WARNING: This server is unstable and will be retired in the next days. If you want to keep this forum available, please request immediately a migration on the Nabble Support forum. Forums that don't receive any migration request will be deleted forever.
| 
Kannel
 » 
Kannel - User

 « Return to Thread: Sony Ericsson w910i as smsc modem

Sony Ericsson w910i as smsc modem

by russelldb :: Rate this Message:

| View in Thread

Hi,
I am a new user of kannel. I'm trying to set up kannel gateway 1.4.1 on

OS: mac os x 10.4.11
libxml2 version = 2.6.30
intel dual core

At the moment I am trying to set up my Sony Ericsson w910i as the  
smsc modem. I've followed the instructions that I have found here  
(http://swik.net/User:marc/Chipmunk+Ninja+Technical+Articles/Setting 
+up,+Configuring,+and+Using+Kannel+to+send%2Freceive+SMS+messages/
3e0s) and here http://www.mail-archive.com/devel@.../ 
msg07162.html

What I have done is copied the modem settings  for the w810i and  
tried to use them. I have attached my config files. I think the  
pertinent bits are

group = modems
id = sonyericsson_w910i
name = "Sony Ericsson Mobile Communications AB"
init-string = "AT+CNMI=2,3,2,0,0;+CMGF=0"
keepalive-cmd = "AT+CBC;+CSQ;+CMGF=0"
detect-string = "Sony Ericsson W910"

and

group = smsc
#smsc = fake
smsc = at
#smsc-id = FAKE
modemtype = sonyericsson_w910i
device = /dev/tty.RussellW910i-SerialPort1-1
my-number = **********
#port = 10000
connect-allow-ip = 127.0.0.1
log-level = 0

I got the detect string from running ATI in zTerm when connected to  
my phone via bluetooth.

When I try to start up the bearerbox like this  sudo sbin/bearerbox -
v 0 smskannel.conf I get the following output

System Darwin, release 8.11.1, version Darwin Kernel Version 8.11.1:  
Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386,  
machine i386.
Hostname macbook.gateway.2wire.net, IP 192.168.1.66.
Libxml version 2.6.30.
Using OpenSSL 0.9.7i 14 Oct 2005.
Using native malloc.

2008-09-29 21:18:12 [22477] [0] INFO: HTTP: Opening server at port  
13000.
2008-09-29 21:18:12 [22477] [0] DEBUG: Started thread 1 (gwlib/
fdset.c:poller)
2008-09-29 21:18:12 [22477] [0] DEBUG: Started thread 2 (gwlib/
http.c:server_thread)
2008-09-29 21:18:12 [22477] [0] DEBUG: Started thread 3 (gw/
bb_http.c:httpadmin_run)
2008-09-29 21:18:12 [22477] [0] DEBUG: starting smsbox connection module
2008-09-29 21:18:12 [22477] [0] INFO: BOXC: 'smsbox-max-pending' not  
set, using default (100).
2008-09-29 21:18:12 [22477] [0] DEBUG: Started thread 4 (gw/
bb_boxc.c:sms_to_smsboxes)
2008-09-29 21:18:12 [22477] [0] DEBUG: Started thread 5 (gw/
bb_boxc.c:smsboxc_run)
2008-09-29 21:18:12 [22477] [0] INFO: Set SMS resend frequency to 60  
seconds.
2008-09-29 21:18:12 [22477] [0] INFO: SMS resend retry set to unlimited.
2008-09-29 21:18:12 [22477] [0] INFO: DLR rerouting for smsc id <
(null)> disabled.
2008-09-29 21:18:12 [22477] [0] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: configuration shows modemtype <sonyericsson_w910i>
2008-09-29 21:18:12 [22477] [0] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: Reading modem definitions from <smskannel.conf>
2008-09-29 21:18:12 [22477] [1] DEBUG: Thread 1 (gwlib/
fdset.c:poller) maps to pid 22477.
2008-09-29 21:18:12 [22477] [2] DEBUG: Thread 2 (gwlib/
http.c:server_thread) maps to pid 22477.
2008-09-29 21:18:12 [22477] [0] DEBUG: Loading include file `/opt/
local/kannel/modems.conf' (on line 122 of file smskannel.conf).
2008-09-29 21:18:12 [22477] [4] DEBUG: Thread 4 (gw/
bb_boxc.c:sms_to_smsboxes) maps to pid 22477.
2008-09-29 21:18:12 [22477] [5] DEBUG: Thread 5 (gw/
bb_boxc.c:smsboxc_run) maps to pid 22477.
2008-09-29 21:18:12 [22477] [3] DEBUG: Thread 3 (gw/
bb_http.c:httpadmin_run) maps to pid 22477.
2008-09-29 21:18:12 [22477] [0] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: Found <14> modems in config
2008-09-29 21:18:12 [22477] [0] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: read modem definition for <Sony Ericsson Mobile  
Communications AB>
2008-09-29 21:18:12 [22477] [0] DEBUG: Started thread 6 (gw/smsc/
smsc_at.c:at2_device_thread)
2008-09-29 21:18:12 [22477] [0] DEBUG: Started thread 7 (gw/
bb_smscconn.c:sms_router)
2008-09-29 21:18:12 [22477] [0] INFO:  
----------------------------------------
2008-09-29 21:18:12 [22477] [0] INFO: Kannel bearerbox II version  
1.4.1 starting
2008-09-29 21:18:12 [22477] [0] INFO: MAIN: Start-up done, entering  
mainloop
2008-09-29 21:18:12 [22477] [0] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: start called
2008-09-29 21:18:12 [22477] [6] DEBUG: Thread 6 (gw/smsc/
smsc_at.c:at2_device_thread) maps to pid 22477.
2008-09-29 21:18:12 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: trying to use speed <9600> from modem definition
2008-09-29 21:18:12 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: opening device
2008-09-29 21:18:12 [22477] [7] DEBUG: Thread 7 (gw/
bb_smscconn.c:sms_router) maps to pid 22477.
2008-09-29 21:18:12 [22477] [7] DEBUG: sms_router: time to sleep  
30.00 secs.
2008-09-29 21:18:12 [22477] [7] DEBUG: sms_router: gwlist_len = 0
2008-09-29 21:18:12 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: device opened
2008-09-29 21:18:12 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: device opened
2008-09-29 21:18:12 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: speed set to 9600
2008-09-29 21:18:12 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> ^M
2008-09-29 21:18:14 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT^M
2008-09-29 21:18:14 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- AT
2008-09-29 21:18:14 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:14 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: closing device
2008-09-29 21:18:14 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: speed is 9600
2008-09-29 21:18:14 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: opening device
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: device opened
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: device opened
2008-09-29 21:18:16 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: init device
2008-09-29 21:18:16 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: speed set to 9600
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> ATZ^M
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- ATZ
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT^M
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- AT
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT&F^M
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- AT&F
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> ATE0^M
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- ATE0
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT+IFC=2,2^M
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT+CPIN?^M
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- +CPIN: READY
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:16 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT+CMGF=0^M
2008-09-29 21:18:17 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:17 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT+CSMS=?^M
2008-09-29 21:18:17 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- +CSMS: (0)
2008-09-29 21:18:17 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:17 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT+CNMI=2,3,2,0,0;+CMGF=0^M
2008-09-29 21:18:17 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- ERROR
2008-09-29 21:18:17 [22477] [6] ERROR: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: Generic error: ERROR
2008-09-29 21:18:17 [22477] [6] ERROR: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: Opening failed. Terminating
2008-09-29 21:18:17 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: closing device
2008-09-29 21:18:17 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: opening device
2008-09-29 21:18:19 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: device opened
2008-09-29 21:18:19 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: device opened
2008-09-29 21:18:19 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: init device
2008-09-29 21:18:19 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: speed set to 9600
2008-09-29 21:18:19 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> ATZ^M
2008-09-29 21:18:19 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- ATZ
2008-09-29 21:18:19 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:19 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT^M
2008-09-29 21:18:19 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- AT
2008-09-29 21:18:19 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:19 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT&F^M
2008-09-29 21:18:19 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- AT&F
2008-09-29 21:18:19 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:19 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> ATE0^M
2008-09-29 21:18:19 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- ATE0
2008-09-29 21:18:19 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:19 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT+IFC=2,2^M
2008-09-29 21:18:20 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:20 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT+CPIN?^M
2008-09-29 21:18:20 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- +CPIN: READY
2008-09-29 21:18:20 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:20 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT+CMGF=0^M
2008-09-29 21:18:20 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:20 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT+CSMS=?^M
2008-09-29 21:18:20 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- +CSMS: (0)
2008-09-29 21:18:20 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:20 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT+CNMI=2,3,2,0,0;+CMGF=0^M
2008-09-29 21:18:20 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- ERROR
2008-09-29 21:18:20 [22477] [6] ERROR: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: Generic error: ERROR
2008-09-29 21:18:20 [22477] [6] ERROR: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: Opening failed. Terminating
2008-09-29 21:18:20 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: closing device
2008-09-29 21:18:21 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: opening device
2008-09-29 21:18:22 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: device opened
2008-09-29 21:18:22 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: device opened
2008-09-29 21:18:22 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: init device
2008-09-29 21:18:22 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: speed set to 9600
2008-09-29 21:18:22 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> ATZ^M
2008-09-29 21:18:22 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- ATZ
2008-09-29 21:18:22 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:22 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT^M
2008-09-29 21:18:22 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- AT
^C2008-09-29 21:18:22 [22477] [0] WARNING: Killing signal or HTTP  
admin command received, shutting down...
2008-09-29 21:18:22 [22477] [0] DEBUG: Shutting down Kannel...
2008-09-29 21:18:22 [22477] [0] DEBUG: shutting down smsc
2008-09-29 21:18:22 [22477] [0] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: Shutting down SMSCConn, slow
2008-09-29 21:18:22 [22477] [0] DEBUG: shutting down udp
2008-09-29 21:18:22 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:22 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT&F^M
2008-09-29 21:18:22 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- AT&F
2008-09-29 21:18:22 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:22 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> ATE0^M
2008-09-29 21:18:23 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- ATE0
2008-09-29 21:18:23 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:23 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT+IFC=2,2^M
2008-09-29 21:18:23 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:23 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT+CPIN?^M
2008-09-29 21:18:23 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- +CPIN: READY
2008-09-29 21:18:23 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:23 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT+CMGF=0^M
2008-09-29 21:18:23 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:23 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT+CSMS=?^M
2008-09-29 21:18:23 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- +CSMS: (0)
2008-09-29 21:18:23 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- OK
2008-09-29 21:18:23 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: --> AT+CNMI=2,3,2,0,0;+CMGF=0^M
2008-09-29 21:18:23 [22477] [6] DEBUG: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: <-- ERROR
2008-09-29 21:18:23 [22477] [6] ERROR: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: Generic error: ERROR
2008-09-29 21:18:23 [22477] [6] ERROR: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: Opening failed. Terminating
2008-09-29 21:18:23 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: closing device
2008-09-29 21:18:24 [22477] [6] INFO: AT2[/dev/tty.RussellW910i-
SerialPort1-1]: closing device
2008-09-29 21:18:24 [22477] [6] DEBUG: Thread 6 (gw/smsc/
smsc_at.c:at2_device_thread) terminates.
2008-09-29 21:18:24 [22477] [7] DEBUG: Thread 7 (gw/
bb_smscconn.c:sms_router) terminates.
2008-09-29 21:18:24 [22477] [4] DEBUG: Thread 4 (gw/
bb_boxc.c:sms_to_smsboxes) terminates.
2008-09-29 21:18:24 [22477] [5] DEBUG: Thread 5 (gw/
bb_boxc.c:smsboxc_run) terminates.
2008-09-29 21:18:24 [22477] [0] INFO: All flow threads have died,  
killing core
2008-09-29 21:18:24 [22477] [0] DEBUG: Waiting for 2 (gwlib/
http.c:server_thread) to terminate
2008-09-29 21:18:24 [22477] [3] DEBUG: HTTP: No clients with  
requests, quitting.
2008-09-29 21:18:24 [22477] [3] DEBUG: Thread 3 (gw/
bb_http.c:httpadmin_run) terminates.
2008-09-29 21:18:24 [22477] [2] DEBUG: Thread 2 (gwlib/
http.c:server_thread) terminates.
2008-09-29 21:18:24 [22477] [1] DEBUG: Thread 1 (gwlib/
fdset.c:poller) terminates.
2008-09-29 21:18:24 [22477] [0] INFO: Total WDP messages: received 0,  
sent 0
2008-09-29 21:18:24 [22477] [0] INFO: Total SMS messages: received 0,  
sent 0
2008-09-29 21:18:24 [22477] [0] DEBUG: Immutable octet strings: 239.



And then I hit CTRL-C as the time I ran it before i left it doing  
this for 10 minutes and there seems to be a loop of the retry trying  
to connect to the phone.

So my questions: What does AT+CNMI=2,3,2,0,0 mean? If I run that in  
zTerm against the modem I get ERROR.
If I run AT+CNMI=? I get +CNMI: (2),(0,1,3),(0,2),(0,1),(0) what does  
that mean?


Has anyone ever got kannel configured with the w910i? If not can you  
recommend a phone to use for an smsc modem? I don't mind spending a  
couple of quid getting this working.

Also: for the param my-number what do I use? The telephone number of  
my mobile phone? Do I include the country code (EG +44777344747)?

I have done quiet a few google searches but as soon as I google w910i  
I just get loads of shopping and review sites.

Many thanks in advance

Russell







modems.conf (2K) Download Attachment
smskannel.conf (3K) Download Attachment

 « Return to Thread: Sony Ericsson w910i as smsc modem

Free embeddable forum powered by Nabble Forum Help