« Return to Thread: radeon9200
Re: radeon9200
by carlos duarte
::
Rate this Message:
some things i perhaps failed to mention:
when i type startx, it crashes like this:
xauth: creating new authority file /home/blah/blah/blah
X connection to :0.0 broken (explicit kill or server shutdown)
i know this card is supported by Xorg, but despite it having been
identified by the system (as shown by dmesg), Xorg.0.log still says
"No devices to configure. Configuration failed." yes, it seems like
it tries out different drivers, but none work. i understand that this
newest release of xorg is very modular and that even the drivers are
so, but i also understand that xenocara comes with all of the
modularized drivers already included. am i comprehending this
correctly, or do i have to download and compile my "radeon" driver?
i am also not sure if i'll be able to run glx on it.. i have searched
google far and wide and have read arguments for both. ie: some people
say it will, while others say it won't. does glx depend on dri? if so,
is dri supported by openbsd? can i get glx without dri?
here's an example: a forum post that hints how i'm completely fucked,
but not really.
http://www.sudhian.com/index.php?/forums/viewthread/97688/#851028
i'm tired of having to piece toghether a solution from all of these
frustratingly half-true assumptions. mind you, i don't want fancy
superfluous xgl eyecandy, but rather glx, so i can use blender, to do
serious work.
so i'd like to hear some words of reassurance. ie: if it is possible,
and what i have to do to get it to run.
i know this list is for developers, but i figured i'd post here first
because you guys know what you're doing. if i have to take it
somewhere else, please tell me where.
much thanks in advance,
-carlos
On Dec 20, 2007 1:58 AM, carlos duarte <philipkthompson@...> wrote:
> sorry if this is off-topic.. i'd like to know if i can get my radeon
> 9200 pci to run xorg and blender on openbsd for ppc.. i had an nvidia
> card beforehand, where xorg worked quite well, but not glx, so i opted
> for a radeon instead, which was not cheap.
>
> this card is supposed to be supported by xorg, but suprisingly, it
> hasn't worked for me yet
>
> all i want to do (for now) is get X and blender running, so i can get back work
>
> all help will be tremendously appreciated.
>
> thanks,
>
> -carlos
>
>
>
>
>
>
> here's my Xorg.0.log
>
>
> X Window System Version 7.2.0
> Release Date: 22 January 2007
> X Protocol Version 11, Revision 0, Release 7.2
> Build Operating System: OpenBSD 4.2 macppc
> Current Operating System: OpenBSD foo.bar 4.2 GENERIC#1517 macppc
> Build Date: 08 August 2007
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 20 01:27:39 2007
> (II) Loader magic: 0x19b3d30
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.3
> X.Org Video Driver: 1.1
> X.Org XInput driver : 0.7
> X.Org Server Extension : 0.3
> X.Org Font Renderer : 0.5
> (II) Loader running on openbsd
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules//libpcidata.so
> (II) Module pcidata: vendor="X.Org Foundation"
> compiled for 7.2.0, module version = 1.0.0
> ABI class: X.Org Video Driver, version 1.1
> (--) Using wscons driver
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:0b:0: chip 106b,002d card 0000,0000 rev 00 class 06,00,00 hdr 00
> (II) PCI: End of PCI scan
> (II) Host-to-PCI bridge:
> (II) Bus 0: bridge is at (0:11:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> List of video drivers:
> ati
> atimisc
> nv
> r128
> radeon
> wsfb
> (II) LoadModule: "ati"
> (II) Loading /usr/X11R6/lib/modules/drivers//ati_drv.so
> (II) Module ati: vendor="X.Org Foundation"
> compiled for 7.2.0, module version = 6.6.3
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 1.1
> (II) LoadModule: "atimisc"
> (II) Loading /usr/X11R6/lib/modules/drivers//atimisc_drv.so
> (II) Module atimisc: vendor="X.Org Foundation"
> compiled for 7.2.0, module version = 6.6.3
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 1.1
> (II) LoadModule: "nv"
> (II) Loading /usr/X11R6/lib/modules/drivers//nv_drv.so
> (II) Module nv: vendor="X.Org Foundation"
> compiled for 7.2.0, module version = 2.0.2
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 1.1
> (II) LoadModule: "r128"
> (II) Loading /usr/X11R6/lib/modules/drivers//r128_drv.so
> (II) Module r128: vendor="X.Org Foundation"
> compiled for 7.2.0, module version = 4.1.0
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 1.1
> (II) LoadModule: "radeon"
> (II) Loading /usr/X11R6/lib/modules/drivers//radeon_drv.so
> (II) Module radeon: vendor="X.Org Foundation"
> compiled for 7.2.0, module version = 4.2.0
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 1.1
> (II) LoadModule: "wsfb"
> (II) Loading /usr/X11R6/lib/modules/drivers//wsfb_drv.so
> (II) Module wsfb: vendor="X.Org Foundation"
> compiled for 7.2.0, module version = 0.2.1
> ABI class: X.Org Video Driver, version 1.1
> (II) Addressable bus resource ranges are
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) OS-reported resource ranges after removing overlaps with PCI:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) All system resource ranges:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> No devices to configure. Configuration failed.
>
>
>
>
> and here's my dmesg
>
> [ using 375776 bytes of bsd ELF symbol table ]
> console out [ATY,Bugsy_A]console in [keyboard] USB found
> using parent ATY,BugsyParent:: memaddr 90000000 size 10000000, :
> consaddr 98008000, : ioaddr 800a0000, size 20000: memtag 9000, iotag
> 9000: width 1024 linebytes 1024 height 768 depth 8
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org
>
> OpenBSD 4.2 (GENERIC) #1517: Tue Aug 28 10:42:20 MDT 2007
> deraadt@...:/usr/src/sys/arch/macppc/compile/GENERIC
> real mem = 805306368 (768MB)
> avail mem = 769347584 (733MB)
> mainbus0 at root: model PowerMac3,4
> cpu0 at mainbus0: 7410 (Revision 0x1103): 533 MHz: 1MB backside cache
> memc0 at mainbus0: uni-n
> kiic0 at memc0 offset 0xf8001000
> iic0 at kiic0
> mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
> pci0 at mpcpcibr0 bus 0
> pchb0 at pci0 dev 11 function 0 "Apple Uni-N2 AGP" rev 0x00
> mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x6
> pci1 at mpcpcibr1 bus 0
> pchb1 at pci1 dev 11 function 0 "Apple Uni-N2 Host" rev 0x00
> vgafb0 at pci1 dev 18 function 0 "ATI Radeon 9200 PRO" rev 0x01, mmio
> wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
> macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03
> openpic0 at macobio0 offset 0x40000: version 0x4614 little endian
> macgpio0 at macobio0 offset 0x50
> macgpio1 at macgpio0 irq 47
> "programmer-switch" at macgpio0 not configured
> "gpio5" at macgpio0 not configured
> "gpio6" at macgpio0 not configured
> "gpio11" at macgpio0 not configured
> "extint-gpio15" at macgpio0 not configured
> "extint-gpio16" at macgpio0 not configured
> "escc-legacy" at macobio0 offset 0x12000 not configured
> zsc0 at macobio0 offset 0x13000: irq 22,50
> zstty0 at zsc0 channel 0
> zstty1 at zsc0 channel 1
> tumbler0 at macobio0 offset 0x10000: irq 30,1,2
> "timer" at macobio0 offset 0x15000 not configured
> adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets
> apm0 at adb0: battery flags 0x9, 0% charged
> kiic1 at macobio0 offset 0x18000
> iic1 at kiic1
> wdc0 at macobio0 offset 0x1f000 irq 19: DMA
> wd0 at wdc0 channel 0 drive 0: <Maxtor 6E030L0>
> wd0: 16-sector PIO, LBA, 29325MB, 60058656 sectors
> wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
> wdc1 at macobio0 offset 0x20000 irq 20: DMA
> atapiscsi0 at wdc1 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <DVDRW, IDE H16X, B02H> SCSI0 5/cdrom removable
> cd0(wdc1:0:1): using BIOS timings, DMA mode 2
> wdc2 at macobio0 offset 0x21000 irq 21: DMA
> audio0 at tumbler0
> ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
> ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0: Apple OHCI root hub, rev 1.00/1.00, addr 1
> usb1 at ohci1: USB revision 1.0
> uhub1 at usb1: Apple OHCI root hub, rev 1.00/1.00, addr 1
> mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16
> pci2 at mpcpcibr2 bus 0
> pchb2 at pci2 dev 11 function 0 "Apple Uni-N2 Host" rev 0x00
> "AT&T/Lucent FW322 1394" rev 0x00 at pci2 dev 14 function 0 not configured
> gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x01: irq 41,
> address 00:30:65:f4:13:50
> brgphy0 at gem0 phy 0: BCM5401 10/100/1000baseT PHY, rev. 3
> uhub2 at uhub0 port 1umass0 at uhub1 port 1 configuration 1 interface
> 0: Mitsumi Electric Hub in Apple Extended USB Keyboard, rev 1.10/4.10,
> addr 2
>
> umass0: Transcend T.sonic 520, rev 2.00/0.02, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets
> sd0 at scsibus1 targ 1 lun 0: <T.sonic, 520, \\001> SCSI0 0/direct removable
> sd0: 1994MB, 254 cyl, 255 head, 63 sec, 512 bytes/sec, 4084224 sec total
> uhidev0 at uhub2 port 3 configuration 1 interface 0
> uhidev0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10,
> addr 3, iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> uhidev1 at uhub2 port 3 configuration 1 interface 1
> uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10,
> addr 3, iclass 3/0
> uhidev1: 3 report ids
> uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
> uhidev2 at uhub2 port 1 configuration 1 interface 0
> uhidev2: vendor 0x2222 Macally USB Mini Optical Mouse, rev 1.10/22.65,
> addr 4, iclass 3/1
> ums0 at uhidev2: 3 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd
> root on wd0a swap on wd0b dump on wd0b
when i type startx, it crashes like this:
xauth: creating new authority file /home/blah/blah/blah
X connection to :0.0 broken (explicit kill or server shutdown)
i know this card is supported by Xorg, but despite it having been
identified by the system (as shown by dmesg), Xorg.0.log still says
"No devices to configure. Configuration failed." yes, it seems like
it tries out different drivers, but none work. i understand that this
newest release of xorg is very modular and that even the drivers are
so, but i also understand that xenocara comes with all of the
modularized drivers already included. am i comprehending this
correctly, or do i have to download and compile my "radeon" driver?
i am also not sure if i'll be able to run glx on it.. i have searched
google far and wide and have read arguments for both. ie: some people
say it will, while others say it won't. does glx depend on dri? if so,
is dri supported by openbsd? can i get glx without dri?
here's an example: a forum post that hints how i'm completely fucked,
but not really.
http://www.sudhian.com/index.php?/forums/viewthread/97688/#851028
i'm tired of having to piece toghether a solution from all of these
frustratingly half-true assumptions. mind you, i don't want fancy
superfluous xgl eyecandy, but rather glx, so i can use blender, to do
serious work.
so i'd like to hear some words of reassurance. ie: if it is possible,
and what i have to do to get it to run.
i know this list is for developers, but i figured i'd post here first
because you guys know what you're doing. if i have to take it
somewhere else, please tell me where.
much thanks in advance,
-carlos
On Dec 20, 2007 1:58 AM, carlos duarte <philipkthompson@...> wrote:
> sorry if this is off-topic.. i'd like to know if i can get my radeon
> 9200 pci to run xorg and blender on openbsd for ppc.. i had an nvidia
> card beforehand, where xorg worked quite well, but not glx, so i opted
> for a radeon instead, which was not cheap.
>
> this card is supposed to be supported by xorg, but suprisingly, it
> hasn't worked for me yet
>
> all i want to do (for now) is get X and blender running, so i can get back work
>
> all help will be tremendously appreciated.
>
> thanks,
>
> -carlos
>
>
>
>
>
>
> here's my Xorg.0.log
>
>
> X Window System Version 7.2.0
> Release Date: 22 January 2007
> X Protocol Version 11, Revision 0, Release 7.2
> Build Operating System: OpenBSD 4.2 macppc
> Current Operating System: OpenBSD foo.bar 4.2 GENERIC#1517 macppc
> Build Date: 08 August 2007
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 20 01:27:39 2007
> (II) Loader magic: 0x19b3d30
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.3
> X.Org Video Driver: 1.1
> X.Org XInput driver : 0.7
> X.Org Server Extension : 0.3
> X.Org Font Renderer : 0.5
> (II) Loader running on openbsd
> (II) LoadModule: "pcidata"
> (II) Loading /usr/X11R6/lib/modules//libpcidata.so
> (II) Module pcidata: vendor="X.Org Foundation"
> compiled for 7.2.0, module version = 1.0.0
> ABI class: X.Org Video Driver, version 1.1
> (--) Using wscons driver
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:0b:0: chip 106b,002d card 0000,0000 rev 00 class 06,00,00 hdr 00
> (II) PCI: End of PCI scan
> (II) Host-to-PCI bridge:
> (II) Bus 0: bridge is at (0:11:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
> (II) Bus 0 I/O range:
> [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) Bus 0 non-prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> (II) Bus 0 prefetchable memory range:
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> List of video drivers:
> ati
> atimisc
> nv
> r128
> radeon
> wsfb
> (II) LoadModule: "ati"
> (II) Loading /usr/X11R6/lib/modules/drivers//ati_drv.so
> (II) Module ati: vendor="X.Org Foundation"
> compiled for 7.2.0, module version = 6.6.3
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 1.1
> (II) LoadModule: "atimisc"
> (II) Loading /usr/X11R6/lib/modules/drivers//atimisc_drv.so
> (II) Module atimisc: vendor="X.Org Foundation"
> compiled for 7.2.0, module version = 6.6.3
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 1.1
> (II) LoadModule: "nv"
> (II) Loading /usr/X11R6/lib/modules/drivers//nv_drv.so
> (II) Module nv: vendor="X.Org Foundation"
> compiled for 7.2.0, module version = 2.0.2
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 1.1
> (II) LoadModule: "r128"
> (II) Loading /usr/X11R6/lib/modules/drivers//r128_drv.so
> (II) Module r128: vendor="X.Org Foundation"
> compiled for 7.2.0, module version = 4.1.0
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 1.1
> (II) LoadModule: "radeon"
> (II) Loading /usr/X11R6/lib/modules/drivers//radeon_drv.so
> (II) Module radeon: vendor="X.Org Foundation"
> compiled for 7.2.0, module version = 4.2.0
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 1.1
> (II) LoadModule: "wsfb"
> (II) Loading /usr/X11R6/lib/modules/drivers//wsfb_drv.so
> (II) Module wsfb: vendor="X.Org Foundation"
> compiled for 7.2.0, module version = 0.2.1
> ABI class: X.Org Video Driver, version 1.1
> (II) Addressable bus resource ranges are
> [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> (II) OS-reported resource ranges:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) OS-reported resource ranges after removing overlaps with PCI:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) All system resource ranges:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> No devices to configure. Configuration failed.
>
>
>
>
> and here's my dmesg
>
> [ using 375776 bytes of bsd ELF symbol table ]
> console out [ATY,Bugsy_A]console in [keyboard] USB found
> using parent ATY,BugsyParent:: memaddr 90000000 size 10000000, :
> consaddr 98008000, : ioaddr 800a0000, size 20000: memtag 9000, iotag
> 9000: width 1024 linebytes 1024 height 768 depth 8
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California. All rights reserved.
> Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org
>
> OpenBSD 4.2 (GENERIC) #1517: Tue Aug 28 10:42:20 MDT 2007
> deraadt@...:/usr/src/sys/arch/macppc/compile/GENERIC
> real mem = 805306368 (768MB)
> avail mem = 769347584 (733MB)
> mainbus0 at root: model PowerMac3,4
> cpu0 at mainbus0: 7410 (Revision 0x1103): 533 MHz: 1MB backside cache
> memc0 at mainbus0: uni-n
> kiic0 at memc0 offset 0xf8001000
> iic0 at kiic0
> mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
> pci0 at mpcpcibr0 bus 0
> pchb0 at pci0 dev 11 function 0 "Apple Uni-N2 AGP" rev 0x00
> mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x6
> pci1 at mpcpcibr1 bus 0
> pchb1 at pci1 dev 11 function 0 "Apple Uni-N2 Host" rev 0x00
> vgafb0 at pci1 dev 18 function 0 "ATI Radeon 9200 PRO" rev 0x01, mmio
> wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
> macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03
> openpic0 at macobio0 offset 0x40000: version 0x4614 little endian
> macgpio0 at macobio0 offset 0x50
> macgpio1 at macgpio0 irq 47
> "programmer-switch" at macgpio0 not configured
> "gpio5" at macgpio0 not configured
> "gpio6" at macgpio0 not configured
> "gpio11" at macgpio0 not configured
> "extint-gpio15" at macgpio0 not configured
> "extint-gpio16" at macgpio0 not configured
> "escc-legacy" at macobio0 offset 0x12000 not configured
> zsc0 at macobio0 offset 0x13000: irq 22,50
> zstty0 at zsc0 channel 0
> zstty1 at zsc0 channel 1
> tumbler0 at macobio0 offset 0x10000: irq 30,1,2
> "timer" at macobio0 offset 0x15000 not configured
> adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets
> apm0 at adb0: battery flags 0x9, 0% charged
> kiic1 at macobio0 offset 0x18000
> iic1 at kiic1
> wdc0 at macobio0 offset 0x1f000 irq 19: DMA
> wd0 at wdc0 channel 0 drive 0: <Maxtor 6E030L0>
> wd0: 16-sector PIO, LBA, 29325MB, 60058656 sectors
> wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
> wdc1 at macobio0 offset 0x20000 irq 20: DMA
> atapiscsi0 at wdc1 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <DVDRW, IDE H16X, B02H> SCSI0 5/cdrom removable
> cd0(wdc1:0:1): using BIOS timings, DMA mode 2
> wdc2 at macobio0 offset 0x21000 irq 21: DMA
> audio0 at tumbler0
> ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
> ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0: Apple OHCI root hub, rev 1.00/1.00, addr 1
> usb1 at ohci1: USB revision 1.0
> uhub1 at usb1: Apple OHCI root hub, rev 1.00/1.00, addr 1
> mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16
> pci2 at mpcpcibr2 bus 0
> pchb2 at pci2 dev 11 function 0 "Apple Uni-N2 Host" rev 0x00
> "AT&T/Lucent FW322 1394" rev 0x00 at pci2 dev 14 function 0 not configured
> gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x01: irq 41,
> address 00:30:65:f4:13:50
> brgphy0 at gem0 phy 0: BCM5401 10/100/1000baseT PHY, rev. 3
> uhub2 at uhub0 port 1umass0 at uhub1 port 1 configuration 1 interface
> 0: Mitsumi Electric Hub in Apple Extended USB Keyboard, rev 1.10/4.10,
> addr 2
>
> umass0: Transcend T.sonic 520, rev 2.00/0.02, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets
> sd0 at scsibus1 targ 1 lun 0: <T.sonic, 520, \\001> SCSI0 0/direct removable
> sd0: 1994MB, 254 cyl, 255 head, 63 sec, 512 bytes/sec, 4084224 sec total
> uhidev0 at uhub2 port 3 configuration 1 interface 0
> uhidev0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10,
> addr 3, iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> uhidev1 at uhub2 port 3 configuration 1 interface 1
> uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10,
> addr 3, iclass 3/0
> uhidev1: 3 report ids
> uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
> uhidev2 at uhub2 port 1 configuration 1 interface 0
> uhidev2: vendor 0x2222 Macally USB Mini Optical Mouse, rev 1.10/22.65,
> addr 4, iclass 3/1
> ums0 at uhidev2: 3 buttons and Z dir.
> wsmouse0 at ums0 mux 0
> bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd
> root on wd0a swap on wd0b dump on wd0b
« Return to Thread: radeon9200
| Free embeddable forum powered by Nabble | Forum Help |
