« Return to Thread: Reading USB flash during boot issues
Re: Reading USB flash during boot issues
by Brent Gardner
::
Rate this Message:
Brent Gardner wrote:
> I have several devices that run Bering-uClibc v3.0-Beta2. These devices
> boot from CD and read and save config on USB flash drive.
>
> I'm trying to upgrade to v3.1.1-Beta2 but having a bit of trouble with
> the flash drive.
>
> On my test machine and on 2 other machines the setup works as expected,
> but on the target machine, the machine does not see the flash drive
> during boot so packages and config are not loaded. But after booting, I
> can mount and access the flash drive, no problem.
>
> I'm using the same CD and flash drive on the test machines and the
> target machine. I've also tried burning a new CD and using other flash
> drives. The target machine works fine with v3.0-Beta2.
>
> I've been digging through the logs, comparing logs between the machines
> that work and the one that doesn't, I can't find any obvious issues.
> I've tried switching around the module load order in initrd.
>
>
> Can anyone give me other ideas to consider?
>
Sorry, I was looking at the wrong logs earlier.
I see lines such as these when the machine boots without reading the
flash drive properly:
usb.c: USB device not accepting new address=3 (error=-110)
usb.c: USB device not accepting new address=4 (error=-110)
I'll be researching this but if anyone has an idea I'd love to hear it.
Brent Gardner
------------------------------------------------------------------------------
Register Now & Save for Velocity, the Web Performance & Operations
Conference from O'Reilly Media. Velocity features a full day of
expert-led, hands-on workshops and two days of sessions from industry
leaders in dedicated Performance & Operations tracks. Use code vel09scf
and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf
------------------------------------------------------------------------
leaf-user mailing list: leaf-user@...
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
> I have several devices that run Bering-uClibc v3.0-Beta2. These devices
> boot from CD and read and save config on USB flash drive.
>
> I'm trying to upgrade to v3.1.1-Beta2 but having a bit of trouble with
> the flash drive.
>
> On my test machine and on 2 other machines the setup works as expected,
> but on the target machine, the machine does not see the flash drive
> during boot so packages and config are not loaded. But after booting, I
> can mount and access the flash drive, no problem.
>
> I'm using the same CD and flash drive on the test machines and the
> target machine. I've also tried burning a new CD and using other flash
> drives. The target machine works fine with v3.0-Beta2.
>
> I've been digging through the logs, comparing logs between the machines
> that work and the one that doesn't, I can't find any obvious issues.
> I've tried switching around the module load order in initrd.
>
>
> Can anyone give me other ideas to consider?
>
Sorry, I was looking at the wrong logs earlier.
I see lines such as these when the machine boots without reading the
flash drive properly:
usb.c: USB device not accepting new address=3 (error=-110)
usb.c: USB device not accepting new address=4 (error=-110)
I'll be researching this but if anyone has an idea I'd love to hear it.
Brent Gardner
------------------------------------------------------------------------------
Register Now & Save for Velocity, the Web Performance & Operations
Conference from O'Reilly Media. Velocity features a full day of
expert-led, hands-on workshops and two days of sessions from industry
leaders in dedicated Performance & Operations tracks. Use code vel09scf
and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf
------------------------------------------------------------------------
leaf-user mailing list: leaf-user@...
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
« Return to Thread: Reading USB flash during boot issues
| Free embeddable forum powered by Nabble | Forum Help |
