Re: ZD1211LnxDrv_2_22_0_0 + 2.6.26.5

> You are right, sorry about that and thanks for having been
> so kind to reply me.
> I'm not familiar with mailing lists, i will read about
> that.
> I've originally found your patch here:
> http://www.nabble.com/ZD1211LnxDrv_2_22_0_0-%2B-2.6.26.5-tt20947846.html#a20954595
>
> Now i can compile, copy the modules in /lib/modules/... ,
> but when i load the module and plug the dongle i obtain for
> dmesg:
>
> ZD1211B - version 2.22.0.0-development
> vendor_id = 0ace
> product_id = 1215
> USB 2.0 Host
> Release Ver = 4810
> zd1211:bulk out: wMaxPacketSize = 200
> zd1211:bulk in: wMaxPacketSize = 200
> zd1211:interrupt in: wMaxPacketSize = 40
> zd1211:interrupt in: int_interval = 1
> zd1211:interrupt out: wMaxPacketSize = 40
> EEPORM Ver = 4810
> zd1211:uImgLength = 1400
> zd1211:result = 1000
> zd1211:result = 400
> Finish download Firmware. Ready to reboot
> zd1211:FIRMWARE_CONFIRM = 1
> zd1211:USB Download Boot code success
> zd1211: failed reg_urb
> zd1211:USB ST Code = -22
> zd1211: failed reg_urb
> zd1211: failed reg_urb
> zd1211: failed reg_urb
> zd1211: failed reg_urb
> zd1211: failed reg_urb
> 1211_readl failed for 5 attempts...Very
> Serious<3>zd1211: failed reg_urb
>
> failed reg urb error is repeated a lot of time, in the
> middle of repetitions there is the row
>
> Invalid RF module parameter:0
>
> end in the end of dmesg
>
> usbcore: registered new interface driver zd1211b
>
> Seems like i have the same device as Nerijus Baliunas and
> get the same error.
>