Re: Re: Fwd: Re: Built ARM cortex-a8 (beagleboard) faild

> ToM wrote:
>> Hello René,
>>
>> I don't know what's going on with the list!
>> I got only your post from today.
> ?
>>>> Anyway: just enable the expert option section, enable custom
>>>> package selection and add the rules:
>>>> O dietlibc
>>>> O embutils
>>
>> It brings nothing new?
> What do you mean?
>
>> Greetings,
>> ToM
>>
>> Zitat von René Rebe <rene@...>:
>>
>>>
>>> It arrived on the list multiple times and I already answered it
>>> (why do you think it did not arrive?), to re-paste my answer:
>>>
>>>> ah sorry, I have not yet fixed dietlibc (and thus embutils) for
>>>> ARM EABI. Just deselect dietlibc and embutils. You'll usually
>>>> not need them on the BeagleBoard.
>>>>
>>>> (in theory I could even upload the 2GB 1500 package T2 build
>>>> that lives on my Beagle rev-B, ... if I just had a minute to
>>>> polish it some more, ...)
>>>>
>>>> Anyway: just enable the expert option section, enable custom
>>>> package selection and add the rules:
>>>>
>>>> O dietlibc
>>>> O embutils
>>>>
>>>> Alternatively you could fix dietlibc for ARM EABI.
>>>>
>>>
>>> Yours,
>>>
>>> 4tm@... wrote:
>>>> Hallo René,
>>>>
>>>> ich versuche seit Do. letzter Woche diese Nachricht zu posten.
>>>> Leider kommt diese nicht an!
>>>> Mache ich etwas falsch?
>>>>
>>>> Viele Grüße,
>>>> ToM
>>>>
>>>> -------- Original-Nachricht --------
>>>> Datum: Fri, 17 Apr 2009 11:54:14 +0200
>>>> Von: 4tm@...
>>>> An: t2@...
>>>> Betreff: Re: Built ARM cortex-a8 (beagleboard) faild
>>>>
>>>> Hello René,
>>>>
>>>> first I had the idea to run the t2-arm in a QEMU.
>>>> Last week I got my beagleboard REV C2 ;-)
>>>> So fist I have to learn to handle it.
>>>> I play around with the angstrom-distribution *sorry* ;-)
>>>>
>>>> Now I want to built a T2 for beagle and run into an error:
>>>>
>>>> - Target Distribution
>>>> (generic)  Generic System
>>>> (minimal)  Minimalistic package selection
>>>> (none)     Just create binary packages and isofs.txt
>>>>
>>>> - Architecture, CPU and Optimization
>>>> (arm)      ARM (Advanced RISC Machines)
>>>> (el)       Build for little endian machines
>>>> (cortex-a8) cortex-a8 CPU
>>>> (gnueabi)  GNU EABI
>>>> [ ]        Generate code using the 16bit thumb instruction set
>>>> [*]        This is a cross-build between architectures
>>>>
>>>>
>>>> == 14:30:00 =[1]=> Building base/dietlibc [0.31 8.0-trunk].
>>>> -> Preparing configuration to build this package with dietlibc  
>>>> (statically).
>>>> -> Reading package config: package/base/dietlibc/dietlibc.conf
>>>> -> Preparing build in src.dietlibc.arm.20090416.142959.17519.t2-8-vm
>>>> -> Building. Writing output to $root/var/adm/logs/1-dietlibc.out
>>>> !> `bin-x86_64/diet-i' ->    
>>>> `/root/t2-trunk/build/arm-8.0-trunk-generic-arm-gnue
>>>> abi-cortex-a8-cross/TOOLCHAIN/tools.cross/diet-bin/diet'
>>>> !> `bin-x86_64/diet-dyn-i' ->    
>>>> `/root/t2-trunk/build/arm-8.0-trunk-generic-arm-
>>>> gnueabi-cortex-a8-cross/TOOLCHAIN/tools.cross/diet-bin/diet-dyn'
>>>> !> Running make CC=arm-t2-linux-gnueabi-gcc    
>>>> CPP=arm-t2-linux-gnueabi-cpp CXX=a
>>>> rm-t2-linux-gnueabi-g++ prefix=/usr/dietlibc    
>>>> docdir=/usr/dietlibc/doc/dietli ..
>>>> !> You should not call uname during the build!
>>>> !> arm-t2-linux-gnueabi-cc -I. -isystem include -pipe -nostdinc  
>>>> -Os  -fomit-fra
>>>> me-pointer -fstrict-aliasing -mhard-float -Wall -W    
>>>> -Wchar-subscripts -Wmissi ..
>>>> !> cc1: sorry, unimplemented: -mfloat-abi=hard and VFP
>>>> !> Due to previous errors, no 1-dietlibc.log file!
>>>> !> (Try enabling xtrace in the config to track an error inside  
>>>> the  build system.)
>>>> -> $root/var/adm/logs/1-dietlibc.out -> 1-dietlibc.err
>>>> == 04/16/09 14:30:14 =[1]=> Aborted building package dietlibc.
>>>>
>>>>
>>>> After #./scripts/Cleanup I get some warnings!
>>>>
>>>> Searching for lingering temp/backup files (this may take some time) ...
>>>> WARNING: Found package/./vdr/vdr-pin/pin-vdr.diff.old
>>>> WARNING: Found package/./contrib/rtai/.rtai_config
>>>> WARNING: Found package/./contrib/rtai/.rtai_config_comedi
>>>>
>>>> Pleas can you guide me how to do this?
>>>>
>>>>> You'll also have to add the -omap linux kernel fork for the board
>>>>> support (as I had no time, yet, to do so).
>>>>>
>>>>
>>>> Greetings,
>>>> ToM
>>
>
>
> --
>  René Rebe - ExactCODE GmbH - Europe, Germany, Berlin
>  http://exactcode.de | http://t2-project.org | http://rene.rebe.name