« Return to Thread: reference environment variables from gdb scripts
Re: reference environment variables from gdb scripts (gdb and unix pipe)
by Sheng-Liang Song
::
Rate this Message:
Hi,
Thanks for the info.
gdb has "shell" command to switch to a unix shell.
After switch to a unix shell, can I call gdb functions/commands?
Does gdb supports "pipe" command?
Is there a plan to add a "unix pipe" command to gdb debug prompt?
(gdb) p $2
$3 = {<std::_Vector_base<int,std::allocator<int> >> = {
_M_impl = {<std::allocator<int>> = {<__gnu_cxx::new_allocator<int>>
= {<No data fields>}, <No data fields>}, _M_start = 0x502010, _M_finish
= 0x50201c,
_M_end_of_storage = 0x50201c}}, <No data fields>}
(gdb) p$2 | my_unix_program_to_do_some_data_processing ( a pipe, "|",
would be nice to have!)
(gdb) if ($?) check the returns end
(gdb) shell
% gdb p $2 //I lost the control to the gdb environment.
(gdb) !my_sell_program_take_a_argument $2
(It would be nice if I can use "!" to execute my shell program.)
Thanks,
Sheng-Liang
Eli Zaretskii wrote:
>> Date: Fri, 24 Aug 2007 11:26:18 -0700
>> From: Sheng-Liang Song <ssl@...>
>> CC: jan.kratochvil@..., koling@...
>>
>> Eli Zaretskii wrote:
>>
>>> The GDB scripting commands are documented in the GDB user manual. See
>>> the node "Sequences".
>>>
>>>
>> I am looking for a more detail document.
>>
>
> There isn't one, because I believe everything is described in the user
> manual. If you find something that isn't there, please tell.
>
>
>> What is the different between "." and "->" operator in gdb script?
>> (Looks like no difference to me. works the same.)
>>
>> What operators does gdb 6.6 support?
>>
>
> This is not specific to scripts. GDB uses operators from the source
> language, with C/C++ operators being supported more thoroughly than
> those of other languages. See the node "C Operators" in the manual
> for C/C++, and similar nodes for other languages in language-specific
> sections under the node "Supported Languages".
>
> In general, anything that is not described in the node "Sequences" and
> its sub-nodes is not specific to scripting, but is just a feature of
> normal GDB interaction with the user.
>
>
>> Is a gdb script grammar like this one:
>> http://www.nongnu.org/hcb/
>>
>
> There's no formal description of the script grammar, since the GDB
> scripting is just a thin add-on to CLI, the command-line interpreter
> built into GDB, and CLI is for human interactions, not for programs.
> Humans don't need a formal grammar to interact with programs, only the
> format of each command.
>
>
>> $vec->_M_impl
>> STL vector does not have the member var _M_impl.
>> gdb) will report: There is no member or method named _M_impl.
>>
>> How do I check if $vec has the member _M_impl?
>>
>
> I don't think you can, but I don't consider myself a GDB scripting
> guru. Maybe someone else here will be able to help you.
>
>
>> I would like to write a script like this:
>>
>> if isMember($vec,_M_impl)
>> //do something
>> else
>> //do something else
>> end
>>
>
> One way of doing that would be to define within $vec a boolean member
> that has the value TRUE only if _M_impl is a valid member, then you
> can check for that boolean flag. Another way is to have a function
> isMember inside the $vec class (or a global function in your program)
> that would _return_ such a boolean, then you can use what you wrote
> above almost verbatim, since GDB can call functions within the
> debuggee.
>
> IOW, whatever you want to test must be already present as data in your
> program, or else GDB scripting and CLI will not be able to use it in
> the `if' clause.
>
> Admittedly, such a scripting is quite limited, which is why there're
> plans to add an extension language (Python) to GDB.
>
Thanks for the info.
gdb has "shell" command to switch to a unix shell.
After switch to a unix shell, can I call gdb functions/commands?
Does gdb supports "pipe" command?
Is there a plan to add a "unix pipe" command to gdb debug prompt?
(gdb) p $2
$3 = {<std::_Vector_base<int,std::allocator<int> >> = {
_M_impl = {<std::allocator<int>> = {<__gnu_cxx::new_allocator<int>>
= {<No data fields>}, <No data fields>}, _M_start = 0x502010, _M_finish
= 0x50201c,
_M_end_of_storage = 0x50201c}}, <No data fields>}
(gdb) p$2 | my_unix_program_to_do_some_data_processing ( a pipe, "|",
would be nice to have!)
(gdb) if ($?) check the returns end
(gdb) shell
% gdb p $2 //I lost the control to the gdb environment.
(gdb) !my_sell_program_take_a_argument $2
(It would be nice if I can use "!" to execute my shell program.)
Thanks,
Sheng-Liang
Eli Zaretskii wrote:
>> Date: Fri, 24 Aug 2007 11:26:18 -0700
>> From: Sheng-Liang Song <ssl@...>
>> CC: jan.kratochvil@..., koling@...
>>
>> Eli Zaretskii wrote:
>>
>>> The GDB scripting commands are documented in the GDB user manual. See
>>> the node "Sequences".
>>>
>>>
>> I am looking for a more detail document.
>>
>
> There isn't one, because I believe everything is described in the user
> manual. If you find something that isn't there, please tell.
>
>
>> What is the different between "." and "->" operator in gdb script?
>> (Looks like no difference to me. works the same.)
>>
>> What operators does gdb 6.6 support?
>>
>
> This is not specific to scripts. GDB uses operators from the source
> language, with C/C++ operators being supported more thoroughly than
> those of other languages. See the node "C Operators" in the manual
> for C/C++, and similar nodes for other languages in language-specific
> sections under the node "Supported Languages".
>
> In general, anything that is not described in the node "Sequences" and
> its sub-nodes is not specific to scripting, but is just a feature of
> normal GDB interaction with the user.
>
>
>> Is a gdb script grammar like this one:
>> http://www.nongnu.org/hcb/
>>
>
> There's no formal description of the script grammar, since the GDB
> scripting is just a thin add-on to CLI, the command-line interpreter
> built into GDB, and CLI is for human interactions, not for programs.
> Humans don't need a formal grammar to interact with programs, only the
> format of each command.
>
>
>> $vec->_M_impl
>> STL vector does not have the member var _M_impl.
>> gdb) will report: There is no member or method named _M_impl.
>>
>> How do I check if $vec has the member _M_impl?
>>
>
> I don't think you can, but I don't consider myself a GDB scripting
> guru. Maybe someone else here will be able to help you.
>
>
>> I would like to write a script like this:
>>
>> if isMember($vec,_M_impl)
>> //do something
>> else
>> //do something else
>> end
>>
>
> One way of doing that would be to define within $vec a boolean member
> that has the value TRUE only if _M_impl is a valid member, then you
> can check for that boolean flag. Another way is to have a function
> isMember inside the $vec class (or a global function in your program)
> that would _return_ such a boolean, then you can use what you wrote
> above almost verbatim, since GDB can call functions within the
> debuggee.
>
> IOW, whatever you want to test must be already present as data in your
> program, or else GDB scripting and CLI will not be able to use it in
> the `if' clause.
>
> Admittedly, such a scripting is quite limited, which is why there're
> plans to add an extension language (Python) to GDB.
>
« Return to Thread: reference environment variables from gdb scripts
| Free embeddable forum powered by Nabble | Forum Help |
