SoundBlaster fails to configure in -current

[Ed Ahlsen-Girard-2]

A SoundBlaster Live fails to configure.  I have read man (4) emu and
man (4) pci are admirable, but terse.

--

Edward Ahlsen-Girard
Ft Walton Beach, FL
OpenBSD 4.6-current (GENERIC) #353: Mon Nov  2 10:58:43 MST 2009
    deraadt@...:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz ("GenuineIntel" 686-class) 2.66 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
real mem  = 1072746496 (1023MB)
avail mem = 1030955008 (983MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/12/02, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.3 @ 0xf0450 (56 entries)
bios0: vendor Dell Computer Corporation version "A03" date 11/12/2002
bios0: Dell Computer Corporation Dimension 4550
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT APIC BOOT ASF!
acpi0: wakeup devices VBTN(S4) PCI0(S3) USB0(S3) USB1(S3) USB2(S3) PCI1(S5) KBD_(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 132MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0
acpibtn0 at acpi0: VBTN
bios0: ROM list: 0xc0000/0xf800 0xcf800/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x01
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe8000000, size 0x8000000
ppb0 at pci0 dev 1 function 0 "Intel 82845G AGP" rev 0x01
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "NVIDIA GeForce4 MX 420" rev 0xa3
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: apic 1 int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: apic 1 int 19 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: apic 1 int 18 (irq 9)
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: apic 1 int 23 (irq 3)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x81
pci2 at ppb1 bus 2
vendor "Broadcom", unknown product 0x4212 (class communications subclass modem, rev 0x02) at pci2 dev 1 function 0 not configured
"Creative Labs SoundBlaster Live (Dell)" rev 0x00 at pci2 dev 2 function 0 not configured
"Creative Labs PCI Gameport Joystick" rev 0x00 at pci2 dev 2 function 1 not configured
fxp0 at pci2 dev 8 function 0 "Intel PRO/100 VE" rev 0x81, i82562: apic 1 int 20 (irq 11), address 00:07:e9:c3:c0:ba
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD800JB-00JJC0>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd1 at pciide0 channel 0 drive 1: <WDC WD800JB-00JJC0>
wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD+RW ND-1100A, 10GE> ATAPI 5/cdrom removable
wd2 at pciide0 channel 1 drive 1: <WDC WD600BB-75CAA0>
wd2: 16-sector PIO, LBA, 57220MB, 117187500 sectors
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
wd2(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: apic 1 int 17 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5
spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on wd1a swap on wd1b dump on wd1b

[j4nKy]

On Fri, Nov 06, 2009 at 06:12:45PM -0600, Ed Ahlsen-Girard wrote:
> A SoundBlaster Live fails to configure.  I have read man (4) emu and
> man (4) pci are admirable, but terse.

> "Creative Labs SoundBlaster Live (Dell)" rev 0x00 at pci2 dev 2 function 0 not configured

RCS file: /cvs/src/sys/dev/pci/emuxki.c,v
Working file: emuxki.c
----------------------------
revision 1.26
date: 2008/03/10 21:25:53;  author: jakemsr;  state: Exp;  lines: +1 -2

the Dell SoundBlaster Live! 5.1 cards differ enough from "regular"
SB Live!/5.1/Audigy/2/4 cards that both OSS and ALSA provide
separate modules from their emu10k1 drivers to support them.

and in PR 5143, we see that emu(4) does not support these Dell
SBLive! cards, so don't attach emu(4) to them.

ok ratchov, brad

--
jakemsr@...
SDF Public Access UNIX System - http://sdf.lonestar.org

[Ed Ahlsen-Girard-2]

On Sat, 7 Nov 2009 08:04:01, Jacob Meuser wrote:

> User-Agent: Mutt/1.4.2.3i
>
> On Fri, Nov 06, 2009 at 06:12:45PM -0600, Ed Ahlsen-Girard wrote:
> > A SoundBlaster Live fails to configure.  I have read man (4) emu and
> > man (4) pci are admirable, but terse.
>
> > "Creative Labs SoundBlaster Live (Dell)" rev 0x00 at pci2 dev 2
> > function 0 not configured
>
> RCS file: /cvs/src/sys/dev/pci/emuxki.c,v
> Working file: emuxki.c
> ----------------------------
> revision 1.26
> date: 2008/03/10 21:25:53;  author: jakemsr;  state: Exp;  lines: +1
> -2
>
> the Dell SoundBlaster Live! 5.1 cards differ enough from "regular"
> SB Live!/5.1/Audigy/2/4 cards that both OSS and ALSA provide
> separate modules from their emu10k1 drivers to support them.
>
> and in PR 5143, we see that emu(4) does not support these Dell
> SBLive! cards, so don't attach emu(4) to them.
>
> ok ratchov, brad

This looks to be a patch from 2008 that is not in -current (and
the emuxki.c in the source tree I checked out the
other day is a different version). Where would the right one
live?

--
Ed Ahlsen-Girard

[Mats O Jansson]

On Sat, 7 Nov 2009, Ed Ahlsen-Girard wrote:

> On Sat, 7 Nov 2009 08:04:01, Jacob Meuser wrote:
>> User-Agent: Mutt/1.4.2.3i
>>
>> On Fri, Nov 06, 2009 at 06:12:45PM -0600, Ed Ahlsen-Girard wrote:
>>> A SoundBlaster Live fails to configure.  I have read man (4) emu and
>>> man (4) pci are admirable, but terse.
>>
>>> "Creative Labs SoundBlaster Live (Dell)" rev 0x00 at pci2 dev 2
>>> function 0 not configured
>>
>> RCS file: /cvs/src/sys/dev/pci/emuxki.c,v
>> Working file: emuxki.c
>> ----------------------------
>> revision 1.26
>> date: 2008/03/10 21:25:53;  author: jakemsr;  state: Exp;  lines: +1
>> -2
>>
>> the Dell SoundBlaster Live! 5.1 cards differ enough from "regular"
>> SB Live!/5.1/Audigy/2/4 cards that both OSS and ALSA provide
>> separate modules from their emu10k1 drivers to support them.
>>
>> and in PR 5143, we see that emu(4) does not support these Dell
>> SBLive! cards, so don't attach emu(4) to them.
>>
>> ok ratchov, brad
>
> This looks to be a patch from 2008 that is not in -current (and
> the emuxki.c in the source tree I checked out the
> other day is a different version). Where would the right one
> live?

The patch removed the attachment off the Dell version since it didn't
work with our driver. All this is stated in the commit message. Since
current doesn't attach to the Dell version the patch is still in...
Your card is not supported by emu(4) since it needs a different driver...

-moj

> --
> Ed Ahlsen-Girard