|
»
»
»
« Return to Thread: Blackberry -> WM sync fails
Re: synce-hal fails, synce-odccm ok on gentoo
by Vladimir Andreev-2
::
Rate this Message:
On Tue, 2008-09-02 at 09:57 +0200, Lucian Muresan wrote:
> I found dhclient on gentoo, it's called "net-misc/dhcp-3.1.1" and
> synce-hal really works with it. What I find a bit strange, that it did
> not if I removed the dynamic configuration from the hal addon script and
> let it use the fixed addresses..
> As a side note, dhcpcd-4* which is "out" by now, has evolved also into
> support dhclient-alike syntax, and is much more lightweight (as the
> author says in the History at http://roy.marples.name/dhcpcd so it might
> be worth trying to make synce-hal work with both. Otherwise it would be
> really enforcing a specific dependency... So if you don't mind the idea,
> I'm ready to try and help in any way I can (also with my limited spare
> time, as everyone) with trying and such, I'm also a c/c++ programmer,
> only don't have python and dhcp knowledge...
> Anyway, I'd also like to assist Iain with gentoo packaging, as he seems
> to be very busy, but showed up on IRC yesterday...
There is a problem then i try use net-misc/dhcp-3.1.1 in Gentoo to obtain ip
address :
# dhcpcd eth1
err, eth1: cannot request a link local address
err, eth1: cannot request a link local address
err, eth1: cannot request a link local address
...
The 169.254.0.0/16 set as local sublet in /etc/networks:
# /etc/networks
#
# This file describes a number of netname-to-adress
# mappings for the TCP/IP subsytem. It is mostly
# used at boot time, when no name servers are running.
#
loopback 127.0.0.0
link-local 169.254.0
So i think, the best way to use dhcp in synce-hal is add
DEPEND="net-misc/dhcp" in ebuild.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
SynCE-Devel mailing list
SynCE-Devel@...
https://lists.sourceforge.net/lists/listinfo/synce-devel
> I found dhclient on gentoo, it's called "net-misc/dhcp-3.1.1" and
> synce-hal really works with it. What I find a bit strange, that it did
> not if I removed the dynamic configuration from the hal addon script and
> let it use the fixed addresses..
> As a side note, dhcpcd-4* which is "out" by now, has evolved also into
> support dhclient-alike syntax, and is much more lightweight (as the
> author says in the History at http://roy.marples.name/dhcpcd so it might
> be worth trying to make synce-hal work with both. Otherwise it would be
> really enforcing a specific dependency... So if you don't mind the idea,
> I'm ready to try and help in any way I can (also with my limited spare
> time, as everyone) with trying and such, I'm also a c/c++ programmer,
> only don't have python and dhcp knowledge...
> Anyway, I'd also like to assist Iain with gentoo packaging, as he seems
> to be very busy, but showed up on IRC yesterday...
There is a problem then i try use net-misc/dhcp-3.1.1 in Gentoo to obtain ip
address :
# dhcpcd eth1
err, eth1: cannot request a link local address
err, eth1: cannot request a link local address
err, eth1: cannot request a link local address
...
The 169.254.0.0/16 set as local sublet in /etc/networks:
# /etc/networks
#
# This file describes a number of netname-to-adress
# mappings for the TCP/IP subsytem. It is mostly
# used at boot time, when no name servers are running.
#
loopback 127.0.0.0
link-local 169.254.0
So i think, the best way to use dhcp in synce-hal is add
DEPEND="net-misc/dhcp" in ebuild.
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
SynCE-Devel mailing list
SynCE-Devel@...
https://lists.sourceforge.net/lists/listinfo/synce-devel
« Return to Thread: Blackberry -> WM sync fails
| Free embeddable forum powered by Nabble | Forum Help |
