|
»
« Return to Thread: Re: CACTUS and Weblogic (10)
Re: Re: CACTUS and Weblogic (10)
by Frank Michael
::
Rate this Message:
Hello Adrian,
thx for the headsup, I already got it running using the weblogic8x tag as I didn't use the latest snapshot but I'll make sure to give it a shot with the snapshot, too.
Thx a bunch,
Michael
--- Adrian Cole <ferncam1@...> schrieb am Sa, 21.2.2009:
> Von: Adrian Cole <ferncam1@...>
> Betreff: Re: [cargo-user] Re: CACTUS and Weblogic (10)
> An: user@...
> Datum: Samstag, 21. Februar 2009, 1:58
> Hello.
>
> Based on the below, the user should specify weblogic103x
> and ensure they are
> using JDK 6.
>
> Note that latter versions of WebLogic are recent updates,
> so ensure the
> version of CARGO is 1.0-SNAPSHOT until we release a new
> Beta.
>
> Cheers,
> -Adrian Cole
>
>
> On Mon, Feb 16, 2009 at 10:19 AM, Frank Michael
> <much99@...> wrote:
>
> > Hey,
> >
> > sry for posting to the dev list before, moving it to
> the user list:
> >
> > Yes, I know I need cargo and I get the latest cactus
> released. All
> > classpaths are set up fine (I think) and I'm using
> your config but I get
> > this error:
> > org.codehaus.cargo.container.ContainerException:
> Cannot create
> > configuration. There's no registered configuration
> for the parameters
> > (container [id = [weblogic10x], type = [installed]],
> configuration type
> > [standalone]). Actually there are no valid types
> registered for this
> > configuration. Maybe you've made a mistake
> spelling it?
> >
> > I tried lots of different combinations, none of them
> is working, all of
> > them give the same error, which I can't find too
> much about neither in
> > google nor on this mailing list.
> > Also, unfortunatly, if I try to read up on
> Configurations on the cargo
> > website (http://cargo.codehaus.org/Configuration) I
> just get the following
> > error:
> > java.lang.Exception:
> >
> org.springframework.transaction.UnexpectedRollbackException:
> Transaction
> > rolled back because it has been marked as
> rollback-only
> >
> com.openxource.unity.providers.confluence.ConfluencePageProviderImpl.getPage(ConfluencePageProviderImpl.java:87)
> >
> >
> com.openxource.unity.beans.impl.UnityPageRendererImpl.getFragment(UnityPageRendererImpl.java:359)
> >
> >
> com.openxource.unity.beans.impl.UnityPageRendererImpl.renderPage(UnityPageRendererImpl.java:165)
> >
> >
> com.openxource.unity.servlets.ContentServlet.doGet(ContentServlet.java:101)
> >
> javax.servlet.http.HttpServlet.service(HttpServlet.java:115)
> >
> javax.servlet.http.HttpServlet.service(HttpServlet.java:92)
> >
> >
> com.caucho.server.dispatch.ServletFilterChain.doFilter(ServletFilterChain.java:99)
> >
> >
> com.caucho.server.webapp.WebAppFilterChain.doFilter(WebAppFilterChain.java:163)
> >
> >
> com.caucho.server.dispatch.Servletvocation.service(Servletvocation.java:208)
> >
> com.caucho.server.http.HttpRequest.handleRequest(HttpRequest.java:259)
> >
> com.caucho.server.port.TcpConnection.run(TcpConnection.java:363)
> >
> com.caucho.util.ThreadPool.runTasks(ThreadPool.java:490)
> > com.caucho.util.ThreadPool.run(ThreadPool.java:423)
> > java.lang.Thread.run(Thread.java:595)
> >
> > Regards,
> > Michael
> > --- Petar Tahchiev <paranoiabla@...>
> schrieb am Sa, 14.2.2009:
> >
> > > Von: Petar Tahchiev <paranoiabla@...>
> > > Betreff: Re: CACTUS and Weblogic (10)
> > > An: "Cactus Developers List"
> <cactus-dev@...>,
> > much99@...
> > > Datum: Samstag, 14. Februar 2009, 21:37
> > > Hi Frank,
> > >
> > > in order to use cactus with WebSphere you need to
> use Cargo
> > > (http://cargo.codehaus.org/).
> > >
> > > Put this in your containerset:
> > >
> > > <cargo
> containerId="weblogic10x"
> > > output="${logs.dir}/output.log"
> > > log="${logs.dir}/cargo.log"
> home="[EXACT
> > > LOCATION TO YOUR WEBLOGIC
> > > HOME DIRECTORY]">
> > >
> <configuration>
> > >
> <property
> > name="cargo.servlet.port"
> > > value="${cargo.servlet.port}"/>
> > >
> <property
> > name="cargo.logging"
> > > value="${cargo.logging}"/>
> > >
> <deployable
> > > type="${cactus.sample.archive.type}"
> > >
> file="${cactified.servlet.archive.name}"/>
> > >
> </configuration>
> > > </cargo>
> > >
> > > and also include the cargo jars in your
> classpath.
> > >
> > > Good luck.
> > >
> > > 2009/2/13 Frank Michael <much99@...>:
> > > > Hey everyone,
> > > >
> > > > I'm trying to run cactus on weblogic 10.
> I tried
> > > using the generic container as well as the
> weblogic7x
> > > container and both give me the same error:
> > > > Class
> org.apache.cactus.integration.ant.ContainerSet
> > > doesn't support the nested
> "weblogic7x"
> > > element.
> > > > Where, of course, weblogic7x is replaced
> with the
> > > "generic" element. Anyone know what
> might be the
> > > problem here?
> > > > My build target looks like this:
> > > > <target name="test">
> > > > <cactus haltonfailure="yes"
> > > showoutput="yes"
> printsummary="on"
> > > earfile="${temp}/../uep.ear"
> > > fork="yes">
> > > > <cactusproperty server="false"
> > >
> propertiesFile="../uepWAR/doc/WEB-INF/classes/log4j.properties"/>
> > > > <classpath
> refid="cactus.classpath"/>
> > > > <containerset>
> > > > <weblogic7x
> > > dir="/bea103/wlserver_10.3"
> > > tmpdir="/temp"
> port="7001"/>
> > > > </containerset>
> > > > <test
> name="uep.test.TestAll"
> > > outfile="logs/cactus.output">
> > > > <formatter type="plain"/>
> > > > </test>
> > > > </cactus>
> > > > </target>
> > > >
> > > > Tests from within eclipse or called by URL
> work just
> > > fine, it's only the ant task I can't seem
> to get
> > > working.
> > > >
> > > > Any help is appreciated,
> > > > Michael
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> ---------------------------------------------------------------------
> > > > To unsubscribe, e-mail:
> > > cactus-dev-unsubscribe@...
> > > > For additional commands, e-mail:
> > > cactus-dev-help@...
> > > >
> > > >
> > >
> > >
> > >
> > > --
> > > Regards, Petar!
> > > Karlovo, Bulgaria.
> > > - - - - - - - -
> > > | Author @ Manning Publications.
> > > | Senior Solution Architect @ Unic
> > > | BGJUG-Bulgarian Java User Group Leader.
> > > | Apache Maven Developer.
> > > | Apache Jakarta PMC member.
> > > | Jakarta Cactus Lead Developer.
> > > | Codehaus Plexus Developer
> > > | Blogger:
> http://weblogs.java.net/blog/paranoiabla/
> > > - - - - - - - -
> > > Public PGP Key at:
> > >
> >
> https://keyserver1.pgp.com/vkd/DownloadKey.event?keyid=0x19658550C3110611
> > > Key Fingerprint: A369 A7EE 61BC 93A3 CDFF 55A5
> 1965 8550
> > > C311 0611
> >
> >
> >
> >
> >
> ---------------------------------------------------------------------
> > To unsubscribe from this list, please visit:
> >
> > http://xircles.codehaus.org/manage_email
> >
> >
> >
---------------------------------------------------------------------
To unsubscribe from this list, please visit:
http://xircles.codehaus.org/manage_email
thx for the headsup, I already got it running using the weblogic8x tag as I didn't use the latest snapshot but I'll make sure to give it a shot with the snapshot, too.
Thx a bunch,
Michael
--- Adrian Cole <ferncam1@...> schrieb am Sa, 21.2.2009:
> Von: Adrian Cole <ferncam1@...>
> Betreff: Re: [cargo-user] Re: CACTUS and Weblogic (10)
> An: user@...
> Datum: Samstag, 21. Februar 2009, 1:58
> Hello.
>
> Based on the below, the user should specify weblogic103x
> and ensure they are
> using JDK 6.
>
> Note that latter versions of WebLogic are recent updates,
> so ensure the
> version of CARGO is 1.0-SNAPSHOT until we release a new
> Beta.
>
> Cheers,
> -Adrian Cole
>
>
> On Mon, Feb 16, 2009 at 10:19 AM, Frank Michael
> <much99@...> wrote:
>
> > Hey,
> >
> > sry for posting to the dev list before, moving it to
> the user list:
> >
> > Yes, I know I need cargo and I get the latest cactus
> released. All
> > classpaths are set up fine (I think) and I'm using
> your config but I get
> > this error:
> > org.codehaus.cargo.container.ContainerException:
> Cannot create
> > configuration. There's no registered configuration
> for the parameters
> > (container [id = [weblogic10x], type = [installed]],
> configuration type
> > [standalone]). Actually there are no valid types
> registered for this
> > configuration. Maybe you've made a mistake
> spelling it?
> >
> > I tried lots of different combinations, none of them
> is working, all of
> > them give the same error, which I can't find too
> much about neither in
> > google nor on this mailing list.
> > Also, unfortunatly, if I try to read up on
> Configurations on the cargo
> > website (http://cargo.codehaus.org/Configuration) I
> just get the following
> > error:
> > java.lang.Exception:
> >
> org.springframework.transaction.UnexpectedRollbackException:
> Transaction
> > rolled back because it has been marked as
> rollback-only
> >
> com.openxource.unity.providers.confluence.ConfluencePageProviderImpl.getPage(ConfluencePageProviderImpl.java:87)
> >
> >
> com.openxource.unity.beans.impl.UnityPageRendererImpl.getFragment(UnityPageRendererImpl.java:359)
> >
> >
> com.openxource.unity.beans.impl.UnityPageRendererImpl.renderPage(UnityPageRendererImpl.java:165)
> >
> >
> com.openxource.unity.servlets.ContentServlet.doGet(ContentServlet.java:101)
> >
> javax.servlet.http.HttpServlet.service(HttpServlet.java:115)
> >
> javax.servlet.http.HttpServlet.service(HttpServlet.java:92)
> >
> >
> com.caucho.server.dispatch.ServletFilterChain.doFilter(ServletFilterChain.java:99)
> >
> >
> com.caucho.server.webapp.WebAppFilterChain.doFilter(WebAppFilterChain.java:163)
> >
> >
> com.caucho.server.dispatch.Servletvocation.service(Servletvocation.java:208)
> >
> com.caucho.server.http.HttpRequest.handleRequest(HttpRequest.java:259)
> >
> com.caucho.server.port.TcpConnection.run(TcpConnection.java:363)
> >
> com.caucho.util.ThreadPool.runTasks(ThreadPool.java:490)
> > com.caucho.util.ThreadPool.run(ThreadPool.java:423)
> > java.lang.Thread.run(Thread.java:595)
> >
> > Regards,
> > Michael
> > --- Petar Tahchiev <paranoiabla@...>
> schrieb am Sa, 14.2.2009:
> >
> > > Von: Petar Tahchiev <paranoiabla@...>
> > > Betreff: Re: CACTUS and Weblogic (10)
> > > An: "Cactus Developers List"
> <cactus-dev@...>,
> > much99@...
> > > Datum: Samstag, 14. Februar 2009, 21:37
> > > Hi Frank,
> > >
> > > in order to use cactus with WebSphere you need to
> use Cargo
> > > (http://cargo.codehaus.org/).
> > >
> > > Put this in your containerset:
> > >
> > > <cargo
> containerId="weblogic10x"
> > > output="${logs.dir}/output.log"
> > > log="${logs.dir}/cargo.log"
> home="[EXACT
> > > LOCATION TO YOUR WEBLOGIC
> > > HOME DIRECTORY]">
> > >
> <configuration>
> > >
> <property
> > name="cargo.servlet.port"
> > > value="${cargo.servlet.port}"/>
> > >
> <property
> > name="cargo.logging"
> > > value="${cargo.logging}"/>
> > >
> <deployable
> > > type="${cactus.sample.archive.type}"
> > >
> file="${cactified.servlet.archive.name}"/>
> > >
> </configuration>
> > > </cargo>
> > >
> > > and also include the cargo jars in your
> classpath.
> > >
> > > Good luck.
> > >
> > > 2009/2/13 Frank Michael <much99@...>:
> > > > Hey everyone,
> > > >
> > > > I'm trying to run cactus on weblogic 10.
> I tried
> > > using the generic container as well as the
> weblogic7x
> > > container and both give me the same error:
> > > > Class
> org.apache.cactus.integration.ant.ContainerSet
> > > doesn't support the nested
> "weblogic7x"
> > > element.
> > > > Where, of course, weblogic7x is replaced
> with the
> > > "generic" element. Anyone know what
> might be the
> > > problem here?
> > > > My build target looks like this:
> > > > <target name="test">
> > > > <cactus haltonfailure="yes"
> > > showoutput="yes"
> printsummary="on"
> > > earfile="${temp}/../uep.ear"
> > > fork="yes">
> > > > <cactusproperty server="false"
> > >
> propertiesFile="../uepWAR/doc/WEB-INF/classes/log4j.properties"/>
> > > > <classpath
> refid="cactus.classpath"/>
> > > > <containerset>
> > > > <weblogic7x
> > > dir="/bea103/wlserver_10.3"
> > > tmpdir="/temp"
> port="7001"/>
> > > > </containerset>
> > > > <test
> name="uep.test.TestAll"
> > > outfile="logs/cactus.output">
> > > > <formatter type="plain"/>
> > > > </test>
> > > > </cactus>
> > > > </target>
> > > >
> > > > Tests from within eclipse or called by URL
> work just
> > > fine, it's only the ant task I can't seem
> to get
> > > working.
> > > >
> > > > Any help is appreciated,
> > > > Michael
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> ---------------------------------------------------------------------
> > > > To unsubscribe, e-mail:
> > > cactus-dev-unsubscribe@...
> > > > For additional commands, e-mail:
> > > cactus-dev-help@...
> > > >
> > > >
> > >
> > >
> > >
> > > --
> > > Regards, Petar!
> > > Karlovo, Bulgaria.
> > > - - - - - - - -
> > > | Author @ Manning Publications.
> > > | Senior Solution Architect @ Unic
> > > | BGJUG-Bulgarian Java User Group Leader.
> > > | Apache Maven Developer.
> > > | Apache Jakarta PMC member.
> > > | Jakarta Cactus Lead Developer.
> > > | Codehaus Plexus Developer
> > > | Blogger:
> http://weblogs.java.net/blog/paranoiabla/
> > > - - - - - - - -
> > > Public PGP Key at:
> > >
> >
> https://keyserver1.pgp.com/vkd/DownloadKey.event?keyid=0x19658550C3110611
> > > Key Fingerprint: A369 A7EE 61BC 93A3 CDFF 55A5
> 1965 8550
> > > C311 0611
> >
> >
> >
> >
> >
> ---------------------------------------------------------------------
> > To unsubscribe from this list, please visit:
> >
> > http://xircles.codehaus.org/manage_email
> >
> >
> >
---------------------------------------------------------------------
To unsubscribe from this list, please visit:
http://xircles.codehaus.org/manage_email
« Return to Thread: Re: CACTUS and Weblogic (10)
| Free embeddable forum powered by Nabble | Forum Help |
