Re: irsend with raw codes?

On 12-04-16 07:54 PM, Richard Ferrara wrote:
> Hi Brian,

Hi Richard,

Many thanks for the response.

> 1. Minimise IR interference (try a dark room and make sure the transmitter is as close as possible to the receiver),

When trying to use irrecord or when trying to blast the resulting raw codes?

> 2. Do some research and check what protocol that remote is using,

Yeah, I couldn't find anything.  This STB seems to be fairly "niche".  I
did find an "RMDU" file for it though.  I will attach it in case it's
useful.

> You can tell irrecord to use a specific protocol by specifying from the examples.

If you can figure out which protocol it's using.  I don't think I am
there yet.  I did try the RCMM-32.conf, RC-5.conf and RC-6.conf files.
No luck with any of them.

> 3. The pronto remotes have an awesome database and you may be able to get the pronto hex codes

From where?  Do you mean this:
http://www.remotecentral.com/cgi-bin/codes/?  If so, unfortunately I
don't even see HUAEI as a recognized brand.

> Hope this gives you some more avenues to try :)

Thanks again.

Cheers,
b.

Description=Huawei DC730
Remote.name=Slingbox with UEI RV Chip
Remote.signature=BINRV
DeviceType=Cable
DeviceIndex=1
SetupCode=2010
Protocol=01 6C
Protocol.name=XMP (Slingbox)
Protocol.variantName=JP1Slingbox
ProtocolParms=62 16 null 1 0
FixedData=17 0F 44 3E 1F 00 C0
Function.0.name=power
Function.0.hex=0F
Function.1.name=0
Function.1.hex=00
Function.2.name=1
Function.2.hex=01
Function.3.name=2
Function.3.hex=02
Function.4.name=3
Function.4.hex=03
Function.5.name=4
Function.5.hex=04
Function.6.name=5
Function.6.hex=05
Function.7.name=6
Function.7.hex=06
Function.8.name=7
Function.8.hex=07
Function.9.name=8
Function.9.hex=08
Function.10.name=9
Function.10.hex=09
Function.11.name=channel up
Function.11.hex=0D
Function.12.name=channel down
Function.12.hex=0E
Function.13.name=last (prev ch)
Function.13.hex=51
Function.14.name=exit
Function.14.hex=2A
Function.15.name=menu
Function.15.hex=20
Function.16.name=program guide
Function.16.hex=27
Function.17.name=display
Function.17.hex=26
Function.18.name=up arrow
Function.18.hex=21
Function.19.name=down arrow
Function.19.hex=22
Function.20.name=left arrow
Function.20.hex=23
Function.21.name=right arrow
Function.21.hex=24
Function.22.name=select
Function.22.hex=25
Function.23.name=play
Function.23.hex=30
Function.24.name=pause
Function.24.hex=32
Function.25.name=rewind
Function.25.hex=33
Function.26.name=fast fwd
Function.26.hex=34
Function.27.name=stop
Function.27.hex=31
Function.28.name=record
Function.28.hex=35
Function.29.name=page+
Function.29.hex=28
Function.30.name=page-
Function.30.hex=29
Function.31.name=a
Function.31.hex=60
Function.32.name=b
Function.32.hex=61
Function.33.name=c
Function.33.hex=62
Function.34.name=list
Function.34.hex=54
Function.35.name=fav
Function.35.hex=52
Function.36.name=replay
Function.36.hex=53
Function.37.name=live
Function.37.hex=55
Function.38.name=on demand
Function.38.hex=64
Button.12=0|null|null
Button.9=1|null|null
Button.a=2|null|null
Button.b=3|null|null
Button.c=4|null|null
Button.d=5|null|null
Button.e=6|null|null
Button.f=7|null|null
Button.10=8|null|null
Button.11=9|null|null
Button.4=channel up|null|null
Button.5=channel down|null|null
Button.1=power|null|null
Button.18=play|null|null
Button.1a=pause|null|null
Button.1b=rewind|null|null
Button.1c=fast fwd|null|null
Button.19=stop|null|null
Button.1d=record|null|null
Button.21=menu|null|null
Button.26=up arrow|null|null
Button.27=down arrow|null|null
Button.28=left arrow|null|null
Button.29=right arrow|null|null
Button.2a=select|null|null
Button.23=program guide|null|null
Button.2e=display|null|null
Button.15=last (prev ch)|null|null
Button.25=exit|null|null
Button.4a=on demand|null|null


------------------------------------------------------------------------------
Better than sec? Nothing is better than sec when it comes to
monitoring Big Data applications. Try Boundary one-second
resolution app monitoring today. Free.
http://p.sf.net/sfu/Boundary-dev2dev