Re: Samba printer doesn't work

> Hello
>
> I,m using Bering Leaf from 2000. First Bering Leaf 1.0, from 2003 Bering
> Leaf 2003 and now Bering-uClibc 3.1
>
> My Info:
>
> ------- start of info -----------
> firewall# uname -a
> Linux firewall 2.4.34 #1 Tue Jan 23 20:12:21 CET 2007 i686 unknown
> firewall# ip addr show
> 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
>      link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>      inet 127.0.0.1/8 scope host lo
> 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop
>      link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
> 3: eth0: <BROADCAST,MULTICAST,NOTRAILERS,UP> mtu 1500 qdisc pfifo_fast
> qlen 1000
>      link/ether 00:0a:cd:00:91:71 brd ff:ff:ff:ff:ff:ff
>      inet 212.76.51.79/22 brd 212.76.51.255 scope global eth0
> 4: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
>      link/ether 00:0a:cd:00:99:f9 brd ff:ff:ff:ff:ff:ff
>      inet 192.168.0.1/24 brd 192.168.0.255 scope global eth1
> firewall# ip route show
> 192.168.0.0/24 dev eth1  proto kernel  scope link  src 192.168.0.1
> 212.76.48.0/22 dev eth0  proto kernel  scope link  src 212.76.51.79
> default via 212.76.51.254 dev eth0
> firewall# lsmod
> Module Size  Used by    Not tainted
> lp                      4880   1
> parport_pc             14228   1
> parport                10880   1 [lp parport_pc]
> softdog                 1392   1
> ipt_ipp2p               5908   0
> ipt_state                272  18
> ipt_helper               400   0 (unused)
> ipt_conntrack            692   0
> ipt_REDIRECT             480   0 (unused)
> ipt_MASQUERADE          1024   1
> ip_nat_irc              1704   0 (unused)
> ip_nat_ftp              2152   0 (unused)
> iptable_nat            14388   3 [ipt_REDIRECT ipt_MASQUERADE ip_nat_irc
> ip_nat_ftp]
> ip_conntrack_irc        2484   1
> ip_conntrack_ftp        3132   1
> ip_conntrack           16548   2 [ipt_state ipt_helper ipt_conntrack
> ipt_REDIRECT ipt_MASQUERADE ip_nat_irc ip_nat_ftp iptable_nat
> ip_conntrack_irc ip_conntrack_ftp]
> 8139too                11944   2
> mii                     1820   0 [8139too]
> crc32                   2620   0 [8139too]
> vfat                    8492   0 (unused)
> isofs                  15732   0
> ide-detect               132   0 (unused)
> ide-cd                 26748   0
> ide-disk               11372   0
> ide-core               88280   0 [ide-detect ide-cd ide-disk]
> cdrom                  25568   0 [ide-cd]
> firewall# /sbin/shorewall status
> Shorewall-3.4.7 Status at firewall - Tue Feb 24 20:45:10 UTC 2009
>
> Shorewall is running
> State:Started (Tue Feb 24 19:18:40 UTC 2009)
>
> firewall# iptables -t nat -nvL
> Chain PREROUTING (policy ACCEPT 1657 packets, 113K bytes)
>   pkts bytes target     prot opt in     out     source
> destination
>    193 27099 net_dnat   all  --  eth0   *       0.0.0.0/0
> 0.0.0.0/0
>
> Chain POSTROUTING (policy ACCEPT 133 packets, 9702 bytes)
>   pkts bytes target     prot opt in     out     source
> destination
>   1246 63116 eth0_masq  all  --  *      eth0    0.0.0.0/0
> 0.0.0.0/0
>
> Chain OUTPUT (policy ACCEPT 219 packets, 20625 bytes)
>   pkts bytes target     prot opt in     out     source
> destination
>
> Chain eth0_masq (1 references)
>   pkts bytes target     prot opt in     out     source
> destination
>   1114 53472 MASQUERADE  all  --  *      *       192.168.0.0/24
> 0.0.0.0/0
>
> Chain net_dnat (1 references)
>   pkts bytes target     prot opt in     out     source
> destination
>      0     0 DNAT       tcp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           tcp dpt:28111 to:192.168.0.11
>      0     0 DNAT       udp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           udp dpt:28111 to:192.168.0.11
>      0     0 DNAT       tcp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           tcp dpt:28112 to:192.168.0.12
>      0     0 DNAT       udp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           udp dpt:28112 to:192.168.0.12
>      0     0 DNAT       tcp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           tcp dpt:28113 to:192.168.0.13
>      0     0 DNAT       udp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           udp dpt:28113 to:192.168.0.13
>      0     0 DNAT       tcp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           tcp dpt:28114 to:192.168.0.14
>      0     0 DNAT       udp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           udp dpt:28114 to:192.168.0.14
>      0     0 DNAT       tcp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           tcp dpt:28115 to:192.168.0.15
>      0     0 DNAT       udp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           udp dpt:28115 to:192.168.0.15
>      0     0 DNAT       tcp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           tcp dpt:28116 to:192.168.0.16
>      0     0 DNAT       udp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           udp dpt:28116 to:192.168.0.16
>      0     0 DNAT       tcp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           tcp dpt:28117 to:192.168.0.17
>      0     0 DNAT       udp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           udp dpt:28117 to:192.168.0.17
>      0     0 DNAT       tcp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           tcp dpt:28118 to:192.168.0.18
>      0     0 DNAT       udp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           udp dpt:28118 to:192.168.0.18
>      0     0 DNAT       tcp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           tcp dpt:28119 to:192.168.0.19
>      0     0 DNAT       udp  --  *      *       0.0.0.0/0
> 0.0.0.0/0           udp dpt:28119 to:192.168.0.19
> ------- end of info -----------
>
> And my messages:
>
> ------- start of messages -----------
> Feb 24 19:18:34 firewall syslogd 1.4.1: restart.
> Feb 24 19:18:34 firewall kernel: klogd 1.4.1, log source = /proc/kmsg
> started.
> Feb 24 19:18:34 firewall kernel: BIOS-provided physical RAM map:
> Feb 24 19:18:34 firewall kernel: 64MB LOWMEM available.
> Feb 24 19:18:34 firewall kernel: Initializing CPU#0
> Feb 24 19:18:34 firewall kernel: Memory: 62544k/65536k available (864k
> kernel code, 2604k reserved, 97k data, 60k init, 0k highmem)
> Feb 24 19:18:34 firewall kernel: Dentry cache hash table entries: 8192
> (order: 4, 65536 bytes)
> Feb 24 19:18:34 firewall kernel: Inode cache hash table entries: 4096
> (order: 3, 32768 bytes)
> Feb 24 19:18:34 firewall kernel: Mount cache hash table entries: 512
> (order: 0, 4096 bytes)
> Feb 24 19:18:34 firewall kernel: Buffer cache hash table entries: 4096
> (order: 2, 16384 bytes)
> Feb 24 19:18:34 firewall kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
> Feb 24 19:18:34 firewall kernel: CPU: L2 cache: 512K
> Feb 24 19:18:34 firewall kernel: Checking 'hlt' instruction... OK.
> Feb 24 19:18:34 firewall kernel: PCI: PCI BIOS revision 2.10 entry at
> 0xfd943, last bus=1
> Feb 24 19:18:34 firewall kernel: PCI: Using configuration type 1
> Feb 24 19:18:34 firewall kernel: PCI: Probing PCI hardware
> Feb 24 19:18:34 firewall kernel: PCI: Using IRQ router PIIX/ICH
> [8086/7110] at 00:07.0
> Feb 24 19:18:34 firewall kernel: Limiting direct PCI/PCI transfers.
> Feb 24 19:18:34 firewall kernel: Linux NET4.0 for Linux 2.4
> Feb 24 19:18:34 firewall kernel: Based upon Swansea University Computer
> Society NET3.039
> Feb 24 19:18:34 firewall kernel: Serial driver version 5.05c
> (2001-07-08) with MANY_PORTS SHARE_IRQ DETECT_IRQ SERIAL_PCI enabled
> Feb 24 19:18:34 firewall kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
> Feb 24 19:18:34 firewall kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
> Feb 24 19:18:34 firewall kernel: Real Time Clock Driver v1.10f
> Feb 24 19:18:34 firewall kernel: Floppy drive(s): fd0 is 1.44M
> Feb 24 19:18:34 firewall kernel: FDC 0 is a National Semiconductor PC87306
> Feb 24 19:18:34 firewall kernel: Initializing Cryptographic API
> Feb 24 19:18:34 firewall kernel: NET4: Linux TCP/IP 1.0 for NET4.0
> Feb 24 19:18:34 firewall kernel: IP Protocols: ICMP, UDP, TCP, IGMP
> Feb 24 19:18:34 firewall kernel: IP: routing cache hash table of 512
> buckets, 4Kbytes
> Feb 24 19:18:34 firewall kernel: TCP: Hash tables configured
> (established 4096 bind 8192)
> Feb 24 19:18:34 firewall kernel: NET4: Unix domain sockets 1.0/SMP for
> Linux NET4.0.
> Feb 24 19:18:34 firewall kernel: RAMDISK: Compressed image found at block 0
> Feb 24 19:18:34 firewall kernel: Freeing initrd memory: 395k freed
> Feb 24 19:18:34 firewall kernel: Freeing unused kernel memory: 60k freed
> Feb 24 19:18:34 firewall kernel: Uniform Multi-Platform E-IDE driver
> Revision: 7.00beta4-2.4
> Feb 24 19:18:34 firewall kernel: ide: Assuming 33MHz system bus speed
> for PIO modes; override with idebus=xx
> Feb 24 19:18:34 firewall kernel: hda: ATAPI 32X CD-ROM drive, 256kB Cache
> Feb 24 19:18:34 firewall kernel: Uniform CD-ROM driver Revision: 3.12
> Feb 24 19:18:34 firewall kernel: 8139too Fast Ethernet driver 0.9.26
> Feb 24 19:18:34 firewall kernel: PCI: Found IRQ 11 for device 00:0e.0
> Feb 24 19:18:34 firewall kernel: eth0: RealTek RTL8139 at 0xc4846c00,
> 00:0a:cd:00:91:71, IRQ 11
> Feb 24 19:18:34 firewall kernel: PCI: Found IRQ 9 for device 00:10.0
> Feb 24 19:18:34 firewall kernel: PCI: Sharing IRQ 9 with 00:07.2
> Feb 24 19:18:34 firewall kernel: eth1: RealTek RTL8139 at 0xc4848800,
> 00:0a:cd:00:99:f9, IRQ 9
> Feb 24 19:18:34 firewall kernel: IPP2P v0.8.2 loading
> Feb 24 19:18:34 firewall kernel: Software Watchdog Timer: 0.05, timer
> margin: 60 sec
> Feb 24 19:18:34 firewall kernel: parport0: PC-style at 0x378 [PCSPP(,...)]
> Feb 24 19:18:34 firewall kernel: lp0: using parport0 (polling).
> Feb 24 19:18:34 firewall kernel: eth0: link up, 100Mbps, full-duplex,
> lpa 0x41E1
> Feb 24 19:18:34 firewall dhcpcd.exe: interface eth0 has been configured
> with new IP=212.76.51.79
> Feb 24 19:18:34 firewall kernel: eth1: link up, 100Mbps, full-duplex,
> lpa 0x45E1
> Feb 24 19:18:40 firewall root: Shorewall started
> ------- end of messages -----------
>
> I'm using boot CD maked with isolinux. Works. Nearly. Samba printer
> doesn't work. My windows machine doesn't see the net path to printer.
> Seems the HOW-TO is old.
>
> My isolinux.cfg:
>
> ------- start of file -----------
> display syslinux.dpy
> timeout 0
> append reboot=bios
> default linux initrd=initrd.lrp init=/linuxrc rw root=/dev/ram0
> LEAFCFG=/dev/cdrom:iso9660 PKGPATH=/dev/fd0:msdos,/dev/cdrom:iso9660
> syst_size=22M tmp_size=226M log_size=4M
> ------- end of file -----------
>
> My leaf.cfg:
>
> ------- start of file -----------
> # This file is parsed as a shell script
> # Kernel command line parameters are available as KCMD_<variable>
> # ie: KCMD_LRP contains the LRP= portion of the kernel command line
> # NOTE: For kernel command line settings that do not include an equals
> # sign (ie: rw or similar), the variable is set to itself, allowing
> # for easy testing (ie: KCMD_rw=rw).
>
> # LRP and PKGPATH variables now support whitespace (space, tab, newline)
> # as well as commas for seperators.
>
> # Uncomment for more verbose execution.
> #VERBOSE=1
>
> # Other variables you might want to set in this file include:
> # LRP Packages to load
> # PKGPATH Device(s) to load packages from
> # CONFIGDB Configuration database
> # MODDB Modules database
> # syst_size Size of root ramdisk
> # tmp_size Size of /tmp ramdisk
> # log_size Size of /var/log ramdisk
>
> # Example:
> #LRP="$KCMD_LRP rsync"
> LRP="root config etc modules iptables dhcpcd shorwall ulogd dnsmasq
> dropbear mhttpd openntpd webconf p9100 hdsupp netstatn samba sftp snort"
>
> # The first entry is the backup device.
> # If equal packages exist on multiple devices, the ones on the left most
> device have precedence.
> # PKGPATH="/dev/fd0u1680:msdos"
>
> # Experts only: the name of the config and modules databases can be
> changed, choose an unique name.
> #CONFIFGDB=configdb
> #MODDB=moddb
> #syst_size=6M
> #log_size=2M
> syst_size=22M
> tmp_size=226M
> log_size=4M
> ------- end of file -----------
>
> Samba configuration file:
>
> ------- start of file -----------
> # Global parameters
> [global]
> workgroup = DOMEK
> netbios name = spfw
> guest account = pcguest
> encrypt passwords = yes
> wins support = yes
> name resolve order = wins lmhosts hosts bcast
> log file = /var/log
>
> [homes]
> comment = All printers
> path = /tmp/storage/tmp
> create mask = 0700
> print ok = Yes
> read only = No
> browseable = No
>
> [hp5550samba]
> path = /tmp/storage/tmp/samba
> read only = No
> # quest ok = Yes
> min print space = 128
> print ok = Yes
> printer name = lp
> oplocks = No
> share modes = No
> ------- end of file -----------
>
> and finally inittab:
>
> ------- start of file -----------
> # /etc/inittab: configuration.
>
> # Boot-time system configuration/initialization script.
> ::sysinit:/etc/init.d/rcS
> ::sysinit:mkdir /tmp/storage
> ::sysinit:mkdir /tmp/storage/spool
> ::sysinit:mkdir /tmp/storage/spool/lpd
> ::sysinit:mkdir /tmp/storage/tmp
> ::sysinit:mkdir /tmp/storage/tmp/samba
> ::sysinit:chown nobody /tmp/storage/tmp/samba
> ::wait:/etc/init.d/rc 2
> ::wait:echo "lp:lp=/dev/lp0:sd=/tmp/storage/spool/lpd:mx#0:sh" >
> /etc/printcap
>
> # /sbin/getty invocations for selected ttys
> #
> # Format:
> #  <id>::<action>:<process>
> tty1::respawn:/sbin/getty 38400 tty1
> tty2::respawn:/sbin/getty 38400 tty2
>
> # Example how to put a getty on a serial line (for a terminal)
> #
> #ttyS0::respawn:/sbin/getty -L ttyS0 19200 vt100
> #ttyS1::respawn:/sbin/getty -L ttyS1 19200 vt100
>
> # Example how to put a getty on a modem line.
> #
> #ttyS3::respawn:/sbin/mgetty -x0 -s 57600 ttyS3
>
> # Stuff to do when restarting the init process
> ::restart:/sbin/init
>
> # Stuff to do before rebooting
> ::ctrlaltdel:/sbin/reboot
> ::shutdown:/etc/init.d/rc 0
> ------- end of file -----------
>
> In the HOW-TO is written, that I ought to use smb.lrp and lpd.lrp. But
> in version 3.1 i don't see them. I use samba.lrp in that place. And I
> didn't modify /var/lib/lrpkg/root.dev.mk and
> /var/lib/lrpkg/root.dev.mod. p910nd works with out that.
>
> I want to change p910nd with samba printer. Maybe I must prepare
> /var/lib/lrpkg/root.dev.mk and /var/lib/lrpkg/root.dev.mod, burn them
> and copy them to /var/lib/lrpkg in inittab after mounting CD?
> Maybe I must delete p910nd from packages list? Maybe I must do somethig
> else. But what?
>
> ------------------------------------------------------------------------------
> Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
> -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
> -Strategies to boost innovation and cut costs with open source participation
> -Receive a $600 discount off the registration fee with the source code: SFAD
> http://p.sf.net/sfu/XcvMzF8H
> ------------------------------------------------------------------------
> leaf-user mailing list: leaf-user@...
> https://lists.sourceforge.net/lists/listinfo/leaf-user
> Support Request -- http://leaf-project.org/
>
>