And here's a picture of the inside of the Expander showing some of the pots:
http://www.skkatter.net/expander_pots.jpg-S
2009/7/3 skkatter <
skkatter@...>:
> Hi,
>
> Any RSF Kobol Expander experts out there? I've got one here in mostly
> working order. The main problem is the VCO2 frequency potentiometer.
>
> The VCO1 frequency pot is working fine (apart from not outputting
> 440hz when turned to the 440hz mark but that's no major problem).
>
> However when I turn VCO2 right down to the left it should be
> outputting the lowest frequency, but instead it's outputting about
> 100Hz or so, it then shoots up to the highest when turned to the
> middle, and then suddenly down a bit and then climbs again as you turn
> it to the right. I can control OSC2 via CV fine, it responds correctly
> like OSC1.
>
> This sounds like a broken pot to me, but I'm an amateur and wanted to
> confirm with somebody else.
>
> Are the pots in the RSF Kobol Expander standard ones or special RSF only pots?
>
> Thanks,
> Stephen
> --
>
http://www.skkatter.net>
--
http://www.skkatter.net
