Supermciro X9DRi-F CPU1 Temp and CPU2 Temp sensors

View: New views

2 Messages — Rating Filter: Alert me

Supermciro X9DRi-F CPU1 Temp and CPU2 Temp sensors

by Werner Fischer-2 :: Rate this Message:

| View Threaded | Show Only this Message

Hi Al,

we have tested a new Supermicro mainboard (X9DRi-F)
http://www.supermicro.com/products/motherboard/xeon/c600/x9dri-f.cfm
with FreeIPMI 1.1.5.

The board has Product ID 1576 / Manufacturer ID 10876 - here is the
output of bmc-info:
Device ID : 32
Device Revision : 1
Device SDRs : unsupported
Firmware Revision : 1.63
Device Available : yes (normal operation)
IPMI Version : 2.0
Sensor Device : supported
SDR Repository Device : supported
SEL Device : supported
FRU Inventory Device : supported
IPMB Event Receiver : supported
IPMB Event Generator : supported
Bridge : unsupported
Chassis Device : supported
Manufacturer ID : Super Micro Computer Inc. (10876)
Product ID : 1576

Can you add the tweaks for this product ID in the FreeIPMI code to
support the two CPU Temp sensors? The current output of FreeIPMI 1.1.5
(ipmi-sensors --output-sensor-state --interpret-oem-data)
does not recognize the CPU Temp sensors (in this example case one of
these two sensors shows temperature 'medium' afair from the web
interface):
ID | Name | Type | State | Reading | Units | Event
4 | CPU1 Temp | OEM Reserved | N/A | N/A | N/A | 'OEM Event = 0001h'
71 | CPU2 Temp | OEM Reserved | N/A | N/A | N/A | 'OEM Event = 0007h'
138 | System Temp | Temperature | Nominal | 37.00 | C | 'OK'

FYI here is the verbose output of these two sensors,
ipmi-sensors --output-sensor-state --interpret-oem-data -vv
Record ID: 4
Record Type: Full Sensor Record (1h)
ID String: CPU1 Temp
Sensor Type: OEM Reserved (C0h)
Sensor Number: 1
IPMB Slave Address: 10h
Sensor Owner ID: 20h
Sensor Owner LUN: 0h
Channel Number: 0h
Entity ID: processor (3)
Entity Instance: 1
Entity Instance Type: Physical Entity
Event/Reading Type Code: 70h
Accuracy: 0.000000%
Sensor Direction: Unspecified
Positive Hysteresis: N/A
Negative Hysteresis: N/A
Sensor State: N/A
Sensor Event: 'OEM Event = 0001h'

Record ID: 71
Record Type: Full Sensor Record (1h)
ID String: CPU2 Temp
Sensor Type: OEM Reserved (C0h)
Sensor Number: 2
IPMB Slave Address: 10h
Sensor Owner ID: 20h
Sensor Owner LUN: 0h
Channel Number: 0h
Entity ID: processor (3)
Entity Instance: 1
Entity Instance Type: Physical Entity
Event/Reading Type Code: 70h
Accuracy: 0.000000%
Sensor Direction: Unspecified
Positive Hysteresis: N/A
Negative Hysteresis: N/A
Sensor State: N/A
Sensor Event: 'OEM Event = 0007h'

Thanks in advance and best regards,
Werner

--
: Werner Fischer
: Technology Specialist
: Thomas-Krenn.AG | The server-experts
: http://www.thomas-krenn.com | http://www.thomas-krenn.com/wiki

_______________________________________________
Freeipmi-devel mailing list
Freeipmi-devel@...
https://lists.gnu.org/mailman/listinfo/freeipmi-devel

Re: Supermciro X9DRi-F CPU1 Temp and CPU2 Temp sensors

by Albert Chu :: Rate this Message:

| View Threaded | Show Only this Message

Hi Werner,

It should be in the next release.

Al

On Thu, 2012-05-31 at 23:26 -0700, Werner Fischer wrote:

> Hi Al,
>
> we have tested a new Supermicro mainboard (X9DRi-F)
> http://www.supermicro.com/products/motherboard/xeon/c600/x9dri-f.cfm
> with FreeIPMI 1.1.5.
>
> The board has Product ID 1576 / Manufacturer ID 10876 - here is the
> output of bmc-info:
> Device ID : 32
> Device Revision : 1
> Device SDRs : unsupported
> Firmware Revision : 1.63
> Device Available : yes (normal operation)
> IPMI Version : 2.0
> Sensor Device : supported
> SDR Repository Device : supported
> SEL Device : supported
> FRU Inventory Device : supported
> IPMB Event Receiver : supported
> IPMB Event Generator : supported
> Bridge : unsupported
> Chassis Device : supported
> Manufacturer ID : Super Micro Computer Inc. (10876)
> Product ID : 1576
>
> Can you add the tweaks for this product ID in the FreeIPMI code to
> support the two CPU Temp sensors? The current output of FreeIPMI 1.1.5
> (ipmi-sensors --output-sensor-state --interpret-oem-data)
> does not recognize the CPU Temp sensors (in this example case one of
> these two sensors shows temperature 'medium' afair from the web
> interface):
> ID | Name | Type | State | Reading | Units | Event
> 4 | CPU1 Temp | OEM Reserved | N/A | N/A | N/A | 'OEM Event = 0001h'
> 71 | CPU2 Temp | OEM Reserved | N/A | N/A | N/A | 'OEM Event = 0007h'
> 138 | System Temp | Temperature | Nominal | 37.00 | C | 'OK'
>
> FYI here is the verbose output of these two sensors,
> ipmi-sensors --output-sensor-state --interpret-oem-data -vv
> Record ID: 4
> Record Type: Full Sensor Record (1h)
> ID String: CPU1 Temp
> Sensor Type: OEM Reserved (C0h)
> Sensor Number: 1
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: processor (3)
> Entity Instance: 1
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: 70h
> Accuracy: 0.000000%
> Sensor Direction: Unspecified
> Positive Hysteresis: N/A
> Negative Hysteresis: N/A
> Sensor State: N/A
> Sensor Event: 'OEM Event = 0001h'
>
> Record ID: 71
> Record Type: Full Sensor Record (1h)
> ID String: CPU2 Temp
> Sensor Type: OEM Reserved (C0h)
> Sensor Number: 2
> IPMB Slave Address: 10h
> Sensor Owner ID: 20h
> Sensor Owner LUN: 0h
> Channel Number: 0h
> Entity ID: processor (3)
> Entity Instance: 1
> Entity Instance Type: Physical Entity
> Event/Reading Type Code: 70h
> Accuracy: 0.000000%
> Sensor Direction: Unspecified
> Positive Hysteresis: N/A
> Negative Hysteresis: N/A
> Sensor State: N/A
> Sensor Event: 'OEM Event = 0007h'
>
> Thanks in advance and best regards,
> Werner
>

--
Albert Chu
chu11@...
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory

_______________________________________________
Freeipmi-devel mailing list
Freeipmi-devel@...
https://lists.gnu.org/mailman/listinfo/freeipmi-devel