Let's start with the basics:
What does lsusb show you?
What kind of LCD/VFD are you using?
Which linux(guessing ubuntu?).
Under Ubuntu 8.10 imon:0036 device I only needed to install
lirc-modules-source, put an updated driver in
/usr/src/lirc-0.8.3/drivers/lirc_imon, but for that we first need to
know the environment.
Regards,
Jos
Steve V schreef op 8-5-2009 12:35:
> I have tried to install using the instructions at
>
http://codeka.com/forums/viewtopic.php?f=3&t=22>
http://codeka.com/forums/viewtopic.php?f=3&t=22
>
> When I sudo modprobe lirc_imon
>
> I get an error
>
> FATAL: Error inserting lirc_imon
> (/lib/modules/2.6.27-11-generic/misc/lirc_imon.ko): Unknown symbol in
> module, or unknown parameter (see dmesg)
>
> dmesg shows
>
> [ 707.408357] lirc_imon: disagrees about version of symbol struct_module
> [ 933.962515] lirc_imon: disagrees about version of symbol struct_module
> [ 1507.169368] lirc_imon: Unknown symbol lirc_unregister_driver
> [ 1507.169773] lirc_imon: Unknown symbol lirc_register_driver
>
> I would appreciate any help to get past this point.
>
> Steve
>
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled.
http://p.sf.net/sfu/kodak-com
