Re: insteon corrupt link table(s)?

Hi Alan,
On 6/12/2012 12:51 AM, Alan Womack wrote:
> I haven't done any scenes.  But a thought would to maybe do a factory
> reset on the controller (if you are still just setting things up) and
> wipe it completely clean and then take another crack at the scenes.
At this point, neither end is indicating corruption, state unknown,
etc.  and I can turn on and off the load as desired and MH sees what is
happening. I think I can move forward.
> I don't quite have my head around them with misterhouse and it might
> be one of those areas they have some bugs yet,
Bugs are ok, I just need to know the workaround...
> So are you trying to set up one switch from misterhouse in a scene
> with your plm and that's it right now?
Nearly correct.  This is the first step. The second is to have on of the
other buttons (BCDEF) control (activate) the scene and reflect it's
state. This is where the surrogate comes into play (I think).

Lastly, I want to control the state of BCDEF led from MH and from a
different BCDEF button.
>
> Send me your MHT and I will modify it with two of my devices and see
> what happens.
I think I included it in the first post. Here is the Insteon section.

# INSTEON devices

INSTEON_KEYPADLINC, 1C.8B.49:01,        Test_light,         All_Lights
INSTEON_KEYPADLINC, 1C.8B.49:02,        Test_KP_B2,        
buttons|All_Buttons
INSTEON_KEYPADLINC, 1C.8B.49:03,        Test_KP_B3,        
buttons|All_Buttons
INSTEON_KEYPADLINC, 1C.8B.49:04,        Test_KP_B4,        
buttons|All_Buttons
INSTEON_KEYPADLINC, 1C.8B.49:05,        Test_KP_B5,        
buttons|All_Buttons
INSTEON_KEYPADLINC, 1C.8B.49:06,        Test_KP_B6,        
buttons|All_Buttons
INSTEON_KEYPADLINC, 1C.8B.49:07,        Test_KP_B7,        
buttons|All_Buttons
INSTEON_KEYPADLINC, 1C.8B.49:08,        Test_KP_B8,        
buttons|All_Buttons

INSTEON_ICONTROLLER, 10, test_scene, all_scenes

INSTEON_ICONTROLLER, F0, surrogate_scene, hidden

SCENE_MEMBER, Test_KP_B6, surrogate_scene, surrogate
SCENE_MEMBER, Test_KP_B8, surrogate_scene, surrogate


SCENE_MEMBER, Test_light, test_scene, 100%, 0.1s
SCENE_MEMBER, Test_KP_B6, test_scene,
SCENE_MEMBER, Test_KP_B8, test_scene,

SCENE_MEMBER, Test_light, Test_KP_B8, 100%, 0.1s

SCENE_MEMBER, Test_KP_B8, Test_light

Note that I have not tested this on the 'clean' setup.  I was hoping for
confirmation or correction prior to another round of tests.  Aslo, In
the OP I think I had the code commented out intentionally.
>
>
> The Ezflora seems to be treated like a light switch from the couple of
> samples I have dug up.  I need to start coding out a module, but still
> installing the sprinklers and want to get the weather module running
> so I know if it is going to rain or not.  We have had a week of rain,
> and I was getting  a kick of the number of sprinklers running IN the
> rain or in the last 2 days after the rain.
I will try to drag you into/onto 1-wire... You are aware that there are
soil moisture sensors that have been made that use 1-wire protocol? I
know where I live, projections while often accurate to the degree
stated, really don't tell us whether or not our 'spot' will get wet or
how wet it will end up if it does.  A well placed soil sensor on the
other hand...
Thanks again for your input,
Peter
>


------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
________________________________________________________
To unsubscribe from this list, go to: http://sourceforge.net/mail/?group_id=1365