Re: Re: Fwd: Re: Built ARM cortex-a8 (beagleboard) faild

> Greetings,
> ToM
>
> Zitat von René Rebe <rene@...>:
>
>>
>> It arrived on the list multiple times and I already answered it
>> (why do you think it did not arrive?), to re-paste my answer:
>>
>>> ah sorry, I have not yet fixed dietlibc (and thus embutils) for
>>> ARM EABI. Just deselect dietlibc and embutils. You'll usually
>>> not need them on the BeagleBoard.
>>>
>>> (in theory I could even upload the 2GB 1500 package T2 build
>>> that lives on my Beagle rev-B, ... if I just had a minute to
>>> polish it some more, ...)
>>>
>>> Anyway: just enable the expert option section, enable custom
>>> package selection and add the rules:
>>>
>>> O dietlibc
>>> O embutils
>>>
>>> Alternatively you could fix dietlibc for ARM EABI.
>>>
>>
>> Yours,
>>
>> 4tm@... wrote:
>>> Hallo René,
>>>
>>> ich versuche seit Do. letzter Woche diese Nachricht zu posten.
>>> Leider kommt diese nicht an!
>>> Mache ich etwas falsch?
>>>
>>> Viele Grüße,
>>> ToM
>>>
>>> -------- Original-Nachricht --------
>>> Datum: Fri, 17 Apr 2009 11:54:14 +0200
>>> Von: 4tm@...
>>> An: t2@...
>>> Betreff: Re: Built ARM cortex-a8 (beagleboard) faild
>>>
>>> Hello René,
>>>
>>> first I had the idea to run the t2-arm in a QEMU.
>>> Last week I got my beagleboard REV C2 ;-)
>>> So fist I have to learn to handle it.
>>> I play around with the angstrom-distribution *sorry* ;-)
>>>
>>> Now I want to built a T2 for beagle and run into an error:
>>>
>>>  - Target Distribution
>>> (generic)  Generic System
>>> (minimal)  Minimalistic package selection
>>> (none)     Just create binary packages and isofs.txt
>>>
>>> - Architecture, CPU and Optimization
>>> (arm)      ARM (Advanced RISC Machines)
>>> (el)       Build for little endian machines
>>> (cortex-a8) cortex-a8 CPU
>>> (gnueabi)  GNU EABI
>>> [ ]        Generate code using the 16bit thumb instruction set
>>> [*]        This is a cross-build between architectures
>>>
>>>
>>> == 14:30:00 =[1]=> Building base/dietlibc [0.31 8.0-trunk].
>>> -> Preparing configuration to build this package with dietlibc
>>> (statically).
>>> -> Reading package config: package/base/dietlibc/dietlibc.conf
>>> -> Preparing build in src.dietlibc.arm.20090416.142959.17519.t2-8-vm
>>> -> Building. Writing output to $root/var/adm/logs/1-dietlibc.out
>>> !> `bin-x86_64/diet-i' ->  
>>> `/root/t2-trunk/build/arm-8.0-trunk-generic-arm-gnue
>>> abi-cortex-a8-cross/TOOLCHAIN/tools.cross/diet-bin/diet'
>>> !> `bin-x86_64/diet-dyn-i' ->  
>>> `/root/t2-trunk/build/arm-8.0-trunk-generic-arm-
>>> gnueabi-cortex-a8-cross/TOOLCHAIN/tools.cross/diet-bin/diet-dyn'
>>> !> Running make CC=arm-t2-linux-gnueabi-gcc  
>>> CPP=arm-t2-linux-gnueabi-cpp CXX=a
>>> rm-t2-linux-gnueabi-g++ prefix=/usr/dietlibc  
>>> docdir=/usr/dietlibc/doc/dietli ..
>>> !> You should not call uname during the build!
>>> !> arm-t2-linux-gnueabi-cc -I. -isystem include -pipe -nostdinc -Os
>>>  -fomit-fra
>>> me-pointer -fstrict-aliasing -mhard-float -Wall -W  
>>> -Wchar-subscripts -Wmissi ..
>>> !> cc1: sorry, unimplemented: -mfloat-abi=hard and VFP
>>> !> Due to previous errors, no 1-dietlibc.log file!
>>> !> (Try enabling xtrace in the config to track an error inside the  
>>> build system.)
>>> -> $root/var/adm/logs/1-dietlibc.out -> 1-dietlibc.err
>>> == 04/16/09 14:30:14 =[1]=> Aborted building package dietlibc.
>>>
>>>
>>> After #./scripts/Cleanup I get some warnings!
>>>
>>> Searching for lingering temp/backup files (this may take some time) ...
>>> WARNING: Found package/./vdr/vdr-pin/pin-vdr.diff.old
>>> WARNING: Found package/./contrib/rtai/.rtai_config
>>> WARNING: Found package/./contrib/rtai/.rtai_config_comedi
>>>
>>> Pleas can you guide me how to do this?
>>>
>>>> You'll also have to add the -omap linux kernel fork for the board
>>>> support (as I had no time, yet, to do so).
>>>>
>>>
>>> Greetings,
>>> ToM
>