:08: ioport range 0x530-0x537 has been reserved [ 0.600673] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 0.600719] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 0.600765] system 00:08: ioport range 0xc50-0xc52 has been reserved [ 0.600811] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 0.600857] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 0.600903] system 00:08: ioport range 0xcd0-0xcd1 has been reserved [ 0.600949] system 00:08: ioport range 0xcd2-0xcd3 has been reserved [ 0.600995] system 00:08: ioport range 0xcd4-0xcd5 has been reserved [ 0.601059] system 00:08: ioport range 0xcd6-0xcd7 has been reserved [ 0.601105] system 00:08: ioport range 0xcd8-0xcdf has been reserved [ 0.601152] system 00:08: ioport range 0x8000-0x805f has been reserved [ 0.601198] system 00:08: ioport range 0xf40-0xf47 has been reserved [ 0.601245] system 00:08: ioport range 0x87f-0x87f has been reserved [ 0.601292] system 00:08: ioport range 0xfd60-0xfddf has been reserved [ 0.601342] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 0.601389] system 00:09: iomem range 0xfff00000-0xffffffff has been reserved [ 0.606165] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.606212] pci 0000:00:02.0: IO window: 0x9000-0x9fff [ 0.606259] pci 0000:00:02.0: MEM window: 0xf8000000-0xf80fffff [ 0.606306] pci 0000:00:02.0: PREFETCH window: 0x000000f0000000-0x000000f7ffffff [ 0.606359] pci 0000:00:05.0: PCI bridge, secondary bus 0000:08 [ 0.606404] pci 0000:00:05.0: IO window: disabled [ 0.606451] pci 0000:00:05.0: MEM window: disabled [ 0.606497] pci 0000:00:05.0: PREFETCH window: disabled [ 0.606544] pci 0000:00:06.0: PCI bridge, secondary bus 0000:0e [ 0.606591] pci 0000:00:06.0: IO window: 0xa000-0xafff [ 0.606637] pci 0000:00:06.0: MEM window: 0xf8100000-0xf81fffff [ 0.606684] pci 0000:00:06.0: PREFETCH window: 0x0000008c000000-0x0000008c0fffff [ 0.606737] pci 0000:00:07.0: PCI bridge, secondary bus 0000:14 [ 0.606782] pci 0000:00:07.0: IO window: disabled [ 0.606829] pci 0000:00:07.0: MEM window: 0xf8200000-0xf82fffff [ 0.606876] pci 0000:00:07.0: PREFETCH window: disabled [ 0.606926] pci 0000:1a:04.0: CardBus bridge, secondary bus 0000:1b [ 0.606972] pci 0000:1a:04.0: IO window: 0x002000-0x0020ff [ 0.607021] pci 0000:1a:04.0: IO window: 0x002400-0x0024ff [ 0.607070] pci 0000:1a:04.0: PREFETCH window: 0x88000000-0x8bffffff [ 0.607119] pci 0000:1a:04.0: MEM window: 0x90000000-0x93ffffff [ 0.607168] pci 0000:00:14.4: PCI bridge, secondary bus 0000:1a [ 0.607215] pci 0000:00:14.4: IO window: 0x2000-0x2fff [ 0.607265] pci 0000:00:14.4: MEM window: 0xf8300000-0xf83fffff [ 0.607314] pci 0000:00:14.4: PREFETCH window: 0x00000088000000-0x0000008bffffff [ 0.607376] pci 0000:00:02.0: setting latency timer to 64 [ 0.607382] pci 0000:00:05.0: setting latency timer to 64 [ 0.607387] pci 0000:00:06.0: setting latency timer to 64 [ 0.607392] pci 0000:00:07.0: setting latency timer to 64 [ 0.607409] pci 0000:1a:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.607461] bus: 00 index 0 io port: [0x00-0xffff] [ 0.607507] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.607553] bus: 01 index 0 io port: [0x9000-0x9fff] [ 0.607599] bus: 01 index 1 mmio: [0xf8000000-0xf80fffff] [ 0.607645] bus: 01 index 2 mmio: [0xf0000000-0xf7ffffff] [ 0.607690] bus: 01 index 3 mmio: [0x0-0x0] [ 0.607736] bus: 08 index 0 mmio: [0x0-0xfff] [ 0.607781] bus: 08 index 1 mmio: [0x0-0xfffff] [ 0.607827] bus: 08 index 2 mmio: [0x0-0x0] [ 0.607872] bus: 08 index 3 mmio: [0x0-0x0] [ 0.607917] bus: 0e index 0 io port: [0xa000-0xafff] [ 0.607963] bus: 0e index 1 mmio: [0xf8100000-0xf81fffff] [ 0.608011] bus: 0e index 2 mmio: [0x8c000000-0x8c0fffff] [ 0.608069] bus: 0e index 3 mmio: [0x0-0x0] [ 0.608114] bus: 14 index 0 mmio: [0x0-0x0] [ 0.608160] bus: 14 index 1 mmio: [0xf8200000-0xf82fffff] [ 0.608206] bus: 14 index 2 mmio: [0x0-0x0] [ 0.608251] bus: 14 index 3 mmio: [0x0-0x0] [ 0.608296] bus: 1a index 0 io port: [0x2000-0x2fff] [ 0.608342] bus: 1a index 1 mmio: [0xf8300000-0xf83fffff] [ 0.608388] bus: 1a index 2 mmio: [0x88000000-0x8bffffff] [ 0.608434] bus: 1a index 3 io port: [0x00-0xffff] [ 0.608479] bus: 1a index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.608525] bus: 1b index 0 io port: [0x2000-0x20ff] [ 0.608571] bus: 1b index 1 io port: [0x2400-0x24ff] [ 0.608617] bus: 1b index 2 mmio: [0x88000000-0x8bffffff] [ 0.608663] bus: 1b index 3 mmio: [0x90000000-0x93ffffff] [ 0.608718] NET: Registered protocol family 2 [ 0.641076] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.641561] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.643658] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.644263] TCP: Hash tables configured (established 262144 bind 65536) [ 0.644314] TCP reno registered [ 0.653108] NET: Registered protocol family 1 [ 0.653274] checking if image is initramfs... it is [ 1.241118] Freeing initrd memory: 7757k freed [ 1.245486] audit: initializing netlink socket (disabled) [ 1.245547] type=2000 audit(1249580053.244:1): initialized [ 1.253689] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.255064] VFS: Disk quotas dquot_6.5.1 [ 1.255166] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.255839] fuse init (API version 7.10) [ 1.255971] msgmni has been set to 3970 [ 1.256222] alg: No test for stdrng (krng) [ 1.256281] io scheduler noop registered [ 1.256328] io scheduler anticipatory registered [ 1.256373] io scheduler deadline registered [ 1.256461] io scheduler cfq registered (default) [ 1.256623] pci 0000:01:00.0: Boot video device [ 1.304281] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 1.304301] pcieport-driver 0000:00:02.0: found MSI capability [ 1.304367] pcieport-driver 0000:00:02.0: irq 2303 for MSI/MSI-X [ 1.304374] pci_express 0000:00:02.0:pcie00: allocate port service [ 1.304390] pci_express 0000:00:02.0:pcie03: allocate port service [ 1.304426] pcieport-driver 0000:00:05.0: setting latency timer to 64 [ 1.304445] pcieport-driver 0000:00:05.0: found MSI capability [ 1.304505] pcieport-driver 0000:00:05.0: irq 2302 for MSI/MSI-X [ 1.304512] pci_express 0000:00:05.0:pcie00: allocate port service [ 1.304525] pci_express 0000:00:05.0:pcie02: allocate port service [ 1.304538] pci_express 0000:00:05.0:pcie03: allocate port service [ 1.304576] pcieport-driver 0000:00:06.0: setting latency timer to 64 [ 1.304595] pcieport-driver 0000:00:06.0: found MSI capability [ 1.304655] pcieport-driver 0000:00:06.0: irq 2301 for MSI/MSI-X [ 1.304662] pci_express 0000:00:06.0:pcie00: allocate port service [ 1.304676] pci_express 0000:00:06.0:pcie03: allocate port service [ 1.304711] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 1.304730] pcieport-driver 0000:00:07.0: found MSI capability [ 1.304790] pcieport-driver 0000:00:07.0: irq 2300 for MSI/MSI-X [ 1.304797] pci_express 0000:00:07.0:pcie00: allocate port service [ 1.304811] pci_express 0000:00:07.0:pcie03: allocate port service [ 1.304861] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.305061] pciehp 0000:00:05.0:pcie02: HPC vendor_id 1002 device_id 7915 ss_vid 0 ss_did 0 [ 1.305147] pciehp 0000:00:05.0:pcie02: service driver pciehp loaded [ 1.305158] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.309542] ACPI: AC Adapter [ACAD] (off-line) [ 1.452887] ACPI: Battery Slot [BAT1] (battery present) [ 1.453012] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.453071] ACPI: Power Button (FF) [PWRF] [ 1.453162] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.453273] ACPI: Lid Switch [LID] [ 1.453364] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 1.453419] ACPI: Power Button (CM) [PWRB] [ 1.453731] ACPI: processor limited to max C-state 1 [ 1.453825] processor ACPI_CPU:00: registered as cooling_device0 [ 1.454870] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.455032] processor ACPI_CPU:01: registered as cooling_device1 [ 1.505349] Linux agpgart interface v0.103 [ 1.505405] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.506353] brd: module loaded [ 1.506700] loop: module loaded [ 1.506824] Fixed MDIO Bus: probed [ 1.506875] PPP generic driver version 2.4.2 [ 1.506976] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 1.507058] Driver 'sd' needs updating - please use bus_type methods [ 1.507110] Driver 'sr' needs updating - please use bus_type methods [ 1.507186] ahci 0000:00:12.0: version 3.0 [ 1.507203] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.507284] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 1.507419] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.507472] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part [ 1.507949] scsi0 : ahci [ 1.508137] scsi1 : ahci [ 1.508266] scsi2 : ahci [ 1.508389] scsi3 : ahci [ 1.508528] ata1: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609100 irq 22 [ 1.508581] ata2: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609180 irq 22 [ 1.508633] ata3: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609200 irq 22 [ 1.508685] ata4: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609280 irq 22 [ 2.156034] ata1: softreset failed (device not ready) [ 2.156082] ata1: failed due to HW bug, retry pmp=0 [ 2.320044] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.699742] ata1.00: ATA-7: TOSHIBA MK2035GSS, DK020M, max UDMA/100 [ 2.699790] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.699852] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.701281] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.701328] ata1.00: configured for UDMA/100 [ 3.036043] ata2: SATA link down (SStatus 0 SControl 300) [ 3.372041] ata3: SATA link down (SStatus 0 SControl 300) [ 3.708043] ata4: SATA link down (SStatus 0 SControl 300) [ 3.724057] isa bounce pool size: 16 pages [ 3.724173] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2035GS DK02 PQ: 0 ANSI: 5 [ 3.724316] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB) [ 3.724384] sd 0:0:0:0: [sda] Write Protect is off [ 3.724430] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.724456] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.724579] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB) [ 3.724646] sd 0:0:0:0: [sda] Write Protect is off [ 3.724692] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.724716] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.724768] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 3.884583] sda1: <openbsd: sda7 sda8 sda9 sda10 sda11 sda12bad subpartition - ignored [ 3.884902] bad subpartition - ignored [ 3.884947] bad subpartition - ignored [ 3.884991] bad subpartition - ignored [ 3.885047] > [ 3.903229] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.903325] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.903653] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.903736] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 3.903825] scsi4 : pata_atiixp [ 3.903938] scsi5 : pata_atiixp [ 3.904809] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14 [ 3.904859] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15 [ 4.084508] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L632H, TO01, max UDMA/33 [ 4.116460] ata5.00: configured for UDMA/33 [ 4.274372] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H TO01 PQ: 0 ANSI: 5 [ 4.286465] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.286517] Uniform CD-ROM driver Revision: 3.20 [ 4.286672] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 4.286714] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 4.287172] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.287243] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 4.287309] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 4.287411] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 4.287491] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 4.287559] ehci_hcd 0000:00:13.5: debug port 1 [ 4.287622] ehci_hcd 0000:00:13.5: irq 19, io mem 0xf8609400 [ 4.296039] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 4.296161] usb usb1: configuration #1 chosen from 1 choice [ 4.296233] hub 1-0:1.0: USB hub found [ 4.296283] hub 1-0:1.0: 10 ports detected [ 4.296442] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 4.296503] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.296559] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 4.296642] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 4.296714] ohci_hcd 0000:00:13.0: irq 16, io mem 0xf8604000 [ 4.352106] usb usb2: configuration #1 chosen from 1 choice [ 4.352176] hub 2-0:1.0: USB hub found [ 4.352228] hub 2-0:1.0: 2 ports detected [ 4.352357] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.352416] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 4.352498] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 4.352570] ohci_hcd 0000:00:13.1: irq 17, io mem 0xf8605000 [ 4.408089] usb usb3: configuration #1 chosen from 1 choice [ 4.408160] hub 3-0:1.0: USB hub found [ 4.408212] hub 3-0:1.0: 2 ports detected [ 4.408340] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.408396] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 4.408481] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 4.408553] ohci_hcd 0000:00:13.2: irq 18, io mem 0xf8606000 [ 4.464097] usb usb4: configuration #1 chosen from 1 choice [ 4.464165] hub 4-0:1.0: USB hub found [ 4.464217] hub 4-0:1.0: 2 ports detected [ 4.464340] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.464396] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 4.464478] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 4.464544] ohci_hcd 0000:00:13.3: irq 17, io mem 0xf8607000 [ 4.520105] usb usb5: configuration #1 chosen from 1 choice [ 4.520174] hub 5-0:1.0: USB hub found [ 4.520227] hub 5-0:1.0: 2 ports detected [ 4.520350] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.520405] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 4.520490] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 4.520556] ohci_hcd 0000:00:13.4: irq 18, io mem 0xf8608000 [ 4.576094] usb usb6: configuration #1 chosen from 1 choice [ 4.576162] hub 6-0:1.0: USB hub found [ 4.576214] hub 6-0:1.0: 2 ports detected [ 4.576344] uhci_hcd: USB Universal Host Controller Interface driver [ 4.576468] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 4.611122] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.611143] usb 1-8: new high speed USB device using ehci_hcd and address 2 [ 4.611230] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.621072] mice: PS/2 mouse device common for all mice [ 4.669090] rtc_cmos 00:04: RTC can wake from S4 [ 4.669170] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 4.669242] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 4.669344] device-mapper: uevent: version 1.0.3 [ 4.669505] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@... [ 4.669745] device-mapper: multipath: version 1.0.5 loaded [ 4.669792] device-mapper: multipath round-robin: version 1.0.0 loaded [ 4.670041] cpuidle: using governor ladder [ 4.670087] cpuidle: using governor menu [ 4.670533] TCP cubic registered [ 4.670648] NET: Registered protocol family 10 [ 4.671060] lo: Disabled Privacy Extensions [ 4.671366] NET: Registered protocol family 17 [ 4.671432] Bluetooth: L2CAP ver 2.11 [ 4.671476] Bluetooth: L2CAP socket layer initialized [ 4.671522] Bluetooth: SCO (Voice Link) ver 0.6 [ 4.671566] Bluetooth: SCO socket layer initialized [ 4.671661] Bluetooth: RFCOMM socket layer initialized [ 4.671712] Bluetooth: RFCOMM TTY layer initialized [ 4.671757] Bluetooth: RFCOMM ver 1.10 [ 4.671851] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00) [ 4.671949] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x11 [ 4.671996] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12 [ 4.672060] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x13 [ 4.672106] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e [ 4.672278] registered taskstats version 1 [ 4.672478] Magic number: 5:295:592 [ 4.672614] rtc_cmos 00:04: setting system clock to 2009-08-06 17:34:18 UTC (1249580058) [ 4.672669] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 4.672714] EDD information not available. [ 4.672799] Freeing unused kernel memory: 532k freed [ 4.673088] Write protecting the kernel read-only data: 6688k [ 4.688864] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 4.757351] usb 1-8: configuration #1 chosen from 1 choice [ 4.928211] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.928282] r8169 0000:0e:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.928348] r8169 0000:0e:00.0: setting latency timer to 64 [ 4.928445] r8169 0000:0e:00.0: irq 2299 for MSI/MSI-X [ 4.928977] eth0: RTL8101e at 0xffffc20001bbc000, 00:1e:ec:3a:48:9f, XID 34200000 IRQ 2299 [ 4.986519] ohci1394 0000:1a:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 5.036349] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[f8302000-f83027ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 5.671362] PM: Starting manual resume from disk [ 5.671410] PM: Resume from partition 8:3 [ 5.671411] PM: Checking hibernation image. [ 5.671829] PM: Resume from disk failed. [ 5.705463] EXT4-fs: barriers enabled [ 5.722773] kjournald2 starting. Commit interval 5 seconds [ 5.722837] EXT4-fs: delayed allocation enabled [ 5.722882] EXT4-fs: file extents enabled [ 5.727982] EXT4-fs: mballoc enabled [ 5.728035] EXT4-fs: mounted filesystem with ordered data mode. [ 6.309216] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f85c040680f] [ 11.496138] udev: starting version 141 [ 11.775511] acpi device:04: registered as cooling_device2 [ 11.775894] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input5 [ 11.805205] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 11.988860] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 12.041825] sdhci: Secure Digital Host Controller Interface driver [ 12.041877] sdhci: Copyright(c) Pierre Ossman [ 12.065219] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0 [ 12.127776] Linux video capture interface: v2.00 [ 12.237096] cfg80211: Calling CRDA to update world regulatory domain [ 12.369314] sdhci-pci 0000:1a:04.3: SDHCI controller found [104c:803c] (rev 0) [ 12.369384] sdhci-pci 0000:1a:04.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 12.369576] mmc0: SDHCI controller on PCI [0000:1a:04.3] using DMA [ 12.410999] cfg80211: World regulatory domain updated: [ 12.411053] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.411103] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.411149] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.411195] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.411241] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.411287] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.421093] yenta_cardbus 0000:1a:04.0: CardBus bridge found [1179:ff00] [ 12.421164] yenta_cardbus 0000:1a:04.0: Enabling burst memory read transactions [ 12.421219] yenta_cardbus 0000:1a:04.0: Using CSCINT to route CSC interrupts to PCI [ 12.421269] yenta_cardbus 0000:1a:04.0: Routing CardBus interrupts to PCI [ 12.421319] yenta_cardbus 0000:1a:04.0: TI: mfunc 0x10a01b22, devctl 0x64 [ 12.655501] yenta_cardbus 0000:1a:04.0: ISA IRQ mask 0x0cf8, PCI irq 20 [ 12.655557] yenta_cardbus 0000:1a:04.0: Socket status: 30000006 [ 12.655605] pci_bus 0000:1a: Raising subordinate bus# of parent bus (#1a) from #1b to #1e [ 12.655663] yenta_cardbus 0000:1a:04.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 12.655716] yenta_cardbus 0000:1a:04.0: pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xf83fffff [ 12.655769] yenta_cardbus 0000:1a:04.0: pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff [ 12.720838] tifm_7xx1 0000:1a:04.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 12.799659] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 13.065920] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 13.067085] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:13.5/usb1/1-8/1-8:1.0/input/input7 [ 13.077285] usbcore: registered new interface driver uvcvideo [ 13.077356] USB Video Class driver (v0.1.0) [ 13.381158] ath5k_pci 0000:14:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 13.381223] ath5k_pci 0000:14:00.0: setting latency timer to 64 [ 13.381295] ath5k_pci 0000:14:00.0: registered as 'phy0' [ 13.456418] phy0: Selected rate control algorithm 'pid' [ 13.639754] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8 [ 13.657977] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.674661] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa2, PHY: 0x61) [ 13.696347] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS... [ 13.706425] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9 [ 13.763145] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 13.763255] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 14.018070] lp: driver loaded but no devices found [ 14.107036] Adding 2931852k swap on /dev/sda3. Priority:-1 extents:1 across:2931852k [ 14.130441] EXT4 FS on sda2, internal journal on sda2:8 [ 14.500226] EXT4-fs: barriers enabled [ 14.520430] kjournald2 starting. Commit interval 5 seconds [ 14.520876] EXT4 FS on sda6, internal journal on sda6:8 [ 14.520879] EXT4-fs: delayed allocation enabled [ 14.520880] EXT4-fs: file extents enabled [ 14.533226] EXT4-fs: mballoc enabled [ 14.533230] EXT4-fs: mounted filesystem with ordered data mode. [ 14.900363] type=1505 audit(1249580068.727:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2135 [ 14.948144] type=1505 audit(1249580068.775:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2139 [ 14.948280] type=1505 audit(1249580068.775:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2139 [ 14.948329] type=1505 audit(1249580068.775:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2139 [ 14.948371] type=1505 audit(1249580068.775:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2139 [ 15.080401] type=1505 audit(1249580068.907:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2144 [ 15.080582] type=1505 audit(1249580068.907:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2144 [ 15.110934] type=1505 audit(1249580068.935:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2148 [ 21.175786] ppdev: user-space parallel port driver [ 21.766652] pci 0000:01:00.0: power state changed by ACPI to D0 [ 21.766662] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 21.861785] [drm] Initialized drm 1.1.0 20060810 [ 21.900931] pci 0000:01:00.0: setting latency timer to 64 [ 21.901120] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 22.725040] [drm] Setting GART location based on new memory map [ 22.740333] [drm] Loading RV610 CP Microcode [ 22.740442] [drm] Loading RV610 PFP Microcode [ 22.755352] [drm] Resetting GPU [ 22.755410] [drm] writeback test succeeded in 1 usecs [ 25.172599] r8169: eth0: link down [ 25.173059] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.322290] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 45.103980] wlan0: authenticate with AP 00:21:29:65:c5:f4 [ 45.105499] wlan0: authenticated [ 45.105505] wlan0: associate with AP 00:21:29:65:c5:f4 [ 45.107803] wlan0: RX AssocResp from 00:21:29:65:c5:f4 (capab=0x431 status=0 aid=1) [ 45.107805] wlan0: associated [ 45.108326] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 46.503416] ath5k phy0: noise floor calibration timeout (2412MHz) [ 55.544023] wlan0: no IPv6 routers present [ 75.669568] ath5k phy0: noise floor calibration timeout (2412MHz) [ 83.000038] Clocksource tsc unstable (delta = -135348191 ns) [ 115.679723] ath5k phy0: noise floor calibration timeout (2412MHz) [ 175.679991] ath5k phy0: noise floor calibration timeout (2412MHz) [ 215.033016] APIC error on CPU1: 00(40) [ 215.033025] APIC error on CPU0: 00(40) 00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, 66MHz, medium devsel, latency 64 00:02.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Graphics Port 0) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: f8000000-f80fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7ffffff Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:05.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 1) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=08, subordinate=0d, sec-latency=0 Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: f8100000-f81fffff Prefetchable memory behind bridge: 000000008c000000-000000008c0fffff Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=14, subordinate=14, sec-latency=0 Memory behind bridge: f8200000-f82fffff Capabilities: <access denied> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA (prog-if 01) Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22 I/O ports at 8440 [size=8] I/O ports at 8434 [size=4] I/O ports at 8438 [size=8] I/O ports at 8430 [size=4] I/O ports at 8400 [size=16] Memory at f8609000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) (prog-if 10) Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at f8604000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) (prog-if 10) Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17 Memory at f8605000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) (prog-if 10) Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at f8606000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) (prog-if 10) Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17 Memory at f8607000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) (prog-if 10) Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at f8608000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) (prog-if 20) Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19 Memory at f8609400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) Subsystem: Toshiba America Info Systems Device ff00 Flags: 66MHz, medium devsel I/O ports at 8410 [size=16] Capabilities: <access denied> Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE (prog-if 8a [Master SecP PriP]) Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at 8420 [size=16] Kernel driver in use: pata_atiixp 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) Subsystem: Toshiba America Info Systems Device ff08 Flags: bus master, slow devsel, latency 64, IRQ 16 Memory at f8600000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=1a, subordinate=1e, sec-latency=64 I/O behind bridge: 00002000-00002fff Memory behind bridge: f8300000-f83fffff Prefetchable memory behind bridge: 88000000-8bffffff 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Flags: fast devsel Capabilities: <access denied> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Flags: fast devsel Capabilities: <access denied> Kernel driver in use: k8temp Kernel modules: k8temp 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon HD 2400 Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f0000000 (32-bit, prefetchable) [size=128M] I/O ports at 9000 [size=256] Memory at f8000000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at f8020000 [disabled] [size=128K] Capabilities: <access denied> 01:00.1 Audio device: ATI Technologies Inc RV610 audio device [Radeon HD 2400 PRO] Subsystem: ATI Technologies Inc RV610 audio device [Radeon HD 2400 PRO] Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at f8010000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 0e:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01) Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, fast devsel, latency 0, IRQ 2299 I/O ports at a000 [size=256] Memory at f8100000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 8c000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 14:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01) Subsystem: Askey Computer Corp. Device 7096 Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at f8200000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath5k_pci Kernel modules: ath_pci, ath5k 1a:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, medium devsel, latency 168, IRQ 20 Memory at f8300000 (32-bit, non-prefetchable) [size=4K] Bus: primary=1a, secondary=1b, subordinate=1e, sec-latency=176 Memory window 0: 88000000-8bfff000 (prefetchable) Memory window 1: 90000000-93fff000 I/O window 0: 00002000-000020ff I/O window 1: 00002400-000024ff 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus Kernel modules: yenta_socket 1a:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller (prog-if 10) Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at f8302000 (32-bit, non-prefetchable) [size=2K] Memory at f8304000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ohci1394 Kernel modules: firewire-ohci, ohci1394 1a:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at f8301000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: tifm_7xx1 Kernel modules: tifm_7xx1 1a:04.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller (prog-if 01) Subsystem: Toshiba America Info Systems Device ff00 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at f8302800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci _______________________________________________ freebsd-mobile@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@..." |
|
|
RE: Problems with FreeBSD installation
by Ben Fallon
::
Rate this Message:
Might want to take a look at this page as it may provide a bit more insight. The problem isn't with the Machine specifically but with the ATI Sata Controller/Chipset. Not sure if this has been fixed yet.
http://www.mavetju.org/mail/view_message.php?list=freebsd-current&id=2740699 -----Original Message----- From: Miguel [mailto:luis.henrix@...] Sent: Thursday, August 06, 2009 1:53 PM To: Ben Fallon Cc: freebsd-mobile@...; freebsd-questions@... Subject: Re: Problems with FreeBSD installation On Thu, Aug 6, 2009 at 2:25 PM, Ben Fallon<bfallon@...> wrote: > What model of laptop is it? I just subscribed to the list yesterday and may have missed the beginning of this thread. > You can also check here http://laptop.bsdgroup.de/freebsd/ > It provides details for a bunch of laptops and what the findings were for the models they tested. > On Linux, a simple dmesg will help on seeing what devices were found > by your os otherwise, like BSD, the lspci also works the same. Sorry I can't help more without a bit more information. The complete thread can be read here: http://lists.freebsd.org/pipermail/freebsd-questions/2009-August/203491.html My laptop is a Toshiba Satellite A210-1CE, and I am attaching the information you requested: the output from "lspci -v" and dmesg. Hope it helps :-) Regards, Miguel _______________________________________________ freebsd-mobile@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@..." |
|
|
Re: Problems with FreeBSD installation
by Miguel-69
::
Rate this Message:
On Thu, Aug 6, 2009 at 7:16 PM, Ben Fallon<bfallon@...> wrote:
> Might want to take a look at this page as it may provide a bit more insight. The problem isn't with the Machine specifically but with the ATI Sata Controller/Chipset. Not sure if this has been fixed yet. > > http://www.mavetju.org/mail/view_message.php?list=freebsd-current&id=2740699 Uau! That's exactly the same problem with the same hardware, and I would be tempted to say that it _has not_ been solved yet. I'll try to contact those guys to try to get some more information. Thanks a lot for the pointer, Ben. Regards, Miguel _______________________________________________ freebsd-mobile@... mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@..." |
| Free embeddable forum powered by Nabble | Forum Help |
