Samsung SGH-D600: Request not successfull: 83

Hi List, hi devs!

I just followed the http://www.opensync.org/wiki/syncml-guide SyncML Guide and
I am trying to sync the phone via the syncml-obex-client plugin.

When trying to sync, I get the following:

markus@swordfish ~/opensync/log $ msynctool --sync syncmlfile
Synchronizing group "syncmlfile"
The previous synchronization was unclean. Slow-syncing
Member 1 of type file-sync just connected
Member 2 of type syncml-obex-client had an error while connecting: Request not
successfull: 83
Member 1 of type file-sync just disconnected
All clients have disconnected
The sync failed: Unable to connect one of the members
Error synchronizing: Unable to connect one of the members

This is my client configuration:

<config>
        <bluetooth_address>00:15:B9:13:26:36</bluetooth_address>
        <bluetooth_channel>6</bluetooth_channel>
        <interface>0</interface>
        <identifier></identifier>
        <version>1</version>
        <wbxml>1</wbxml>
        <username></username>
        <password></password>
        <type>2</type>
        <usestringtable>0</usestringtable>
        <onlyreplace>0</onlyreplace>
        <recvLimit>10000</recvLimit>
        <maxObjSize></maxObjSize>
        <contact_db>addressbook</contact_db>
        <calendar_db>calendar</calendar_db>
        <note_db>tasks</note_db>
</config>

In earlier posts I read, that I have to set the channel to the "obex syncml
channel" - due to this 'sdptool browse', am I using the right channel??

Thanks for hints on this error!

Markus

PS: Playing around with version only brings unknown format with 2; wbxml
changing; maxObjSize doesnt make a difference either...

=========[ sdptool browse]=========================
markus@swordfish ~/opensync/log $ sdptool browse
Inquiring ...
Browsing 00:15:B9:13:26:36 ...
Service Name: WBTEXT
Service RecHandle: 0x10000
Service Class ID List:
  "Error: This is UUID-128" (0xdb1d8f12-95f3-402c-9b97-bc504c9a55c4)
Protocol Descriptor List:
  "L2CAP" (0x0100)
  "RFCOMM" (0x0003)
    Channel: 1
Language Base Attr List:
  code_ISO639: 0x656e
  encoding:    0x6a
  base_offset: 0x100
Profile Descriptor List:
  "Error: This is UUID-128" (0x1cdb1d8f-1295-f340-2c9b-97bc504c9a55)
    Version: 0x0100

Service Name: Serial Port
Service RecHandle: 0x10001
Service Class ID List:
  "Serial Port" (0x1101)
Protocol Descriptor List:
  "L2CAP" (0x0100)
  "RFCOMM" (0x0003)
    Channel: 2
Profile Descriptor List:
  "Serial Port" (0x1101)
    Version: 0x0100

Service Name: Dial-up Networking
Service RecHandle: 0x10002
Service Class ID List:
  "Dialup Networking" (0x1103)
Protocol Descriptor List:
  "L2CAP" (0x0100)
  "RFCOMM" (0x0003)
    Channel: 3
Profile Descriptor List:
  "Dialup Networking" (0x1103)
    Version: 0x0100

Service Name: Voice GW
Service RecHandle: 0x10003
Service Class ID List:
  "Headset Audio Gateway" (0x1112)
  "Generic Audio" (0x1203)
Protocol Descriptor List:
  "L2CAP" (0x0100)
  "RFCOMM" (0x0003)
    Channel: 4
Profile Descriptor List:
  "Headset" (0x1108)
    Version: 0x0100

Service Name: Voice GW
Service RecHandle: 0x10004
Service Class ID List:
  "Handfree Audio Gateway" (0x111f)
  "Generic Audio" (0x1203)
Protocol Descriptor List:
  "L2CAP" (0x0100)
  "RFCOMM" (0x0003)
    Channel: 5
Profile Descriptor List:
  "Handsfree" (0x111e)
    Version: 0x0101

Service Name: Advanced audio source
Service RecHandle: 0x10005
Service Class ID List:
  "Audio Source" (0x110a)
Protocol Descriptor List:
  "L2CAP" (0x0100)
    PSM: 25
  "AVDTP" (0x0019)
    uint16: 0x100
Profile Descriptor List:
  "Advanced Audio" (0x110d)
    Version: 0x0100

Service RecHandle: 0x10006
Service Class ID List:
  "AV Remote Target" (0x110c)
Protocol Descriptor List:
  "L2CAP" (0x0100)
    PSM: 23
  "AVCTP" (0x0017)
    uint16: 0x100
Profile Descriptor List:
  "AV Remote" (0x110e)
    Version: 0x0100

Service Name: OBEX File Transfer
Service RecHandle: 0x10007
Service Class ID List:
  "OBEX File Transfer" (0x1106)
Protocol Descriptor List:
  "L2CAP" (0x0100)
  "RFCOMM" (0x0003)
    Channel: 6
  "OBEX" (0x0008)
Profile Descriptor List:
  "OBEX File Transfer" (0x1106)
    Version: 0x0100

Service Name: Object Push
Service RecHandle: 0x10008
Service Class ID List:
  "OBEX Object Push" (0x1105)
Protocol Descriptor List:
  "L2CAP" (0x0100)
  "RFCOMM" (0x0003)
    Channel: 7
  "OBEX" (0x0008)
Profile Descriptor List:
  "OBEX Object Push" (0x1105)
    Version: 0x0100



_______________________________________________
Opensync-users mailing list
Opensync-users@...
https://lists.sourceforge.net/lists/listinfo/opensync-users