Nabble - Unicore - Support

Re: connection reset errors & unicore server 6.21

2009-11-27T04:10:15Z

hi,

I can confirm that version 6.22 is much better - my test went well after switching to it
looks like unicore server 6.22 i much more efficient than the previous versions

now I can only suggest to everybody - if you use older unicore server it's better to upgrade to 6.22

I also configured proxy support without any problems (I had some in 6.21 version)

Regards,
Dawid

dejw wrote:

ok then

I will have to switch to the 6.22 and I will see

I did a very simple test: just a loop which submits jsdl jobs one after another
after each submit I got the epr of the job and go further

in the mean time I have some poller thread which checks the state of the job till it is finished.
if completed I also get the url for output and error

I tried to push over 500 hundred jobs in this way and after a first 20-30 simultaneous (so quite fast) job run and status checking from time to time I got errors I wrote about
The job was simple like 'ls' or 'date'

Regards,
Dawid

Bernd Schuller wrote:

hi Dawid,

first of all, you should upgrade to 6.2.2 :-), we did lots of work
to improve scalability and throughput compared to 6.2.1

This should be better, but of course at some point you'll run
into scalability issues. Would be interesting what these are
in your case, what kind of load generation strategy you use, etc.

Best regards,
Bernd.

On Do, 2009-11-26 at 10:55 +0100, dejw wrote:

Hi,

I'm testing unicore server 6.21 (core server bundle with standard settings)

I tried to make some kind of jsdl job flood - and I can see taht from
time to time I had connection reset errors on the server side in gateway
log - job jobs are failed.

It could be due to wrong configuration or something. Is there any
official instruction how to set up environment to maximize throughout ?

Additionally I got weird nullpointer errors on the client side which
did not occur  at normal  rate while doing the same thing (job submit).
Errors are below.

Server side error:

2009-11-26 10:41:16,156 [1792194126@qtp-1323423210-26 -
/TEST-SITE/services/TargetSystemService?res=9e86f618-9f18-463f-a488-c5d2b2384b6c]
DEBUG JettyLogger  - Stack trace
com.ctc.wstx.exc.WstxIOException: Connection reset
        at
com.ctc.wstx.stax.WstxInputFactory.doCreateSR(WstxInputFactory.java:548)
        at
com.ctc.wstx.stax.WstxInputFactory.createSR(WstxInputFactory.java:604)
        at
com.ctc.wstx.stax.WstxInputFactory.createSR(WstxInputFactory.java:629)
        at
com.ctc.wstx.stax.WstxInputFactory.createXMLStreamReader(WstxInputFactory.java:324)
        at eu.unicore.gateway.GatewayHandler.invoke(GatewayHandler.java:216)
        at eu.unicore.gateway.base.Servlet.doPost(Servlet.java:296)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at eu.unicore.gateway.base.Servlet.service(Servlet.java:95)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at
org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:502)
        at
org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:380)
        at
org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181)
        at
org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)
        at
org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
        at org.mortbay.jetty.Server.handle(Server.java:320)
        at
org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:535)
        at
eu.unicore.gateway.util.CustomHttpConnection.handleRequest(CustomHttpConnection.java:31)
        at
org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:880)
        at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:747)
        at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:212)
        at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
        at
org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228)
        at
org.mortbay.jetty.security.SslSocketConnector$SslConnection.run(SslSocketConnector.java:636)
        at
org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:520)
Caused by: java.net.SocketException: Connection reset
        at java.net.SocketInputStream.read(SocketInputStream.java:168)
        at
com.sun.net.ssl.internal.ssl.InputRecord.readFully(InputRecord.java:293)
        at
com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java:331)
        at
com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:723)
        at
com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(SSLSocketImpl.java:680)
        at
com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:75)
        at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
        at java.io.BufferedInputStream.read1(BufferedInputStream.java:256)
        at java.io.BufferedInputStream.read(BufferedInputStream.java:313)
        at java.io.FilterInputStream.read(FilterInputStream.java:111)
        at
org.apache.commons.httpclient.AutoCloseInputStream.read(AutoCloseInputStream.java:108)
        at
java.util.zip.InflaterInputStream.fill(InflaterInputStream.java:214)
        at
java.util.zip.InflaterInputStream.read(InflaterInputStream.java:134)
        at java.util.zip.GZIPInputStream.read(GZIPInputStream.java:87)
        at java.io.FilterInputStream.read(FilterInputStream.java:90)
        at com.ctc.wstx.io.UTF8Reader.loadMore(UTF8Reader.java:365)
        at com.ctc.wstx.io.UTF8Reader.read(UTF8Reader.java:110)
        at
com.ctc.wstx.io.ReaderBootstrapper.initialLoad(ReaderBootstrapper.java:245)
        at
com.ctc.wstx.io.ReaderBootstrapper.bootstrapInput(ReaderBootstrapper.java:132)
        at
com.ctc.wstx.stax.WstxInputFactory.doCreateSR(WstxInputFactory.java:543)
        ... 23 more


Client side errors. (occurred only while many requests were sent)

java.lang.NullPointerException
    at de.fzj.unicore.uas.client.TSSClient.submit(TSSClient.java:91)
    .....................



client.StorageClient - Can't create import client.
java.lang.NullPointerException
    at
de.fzj.unicore.uas.client.StorageClient.getExport(StorageClient.java:433)
    at
de.fzj.unicore.uas.client.StorageClient.getExport(StorageClient.java:456)
    ...................

Regards,
Dawid

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

--
Dr. Bernd Schuller
Distributed Systems and Grid Computing
Juelich Supercomputing Centre, http://www.fz-juelich.de/jsc
Phone: +49 246161-8736 (fax -8556)
Personal blog: www.jroller.com/page/gridhaus


------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------


------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
trial. Simplify your report design, integration and deployment - and focus on 
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july


_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: connection reset errors & unicore server 6.21

2009-11-26T07:17:35Z

Hi Dawid,

We successfully use the UNICORE Commandline client in batch mode to
handle/submit many jobs.
http://www.unicore.eu/documentation/manuals/unicore6/ucc/batch.html
It works well and efficiently.

Best,
Richard

dejw wrote:

> ok then
>
> I will have to switch to the 6.22 and I will see
>
> I did a very simple test: just a loop which submits jsdl jobs one after
> another
> after each submit I got the epr of the job and go further
>
> in the mean time I have some poller thread which checks the state of the
> job till it is finished.
> if completed I also get the url for output and error
>
> I tried to push over 500 hundred jobs in this way and after a first
> 20-30 simultaneous (so quite fast) job run and status checking from time
> to time I got errors I wrote about
> The job was simple like 'ls' or 'date'
>
> Regards,
> Dawid
>
> Bernd Schuller wrote:
>> hi Dawid,
>>
>> first of all, you should upgrade to 6.2.2 :-), we did lots of work
>> to improve scalability and throughput compared to 6.2.1
>>
>> This should be better, but of course at some point you'll run
>> into scalability issues. Would be interesting what these are
>> in your case, what kind of load generation strategy you use, etc.
>>
>> Best regards,
>> Bernd.
>>
>> On Do, 2009-11-26 at 10:55 +0100, dejw wrote:
>>
>>> Hi,
>>>
>>> I'm testing unicore server 6.21 (core server bundle with standard settings)
>>>
>>> I tried to make some kind of jsdl job flood - and I can see taht from
>>> time to time I had connection reset errors on the server side in gateway
>>> log - job jobs are failed.
>>>
>>> It could be due to wrong configuration or something. Is there any
>>> official instruction how to set up environment to maximize throughout ?
>>>
>>> Additionally I got weird nullpointer errors on the client side which
>>> did not occur at normal rate while doing the same thing (job submit).
>>> Errors are below.
>>>
>>> Server side error:
>>>
>>> 2009-11-26 10:41:16,156 [1792194126@qtp-1323423210-26 -
>>> /TEST-SITE/services/TargetSystemService?res=9e86f618-9f18-463f-a488-c5d2b2384b6c]
>>> DEBUG JettyLogger - Stack trace
>>> com.ctc.wstx.exc.WstxIOException: Connection reset
>>> at
>>> com.ctc.wstx.stax.WstxInputFactory.doCreateSR(WstxInputFactory.java:548)
>>> at
>>> com.ctc.wstx.stax.WstxInputFactory.createSR(WstxInputFactory.java:604)
>>> at
>>> com.ctc.wstx.stax.WstxInputFactory.createSR(WstxInputFactory.java:629)
>>> at
>>> com.ctc.wstx.stax.WstxInputFactory.createXMLStreamReader(WstxInputFactory.java:324)
>>> at eu.unicore.gateway.GatewayHandler.invoke(GatewayHandler.java:216)
>>> at eu.unicore.gateway.base.Servlet.doPost(Servlet.java:296)
>>> at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
>>> at eu.unicore.gateway.base.Servlet.service(Servlet.java:95)
>>> at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
>>> at
>>> org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:502)
>>> at
>>> org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:380)
>>> at
>>> org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181)
>>> at
>>> org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)
>>> at
>>> org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
>>> at org.mortbay.jetty.Server.handle(Server.java:320)
>>> at
>>> org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:535)
>>> at
>>> eu.unicore.gateway.util.CustomHttpConnection.handleRequest(CustomHttpConnection.java:31)
>>> at
>>> org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:880)
>>> at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:747)
>>> at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:212)
>>> at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
>>> at
>>> org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228)
>>> at
>>> org.mortbay.jetty.security.SslSocketConnector$SslConnection.run(SslSocketConnector.java:636)
>>> at
>>> org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:520)
>>> Caused by: java.net.SocketException: Connection reset
>>> at java.net.SocketInputStream.read(SocketInputStream.java:168)
>>> at
>>> com.sun.net.ssl.internal.ssl.InputRecord.readFully(InputRecord.java:293)
>>> at
>>> com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java:331)
>>> at
>>> com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:723)
>>> at
>>> com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(SSLSocketImpl.java:680)
>>> at
>>> com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:75)
>>> at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
>>> at java.io.BufferedInputStream.read1(BufferedInputStream.java:256)
>>> at java.io.BufferedInputStream.read(BufferedInputStream.java:313)
>>> at java.io.FilterInputStream.read(FilterInputStream.java:111)
>>> at
>>> org.apache.commons.httpclient.AutoCloseInputStream.read(AutoCloseInputStream.java:108)
>>> at
>>> java.util.zip.InflaterInputStream.fill(InflaterInputStream.java:214)
>>> at
>>> java.util.zip.InflaterInputStream.read(InflaterInputStream.java:134)
>>> at java.util.zip.GZIPInputStream.read(GZIPInputStream.java:87)
>>> at java.io.FilterInputStream.read(FilterInputStream.java:90)
>>> at com.ctc.wstx.io.UTF8Reader.loadMore(UTF8Reader.java:365)
>>> at com.ctc.wstx.io.UTF8Reader.read(UTF8Reader.java:110)
>>> at
>>> com.ctc.wstx.io.ReaderBootstrapper.initialLoad(ReaderBootstrapper.java:245)
>>> at
>>> com.ctc.wstx.io.ReaderBootstrapper.bootstrapInput(ReaderBootstrapper.java:132)
>>> at
>>> com.ctc.wstx.stax.WstxInputFactory.doCreateSR(WstxInputFactory.java:543)
>>> ... 23 more
>>>
>>>
>>> Client side errors. (occurred only while many requests were sent)
>>>
>>> java.lang.NullPointerException
>>> at de.fzj.unicore.uas.client.TSSClient.submit(TSSClient.java:91)
>>> .....................
>>>
>>>
>>>
>>> client.StorageClient - Can't create import client.
>>> java.lang.NullPointerException
>>> at
>>> de.fzj.unicore.uas.client.StorageClient.getExport(StorageClient.java:433)
>>> at
>>> de.fzj.unicore.uas.client.StorageClient.getExport(StorageClient.java:456)
>>> ...................
>>>
>>> Regards,
>>> Dawid
>>>
>>> ------------------------------------------------------------------------------
>>> Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
>>> trial. Simplify your report design, integration and deployment - and focus on
>>> what you do best, core application coding. Discover what's new with
>>> Crystal Reports now. http://p.sf.net/sfu/bobj-july
>>> _______________________________________________
>>> Unicore-support mailing list
>>> Unicore-support@...
>>> https://lists.sourceforge.net/lists/listinfo/unicore-support
>>>
>> --
>> Dr. Bernd Schuller
>> Distributed Systems and Grid Computing
>> Juelich Supercomputing Centre, http://www.fz-juelich.de/jsc
>> Phone: +49 246161-8736 (fax -8556)
>> Personal blog: www.jroller.com/page/gridhaus
>>
>>
>> ------------------------------------------------------------------------------------------------
>> ------------------------------------------------------------------------------------------------
>> Forschungszentrum Juelich GmbH
>> 52425 Juelich
>> Sitz der Gesellschaft: Juelich
>> Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
>> Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
>> Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
>> Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
>> Prof. Dr. Sebastian M. Schmidt
>> ------------------------------------------------------------------------------------------------
>> ------------------------------------------------------------------------------------------------
>>
>
>
>
> ------------------------------------------------------------------------
>
> ------------------------------------------------------------------------------
> Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
> trial. Simplify your report design, integration and deployment - and focus on
> what you do best, core application coding. Discover what's new with
> Crystal Reports now. http://p.sf.net/sfu/bobj-july
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Unicore-support mailing list
> Unicore-support@...
> https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: connection reset errors & unicore server 6.21

2009-11-26T02:57:45Z

hi Dawid,

first of all, you should upgrade to 6.2.2 :-), we did lots of work
to improve scalability and throughput compared to 6.2.1

This should be better, but of course at some point you'll run
into scalability issues. Would be interesting what these are
in your case, what kind of load generation strategy you use, etc.

Best regards,
Bernd.

On Do, 2009-11-26 at 10:55 +0100, dejw wrote:

Hi,

I'm testing unicore server 6.21 (core server bundle with standard settings)

I tried to make some kind of jsdl job flood - and I can see taht from
time to time I had connection reset errors on the server side in gateway
log - job jobs are failed.

It could be due to wrong configuration or something. Is there any
official instruction how to set up environment to maximize throughout ?

Additionally I got weird nullpointer errors on the client side which
did not occur  at normal  rate while doing the same thing (job submit).
Errors are below.

Server side error:

2009-11-26 10:41:16,156 [1792194126@qtp-1323423210-26 -
/TEST-SITE/services/TargetSystemService?res=9e86f618-9f18-463f-a488-c5d2b2384b6c]
DEBUG JettyLogger  - Stack trace
com.ctc.wstx.exc.WstxIOException: Connection reset
        at
com.ctc.wstx.stax.WstxInputFactory.doCreateSR(WstxInputFactory.java:548)
        at
com.ctc.wstx.stax.WstxInputFactory.createSR(WstxInputFactory.java:604)
        at
com.ctc.wstx.stax.WstxInputFactory.createSR(WstxInputFactory.java:629)
        at
com.ctc.wstx.stax.WstxInputFactory.createXMLStreamReader(WstxInputFactory.java:324)
        at eu.unicore.gateway.GatewayHandler.invoke(GatewayHandler.java:216)
        at eu.unicore.gateway.base.Servlet.doPost(Servlet.java:296)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at eu.unicore.gateway.base.Servlet.service(Servlet.java:95)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at
org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:502)
        at
org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:380)
        at
org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181)
        at
org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)
        at
org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
        at org.mortbay.jetty.Server.handle(Server.java:320)
        at
org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:535)
        at
eu.unicore.gateway.util.CustomHttpConnection.handleRequest(CustomHttpConnection.java:31)
        at
org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:880)
        at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:747)
        at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:212)
        at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
        at
org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228)
        at
org.mortbay.jetty.security.SslSocketConnector$SslConnection.run(SslSocketConnector.java:636)
        at
org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:520)
Caused by: java.net.SocketException: Connection reset
        at java.net.SocketInputStream.read(SocketInputStream.java:168)
        at
com.sun.net.ssl.internal.ssl.InputRecord.readFully(InputRecord.java:293)
        at
com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java:331)
        at
com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:723)
        at
com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(SSLSocketImpl.java:680)
        at
com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:75)
        at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
        at java.io.BufferedInputStream.read1(BufferedInputStream.java:256)
        at java.io.BufferedInputStream.read(BufferedInputStream.java:313)
        at java.io.FilterInputStream.read(FilterInputStream.java:111)
        at
org.apache.commons.httpclient.AutoCloseInputStream.read(AutoCloseInputStream.java:108)
        at
java.util.zip.InflaterInputStream.fill(InflaterInputStream.java:214)
        at
java.util.zip.InflaterInputStream.read(InflaterInputStream.java:134)
        at java.util.zip.GZIPInputStream.read(GZIPInputStream.java:87)
        at java.io.FilterInputStream.read(FilterInputStream.java:90)
        at com.ctc.wstx.io.UTF8Reader.loadMore(UTF8Reader.java:365)
        at com.ctc.wstx.io.UTF8Reader.read(UTF8Reader.java:110)
        at
com.ctc.wstx.io.ReaderBootstrapper.initialLoad(ReaderBootstrapper.java:245)
        at
com.ctc.wstx.io.ReaderBootstrapper.bootstrapInput(ReaderBootstrapper.java:132)
        at
com.ctc.wstx.stax.WstxInputFactory.doCreateSR(WstxInputFactory.java:543)
        ... 23 more


Client side errors. (occurred only while many requests were sent)

java.lang.NullPointerException
    at de.fzj.unicore.uas.client.TSSClient.submit(TSSClient.java:91)
    .....................



client.StorageClient - Can't create import client.
java.lang.NullPointerException
    at
de.fzj.unicore.uas.client.StorageClient.getExport(StorageClient.java:433)
    at
de.fzj.unicore.uas.client.StorageClient.getExport(StorageClient.java:456)
    ...................

Regards,
Dawid

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

--
Dr. Bernd Schuller
Distributed Systems and Grid Computing
Juelich Supercomputing Centre, http://www.fz-juelich.de/jsc
Phone: +49 246161-8736 (fax -8556)
Personal blog: www.jroller.com/page/gridhaus


------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------

Re: connection reset errors & unicore server 6.21

2009-11-26T02:51:00Z

hi Dawid,

first of all, you should upgrade to 6.2.2 :-), we did lots of work
to improve scalability and throughput compared to 6.2.1

This should be better, but of course at some point you'll run
into scalability issues. Would be interesting what these are
in your case, what kind of load generation strategy you use, etc.

Best regards,
Bernd.

On Do, 2009-11-26 at 10:55 +0100, dejw wrote:

> Hi,
>
> I'm testing unicore server 6.21 (core server bundle with standard settings)
>
> I tried to make some kind of jsdl job flood - and I can see taht from
> time to time I had connection reset errors on the server side in gateway
> log - job jobs are failed.
>
> It could be due to wrong configuration or something. Is there any
> official instruction how to set up environment to maximize throughout ?
>
> Additionally I got weird nullpointer errors on the client side which
> did not occur at normal rate while doing the same thing (job submit).
> Errors are below.
>
> Server side error:
>
> 2009-11-26 10:41:16,156 [1792194126@qtp-1323423210-26 -
> /TEST-SITE/services/TargetSystemService?res=9e86f618-9f18-463f-a488-c5d2b2384b6c]
> DEBUG JettyLogger - Stack trace
> com.ctc.wstx.exc.WstxIOException: Connection reset
> at
> com.ctc.wstx.stax.WstxInputFactory.doCreateSR(WstxInputFactory.java:548)
> at
> com.ctc.wstx.stax.WstxInputFactory.createSR(WstxInputFactory.java:604)
> at
> com.ctc.wstx.stax.WstxInputFactory.createSR(WstxInputFactory.java:629)
> at
> com.ctc.wstx.stax.WstxInputFactory.createXMLStreamReader(WstxInputFactory.java:324)
> at eu.unicore.gateway.GatewayHandler.invoke(GatewayHandler.java:216)
> at eu.unicore.gateway.base.Servlet.doPost(Servlet.java:296)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
> at eu.unicore.gateway.base.Servlet.service(Servlet.java:95)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
> at
> org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:502)
> at
> org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:380)
> at
> org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181)
> at
> org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)
> at
> org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
> at org.mortbay.jetty.Server.handle(Server.java:320)
> at
> org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:535)
> at
> eu.unicore.gateway.util.CustomHttpConnection.handleRequest(CustomHttpConnection.java:31)
> at
> org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:880)
> at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:747)
> at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:212)
> at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
> at
> org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228)
> at
> org.mortbay.jetty.security.SslSocketConnector$SslConnection.run(SslSocketConnector.java:636)
> at
> org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:520)
> Caused by: java.net.SocketException: Connection reset
> at java.net.SocketInputStream.read(SocketInputStream.java:168)
> at
> com.sun.net.ssl.internal.ssl.InputRecord.readFully(InputRecord.java:293)
> at
> com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java:331)
> at
> com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:723)
> at
> com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(SSLSocketImpl.java:680)
> at
> com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:75)
> at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
> at java.io.BufferedInputStream.read1(BufferedInputStream.java:256)
> at java.io.BufferedInputStream.read(BufferedInputStream.java:313)
> at java.io.FilterInputStream.read(FilterInputStream.java:111)
> at
> org.apache.commons.httpclient.AutoCloseInputStream.read(AutoCloseInputStream.java:108)
> at
> java.util.zip.InflaterInputStream.fill(InflaterInputStream.java:214)
> at
> java.util.zip.InflaterInputStream.read(InflaterInputStream.java:134)
> at java.util.zip.GZIPInputStream.read(GZIPInputStream.java:87)
> at java.io.FilterInputStream.read(FilterInputStream.java:90)
> at com.ctc.wstx.io.UTF8Reader.loadMore(UTF8Reader.java:365)
> at com.ctc.wstx.io.UTF8Reader.read(UTF8Reader.java:110)
> at
> com.ctc.wstx.io.ReaderBootstrapper.initialLoad(ReaderBootstrapper.java:245)
> at
> com.ctc.wstx.io.ReaderBootstrapper.bootstrapInput(ReaderBootstrapper.java:132)
> at
> com.ctc.wstx.stax.WstxInputFactory.doCreateSR(WstxInputFactory.java:543)
> ... 23 more
>
>
> Client side errors. (occurred only while many requests were sent)
>
> java.lang.NullPointerException
> at de.fzj.unicore.uas.client.TSSClient.submit(TSSClient.java:91)
> .....................
>
>
>
> client.StorageClient - Can't create import client.
> java.lang.NullPointerException
> at
> de.fzj.unicore.uas.client.StorageClient.getExport(StorageClient.java:433)
> at
> de.fzj.unicore.uas.client.StorageClient.getExport(StorageClient.java:456)
> ...................
>
> Regards,
> Dawid
>
> ------------------------------------------------------------------------------
> Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
> trial. Simplify your report design, integration and deployment - and focus on
> what you do best, core application coding. Discover what's new with
> Crystal Reports now. http://p.sf.net/sfu/bobj-july
> _______________________________________________
> Unicore-support mailing list
> Unicore-support@...
> https://lists.sourceforge.net/lists/listinfo/unicore-support

--
Dr. Bernd Schuller
Distributed Systems and Grid Computing
Juelich Supercomputing Centre, http://www.fz-juelich.de/jsc
Phone: +49 246161-8736 (fax -8556)
Personal blog: www.jroller.com/page/gridhaus

------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

connection reset errors & unicore server 6.21

2009-11-26T01:55:17Z

Hi,

I'm testing unicore server 6.21 (core server bundle with standard settings)

I tried to make some kind of jsdl job flood - and I can see taht from
time to time I had connection reset errors on the server side in gateway
log - job jobs are failed.

It could be due to wrong configuration or something. Is there any
official instruction how to set up environment to maximize throughout ?

Additionally I got weird nullpointer errors on the client side which
did not occur at normal rate while doing the same thing (job submit).
Errors are below.

Server side error:

2009-11-26 10:41:16,156 [1792194126@qtp-1323423210-26 -
/TEST-SITE/services/TargetSystemService?res=9e86f618-9f18-463f-a488-c5d2b2384b6c]
DEBUG JettyLogger - Stack trace
com.ctc.wstx.exc.WstxIOException: Connection reset
at
com.ctc.wstx.stax.WstxInputFactory.doCreateSR(WstxInputFactory.java:548)
at
com.ctc.wstx.stax.WstxInputFactory.createSR(WstxInputFactory.java:604)
at
com.ctc.wstx.stax.WstxInputFactory.createSR(WstxInputFactory.java:629)
at
com.ctc.wstx.stax.WstxInputFactory.createXMLStreamReader(WstxInputFactory.java:324)
at eu.unicore.gateway.GatewayHandler.invoke(GatewayHandler.java:216)
at eu.unicore.gateway.base.Servlet.doPost(Servlet.java:296)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at eu.unicore.gateway.base.Servlet.service(Servlet.java:95)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at
org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:502)
at
org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:380)
at
org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181)
at
org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)
at
org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
at org.mortbay.jetty.Server.handle(Server.java:320)
at
org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:535)
at
eu.unicore.gateway.util.CustomHttpConnection.handleRequest(CustomHttpConnection.java:31)
at
org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:880)
at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:747)
at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:212)
at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
at
org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228)
at
org.mortbay.jetty.security.SslSocketConnector$SslConnection.run(SslSocketConnector.java:636)
at
org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:520)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at
com.sun.net.ssl.internal.ssl.InputRecord.readFully(InputRecord.java:293)
at
com.sun.net.ssl.internal.ssl.InputRecord.read(InputRecord.java:331)
at
com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:723)
at
com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(SSLSocketImpl.java:680)
at
com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:75)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:218)
at java.io.BufferedInputStream.read1(BufferedInputStream.java:256)
at java.io.BufferedInputStream.read(BufferedInputStream.java:313)
at java.io.FilterInputStream.read(FilterInputStream.java:111)
at
org.apache.commons.httpclient.AutoCloseInputStream.read(AutoCloseInputStream.java:108)
at
java.util.zip.InflaterInputStream.fill(InflaterInputStream.java:214)
at
java.util.zip.InflaterInputStream.read(InflaterInputStream.java:134)
at java.util.zip.GZIPInputStream.read(GZIPInputStream.java:87)
at java.io.FilterInputStream.read(FilterInputStream.java:90)
at com.ctc.wstx.io.UTF8Reader.loadMore(UTF8Reader.java:365)
at com.ctc.wstx.io.UTF8Reader.read(UTF8Reader.java:110)
at
com.ctc.wstx.io.ReaderBootstrapper.initialLoad(ReaderBootstrapper.java:245)
at
com.ctc.wstx.io.ReaderBootstrapper.bootstrapInput(ReaderBootstrapper.java:132)
at
com.ctc.wstx.stax.WstxInputFactory.doCreateSR(WstxInputFactory.java:543)
... 23 more

Client side errors. (occurred only while many requests were sent)

java.lang.NullPointerException
at de.fzj.unicore.uas.client.TSSClient.submit(TSSClient.java:91)
.....................

client.StorageClient - Can't create import client.
java.lang.NullPointerException
at
de.fzj.unicore.uas.client.StorageClient.getExport(StorageClient.java:433)
at
de.fzj.unicore.uas.client.StorageClient.getExport(StorageClient.java:456)
...................

Regards,
Dawid

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: problem with UNICORE6 workflow service

2009-11-25T08:59:24Z

Hi,

Georg Birkenheuer wrote:

> Hi Bastian,
> yes, that was a fault and the null parameter vanished.
>
> 2009-11-25 16:29:37,589 [17010151@qtp-10127976-0] DEBUG SecurityToken -
> Cannot create an instance of X500Name from:
> 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
> Trying to get an instance of X509Certificate and then extract the DN...
> 2009-11-25 16:29:37,594 [17010151@qtp-10127976-0] DEBUG Database -
> org.hsqldb.jdbc.jdbcPreparedStatement@153b2cb[sql=[SELECT * FROM uudb
> WHERE gcid = ? AND token = ?], parameters=[[WORKFLOW-BisGrid], [CN=Georg
> Birkenheuer,OU=PCPC,OU=Universitaet Paderborn,O=GridGermany,C=DE]]]
>
> However the problem with the workflow system itself, looks the same.
>

Hmm, weird. The null parameter by itself would actually have caused the
access denied we are seeing.
Now that you are getting data from the XUUDB, the only possible reason I
know is that sth. is wrong with your security policy. Does the
conf/xacml.config file point to the conf/security_policy.xml in your
workflow engine configuration like this:

<policyFinderModule class="com.sun.xacml.finder.impl.FilePolicyModule">
<list>
<string>conf/security_policy.xml</string>
</list>
</policyFinderModule>

Do you have the appropriate rule for accessing the WorkflowFactory in
your conf/security_policy.xml:

<Rule RuleId="Permit:WorkflowFactory_for_user" Effect="Permit">
<Description>
Access to the WorkflowFacotry is granted for authorised users.
</Description>
<Target>
<Subjects>
<AnySubject/>
</Subjects>
<Resources>
<Resource>
<ResourceMatch
MatchId="urn:oasis:names:tc:xacml:1.0:function:anyURI-equal">
<AttributeValue
DataType="http://www.w3.org/2001/XMLSchema#anyURI">WorkflowFactory</AttributeValue>
<ResourceAttributeDesignator
AttributeId="urn:oasis:names:tc:xacml:1.0:resource:resource-id"
DataType="http://www.w3.org/2001/XMLSchema#anyURI" MustBePresent="true"/>
</ResourceMatch>
</Resource>
</Resources>
<Actions>
<AnyAction/>
</Actions>
</Target>
<Condition
FunctionId="urn:oasis:names:tc:xacml:1.0:function:string-equal">
<Apply
FunctionId="urn:oasis:names:tc:xacml:1.0:function:string-one-and-only">
<SubjectAttributeDesignator AttributeId="role"
DataType="http://www.w3.org/2001/XMLSchema#string" MustBePresent="true"/>
</Apply>
<AttributeValue
DataType="http://www.w3.org/2001/XMLSchema#string">user</AttributeValue>
</Condition>
</Rule>

If so, I'm running out of explanations...

Best,
Bastian

------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: problem with UNICORE6 workflow service

2009-11-25T07:48:03Z

Hi Bastian,
yes, that was a fault and the null parameter vanished.

2009-11-25 16:29:37,589 [17010151@qtp-10127976-0] DEBUG SecurityToken -
Cannot create an instance of X500Name from:
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
Trying to get an instance of X509Certificate and then extract the DN...
2009-11-25 16:29:37,594 [17010151@qtp-10127976-0] DEBUG Database -
org.hsqldb.jdbc.jdbcPreparedStatement@153b2cb[sql=[SELECT * FROM uudb
WHERE gcid = ? AND token = ?], parameters=[[WORKFLOW-BisGrid], [CN=Georg
Birkenheuer,OU=PCPC,OU=Universitaet Paderborn,O=GridGermany,C=DE]]]

However the problem with the workflow system itself, looks the same.

2009-11-25 16:29:37,599 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpMethodBase - enter HttpMethodBase.processCookieHeaders(Header[],
HttpState, HttpConnection)
2009-11-25 16:29:37,599 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpMethodBase - enter HttpMethodBase.readResponseBody(HttpState,
HttpConnection)
2009-11-25 16:29:37,599 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpMethodBase - enter HttpMethodBase.readResponseBody(HttpConnection)
2009-11-25 16:29:37,599 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpConnection - enter HttpConnection.getResponseInputStream()
2009-11-25 16:29:37,599 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpMethodBase - enter HttpMethodBase.canResponseHaveBody(int)
2009-11-25 16:29:37,599 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
content - << "<soap:Envelope
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><soap:Body><checkCertificateResponse
xmlns="http://www.fz-juelich.de/unicore/xuudb"><gcID>WORKFLOW-BisGrid</gcID><Token>CN=Georg
Birkenheuer,OU=PCPC,OU=Universitaet
Paderborn,O=GridGermany,C=DE</Token><xlogin>dgkg0017:dgls0012</xlogin><role>user</role><projects
/></checkCertificateResponse></soap:Body></soap:Envelope>"
2009-11-25 16:29:37,602 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpMethodBase - Should close connection in response to directive: close
2009-11-25 16:29:37,602 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpConnection - enter HttpConnection.close()
2009-11-25 16:29:37,602 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpConnection - enter HttpConnection.closeSockedAndStreams()
2009-11-25 16:29:37,602 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpConnection - enter HttpConnection.releaseConnection()
2009-11-25 16:29:37,602 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpConnection - Releasing connection back to connection manager.
2009-11-25 16:29:37,602 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
MultiThreadedHttpConnectionManager - enter
HttpConnectionManager.releaseConnection(HttpConnection)
2009-11-25 16:29:37,602 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
MultiThreadedHttpConnectionManager - Freeing connection,
hostConfig=HostConfiguration[host=https://unicore6-bisgrid.uni-paderborn.de:34463]
2009-11-25 16:29:37,602 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
MultiThreadedHttpConnectionManager - enter
HttpConnectionManager.ConnectionPool.getHostPool(HostConfiguration)
2009-11-25 16:29:37,602 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
IdleConnectionHandler - Adding connection at: 1259162977602
2009-11-25 16:29:37,602 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
MultiThreadedHttpConnectionManager - Notifying no-one, there are no
waiting threads
2009-11-25 16:29:37,602 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
ReliableProxy - Result [<checkCertificateResponse
xmlns="http://www.fz-juelich.de/unicore/xuudb"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<gcID>WORKFLOW-BisGrid</gcID>
<Token>CN=Georg Birkenheuer,OU=PCPC,OU=Universitaet
Paderborn,O=GridGermany,C=DE</Token>
<xlogin>dgkg0017:dgls0012</xlogin>
<role>user</role>
<projects/>
</checkCertificateResponse>]
2009-11-25 16:29:37,607 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG UAS -
Check
<http://docs.oasis-open.org/wsrf/rpw-2/GetResourcePropertyDocument/GetResourcePropertyDocumentRequest>
= false
2009-11-25 16:29:37,615 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] INFO
SecurityManager - Access denied for CN=Georg Birkenheuer, OU=PCPC,
OU=Universitaet Paderborn, O=GridGermany, C=DE on resource
WorkflowFactory[default_workflow_submission][owner:
CN=workflow.unicore6-bisgrid.uni-paderborn.de,OU=PCPC,OU=Universitaet
Paderborn,O=GridGermany,C=DE]
2009-11-25 16:29:37,616 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] ERROR
DefaultFaultHandler - Fault occurred!
de.fzj.unicore.uas.security.AuthorisationException: Access denied for
CN=Georg Birkenheuer, OU=PCPC, OU=Universitaet Paderborn, O=GridGermany,
C=DE on resource WorkflowFactory[default_workflow_submission][owner:
CN=workflow.unicore6-bisgrid.uni-paderborn.de,OU=PCPC,OU=Universitaet
Paderborn,O=GridGermany,C=DE]
at
de.fzj.unicore.uas.security.SecurityManager.checkAuthorisation(SecurityManager.java:510)
at
de.fzj.unicore.uas.security.AccessControl.checkAccess(AccessControl.java:192)
at
de.fzj.unicore.wsrflite.xfire.WSRFInvoker.getServiceObject(WSRFInvoker.java:144)
at
org.codehaus.xfire.service.invoker.AbstractInvoker.invoke(AbstractInvoker.java:29)
at
de.fzj.unicore.wsrflite.xfire.WSRFInvoker.invoke(WSRFInvoker.java:173)
at
org.codehaus.xfire.service.binding.ServiceInvocationHandler.sendMessage(ServiceInvocationHandler.java:320)
at
org.codehaus.xfire.service.binding.ServiceInvocationHandler$1.run(ServiceInvocationHandler.java:86)
at
org.codehaus.xfire.service.binding.ServiceInvocationHandler.execute(ServiceInvocationHandler.java:134)
at
org.codehaus.xfire.service.binding.ServiceInvocationHandler.invoke(ServiceInvocationHandler.java:109)
at
org.codehaus.xfire.handler.HandlerPipeline.invoke(HandlerPipeline.java:131)
at
org.codehaus.xfire.transport.DefaultEndpoint.onReceive(DefaultEndpoint.java:64)
at
org.codehaus.xfire.transport.AbstractChannel.receive(AbstractChannel.java:38)
at
org.codehaus.xfire.transport.http.XFireServletController.invoke(XFireServletController.java:304)
at
org.codehaus.xfire.transport.http.XFireServletController.doService(XFireServletController.java:129)
at
org.codehaus.xfire.transport.http.XFireServlet.doPost(XFireServlet.java:116)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at
org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:502)
at
org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:389)
at
org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181)
at
org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)
at
org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
at org.mortbay.jetty.Server.handle(Server.java:322)
at
org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:534)
at
org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:879)
at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:834)
at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:212)
at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
at
org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228)
at
org.mortbay.jetty.security.SslSocketConnector$SslConnection.run(SslSocketConnector.java:636)
at
org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:520)
2009-11-25 16:29:37,619 [6903079@qtp-20050612-1 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
JettyLogger - RESPONSE /services/WorkflowFactory 500
2009-11-25 16:29:41,993 [pool-2-thread-1] DEBUG ComponentFinder -
Trying to find components in Registry entries...
2009-11-25 16:29:41,994 [pool-2-thread-1] DEBUG RegistryCrawler -
Searching for instances of type: TracerService
2009-11-25 16:29:41,995 [pool-2-thread-1] DEBUG ReliableProxy - Method
[QueryResourceProperties] [<QueryResourceProperties
xmlns="http://docs.oasis-open.org/wsrf/rp-2">
<QueryExpression
Dialect="http://www.w3.org/TR/1999/REC-xpath-19991116">declare namespace
sg='http://docs.oasis-open.org/wsrf/sg-2' ;
declare namespace add='http://www.w3.org/2005/08/addressing';
declare namespace meta='http://www.w3.org/2005/08/addressing/metadata';
.//sg:ServiceGroupRP/sg:Entry/sg:MemberServiceEPR/add:Metadata/meta:InterfaceName[matches(.,'TracerService[
.*]?$')]/ancestor::sg:Entry</QueryExpression>
</QueryResourceProperties>]

Best,
Georg

Bastian Demuth schrieb:
> Hi Georg,
> well, the property in your uas.config should be called
> *xuudb_gcid*, not *uudb_gcid*.
>
> Hope this helps,
> Bastian
>
>

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: problem with UNICORE6 workflow service

2009-11-25T07:17:59Z

Hi Georg,
well, the property in your uas.config should be called
*xuudb_gcid*, not *uudb_gcid*.

Hope this helps,
Bastian

Georg Birkenheuer wrote:

> Hi Bastian,
>
> Bastian Demuth schrieb:
>
>> Could you provide the output of a
>> bin/admin.sh list
>> command from your XUUDB?
>>
> [birke@unicore6-bisgrid xuudb]$ bin/admin.sh list | grep Birken
> 252|bisgrid |dgkg0017:dgls0012|user
> |kerndgrid:lifescience|CN=Georg Birkenheuer, OU=PCPC, OU=Universitaet
> Paderborn, O=GridGermany, C=DE
> 360|WORKFLOW-BisGrid |dgkg0017:dgls0012|user
> | |CN=Georg Birkenheuer, OU=PCPC, OU=Universitaet
> Paderborn, O=GridGermany, C=DE
> 361|SERVORCH-BisGrid |dgkg0017:dgls0012|user
> | |CN=Georg Birkenheuer, OU=PCPC, OU=Universitaet
> Paderborn, O=GridGermany, C=DE
> [birke@unicore6-bisgrid xuudb]$ bin/admin.sh list | grep servorch
> 354|SERVORCH-BisGrid |leweber |user |
> |CN=servorch.unicore6-bisgrid.uni-paderborn.de, OU=PCPC, OU=Universitaet
> Paderborn, O=GridGermany, C=DE
> 355|WORKFLOW-BisGrid |leweber |user |
> |CN=servorch.unicore6-bisgrid.uni-paderborn.de, OU=PCPC, OU=Universitaet
> Paderborn, O=GridGermany, C=DE
> 356|bisgrid |leweber |user |
> |CN=servorch.unicore6-bisgrid.uni-paderborn.de, OU=PCPC, OU=Universitaet
> Paderborn, O=GridGermany, C=DE
>
> bisgrid is the GCID of the unicorex njs, SERVORCH-BisGrid and
> WORKFLOW-BisGrid are the GCIDs of the workflow services.
>
>
>> Also, could you post the XUUDB related settings from the conf/uas.config
>> file of your workflow engine?
>>
> ##
>
> ##
> ## Configuration file for the Workflow server
> ##
>
> ##########################################################################
> ################## General settings ######################################
> ##########################################################################
>
> #
> # WSRFlite configuration file
> #
> # (contains SSL settings, list of deployed services, etc)
>
>
>
> #
> # WSRFlite configuration file
> # (contains security settings, service declarations, ...)
> uas.wsrflite.configfile=conf/wsrflite.xml
>
> #
> # site name
> #
> uas.targetsystem.sitename=WORKFLOW-BisGrid
>
>
> #
> # data directory for the tracer database
> #
> c9m.tracer.dbdir=data
>
>
> ##########################################################################
> ################## Registry settings #####################################
> ##########################################################################
>
> #
> # is this server a shared registry?
> #
> uas.registry.global=false
>
> #
> # publish entries in an external registry?
> #
> uas.externalregistry.use=true
>
> #
> # if publishing entries in an external registry,
> # try to find external registry via udp multicast?
> #
> uas.externalregistry.autodiscover=false
>
>
> #
> # if publishing entries in an external registry,
> # manually provide url(s) of the external registry
> # in case autodiscovery is switched off or fails
> #
>
> # url:
> uas.externalregistry.url=https://unicore6-bisgrid.uni-paderborn.de:8080/REGISTRY/services/Registry?res=default_registry
>
> ##########################################################################
> ################## Startup behaviour #####################################
> ##########################################################################
>
> #
> # Gateway registration settings
> #
> # set to "true" to enable auto-registration
> uas.gatewayregistration=false
> # interval in seconds for refreshing the registration
> uas.gatewayregistration.updateinterval=60
>
> #
> # runnables to be executed on startup
> #
> uas.onstartup=org.chemomentum.dsws.util.SetupWorkflowService \
> org.chemomentum.tracer.InitTracer \
> org.chemomentum.simpleworkflow.Startup \
> org.chemomentum.dataManagement.locationManager.PublishLM
>
> ##########################################################################
> ################## Workflow system configuration #########################
> ##########################################################################
>
>
> # metadata store class (for use with Chemomentum datamanagement system)
> #c9m.data.metadatastore.class=org.chemomentum.dataManagement.client.util.StoreWorkflowMetadata
>
> # switch off resubmission?
> unicore.workflow.resubmit.disable=false
>
>
>
> ##########################################################################
> ################## Security and authorisation ############################
> ##########################################################################
>
> #
> # access control / authorisation
> #
> uas.security.accesscontrol=true
> uas.security.accesscontrol.pdp.config=conf/xacml.config
> uas.security.accesscontrol.pdp=de.fzj.unicore.uas.security.SimplePDP
>
> #
> # Require digital signatures on important messages
> #
> uas.security.signatures=true
>
>
> #use XUUDB
> uas.security.authoriser=de.fzj.unicore.uas.security.XUUDBAuthoriser
>
> # host/port of XUUDB
> xuudb_http_host=https://unicore6-bisgrid.uni-paderborn.de
> xuudb_http_port=34463
> # Grid component ID used when querying XUUDB
> #uudb_gcid=bisgrid
> uudb_gcid=WORKFLOW-BisGrid
>
>
>> It should look somewhat similar to this:
>>
>> #
>> # Authoriser settings
>> #
>>
>> #use XUUDB
>> uas.security.authoriser=de.fzj.unicore.uas.security.XUUDBAuthoriser
>>
>> # host/port of XUUDB
>> xuudb_http_host=...
>> xuudb_http_port=...
>> # Grid component ID used when querying XUUDB
>> xuudb_gcid=...
>>
>> Having this information, I should be able to assist you further.
>>
> Here follows more detailed logs from the workflow and xuudb system.
>
> xuudb log:
> 2009-11-25 14:11:18,277 [7598296@qtp-10127976-2] DEBUG SecurityToken -
> Cannot create an instance of X500Name from:
> 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

> Trying to get an instance of X509Certificate and then extract the DN...
> 2009-11-25 14:11:18,277 [7598296@qtp-10127976-2] DEBUG Database -
> org.hsqldb.jdbc.jdbcPreparedStatement@1d27069[sql=[SELECT * FROM uudb
> WHERE gcid = ? AND token = ?], parameters=[[bisgrid], [CN=Georg
> Birkenheuer,OU=PCPC,OU=Universitaet Paderborn,O=GridGermany,C=DE]]]
> 2009-11-25 14:11:18,278 [7598296@qtp-10127976-2] INFO Database - XUUDB
> has a matching entry: xlogin = dgkg0017:dgls0012
>
> parameters=[[bisgrid] seems to be the GCID forom the unicorex and
>
> 2009-11-25 14:11:18,044 [7598296@qtp-10127976-2] DEBUG SecurityToken -
> Creating Security token for dn database
> 2009-11-25 14:11:18,044 [7598296@qtp-10127976-2] DEBUG SecurityToken -
> Cannot create an instance of X500Name from:
> 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

> Trying to get an instance of X509Certificate and then extract the DN...
> 2009-11-25 14:11:18,045 [7598296@qtp-10127976-2] DEBUG Database -
> org.hsqldb.jdbc.jdbcPreparedStatement@1d27069[sql=[SELECT * FROM uudb
> WHERE gcid = ? AND token = ?], parameters=[[null], [CN=Georg
> Birkenheuer,OU=PCPC,OU=Universitaet Paderborn,O=GridGermany,C=DE]]]
> 2009-11-25 14:11:18,046 [7598296@qtp-10127976-2] DEBUG Database - No
> matching entry found in UUDB for DN: CN=Georg Birkenheuer, OU=PCPC,
> OU=Universitaet Paderborn, O=GridGermany, C=DE
> 2009-11-25 14:11:18,046 [7598296@qtp-10127976-2] DEBUG HandlerPipeline
> - Invoking handler
> org.codehaus.xfire.service.binding.PostInvocationHandler in phase service
> 2009-11-25 14:11:18,046 [7598296@qtp-10127976-2] DEBUG HandlerPipeline
> - Invoking phase post-invoke
>
> where the GCID seems to be missing (parameters=[[null])... Somehow it
> seems that the workflows syste, misses to provide the GCID correctly,
>
>
> Workflow log:
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> content - >> "<soap:Envelope
> xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
> xmlns:xsd="http://www.w3.org/2001/XMLSchema"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><soap:Body><CheckCertificate
> xmlns="http://www.fz-juelich.de/unicore/xuudb"><gcID xsi:nil="true"
> /><CertInPEM>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

wKgYDVR0gBCMwITARBg8rBgEEAYGtIYIsAQEDAQQwDAYKKoZIhvdMBQICATCBwQYDVR0fBIG5MIG2MFmgV6BVhlNodHRwOi8vY2RwMS5wY2EuZGZuLmRlL2Rmbi1wa2kvY2VydGlmaWNhdGlvbi94NTA5L2dyaWQvZzEvZGF0YS9jcmxzL3Jvb3QtY2EtY3JsLmNybDBZoFegVYZTaHR0cDovL2NkcDIucGNhLmRmbi5kZS9kZm4tcGtpL2NlcnRpZmljYXRpb24veDUwOS9ncmlkL2cxL2RhdGEvY3Jscy9yb290LWNhLWNybC5jcmwwgdYGCCsGAQUFBwEBBIHJMIHGMGEGCCsGAQUFBzAChlVodHRwOi8vY2RwMS5wY2EuZGZuLmRlL2Rmbi1wa2kvY2VydGlmaWNhdGlvbi94NTA5L2dyaWQvZzEvZGF0YS9jZXJ0cy9yb290LWNhLWNlcnQuY3J0MGEGCCsGAQUFBzAChlVodHRwOi8vY2RwMi5wY2EuZGZuLmRlL2Rmbi1wa2kvY2VydGlmaWNhdGlvbi94NTA5L2dyaWQvZzEvZGF0YS9jZXJ0cy9yb290LWNhLWNlcnQuY3J0MA0GCSqGSIb3DQEBBQUAA4IBAQAdIZ/FprAiTbiturYdyreAJM7DPtP0D0yx02LaNb9PeQhMLKEGCKGmordON8pQn4yf7Js3JE6R8rZabnli5M7vFqMuhHeY3ljooqW/9bVEW1UmfQK2RWLXxQOjri80SruIm9mTO6Pp705zeaPfiS1z61IPBpItSFnCyesNQtsAt9fC4JJFCdxOoTckfEhKdCxCz6hxb7ue04a/3gwW7GnDkS7sPIhJsIaSNNb1OA3wZrGv2c4YYwO3QKU6IdVESD/8Bu5e1gsmsF04CYB91mUpmZzLbzZi29K4s+PAip/eNp5bNlPOTCijGCht+sUbDF1IL+aTLPtKi2bKtsisvWVn</CertInPEM><
/CheckCertificate></soap:Body></soap:Envelope>"

> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> EntityEnclosingMethod - Request body sent
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpConnection - enter HttpConnection.flushRequestOutputStream()
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpMethodBase - enter HttpMethodBase.readResponse(HttpState,
> HttpConnection)
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpMethodBase - enter HttpMethodBase.readStatusLine(HttpState,
> HttpConnection)
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpConnection - enter HttpConnection.readLine()
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpParser - enter HttpParser.readLine(InputStream, String)
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpParser - enter HttpParser.readRawLine()
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG header
> - << "HTTP/1.1 200 OK[\r][\n]"
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG header
> - << "HTTP/1.1 200 OK[\r][\n]"
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpMethodBase - enter
> HttpMethodBase.readResponseHeaders(HttpState,HttpConnection)
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpConnection - enter HttpConnection.getResponseInputStream()
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpParser - enter HeaderParser.parseHeaders(InputStream, String)
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpParser - enter HttpParser.readLine(InputStream, String)
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpParser - enter HttpParser.readRawLine()
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG header
> - << "Content-Type: text/xml; charset=utf-8[\r][\n]"
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpParser - enter HttpParser.readLine(InputStream, String)
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpParser - enter HttpParser.readRawLine()
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG header
> - << "Connection: close[\r][\n]"
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpParser - enter HttpParser.readLine(InputStream, String)
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpParser - enter HttpParser.readRawLine()
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG header
> - << "Server: Jetty(6.1.15)[\r][\n]"
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpParser - enter HttpParser.readLine(InputStream, String)
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpParser - enter HttpParser.readRawLine()
> 2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG header
> - << "[\r][\n]"
> 2009-11-25 14:11:18,053 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpMethodBase - enter HttpMethodBase.processResponseHeaders(HttpState,
> HttpConnection)
> 2009-11-25 14:11:18,053 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpMethodBase - enter HttpMethodBase.processCookieHeaders(Header[],
> HttpState, HttpConnection)
> 2009-11-25 14:11:18,053 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpMethodBase - enter HttpMethodBase.readResponseBody(HttpState,
> HttpConnection)
> 2009-11-25 14:11:18,053 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpMethodBase - enter HttpMethodBase.readResponseBody(HttpConnection)
> 2009-11-25 14:11:18,053 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpConnection - enter HttpConnection.getResponseInputStream()
> 2009-11-25 14:11:18,053 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpMethodBase - enter HttpMethodBase.canResponseHaveBody(int)
> 2009-11-25 14:11:18,053 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> content - << "<soap:Envelope
> xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
> xmlns:xsd="http://www.w3.org/2001/XMLSchema"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><soap:Body><checkCertificateResponse
> xmlns="http://www.fz-juelich.de/unicore/xuudb"
> /></soap:Body></soap:Envelope>"
> 2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpMethodBase - Should close connection in response to directive: close
> 2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpConnection - enter HttpConnection.close()
> 2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpConnection - enter HttpConnection.closeSockedAndStreams()
> 2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpConnection - enter HttpConnection.releaseConnection()
> 2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> HttpConnection - Releasing connection back to connection manager.
> 2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> MultiThreadedHttpConnectionManager - enter
> HttpConnectionManager.releaseConnection(HttpConnection)
> 2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> MultiThreadedHttpConnectionManager - Freeing connection,
> hostConfig=HostConfiguration[host=https://unicore6-bisgrid.uni-paderborn.de:34463]
> 2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> MultiThreadedHttpConnectionManager - enter
> HttpConnectionManager.ConnectionPool.getHostPool(HostConfiguration)
> 2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> IdleConnectionHandler - Adding connection at: 1259154678054
> 2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> MultiThreadedHttpConnectionManager - Notifying no-one, there are no
> waiting threads
> 2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> ReliableProxy - Result [<checkCertificateResponse
> xmlns="http://www.fz-juelich.de/unicore/xuudb"
> xmlns:xsd="http://www.w3.org/2001/XMLSchema"
> xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"/>]
> 2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG UAS -
> Check
> <http://docs.oasis-open.org/wsrf/rpw-2/GetResourcePropertyDocument/GetResourcePropertyDocumentRequest>
> = false
> 2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] INFO
> SecurityManager - Access denied for CN=Georg Birkenheuer, OU=PCPC,
> OU=Universitaet Paderborn, O=GridGermany, C=DE on resource
> WorkflowFactory[default_workflow_submission][owner:
> CN=workflow.unicore6-bisgrid.uni-paderborn.de,OU=PCPC,OU=Universitaet
> Paderborn,O=GridGermany,C=DE]
> 2009-11-25 14:11:18,055 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] ERROR
> DefaultFaultHandler - Fault occurred!
> de.fzj.unicore.uas.security.AuthorisationException: Access denied for
> CN=Georg Birkenheuer, OU=PCPC, OU=Universitaet Paderborn, O=GridGermany,
> C=DE on resource WorkflowFactory[default_workflow_submission][owner:
> CN=workflow.unicore6-bisgrid.uni-paderborn.de,OU=PCPC,OU=Universitaet
> Paderborn,O=GridGermany,C=DE]
> at
> de.fzj.unicore.uas.security.SecurityManager.checkAuthorisation(SecurityManager.java:510)
> at
> de.fzj.unicore.uas.security.AccessControl.checkAccess(AccessControl.java:192)
> at
> de.fzj.unicore.wsrflite.xfire.WSRFInvoker.getServiceObject(WSRFInvoker.java:144)
> at
> org.codehaus.xfire.service.invoker.AbstractInvoker.invoke(AbstractInvoker.java:29)
> at
> de.fzj.unicore.wsrflite.xfire.WSRFInvoker.invoke(WSRFInvoker.java:173)
> at
> org.codehaus.xfire.service.binding.ServiceInvocationHandler.sendMessage(ServiceInvocationHandler.java:320)
> at
> org.codehaus.xfire.service.binding.ServiceInvocationHandler$1.run(ServiceInvocationHandler.java:86)
> at
> org.codehaus.xfire.service.binding.ServiceInvocationHandler.execute(ServiceInvocationHandler.java:134)
> at
> org.codehaus.xfire.service.binding.ServiceInvocationHandler.invoke(ServiceInvocationHandler.java:109)
> at
> org.codehaus.xfire.handler.HandlerPipeline.invoke(HandlerPipeline.java:131)
> at
> org.codehaus.xfire.transport.DefaultEndpoint.onReceive(DefaultEndpoint.java:64)
> at
> org.codehaus.xfire.transport.AbstractChannel.receive(AbstractChannel.java:38)
> at
> org.codehaus.xfire.transport.http.XFireServletController.invoke(XFireServletController.java:304)
> at
> org.codehaus.xfire.transport.http.XFireServletController.doService(XFireServletController.java:129)
> at
> org.codehaus.xfire.transport.http.XFireServlet.doPost(XFireServlet.java:116)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
> at
> org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:502)
> at
> org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:389)
> at
> org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181)
> at
> org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)
> at
> org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
> at org.mortbay.jetty.Server.handle(Server.java:322)
> at
> org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:534)
> at
> org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:879)
> at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:834)
> at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:212)
> at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
> at
> org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228)
> at
> org.mortbay.jetty.security.SslSocketConnector$SslConnection.run(SslSocketConnector.java:636)
> at
> org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:520)
> 2009-11-25 14:11:18,057 [21126679@qtp-7718724-5 -
> /services/WorkflowFactory?res=default_workflow_submission] DEBUG
> JettyLogger - RESPONSE /services/WorkflowFactory 500
> 2009-11-25 14:11:18,600 [wsrflite-sched-3] DEBUG ExpiryChecker -
> Checking <Registry>default_registry TT = Sun Nov 25 13:24:21 CET 2012
> 2009-11-25 14:11:20,943 [pool-2-thread-1] DEBUG ComponentFinder -
> Trying to find components in Registry entries...
> 2009-11-25 14:11:20,943 [pool-2-thread-1] DEBUG RegistryCrawler -
> Searching for instances of type: TracerService
> 2009-11-25 14:11:20,943 [pool-2-thread-1] DEBUG ReliableProxy - Method
> [QueryResourceProperties] [<QueryResourceProperties
> xmlns="http://docs.oasis-open.org/wsrf/rp-2">
> <QueryExpression
> Dialect="http://www.w3.org/TR/1999/REC-xpath-19991116">declare namespace
> sg='http://docs.oasis-open.org/wsrf/sg-2' ;
> declare namespace add='http://www.w3.org/2005/08/addressing';
> declare namespace meta='http://www.w3.org/2005/08/addressing/metadata';
> .//sg:ServiceGroupRP/sg:Entry/sg:MemberServiceEPR/add:Metadata/meta:InterfaceName[matches(.,'TracerService[
> .*]?$')]/ancestor::sg:Entry</QueryExpression>
> </QueryResourceProperties>]
>
>
> Cheers,
> Georg
>
>
> .
>
>

------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: problem with UNICORE6 workflow service

2009-11-25T05:18:48Z

Hi Bastian,

Bastian Demuth schrieb:
>
> Could you provide the output of a
> bin/admin.sh list
> command from your XUUDB?
[birke@unicore6-bisgrid xuudb]$ bin/admin.sh list | grep Birken
252|bisgrid |dgkg0017:dgls0012|user
|kerndgrid:lifescience|CN=Georg Birkenheuer, OU=PCPC, OU=Universitaet
Paderborn, O=GridGermany, C=DE
360|WORKFLOW-BisGrid |dgkg0017:dgls0012|user
| |CN=Georg Birkenheuer, OU=PCPC, OU=Universitaet
Paderborn, O=GridGermany, C=DE
361|SERVORCH-BisGrid |dgkg0017:dgls0012|user
| |CN=Georg Birkenheuer, OU=PCPC, OU=Universitaet
Paderborn, O=GridGermany, C=DE
[birke@unicore6-bisgrid xuudb]$ bin/admin.sh list | grep servorch
354|SERVORCH-BisGrid |leweber |user |
|CN=servorch.unicore6-bisgrid.uni-paderborn.de, OU=PCPC, OU=Universitaet
Paderborn, O=GridGermany, C=DE
355|WORKFLOW-BisGrid |leweber |user |
|CN=servorch.unicore6-bisgrid.uni-paderborn.de, OU=PCPC, OU=Universitaet
Paderborn, O=GridGermany, C=DE
356|bisgrid |leweber |user |
|CN=servorch.unicore6-bisgrid.uni-paderborn.de, OU=PCPC, OU=Universitaet
Paderborn, O=GridGermany, C=DE

bisgrid is the GCID of the unicorex njs, SERVORCH-BisGrid and
WORKFLOW-BisGrid are the GCIDs of the workflow services.

> Also, could you post the XUUDB related settings from the conf/uas.config
> file of your workflow engine?
##

##
## Configuration file for the Workflow server
##

##########################################################################
################## General settings ######################################
##########################################################################

#
# WSRFlite configuration file
#
# (contains SSL settings, list of deployed services, etc)

#
# WSRFlite configuration file
# (contains security settings, service declarations, ...)
uas.wsrflite.configfile=conf/wsrflite.xml

#
# site name
#
uas.targetsystem.sitename=WORKFLOW-BisGrid

#
# data directory for the tracer database
#
c9m.tracer.dbdir=data

##########################################################################
################## Registry settings #####################################
##########################################################################

#
# is this server a shared registry?
#
uas.registry.global=false

#
# publish entries in an external registry?
#
uas.externalregistry.use=true

#
# if publishing entries in an external registry,
# try to find external registry via udp multicast?
#
uas.externalregistry.autodiscover=false

#
# if publishing entries in an external registry,
# manually provide url(s) of the external registry
# in case autodiscovery is switched off or fails
#

# url:
uas.externalregistry.url=https://unicore6-bisgrid.uni-paderborn.de:8080/REGISTRY/services/Registry?res=default_registry

##########################################################################
################## Startup behaviour #####################################
##########################################################################

#
# Gateway registration settings
#
# set to "true" to enable auto-registration
uas.gatewayregistration=false
# interval in seconds for refreshing the registration
uas.gatewayregistration.updateinterval=60

#
# runnables to be executed on startup
#
uas.onstartup=org.chemomentum.dsws.util.SetupWorkflowService \
org.chemomentum.tracer.InitTracer \
org.chemomentum.simpleworkflow.Startup \
org.chemomentum.dataManagement.locationManager.PublishLM

##########################################################################
################## Workflow system configuration #########################
##########################################################################

# metadata store class (for use with Chemomentum datamanagement system)
#c9m.data.metadatastore.class=org.chemomentum.dataManagement.client.util.StoreWorkflowMetadata

# switch off resubmission?
unicore.workflow.resubmit.disable=false

##########################################################################
################## Security and authorisation ############################
##########################################################################

#
# access control / authorisation
#
uas.security.accesscontrol=true
uas.security.accesscontrol.pdp.config=conf/xacml.config
uas.security.accesscontrol.pdp=de.fzj.unicore.uas.security.SimplePDP

#
# Require digital signatures on important messages
#
uas.security.signatures=true

#use XUUDB
uas.security.authoriser=de.fzj.unicore.uas.security.XUUDBAuthoriser

# host/port of XUUDB
xuudb_http_host=https://unicore6-bisgrid.uni-paderborn.de
xuudb_http_port=34463
# Grid component ID used when querying XUUDB
#uudb_gcid=bisgrid
uudb_gcid=WORKFLOW-BisGrid

> It should look somewhat similar to this:
>
> #
> # Authoriser settings
> #
>
> #use XUUDB
> uas.security.authoriser=de.fzj.unicore.uas.security.XUUDBAuthoriser
>
> # host/port of XUUDB
> xuudb_http_host=...
> xuudb_http_port=...
> # Grid component ID used when querying XUUDB
> xuudb_gcid=...
>
> Having this information, I should be able to assist you further.

Here follows more detailed logs from the workflow and xuudb system.

xuudb log:
2009-11-25 14:11:18,277 [7598296@qtp-10127976-2] DEBUG SecurityToken -
Cannot create an instance of X500Name from:
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
Trying to get an instance of X509Certificate and then extract the DN...
2009-11-25 14:11:18,277 [7598296@qtp-10127976-2] DEBUG Database -
org.hsqldb.jdbc.jdbcPreparedStatement@1d27069[sql=[SELECT * FROM uudb
WHERE gcid = ? AND token = ?], parameters=[[bisgrid], [CN=Georg
Birkenheuer,OU=PCPC,OU=Universitaet Paderborn,O=GridGermany,C=DE]]]
2009-11-25 14:11:18,278 [7598296@qtp-10127976-2] INFO Database - XUUDB
has a matching entry: xlogin = dgkg0017:dgls0012

parameters=[[bisgrid] seems to be the GCID forom the unicorex and

2009-11-25 14:11:18,044 [7598296@qtp-10127976-2] DEBUG SecurityToken -
Creating Security token for dn database
2009-11-25 14:11:18,044 [7598296@qtp-10127976-2] DEBUG SecurityToken -
Cannot create an instance of X500Name from:
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
Trying to get an instance of X509Certificate and then extract the DN...
2009-11-25 14:11:18,045 [7598296@qtp-10127976-2] DEBUG Database -
org.hsqldb.jdbc.jdbcPreparedStatement@1d27069[sql=[SELECT * FROM uudb
WHERE gcid = ? AND token = ?], parameters=[[null], [CN=Georg
Birkenheuer,OU=PCPC,OU=Universitaet Paderborn,O=GridGermany,C=DE]]]
2009-11-25 14:11:18,046 [7598296@qtp-10127976-2] DEBUG Database - No
matching entry found in UUDB for DN: CN=Georg Birkenheuer, OU=PCPC,
OU=Universitaet Paderborn, O=GridGermany, C=DE
2009-11-25 14:11:18,046 [7598296@qtp-10127976-2] DEBUG HandlerPipeline
- Invoking handler
org.codehaus.xfire.service.binding.PostInvocationHandler in phase service
2009-11-25 14:11:18,046 [7598296@qtp-10127976-2] DEBUG HandlerPipeline
- Invoking phase post-invoke

where the GCID seems to be missing (parameters=[[null])... Somehow it
seems that the workflows syste, misses to provide the GCID correctly,

Workflow log:
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
content - >> "<soap:Envelope
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><soap:Body><CheckCertificate
xmlns="http://www.fz-juelich.de/unicore/xuudb"><gcID xsi:nil="true"
/><CertInPEM>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</CertInPEM></CheckCertificate></soap:Body></soap:Envelope>"
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
EntityEnclosingMethod - Request body sent
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpConnection - enter HttpConnection.flushRequestOutputStream()
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpMethodBase - enter HttpMethodBase.readResponse(HttpState,
HttpConnection)
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpMethodBase - enter HttpMethodBase.readStatusLine(HttpState,
HttpConnection)
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpConnection - enter HttpConnection.readLine()
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpParser - enter HttpParser.readLine(InputStream, String)
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpParser - enter HttpParser.readRawLine()
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG header
- << "HTTP/1.1 200 OK[\r][\n]"
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG header
- << "HTTP/1.1 200 OK[\r][\n]"
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpMethodBase - enter
HttpMethodBase.readResponseHeaders(HttpState,HttpConnection)
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpConnection - enter HttpConnection.getResponseInputStream()
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpParser - enter HeaderParser.parseHeaders(InputStream, String)
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpParser - enter HttpParser.readLine(InputStream, String)
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpParser - enter HttpParser.readRawLine()
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG header
- << "Content-Type: text/xml; charset=utf-8[\r][\n]"
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpParser - enter HttpParser.readLine(InputStream, String)
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpParser - enter HttpParser.readRawLine()
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG header
- << "Connection: close[\r][\n]"
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpParser - enter HttpParser.readLine(InputStream, String)
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpParser - enter HttpParser.readRawLine()
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG header
- << "Server: Jetty(6.1.15)[\r][\n]"
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpParser - enter HttpParser.readLine(InputStream, String)
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpParser - enter HttpParser.readRawLine()
2009-11-25 14:11:18,052 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG header
- << "[\r][\n]"
2009-11-25 14:11:18,053 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpMethodBase - enter HttpMethodBase.processResponseHeaders(HttpState,
HttpConnection)
2009-11-25 14:11:18,053 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpMethodBase - enter HttpMethodBase.processCookieHeaders(Header[],
HttpState, HttpConnection)
2009-11-25 14:11:18,053 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpMethodBase - enter HttpMethodBase.readResponseBody(HttpState,
HttpConnection)
2009-11-25 14:11:18,053 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpMethodBase - enter HttpMethodBase.readResponseBody(HttpConnection)
2009-11-25 14:11:18,053 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpConnection - enter HttpConnection.getResponseInputStream()
2009-11-25 14:11:18,053 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpMethodBase - enter HttpMethodBase.canResponseHaveBody(int)
2009-11-25 14:11:18,053 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
content - << "<soap:Envelope
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><soap:Body><checkCertificateResponse
xmlns="http://www.fz-juelich.de/unicore/xuudb"
/></soap:Body></soap:Envelope>"
2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpMethodBase - Should close connection in response to directive: close
2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpConnection - enter HttpConnection.close()
2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpConnection - enter HttpConnection.closeSockedAndStreams()
2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpConnection - enter HttpConnection.releaseConnection()
2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
HttpConnection - Releasing connection back to connection manager.
2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
MultiThreadedHttpConnectionManager - enter
HttpConnectionManager.releaseConnection(HttpConnection)
2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
MultiThreadedHttpConnectionManager - Freeing connection,
hostConfig=HostConfiguration[host=https://unicore6-bisgrid.uni-paderborn.de:34463]
2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
MultiThreadedHttpConnectionManager - enter
HttpConnectionManager.ConnectionPool.getHostPool(HostConfiguration)
2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
IdleConnectionHandler - Adding connection at: 1259154678054
2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
MultiThreadedHttpConnectionManager - Notifying no-one, there are no
waiting threads
2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
ReliableProxy - Result [<checkCertificateResponse
xmlns="http://www.fz-juelich.de/unicore/xuudb"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"/>]
2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG UAS -
Check
<http://docs.oasis-open.org/wsrf/rpw-2/GetResourcePropertyDocument/GetResourcePropertyDocumentRequest>
= false
2009-11-25 14:11:18,054 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] INFO
SecurityManager - Access denied for CN=Georg Birkenheuer, OU=PCPC,
OU=Universitaet Paderborn, O=GridGermany, C=DE on resource
WorkflowFactory[default_workflow_submission][owner:
CN=workflow.unicore6-bisgrid.uni-paderborn.de,OU=PCPC,OU=Universitaet
Paderborn,O=GridGermany,C=DE]
2009-11-25 14:11:18,055 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] ERROR
DefaultFaultHandler - Fault occurred!
de.fzj.unicore.uas.security.AuthorisationException: Access denied for
CN=Georg Birkenheuer, OU=PCPC, OU=Universitaet Paderborn, O=GridGermany,
C=DE on resource WorkflowFactory[default_workflow_submission][owner:
CN=workflow.unicore6-bisgrid.uni-paderborn.de,OU=PCPC,OU=Universitaet
Paderborn,O=GridGermany,C=DE]
at
de.fzj.unicore.uas.security.SecurityManager.checkAuthorisation(SecurityManager.java:510)
at
de.fzj.unicore.uas.security.AccessControl.checkAccess(AccessControl.java:192)
at
de.fzj.unicore.wsrflite.xfire.WSRFInvoker.getServiceObject(WSRFInvoker.java:144)
at
org.codehaus.xfire.service.invoker.AbstractInvoker.invoke(AbstractInvoker.java:29)
at
de.fzj.unicore.wsrflite.xfire.WSRFInvoker.invoke(WSRFInvoker.java:173)
at
org.codehaus.xfire.service.binding.ServiceInvocationHandler.sendMessage(ServiceInvocationHandler.java:320)
at
org.codehaus.xfire.service.binding.ServiceInvocationHandler$1.run(ServiceInvocationHandler.java:86)
at
org.codehaus.xfire.service.binding.ServiceInvocationHandler.execute(ServiceInvocationHandler.java:134)
at
org.codehaus.xfire.service.binding.ServiceInvocationHandler.invoke(ServiceInvocationHandler.java:109)
at
org.codehaus.xfire.handler.HandlerPipeline.invoke(HandlerPipeline.java:131)
at
org.codehaus.xfire.transport.DefaultEndpoint.onReceive(DefaultEndpoint.java:64)
at
org.codehaus.xfire.transport.AbstractChannel.receive(AbstractChannel.java:38)
at
org.codehaus.xfire.transport.http.XFireServletController.invoke(XFireServletController.java:304)
at
org.codehaus.xfire.transport.http.XFireServletController.doService(XFireServletController.java:129)
at
org.codehaus.xfire.transport.http.XFireServlet.doPost(XFireServlet.java:116)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at
org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:502)
at
org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:389)
at
org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181)
at
org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)
at
org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
at org.mortbay.jetty.Server.handle(Server.java:322)
at
org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:534)
at
org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:879)
at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:834)
at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:212)
at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
at
org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228)
at
org.mortbay.jetty.security.SslSocketConnector$SslConnection.run(SslSocketConnector.java:636)
at
org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:520)
2009-11-25 14:11:18,057 [21126679@qtp-7718724-5 -
/services/WorkflowFactory?res=default_workflow_submission] DEBUG
JettyLogger - RESPONSE /services/WorkflowFactory 500
2009-11-25 14:11:18,600 [wsrflite-sched-3] DEBUG ExpiryChecker -
Checking <Registry>default_registry TT = Sun Nov 25 13:24:21 CET 2012
2009-11-25 14:11:20,943 [pool-2-thread-1] DEBUG ComponentFinder -
Trying to find components in Registry entries...
2009-11-25 14:11:20,943 [pool-2-thread-1] DEBUG RegistryCrawler -
Searching for instances of type: TracerService
2009-11-25 14:11:20,943 [pool-2-thread-1] DEBUG ReliableProxy - Method
[QueryResourceProperties] [<QueryResourceProperties
xmlns="http://docs.oasis-open.org/wsrf/rp-2">
<QueryExpression
Dialect="http://www.w3.org/TR/1999/REC-xpath-19991116">declare namespace
sg='http://docs.oasis-open.org/wsrf/sg-2' ;
declare namespace add='http://www.w3.org/2005/08/addressing';
declare namespace meta='http://www.w3.org/2005/08/addressing/metadata';
.//sg:ServiceGroupRP/sg:Entry/sg:MemberServiceEPR/add:Metadata/meta:InterfaceName[matches(.,'TracerService[
.*]?$')]/ancestor::sg:Entry</QueryExpression>
</QueryResourceProperties>]

Cheers,
Georg

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: problem with UNICORE6 workflow service

2009-11-25T02:31:41Z

Hi Georg,

well, the XUUDB configuration of the workflow engine or the content of
the XUUDB seem to cause the problem. From the server.log I can see that
your XUUDB settings for UNICORE/X is correct :
2009-11-24 16:44:20,252 [17010151@qtp-10127976-0] INFO Database -
XUUDB has a matching entry: xlogin = leweber

Could you provide the output of a
bin/admin.sh list
command from your XUUDB?
Also, could you post the XUUDB related settings from the conf/uas.config
file of your workflow engine?
It should look somewhat similar to this:

#
# Authoriser settings
#

#use XUUDB
uas.security.authoriser=de.fzj.unicore.uas.security.XUUDBAuthoriser

# host/port of XUUDB
xuudb_http_host=...
xuudb_http_port=...
# Grid component ID used when querying XUUDB
xuudb_gcid=...

Having this information, I should be able to assist you further.

Cheers,
Bastian

Georg Birkenheuer wrote:

> Hello,
> I have a problem with the connection to the UNICROE workflow service.
>
> The workflow log entry below is written in the registry during refresh
> in the client.
>
> The workflow log entry is:
> 2009-11-24 16:44:24,161 [23940670@qtp-2884607-1] ERROR
> DefaultFaultHandler - Fault occurred!
> de.fzj.unicore.uas.security.AuthorisationException: Access denied for
> CN=Georg Birkenheuer, OU=PCPC, OU=Universitaet Paderborn, O=GridGermany,
> C=DE on resource WorkflowFactory[default_workflow_submission][owner:
> CN=workflow.unicore6-bisgrid.uni-paderborn.de,OU=PCPC,OU=Universitaet
> Paderborn,O=GridGermany,C=DE]
> at
> de.fzj.unicore.uas.security.SecurityManager.checkAuthorisation(SecurityManager.java:510)
> at
> de.fzj.unicore.uas.security.AccessControl.checkAccess(AccessControl.java:192)
> at
> de.fzj.unicore.wsrflite.xfire.WSRFInvoker.getServiceObject(WSRFInvoker.java:144)
> at
> org.codehaus.xfire.service.invoker.AbstractInvoker.invoke(AbstractInvoker.java:29)
> at
> de.fzj.unicore.wsrflite.xfire.WSRFInvoker.invoke(WSRFInvoker.java:173)
> at
> org.codehaus.xfire.service.binding.ServiceInvocationHandler.sendMessage(ServiceInvocationHandler.java:320)
> at
> org.codehaus.xfire.service.binding.ServiceInvocationHandler$1.run(ServiceInvocationHandler.java:86)
> at
> org.codehaus.xfire.service.binding.ServiceInvocationHandler.execute(ServiceInvocationHandler.java:134)
> at
> org.codehaus.xfire.service.binding.ServiceInvocationHandler.invoke(ServiceInvocationHandler.java:109)
> at
> org.codehaus.xfire.handler.HandlerPipeline.invoke(HandlerPipeline.java:131)
> at
> org.codehaus.xfire.transport.DefaultEndpoint.onReceive(DefaultEndpoint.java:64)
> at
> org.codehaus.xfire.transport.AbstractChannel.receive(AbstractChannel.java:38)
> at
> org.codehaus.xfire.transport.http.XFireServletController.invoke(XFireServletController.java:304)
> at
> org.codehaus.xfire.transport.http.XFireServletController.doService(XFireServletController.java:129)
> at
> org.codehaus.xfire.transport.http.XFireServlet.doPost(XFireServlet.java:116)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
> at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
> at
> org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:502)
> at
> org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:389)
> at
> org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181)
> at
> org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)
> at
> org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
> at org.mortbay.jetty.Server.handle(Server.java:326)
> at
> org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:534)
> at
> org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:879)
> at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:834)
> at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:212)
> at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
> at
> org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228)
> at
> org.mortbay.jetty.security.SslSocketConnector$SslConnection.run(SslSocketConnector.java:636)
> at
> org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:520)
>
> However the DN is part of the xuudb (I added 3 GCIDs for the xnjs,
> workflow and servorch) and the xuudb has the credentials of the services
> in its keystore?
>
> Does anybody has an idea, what goes wrong?
>
> I have appended the workflow and xuudb log to this mail, as it might help.
>
> Georg Birkenheuer
>
>

problem with UNICORE6 workflow service

2009-11-24T07:53:07Z

Hello,
I have a problem with the connection to the UNICROE workflow service.

The workflow log entry below is written in the registry during refresh
in the client.

The workflow log entry is:
2009-11-24 16:44:24,161 [23940670@qtp-2884607-1] ERROR
DefaultFaultHandler - Fault occurred!
de.fzj.unicore.uas.security.AuthorisationException: Access denied for
CN=Georg Birkenheuer, OU=PCPC, OU=Universitaet Paderborn, O=GridGermany,
C=DE on resource WorkflowFactory[default_workflow_submission][owner:
CN=workflow.unicore6-bisgrid.uni-paderborn.de,OU=PCPC,OU=Universitaet
Paderborn,O=GridGermany,C=DE]
at
de.fzj.unicore.uas.security.SecurityManager.checkAuthorisation(SecurityManager.java:510)
at
de.fzj.unicore.uas.security.AccessControl.checkAccess(AccessControl.java:192)
at
de.fzj.unicore.wsrflite.xfire.WSRFInvoker.getServiceObject(WSRFInvoker.java:144)
at
org.codehaus.xfire.service.invoker.AbstractInvoker.invoke(AbstractInvoker.java:29)
at
de.fzj.unicore.wsrflite.xfire.WSRFInvoker.invoke(WSRFInvoker.java:173)
at
org.codehaus.xfire.service.binding.ServiceInvocationHandler.sendMessage(ServiceInvocationHandler.java:320)
at
org.codehaus.xfire.service.binding.ServiceInvocationHandler$1.run(ServiceInvocationHandler.java:86)
at
org.codehaus.xfire.service.binding.ServiceInvocationHandler.execute(ServiceInvocationHandler.java:134)
at
org.codehaus.xfire.service.binding.ServiceInvocationHandler.invoke(ServiceInvocationHandler.java:109)
at
org.codehaus.xfire.handler.HandlerPipeline.invoke(HandlerPipeline.java:131)
at
org.codehaus.xfire.transport.DefaultEndpoint.onReceive(DefaultEndpoint.java:64)
at
org.codehaus.xfire.transport.AbstractChannel.receive(AbstractChannel.java:38)
at
org.codehaus.xfire.transport.http.XFireServletController.invoke(XFireServletController.java:304)
at
org.codehaus.xfire.transport.http.XFireServletController.doService(XFireServletController.java:129)
at
org.codehaus.xfire.transport.http.XFireServlet.doPost(XFireServlet.java:116)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at
org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:502)
at
org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:389)
at
org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181)
at
org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)
at
org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
at org.mortbay.jetty.Server.handle(Server.java:326)
at
org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:534)
at
org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:879)
at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:834)
at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:212)
at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
at
org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228)
at
org.mortbay.jetty.security.SslSocketConnector$SslConnection.run(SslSocketConnector.java:636)
at
org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:520)

However the DN is part of the xuudb (I added 3 GCIDs for the xnjs,
workflow and servorch) and the xuudb has the credentials of the services
in its keystore?

Does anybody has an idea, what goes wrong?

I have appended the workflow and xuudb log to this mail, as it might help.

Georg Birkenheuer

--
Universität Paderborn Georg Birkenheuer
Paderborn Center for Parallel Computing birke@...,www.upb.de/pc2
Fürstenallee 11 fon : +49-5251-60-6329
33102 Paderborn, Germany fax : +49-5251-60-6297

2009-11-24 16:43:06,501 [main] INFO XUUDB - Loaded Configuration from file: conf/xuudb_server.conf
2009-11-24 16:43:06,503 [main] INFO XUUDB -
2009-11-24 16:43:06,503 [main] INFO XUUDB - ******************************************
2009-11-24 16:43:06,503 [main] INFO XUUDB - * UNICORE AUTHORISATION SERVICE
2009-11-24 16:43:06,503 [main] INFO XUUDB - * Version 1.2.1
2009-11-24 16:43:06,503 [main] INFO XUUDB - * http://www.unicore.eu
2009-11-24 16:43:06,503 [main] INFO XUUDB - ******************************************
2009-11-24 16:43:06,856 [main] INFO DefaultTypeMappingRegistry - Couldn't find Java 5 module on classpath. Annotation mappings will not be supported.
2009-11-24 16:43:07,538 [main] INFO XUUDB - Starting XUUDB
2009-11-24 16:43:07,538 [main] INFO XUUDB - Server version: 1.2.1
2009-11-24 16:43:07,538 [main] INFO XUUDB - Running in DN mode.
2009-11-24 16:43:07,544 [main] INFO Database - Loading Database from file: /opt/UNICORE6/xuudb/data/UnicoreUserDB.data
2009-11-24 16:43:07,546 [main] INFO Database - Connecting to the DB: jdbc:hsqldb:file:/opt/UNICORE6/xuudb/data/UnicoreUserDB.data
2009-11-24 16:43:08,381 [main] INFO Database - Database HSQLDB Started
2009-11-24 16:43:08,385 [main] INFO DefaultTypeMappingRegistry - Couldn't find Java 5 module on classpath. Annotation mappings will not be supported.
2009-11-24 16:43:08,410 [main] INFO XUUDB - Starting XUUDB
2009-11-24 16:43:08,410 [main] INFO XUUDB - Server version: 1.2.1
2009-11-24 16:43:08,410 [main] INFO XUUDB - Running in DN mode.
2009-11-24 16:43:08,411 [main] INFO HttpsServer - Setting up Jetty server in SSL mode.
2009-11-24 16:43:08,415 [main] INFO JettyServer - Starting Jetty on port :34463
2009-11-24 16:43:08,424 [main] INFO JettyServer - Creating SSL connector.
2009-11-24 16:43:08,445 [main] INFO JettyServer - Adding XFire servlet.
2009-11-24 16:43:11,853 [main] INFO MySslSocketConnector - adding MyX509TrustManager
2009-11-24 16:43:11,855 [main] INFO MyX509TrustManager - setting up MyX509TrustManager..
2009-11-24 16:43:11,855 [main] INFO MyX509TrustManager - truststore = java.security.KeyStore@e4245
2009-11-24 16:43:11,855 [main] INFO MyX509TrustManager - truststore has entrys: 7
2009-11-24 16:43:11,857 [main] INFO MyX509TrustManager - adding cert: CN=DFN-Verein PCA Grid - G01, OU=DFN-PKI, O=DFN-Verein, C=DE
2009-11-24 16:43:11,858 [main] INFO MyX509TrustManager - adding cert: CN=GridKa-CA, O=GermanGrid, C=DE
2009-11-24 16:43:11,858 [main] INFO MyX509TrustManager - adding cert: CN=xuudb.unicore6-bisgrid.uni-paderborn.de, OU=PCPC, OU=Universitaet Paderborn, O=GridGermany, C=DE
2009-11-24 16:43:11,858 [main] INFO MyX509TrustManager - adding cert: CN=registry.unicore6-bisgrid.uni-paderborn.de, OU=PCPC, OU=Universitaet Paderborn, O=GridGermany, C=DE
2009-11-24 16:43:11,858 [main] INFO MyX509TrustManager - adding cert: CN=njs.unicore6-bisgrid.uni-paderborn.de, OU=PCPC, OU=Universitaet Paderborn, O=GridGermany, C=DE
2009-11-24 16:43:11,858 [main] INFO MyX509TrustManager - adding cert: CN=servorch.unicore6-bisgrid.uni-paderborn.de, OU=PCPC, OU=Universitaet Paderborn, O=GridGermany, C=DE
2009-11-24 16:43:11,858 [main] INFO MyX509TrustManager - adding cert: CN=workflow.unicore6-bisgrid.uni-paderborn.de, OU=PCPC, OU=Universitaet Paderborn, O=GridGermany, C=DE
2009-11-24 16:43:34,293 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:43:45,559 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:43:58,670 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:44:09,367 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:44:20,252 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:44:24,139 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = dgkg0017:dgls0012
2009-11-24 16:44:24,429 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = dgkg0017:dgls0012
2009-11-24 16:44:30,937 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:44:41,588 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:44:52,612 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:45:03,288 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:45:13,930 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:45:24,839 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:45:35,520 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:45:46,242 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:45:56,885 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:46:07,512 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:46:18,168 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:46:28,898 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:46:39,512 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:46:50,135 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:47:00,767 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:47:11,660 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:47:22,413 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:47:33,107 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:47:43,725 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:47:54,434 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:48:05,042 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:48:15,653 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:48:26,268 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:48:37,066 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:48:47,671 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:48:58,271 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:49:08,864 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:49:19,609 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:49:30,213 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:49:40,809 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:49:51,428 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:50:02,031 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:50:12,620 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:50:23,435 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:50:34,033 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:50:44,809 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:50:55,402 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber
2009-11-24 16:51:06,005 [17010151@qtp-10127976-0] INFO Database - XUUDB has a matching entry: xlogin = leweber

2009-11-24 16:43:16,736 [main] WARN UAS - IMPORTANT! The setting 'uas.security.consignor.checksignature' should be defined in the config file, using default value = false.
2009-11-24 16:43:16,738 [UNICORE/X-Startup] INFO UAS -
_ _ _ _ _____ _____ ____ _____ ______ ___ __
| | | | \ | |_ _/ ____/ __ \| __ \| ____| / \ \ / /
| | | | \| | | || | | | | | |__) | |__ / / \ V /
| | | | . ` | | || | | | | | _ /| __| / / > <
| |__| | |\ |_| |_ |____ |__| | | \ \| |____ / / / . \
\____/|_| \_|_____\_____\____/|_| \_\______/_/ /_/ \_\
Version 1.2.2, http://www.unicore.eu
2009-11-24 16:43:16,966 [UNICORE/X-Startup] INFO Kernel - WSRFlite 1.8.15 (c) Forschungszentrum Juelich 2006-2009
2009-11-24 16:43:17,358 [UNICORE/X-Startup] INFO AdminRuntimeCommandsListener - Admin runtime commands initiated.
2009-11-24 16:43:17,377 [UNICORE/X-Startup] INFO DeploymentManager - Dynamic deployment of Web Services deactivated.
2009-11-24 16:43:17,431 [UNICORE/X-Startup] INFO PersistenceManager - Using 'de.fzj.unicore.wsrflite.persistence.HsqldbPersist' for permanent storage.
2009-11-24 16:43:17,432 [UNICORE/X-Startup] INFO PersistenceManager - Persistence=true
2009-11-24 16:43:17,465 [UNICORE/X-Startup] INFO HsqldbPersist - Connecting to: jdbc:hsqldb:data/WorkflowFactory
2009-11-24 16:43:17,717 [UNICORE/X-Startup] INFO DefaultHome - [WorkflowFactory] Have 0 instances from permanent storage
2009-11-24 16:43:18,022 [UNICORE/X-Startup] INFO PersistenceManager - Persistence=true
2009-11-24 16:43:18,022 [UNICORE/X-Startup] INFO HsqldbPersist - Connecting to: jdbc:hsqldb:data/WorkflowManagement
2009-11-24 16:43:18,431 [UNICORE/X-Startup] INFO DefaultHome - [WorkflowManagement] Have 0 instances from permanent storage
2009-11-24 16:43:18,534 [UNICORE/X-Startup] INFO PersistenceManager - Persistence=true
2009-11-24 16:43:18,534 [UNICORE/X-Startup] INFO HsqldbPersist - Connecting to: jdbc:hsqldb:data/ServiceGroupEntry
2009-11-24 16:43:18,586 [UNICORE/X-Startup] INFO DefaultHome - [ServiceGroupEntry] Have 0 instances from permanent storage
2009-11-24 16:43:18,609 [UNICORE/X-Startup] INFO PersistenceManager - Persistence=true
2009-11-24 16:43:18,609 [UNICORE/X-Startup] INFO HsqldbPersist - Connecting to: jdbc:hsqldb:data/Registry
2009-11-24 16:43:18,666 [UNICORE/X-Startup] INFO DefaultHome - [Registry] Have 0 instances from permanent storage
2009-11-24 16:43:18,765 [UNICORE/X-Startup] WARN ServiceConfigReader - Removed trailing '/' from value for unicore.wsrflite.baseurl
2009-11-24 16:43:18,768 [UNICORE/X-Startup] INFO UAS - IMPORTANT! Gateway assertions verification is turned OFF. This is OK only if your UNICORE/X installation is protected by a firewall, and the only way of accessing it is through the gateway. If this is not true then you SHOULD turn on the gateway assertion verification to prevent unauthorized access.
2009-11-24 16:43:18,961 [UNICORE/X-Startup] INFO SimplePDP - Initialising SimplePDP using config file conf/xacml.config
2009-11-24 16:43:19,091 [UNICORE/X-Startup] INFO JettyServer - Configuring Jetty on unicore6-bisgrid.uni-paderborn.de:7776
2009-11-24 16:43:19,099 [UNICORE/X-Startup] INFO JettyServer - Creating SSL connector.
2009-11-24 16:43:19,116 [UNICORE/X-Startup] INFO JettyServer - Jetty server property <unicore.wsrflite.jetty.lowResourceMaxIdleTime> is <10000>
2009-11-24 16:43:19,116 [UNICORE/X-Startup] INFO JettyServer - Jetty server property <unicore.wsrflite.jetty.maxIdleTime> is <30000>
2009-11-24 16:43:19,120 [UNICORE/X-Startup] INFO JettyLogger - Logging to de.fzj.unicore.wsrflite.jetty.JettyLogger@9ab0 via de.fzj.unicore.wsrflite.jetty.JettyLogger
2009-11-24 16:43:19,122 [UNICORE/X-Startup] INFO JettyServer - Jetty server property <unicore.wsrflite.jetty.maxThreads> is <255>
2009-11-24 16:43:19,122 [UNICORE/X-Startup] INFO JettyServer - Jetty server property <unicore.wsrflite.jetty.minThreads> is <1>
2009-11-24 16:43:19,122 [UNICORE/X-Startup] INFO JettyServer - Jetty server property <unicore.wsrflite.jetty.maxIdleTime> is <30000>
2009-11-24 16:43:19,122 [UNICORE/X-Startup] INFO JettyServer - Jetty server property <unicore.wsrflite.jetty.lowThreads> is <50>
2009-11-24 16:43:19,151 [UNICORE/X-Startup] INFO JettyServer - Adding XFire servlet.
2009-11-24 16:43:19,171 [UNICORE/X-Startup] INFO SetupWorkflowService - UNICORE Workflow service, version 2.0.1
Based on developments in the EU-funded Chemomentum project (http://www.chemomentum.org)
2009-11-24 16:43:19,176 [UNICORE/X-Startup] INFO Config - Initializing Config...
2009-11-24 16:43:19,176 [UNICORE/X-Startup] INFO Config - Reading config file: conf/uas.config
2009-11-24 16:43:22,384 [UNICORE/X-Startup] INFO SetupWorkflowService - XNJS configuration property <workflow.xnjs.configfile> not set, using default <conf/xnjs.xml>
2009-11-24 16:43:22,526 [UNICORE/X-Startup] INFO XNJS - STARTING XNJS 1.2.2 (c) Forschungszentrum Juelich 2005-2008
2009-11-24 16:43:22,526 [UNICORE/X-Startup] INFO Configuration - Starting up.
2009-11-24 16:43:22,536 [UNICORE/X-Startup] INFO JDBCActionStoreFactory - Creating <de.fzj.unicore.xnjs.persistence.JDBCActionStore> ActionStore with ID=JOBS
2009-11-24 16:43:22,553 [UNICORE/X-Startup] INFO HSQLPersist - Connecting to: jdbc:hsqldb:data/NJSSTATE/JOBS
2009-11-24 16:43:22,737 [XNJS-JobRunner-1] INFO JobRunner - Worker XNJS-JobRunner-1 starting.
2009-11-24 16:43:22,738 [UNICORE/X-Startup] INFO BasicManager - Started 4 worker threads.
2009-11-24 16:43:22,739 [XNJS-JobRunner-2] INFO JobRunner - Worker XNJS-JobRunner-2 starting.
2009-11-24 16:43:22,737 [XNJS-JobRunner-3] INFO JobRunner - Worker XNJS-JobRunner-3 starting.
2009-11-24 16:43:22,741 [XNJS-JobRunner-4] INFO JobRunner - Worker XNJS-JobRunner-4 starting.
2009-11-24 16:43:22,741 [UNICORE/X-Startup] INFO HSQLPersist - Connecting to: jdbc:hsqldb:data/NJSSTATE/WORKFLOWS
2009-11-24 16:43:22,964 [UNICORE/X-Startup] INFO SetupWorkflowService - Callback URL configured: https://unicore6-bisgrid.uni-paderborn.de:8080/WORKFLOW-BisGrid/services/CallbackService
2009-11-24 16:43:23,084 [UNICORE/X-Startup] INFO SecurityManager - Server identity: CN=workflow.unicore6-bisgrid.uni-paderborn.de, OU=PCPC, OU=Universitaet Paderborn, O=GridGermany, C=DE
2009-11-24 16:43:23,159 [UNICORE/X-Startup] INFO MessageQueueStore - Connecting to: jdbc:hsqldb:data/MessageQueueStorage
2009-11-24 16:43:23,854 [UNICORE/X-Startup] INFO ServiceGroupRegistrationImpl - Creating new registry entry for service: https://unicore6-bisgrid.uni-paderborn.de:8080/WORKFLOW-BisGrid/services/WorkflowFactory?res=default_workflow_submission
2009-11-24 16:43:23,902 [UNICORE/X-Startup] INFO UASWSResourceImpl - Added registry entry for WorkflowFactory<default_workflow_submission>
2009-11-24 16:43:23,931 [UNICORE/X-Startup] INFO SetupWorkflowService - Added default_workflow_submission resource to workflow submission service.
2009-11-24 16:43:23,932 [UNICORE/X-Startup] INFO TraceKernel - Initializing Tracing Service...
2009-11-24 16:43:23,933 [UNICORE/X-Startup] INFO TraceDBImpl - Connecting to: jdbc:hsqldb:data/TracingDB
2009-11-24 16:43:24,006 [UNICORE/X-Startup] INFO TraceKernel - Adding Tracer service to Registry...
2009-11-24 16:43:24,470 [UNICORE/X-Startup] INFO ServiceGroupRegistrationImpl - Creating new registry entry for service: https://unicore6-bisgrid.uni-paderborn.de:8080/WORKFLOW-BisGrid/services/TracerService
2009-11-24 16:43:24,490 [UNICORE/X-Startup] INFO TraceKernel - Added registry entry for TracerService
2009-11-24 16:43:24,493 [UNICORE/X-Startup] INFO Startup - Added delegate for workflow dialect http://www.chemomentum.org/workflow/simple
2009-11-24 16:43:25,073 [UNICORE/X-Startup] INFO ServiceGroupRegistrationImpl - Creating new registry entry for service: https://unicore6-bisgrid.uni-paderborn.de:8080/WORKFLOW-BisGrid/services/locationManager
2009-11-24 16:43:25,094 [UNICORE/X-Startup] INFO PublishLM - LocationManager service published in registry
2009-11-24 16:43:25,101 [UNICORE/X-Startup] INFO JettyServer - Starting Jetty server
2009-11-24 16:43:25,101 [UNICORE/X-Startup] INFO JettyLogger - jetty-6.1.19
2009-11-24 16:43:29,086 [UNICORE/X-Startup] INFO JettyLogger - Started SslSocketConnector@...:7776
2009-11-24 16:43:36,027 [UNICORE/X-Startup] INFO UAS -
UNICORE/X connection status report
**********************************
Gateway connection: OK [connected to https://unicore6-bisgrid.uni-paderborn.de:8080/WORKFLOW-BisGrid/services]
Registry connection: OK [connected to https://unicore6-bisgrid.uni-paderborn.de:8080/REGISTRY/services/Registry?res=default_registry ]
XUUDB connection: OK [connected to https://unicore6-bisgrid.uni-paderborn.de:34463/]

2009-11-24 16:43:36,027 [UNICORE/X-Startup] INFO UAS - Startup time: 19289 ms.
2009-11-24 16:43:36,027 [UNICORE/X-Startup] INFO UAS - ***** Server started. *****
2009-11-24 16:43:38,011 [UNICORE/X-Startup] INFO ServiceGroupRegistrationImpl - Refreshing registry entry for: https://unicore6-bisgrid.uni-paderborn.de:8080/WORKFLOW-BisGrid/services/locationManager
2009-11-24 16:43:38,039 [UNICORE/X-Startup] INFO RegistryEntryUpdater - Refreshed registry entry for: https://unicore6-bisgrid.uni-paderborn.de:8080/WORKFLOW-BisGrid/services/locationManager
2009-11-24 16:43:38,752 [UNICORE/X-Startup] INFO ServiceGroupRegistrationImpl - Refreshing registry entry for: https://unicore6-bisgrid.uni-paderborn.de:8080/WORKFLOW-BisGrid/services/WorkflowFactory?res=default_workflow_submission
2009-11-24 16:43:38,762 [UNICORE/X-Startup] INFO RegistryEntryUpdater - Refreshed registry entry for: https://unicore6-bisgrid.uni-paderborn.de:8080/WORKFLOW-BisGrid/services/WorkflowFactory?res=default_workflow_submission
2009-11-24 16:43:39,338 [UNICORE/X-Startup] INFO ServiceGroupRegistrationImpl - Refreshing registry entry for: https://unicore6-bisgrid.uni-paderborn.de:8080/WORKFLOW-BisGrid/services/TracerService
2009-11-24 16:43:39,346 [UNICORE/X-Startup] INFO RegistryEntryUpdater - Refreshed registry entry for: https://unicore6-bisgrid.uni-paderborn.de:8080/WORKFLOW-BisGrid/services/TracerService
2009-11-24 16:44:23,989 [23940670@qtp-2884607-1] INFO XUUDBAuthoriser - New client: CN=Georg Birkenheuer, OU=PCPC, OU=Universitaet Paderborn, O=GridGermany, C=DE
2009-11-24 16:44:24,159 [23940670@qtp-2884607-1] INFO SecurityManager - Access denied for CN=Georg Birkenheuer, OU=PCPC, OU=Universitaet Paderborn, O=GridGermany, C=DE on resource WorkflowFactory[default_workflow_submission][owner: CN=workflow.unicore6-bisgrid.uni-paderborn.de,OU=PCPC,OU=Universitaet Paderborn,O=GridGermany,C=DE]
2009-11-24 16:44:24,161 [23940670@qtp-2884607-1] ERROR DefaultFaultHandler - Fault occurred!
de.fzj.unicore.uas.security.AuthorisationException: Access denied for CN=Georg Birkenheuer, OU=PCPC, OU=Universitaet Paderborn, O=GridGermany, C=DE on resource WorkflowFactory[default_workflow_submission][owner: CN=workflow.unicore6-bisgrid.uni-paderborn.de,OU=PCPC,OU=Universitaet Paderborn,O=GridGermany,C=DE]
at de.fzj.unicore.uas.security.SecurityManager.checkAuthorisation(SecurityManager.java:510)
at de.fzj.unicore.uas.security.AccessControl.checkAccess(AccessControl.java:192)
at de.fzj.unicore.wsrflite.xfire.WSRFInvoker.getServiceObject(WSRFInvoker.java:144)
at org.codehaus.xfire.service.invoker.AbstractInvoker.invoke(AbstractInvoker.java:29)
at de.fzj.unicore.wsrflite.xfire.WSRFInvoker.invoke(WSRFInvoker.java:173)
at org.codehaus.xfire.service.binding.ServiceInvocationHandler.sendMessage(ServiceInvocationHandler.java:320)
at org.codehaus.xfire.service.binding.ServiceInvocationHandler$1.run(ServiceInvocationHandler.java:86)
at org.codehaus.xfire.service.binding.ServiceInvocationHandler.execute(ServiceInvocationHandler.java:134)
at org.codehaus.xfire.service.binding.ServiceInvocationHandler.invoke(ServiceInvocationHandler.java:109)
at org.codehaus.xfire.handler.HandlerPipeline.invoke(HandlerPipeline.java:131)
at org.codehaus.xfire.transport.DefaultEndpoint.onReceive(DefaultEndpoint.java:64)
at org.codehaus.xfire.transport.AbstractChannel.receive(AbstractChannel.java:38)
at org.codehaus.xfire.transport.http.XFireServletController.invoke(XFireServletController.java:304)
at org.codehaus.xfire.transport.http.XFireServletController.doService(XFireServletController.java:129)
at org.codehaus.xfire.transport.http.XFireServlet.doPost(XFireServlet.java:116)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at org.mortbay.jetty.servlet.ServletHolder.handle(ServletHolder.java:502)
at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:389)
at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:181)
at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:765)
at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152)
at org.mortbay.jetty.Server.handle(Server.java:326)
at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:534)
at org.mortbay.jetty.HttpConnection$RequestHandler.content(HttpConnection.java:879)
at org.mortbay.jetty.HttpParser.parseNext(HttpParser.java:834)
at org.mortbay.jetty.HttpParser.parseAvailable(HttpParser.java:212)
at org.mortbay.jetty.HttpConnection.handle(HttpConnection.java:404)
at org.mortbay.jetty.bio.SocketConnector$Connection.run(SocketConnector.java:228)
at org.mortbay.jetty.security.SslSocketConnector$SslConnection.run(SslSocketConnector.java:636)
at org.mortbay.thread.QueuedThreadPool$PoolThread.run(QueuedThreadPool.java:520)

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: //Unicore 6.2.2 and WindowsXP x64

2009-11-21T04:48:28Z

hi,

in general UNICORE components are platform independent.
A exceptional case is the UNICORE Rich client: this is Eclipse based
and thus contains platform specific parts. Just try whether
the "win32" version works for you.

Best regards,
Bernd.

On Fr, 2009-11-20 at 10:53 +0100, Benjamin Ahrenholz wrote:

> Dear support team,
>
> Is there any chance to get Unicore startet on a XP 64Bit System with JavaSDK
> 64 Bit? Java build applications are supposed to be platform independent,
> right?
>
> Thanks for any hint!
>
> Kind regards, Benjamin Ahrenholz
>
> ____________________________________
>
> Dr.-Ing. Benjamin Ahrenholz
>
> iRMB - Institute for Computational
> Modeling in Civil Engineering
> Technische Universität Braunschweig
>
> Pockelsstr. 3 (9th Floor)
> Braunschweig
> D-38106, Germany
>
> phone +49 531/391-7584
> fax +49 531/391-7599
> web www.irmb.tu-bs.de
> ____________________________________
>
>
>
>
> ------------------------------------------------------------------------------
> Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
> trial. Simplify your report design, integration and deployment - and focus on
> what you do best, core application coding. Discover what's new with
> Crystal Reports now. http://p.sf.net/sfu/bobj-july
> _______________________________________________
> Unicore-support mailing list
> Unicore-support@...
> https://lists.sourceforge.net/lists/listinfo/unicore-support

//Unicore 6.2.2 and WindowsXP x64

2009-11-20T01:53:18Z

Dear support team,

Is there any chance to get Unicore startet on a XP 64Bit System with JavaSDK
64 Bit? Java build applications are supposed to be platform independent,
right?

Thanks for any hint!

Kind regards, Benjamin Ahrenholz

____________________________________

Dr.-Ing. Benjamin Ahrenholz

iRMB - Institute for Computational
Modeling in Civil Engineering
Technische Universität Braunschweig

Pockelsstr. 3 (9th Floor)
Braunschweig
D-38106, Germany

phone +49 531/391-7584
fax +49 531/391-7599
web www.irmb.tu-bs.de
____________________________________

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: Client with TD

2009-11-06T01:41:50Z

Hi Andre,

André Höing pisze:
> Hi,
>
> I am trying to build a test case in that I put a ETD Token into a
> message. I am using the JettySSLTestCase as basis, deploy a service an
> then try to insert TD via the ClientTrustDelegationUtil.
>
> XFireClientFactory fac = new XFireClientFactory();
I assume here that XFireClientFactory is the one from the package
de.fzj.unicore.wsrflite.xfire(?)

> IWorkflowService myService = fac.createProxy(IWorkflowService.class,
> getBaseurl() + "/" + workflowName + "WorkflowService", service, sec);
>
> TrustDelegation td = new
> TrustDelegation("C=DE,ST=none,L=none,O=Unicore,OU=none,CN=NJS Test
> Certificate,1.2.840.113549.1.9.1=#161c756e69636f72652d737570706f7274406c697374732e73662e6e6574");
> List<TrustDelegation> lsit = new LinkedList<TrustDelegation>();
> lsit.add(td);
> ClientTrustDelegationUtil.addTrustDelegation(myService, lsit);
>
> But my "myService" is not an implementation of XFireProxy
> java.lang.IllegalArgumentException: Argument is not an XFireProxy
> at org.codehaus.xfire.client.Client.getInstance(Client.java:531)
>
> Isn't this the correct way?

No it isn't. There are two bugs here:
1) (this one is causing your problem) From the JavaDoc of the method you
call (your last line):
Configures trust delegation for the Xfire proxy. It is assumed that
standard XFireProxy was used (so don't use this method for clients
obtained with WSRFLite or other higher level frameworks -- see other
methods).
[CUT]
So you should use the other method as suggested and pass it an object of
the Client class as the 1st argument.

2) Even when you fix this issue it still won't work. The TD you created
is unsigned and doesn't provide all the necessary information. Use one
of the utility methods from the eu.unicore.security.etd.ETDImpl to
create your TD - it will set all the required things correctly. You can
see ETDApi from the same package to see the sole programmer interface
implemented by ETDImpl.

Best regards
Krzysztof

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Client with TD

2009-11-05T05:51:23Z

Hi,

I am trying to build a test case in that I put a ETD Token into a
message. I am using the JettySSLTestCase as basis, deploy a service an
then try to insert TD via the ClientTrustDelegationUtil.

XFireClientFactory fac = new XFireClientFactory();
IWorkflowService myService = fac.createProxy(IWorkflowService.class,
getBaseurl() + "/" + workflowName + "WorkflowService", service, sec);

TrustDelegation td = new
TrustDelegation("C=DE,ST=none,L=none,O=Unicore,OU=none,CN=NJS Test
Certificate,1.2.840.113549.1.9.1=#161c756e69636f72652d737570706f7274406c697374732e73662e6e6574");
List<TrustDelegation> lsit = new LinkedList<TrustDelegation>();
lsit.add(td);
ClientTrustDelegationUtil.addTrustDelegation(myService, lsit);

But my "myService" is not an implementation of XFireProxy
java.lang.IllegalArgumentException: Argument is not an XFireProxy
at org.codehaus.xfire.client.Client.getInstance(Client.java:531)

Isn't this the correct way?

André

--

André Höing

Technische Universitaet Berlin
Faculty of Electrical Engineering and Computer Science
Department of Telecommunication Systems
Complex and Distributed IT Systems

Secr. EN 59
Einsteinufer 17
10587 Berlin

Phone: +49 30 314 78946
Fax: +49 30 314 21114
e-mail: andre.hoeing@...

WWW: http://www.cit.tu-berlin.de/

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: rich client gridbeans

2009-11-04T08:02:07Z

hi Igor,

just use "http" instead:

http://sourceforge.net/apps/mediawiki/unicore/index.php?title=GridBean_Development

Best regards,
Bernd.

On Mi, 2009-11-04 at 16:36 +0100, Igor Polyakov wrote:
> Hi, Bastian,
>
>
> Thank you very much for the answer! Unfortunately the link i'm eager
> to see
> (https://sourceforge.net/apps/mediawiki/unicore/index.php?title=GridBean_Development) is not publicly accessible (requires authentification). Is there any way to get an access there for me?
>
>
> Best regards, Igor
--
Dr. Bernd Schuller
Distributed Systems and Grid Computing
Juelich Supercomputing Centre, http://www.fz-juelich.de/jsc
Phone: +49 246161-8736 (fax -8556)
Personal blog: www.jroller.com/page/gridhaus

------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: rich client gridbeans

2009-11-04T07:36:06Z

Hi, Bastian,

Thank you very much for the answer! Unfortunately the link i'm eager to see (https://sourceforge.net/apps/mediawiki/unicore/index.php?title=GridBean_Development) is not publicly accessible (requires authentification). Is there any way to get an access there for me?

Best regards, Igor

Re: rich client gridbeans

2009-11-02T03:38:39Z

Hi Igor,

I've just updated a wiki page that I had written about GridBean
development in the course of the Chemomentum project. It is now publicly
accessible at
https://sourceforge.net/apps/mediawiki/unicore/index.php?title=GridBean_Development

It covers basic principles of GridBean development and also includes a
small section that explicitly deals with API changes since 1.4. The
section is not fully not exhaustive, but I think it provides a good
starting point for overcoming the most frequent issues that developers
will have.
In case you still run into problems or come across API changes that
haven't been documented there, feel free to ask me more specifically. I
will also try to improve the migration section on the wiki in order to
make porting GridBeans even easier.

Another document you might want to look at can be found at
http://www.unicore.eu/documentation/manuals/unicore6/files/GridbeanDevelopersGuide.pdf.
It is a general guide to implementing GridBeans, written for the new API.

Regarding GridBeans for Gaussian and Gamess, you might want to contact
two developers that have recently worked on updated versions of these:
Valentina Huber (here at Jülich) is in the course of implementing a
GridBean for Gaussian, whereas Lukasz Miroslaw (Uni Zürich) has been
working on a Gamess GridBean for the Chemomentum project.

Hope this helps,

Bastian

Igor Polyakov wrote:

> Dear Unicore Developers,
>
> My question is related to the Rich client. Until recently i used GPE
> client 4 unicore and several gridbeans with it e.g. gaussian 03
> gridbean and gamess gridbean based on it. I was really said to realize
> that those gridbeans do not work with the Rich client, and even worse
> - when i put these gridbeans in the folder with the standard ones,
> which work perfectly ok, the client doesn't rezognize old gridbeans at
> all as they are not even there. Could somebody help me with this
> problem? Is there any general guide how to port old gridbeans to the
> new format supported be Rich client? Any help is much appreciated.
>
> Sincerely yours, Igor

------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

rich client gridbeans

2009-10-31T16:12:52Z

Dear Unicore Developers,

My question is related to the Rich client. Until recently i used GPE client 4 unicore and several gridbeans with it e.g. gaussian 03 gridbean and gamess gridbean based on it. I was really said to realize that those gridbeans do not work with the Rich client, and even worse - when i put these gridbeans in the folder with the standard ones, which work perfectly ok, the client doesn't rezognize old gridbeans at all as they are not even there. Could somebody help me with this problem? Is there any general guide how to port old gridbeans to the new format supported be Rich client? Any help is much appreciated.

Sincerely yours, Igor

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: Where is the XUUDB?

2009-10-30T10:13:11Z

hi Andreas,

On Fr, 2009-10-30 at 16:09 +0100, Andreas Maier wrote:

> Bernd Schuller wrote:
> >
> > What is so bad about using admin.sh ?
> > You can even use it from remote :-)
>
> What do you mean?
> Should I write a script that logs in as user "unicore" on the unicore server and starts admin.sh?
> Is that the remote capability of admin.sh? Then I better do a cron job.
> Or is there a web-based interface to the XUUDB? That would be useful, if I could access it for example
> by SOAP or something similar..
>

In fact admin.sh connects to the xuudb server using SOAP.
The docs/XUUDB.txt file in the server distribution contains an overview
about the XUUDB and its functionality.

Best regards,
Bernd.

--
Dr. Bernd Schuller
Distributed Systems and Grid Computing
Juelich Supercomputing Centre, http://www.fz-juelich.de/jsc
Phone: +49 246161-8736 (fax -8556)
Personal blog: www.jroller.com/page/gridhaus

------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: Where is the XUUDB?

2009-10-30T08:16:02Z

Andreas Maier <Andreas.Maier@...> wrote:

>
> What do you mean?
> Should I write a script that logs in as user "unicore" on the unicore server and starts admin.sh?
> Is that the remote capability of admin.sh?

No, you can install the xuudb libraries, say, on your local machine and alter
the xuudb_client configuration files to point to the remote xuudb
installation. Of course, you need a valid private key for the client setup,
and you also need to add the according public key to the server's truststore.

Regards,
Rebecca

--
"In the beginning was the word, and the word was content-type: text/plain."

"Liberty dies by inches."

Rebecca Breu (r.breu@...)

Phone: +49 2461 61 - 2294
Fax: +49 2461 61 - 6656

Distributed Systems and Grid Computing Division,
Jülich Supercomputing Centre

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

smime.p7s (2K) Download Attachment

Re: Where is the XUUDB?

2009-10-30T08:09:50Z

Bernd Schuller wrote:

> hi
>
> On Fr, 2009-10-30 at 13:49 +0100, Rebecca Breu wrote:
>> Andreas Maier <Andreas.Maier@...> wrote:
>>
> [...]
>>> However the problem with the SQL script is, that I do have to restart
>>> XUUDB everytime then I change it manually to activate the changes, don't I ?
>
>> Correct. We don't recommend this.
>>
>
> it is even worse. You need to stop the XUUDB, change the .script file,
> and restart. Bad idea...
>
>>> It would be much easier, if the XUUDB would read every time the user data from a csv file directly,
>>> wouldn't it?
>> I don't see why. It would not guarantee that the data can be imported
>> correctly, so you'd have to browse log files for error messages...
>>
>>> As it is now, I can change data in the XUUDB during runtime only via admin.sh, am I right?
>
> What is so bad about using admin.sh ?
> You can even use it from remote :-)

What do you mean?
Should I write a script that logs in as user "unicore" on the unicore server and starts admin.sh?
Is that the remote capability of admin.sh? Then I better do a cron job.
Or is there a web-based interface to the XUUDB? That would be useful, if I could access it for example
by SOAP or something similar..

Andreas

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: Where is the XUUDB?

2009-10-30T06:09:09Z

hi

On Fr, 2009-10-30 at 13:49 +0100, Rebecca Breu wrote:
> Andreas Maier <Andreas.Maier@...> wrote:
>
[...]
> > However the problem with the SQL script is, that I do have to restart
> > XUUDB everytime then I change it manually to activate the changes, don't I ?

> Correct. We don't recommend this.
>

it is even worse. You need to stop the XUUDB, change the .script file,
and restart. Bad idea...

> > It would be much easier, if the XUUDB would read every time the user data from a csv file directly,
> > wouldn't it?
>
> I don't see why. It would not guarantee that the data can be imported
> correctly, so you'd have to browse log files for error messages...
>
> > As it is now, I can change data in the XUUDB during runtime only via admin.sh, am I right?

What is so bad about using admin.sh ?
You can even use it from remote :-)

If you want to use a plain file instead of the XUUDB, you could use the
"FileBasedAuthoriser" instead. Note: the XUUDB is better, because you
need only one XUUDB for all components at a site.

But if you want to check this out, have a look in the latest (6.2.2)
core server, the registry configuration contains the necessary info.

set in uas.config

uas.security.authoriser=de.fzj.unicore.uas.security.util.FileBasedAuthoriser
#map file name
uas.security.simpleuudb=conf/simpleuudb

and in the simpleuudb file you have entries of the form

<entry key="CN=Demo User,O=sf,OU=unicore">role:user;xlogin:someuser</entry>

As I said, the XUUDB is better, but if you want to try it go ahead :-)

Best regards,
Bernd.

--
Dr. Bernd Schuller
Distributed Systems and Grid Computing
Juelich Supercomputing Centre, http://www.fz-juelich.de/jsc
Phone: +49 246161-8736 (fax -8556)
Personal blog: www.jroller.com/page/gridhaus

------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: Where is the XUUDB?

2009-10-30T05:49:56Z

Andreas Maier <Andreas.Maier@...> wrote:

> That's true, but it would mean, that after copying the CSV file to the unicore machine I would also have
> to run admin.sh on the destination machine.

Yes, is that a problem? For our machines within D-Grid, for example, we have
set up a cron-job wich fetches the latest csv file from a central service and
invokes the import command.

> (since it might happen, that admin.sh fails).
> But if I would generate the SQL script and send it to the unicore machine, I could be sure, that the file in
> the repository is really the XUUDB.

Why would admin.sh fail? If it's because of corrupt input data--this could
also happen with a corrupt SQL script, leaving you with an XUUDB not starting
or having its internal data messed up. The admin.sh at least does do some
sanity checks so that you can't end up with an unusable XUUDB.

You can always check the output of the admin.sh script for messages, it
tells you how many entries it imported etc.

> However the problem with the SQL script is, that I do have to restart
> XUUDB everytime then I change it manually to activate the changes, don't I ?

Correct. We don't recommend this.

> It would be much easier, if the XUUDB would read every time the user data from a csv file directly,
> wouldn't it?

I don't see why. It would not guarantee that the data can be imported
correctly, so you'd have to browse log files for error messages...

> As it is now, I can change data in the XUUDB during runtime only via admin.sh, am I right?

Correct.

Regards,
Rebecca

--
"In the beginning was the word, and the word was content-type: text/plain."

"Liberty dies by inches."

Rebecca Breu (r.breu@...)

Phone: +49 2461 61 - 2294
Fax: +49 2461 61 - 6656

Distributed Systems and Grid Computing Division,
Jülich Supercomputing Centre

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

smime.p7s (2K) Download Attachment

Re: Where is the XUUDB?

2009-10-30T04:15:31Z

Andreas Maier <Andreas.Maier@...> wrote:

>
> I'm asking this, because in Unicore 5 we used to generate the XUUDB file from a script getting data from our local
> user database, stored the XUUDB in a repository and distributed that file to our unicore server via cfengine.
> Can a mechanism like that be used for Unicore 6, too?

The XUUDB can import from and export to csv files, the admin.sh scripts has
commands for that. No need to worry about the SQL scripts. :)

Regards,
Rebecca

--
"In the beginning was the word, and the word was content-type: text/plain."

"Liberty dies by inches."

Rebecca Breu (r.breu@...)

Phone: +49 2461 61 - 2294
Fax: +49 2461 61 - 6656

Distributed Systems and Grid Computing Division,
Jülich Supercomputing Centre

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

smime.p7s (2K) Download Attachment

Where is the XUUDB?

2009-10-30T03:26:26Z

Dear Unicore Support,

this might sound like a dumb question, but where is the file that holds
the Unicore6 UUDB and which format is it in?
I could only find xuudb/data/UnicoreUserDB.data.script :

CREATE SCHEMA PUBLIC AUTHORIZATION DBA
CREATE MEMORY TABLE UUDB(GCID VARCHAR(255),XLOGIN VARCHAR(255),TOKEN VARCHAR(8192),ROLE VARCHAR(255),PROJECTS VARCHAR(255),CONSTRAINT SYS_CT_46 UNIQUE(GCID,TOKEN))
CREATE USER SA PASSWORD ""
GRANT DBA TO SA
SET WRITE_DELAY 10
SET SCHEMA PUBLIC
INSERT INTO UUDB VALUES('deisa','fzj','CN=Michael,OU=Forschungszentrum Juelich GmbH,O=GridGermany,C=DE','user','')
...

Is this all that defines the database? So at every start of XUUDB you generate a SQL database in memory? (I guess you are using sqlite for it?)

I'm asking this, because in Unicore 5 we used to generate the XUUDB file from a script getting data from our local
user database, stored the XUUDB in a repository and distributed that file to our unicore server via cfengine.
Can a mechanism like that be used for Unicore 6, too? Does it mean, that I have to generate the
SQL file UnicoreUserDB.data.script from a script? How can I generate the UnicoreUserDB.data.script on a machine,
where Unicore is not installed? Can I make use of some existing Unicore Java classes to write a Java program,
that will then generate UnicoreUserDB.data.script?

Thank you for your help,
Andreas Maier

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: Problems with BES submission after changing to newer Unicore server version

2009-10-25T08:46:10Z

Dear Shahbaz,

changing the xnjs jar file solved my problem, now my client works with
both server versions.

Thank you for your help!

Best regards,
Peter

Idézet (Shahbaz Memon <shahbaz.memon@...>):

> Dear Peter,
>
>> 2009-10-23 10:48:34,045 [XNJS-JobRunner-2] WARN Execution - Failure
>> in submit.
>> 2009-10-23 10:48:34,046 [XNJS-JobRunner-2] INFO JSDLProcessor -
>> Action 88532791-7a53-4993-b73b-3cc6e3fff940 FAILED: Could not submit
>> job: java.lang.Exception: Application could not be mapped to an
>> executable.
>
> I can see the problem occurs during the job execution. It has actually
> occurred due to a minor typo in xnjs, which prevents xnjs to
> understand jsdl's HPCProfileApplication element.
> The changes has been committed to svn and they will be effective in
> next release.
>
> For your convenience, I have also attached the patched xnjs lib, which
> will solve this problem. In your current installation setup, please
> replace the unicore-servers-6.2.2/unicorex/lib/xnjs-module-core-1.2.2.jar
> with the attached one (xnjs-module-core-1.2.3-SNAPSHOT.jar).
>
>> In my client application I use the following versions of jsdl and bes
>> jar files:
>> - jsdl-xmlbeans-1.2.jar
>> - ogsabes-core-1.1.3.jar
>> - ogsabes-types-1.4.jar
>
> This is always recommended to use the same versions on server and the
> client side.
>
> Regards,
>
> Shahbaz
> On Fri, Oct 23, 2009 at 11:34 AM, <modos@...> wrote:
>> Dear Unicore Developers,
>>
>> I'm developing a client application what sends jobs to WS with
>> OGSA-BES interface. Until now I have tested it with Unicore 1.3.3 and
>> worked correctly.
>>
>> When I tried the same application (and same job configuration) to work
>> together with the newest Unicore server (6.2.2), it didn't work. I
>> found the following error in uas.log file:
>>
>> 2009-10-23 10:48:32,317 [31845311@qtp-11816628-2] INFO
>> XUUDBAuthoriser - New client:
>> 1.2.840.113549.1.9.1=#161c756e69636f72652d737570706f7274406c697374732e73662e6e6574,C=DE,O=unicore.eu,OU=Testing,CN=UNICORE
>> demo
>> user
>> 2009-10-23 10:48:32,495 [31845311@qtp-11816628-2] INFO BESFactoryImpl
>> - Creating New Activity
>> 2009-10-23 10:48:32,496 [31845311@qtp-11816628-2] INFO BESFactoryImpl
>> - BES accepting new activities: true
>> 2009-10-23 10:48:32,574 [31845311@qtp-11816628-2] INFO
>> BasicTSIFactory - Creating new uspace for
>> 88532791-7a53-4993-b73b-3cc6e3fff940
>> client: EMAILADDRESS=unicore-support@..., C=DE, O=unicore.eu,
>> OU=Testing, CN=UNICORE demo user
>> Xlogin: [user], selected login: user, role: user: role from
>> authorisation, authenticated using <CONSIGNOR X509v3>
>> 2009-10-23 10:48:32,608 [31845311@qtp-11816628-2] INFO
>> BESActivityImpl - Initializing BESActivity
>> <88532791-7a53-4993-b73b-3cc6e3fff940> for client
>> EMAILADDRESS=unicore-support@..., C=DE, O=unicore.eu,
>> OU=Testing, CN=UNICORE demo user
>> Xlogin: [user], selected login: user, role: user: role from
>> authorisation, authenticated using <CONSIGNOR X509v3>
>> 2009-10-23 10:48:32,683 [31845311@qtp-11816628-2] INFO
>> PathedStorageImpl - SMS init in
>> </home/user/setup/UNICORE622/unicorex/data/FILESPACE/88532791-7a53-4993-b73b-3cc6e3fff940/>
>> 2009-10-23 10:48:33,664 [31845311@qtp-11816628-2] INFO BESFactoryImpl
>> - Getting Activity Statuses
>> 2009-10-23 10:48:34,045 [XNJS-JobRunner-2] ERROR Execution - Could
>> not properly incarnate
>> <jsdl1:HPCProfileApplication
>> xmlns:jsdl1="http://schemas.ggf.org/jsdl/2006/07/jsdl-hpcpa"
>> xmlns:jsdl="http://schemas.ggf.org/jsdl/2005/11/jsdl"
>> xmlns:bes="http://schemas.ggf.org/bes/2006/08/bes-factory"
>> xmlns:xsd="http://www.w3.org/2001/XMLSchema"
>> xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
>> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
>> <jsdl1:Executable>/bin/bash</jsdl1:Executable>
>> <jsdl1:Argument>bes_executable_2</jsdl1:Argument>
>> <jsdl1:Output>bes_stdout.log</jsdl1:Output>
>> <jsdl1:Error>bes_stderr.log</jsdl1:Error>
>> </jsdl1:HPCProfileApplication>,
>> got
>> <xml-fragment/>
>> 2009-10-23 10:48:34,045 [XNJS-JobRunner-2] WARN Execution - Failure
>> in submit.
>> 2009-10-23 10:48:34,046 [XNJS-JobRunner-2] INFO JSDLProcessor -
>> Action 88532791-7a53-4993-b73b-3cc6e3fff940 FAILED: Could not submit
>> job: java.lang.Exception: Application could not be mapped to an
>> executable.
>> 2009-10-23 10:48:34,070 [XNJS-JobRunner-2] ERROR JobRunner - Error
>> during processing action <88532791-7a53-4993-b73b-3cc6e3fff940>
>> de.fzj.unicore.xnjs.ems.ProcessingException: Could not submit job:
>> java.lang.Exception: Application could not be mapped to an executable.
>> at
>> de.fzj.unicore.xnjs.jsdl.JSDLProcessor.handlePending(JSDLProcessor.java:268)
>> at de.fzj.unicore.xnjs.ems.Processor.process(Processor.java:126)
>> at de.fzj.unicore.xnjs.ems.JobRunner.run(JobRunner.java:123)
>> Caused by: de.fzj.unicore.xnjs.ems.ExecutionException:
>> java.lang.Exception: Application could not be mapped to an executable.
>> at
>> de.fzj.unicore.xnjs.simple.BasicExecution.submit(BasicExecution.java:149)
>> at
>> de.fzj.unicore.xnjs.jsdl.JSDLProcessor.handlePending(JSDLProcessor.java:257)
>> ... 2 more
>> Caused by: java.lang.Exception: Application could not be mapped to an
>> executable.
>> at
>> de.fzj.unicore.xnjs.simple.BasicExecution.submit(BasicExecution.java:120)
>> ... 3 more
>> 2009-10-23 10:48:34,120 [XNJS-JobRunner-4] INFO USAGE -
>> [NOT_SUCCESSFUL] [ null] [ 88532791-7a53-4993-b73b-3cc6e3fff940]
>> [EMAILADDRESS=unicore-support@..., C=DE, O=unicore.eu,
>> OU=Testing, CN=UNICORE demo user]
>>
>>
>> In my client application I use the following versions of jsdl and bes
>> jar files:
>> - jsdl-xmlbeans-1.2.jar
>> - ogsabes-core-1.1.3.jar
>> - ogsabes-types-1.4.jar
>>
>> I see you continued to develop this files and use newer versions for
>> the 6.2.2 server. I don't know if I change to the newer version of jar
>> files it will solve my problem and also keeps compatible with older
>> Unicore server versions?
>>
>> Do you know what could be the reason of this problem and how can I solve it?
>>
>> Thank you in advance for your help!
>>
>> Greetings,
>> Peter Modos
>>
>> ----------------------------------------------------------------
>> This message was sent using IMP, the Internet Messaging Program.
>>
>> ------------------------------------------------------------------------------
>> Come build with us! The BlackBerry(R) Developer Conference in SF, CA
>> is the only developer event you need to attend this year. Jumpstart your
>> developing skills, take BlackBerry mobile applications to market and stay
>> ahead of the curve. Join us from November 9 - 12, 2009. Register now!
>> http://p.sf.net/sfu/devconference
>> _______________________________________________
>> Unicore-support mailing list
>> Unicore-support@...
>> https://lists.sourceforge.net/lists/listinfo/unicore-support
>>
>> ------------------------------------------------------------------------------------------------
>> ------------------------------------------------------------------------------------------------
>> Forschungszentrum Juelich GmbH
>> 52425 Juelich
>> Sitz der Gesellschaft: Juelich
>> Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
>> Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
>> Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
>> Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
>> Prof. Dr. Sebastian M. Schmidt
>> ------------------------------------------------------------------------------------------------
>> ------------------------------------------------------------------------------------------------
>>
>

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Fwd: Problems with BES submission after changing to newer Unicore server version

2009-10-25T04:18:40Z

Hi,

here is my yesterday's response to this query, which couldn't be
reached due to my email client problems.

--------------------------------------------------------------------------------------------------------------------------------------------------
Dear Peter,

> 2009-10-23 10:48:34,045 [XNJS-JobRunner-2] WARN Execution - Failure
> in submit.
> 2009-10-23 10:48:34,046 [XNJS-JobRunner-2] INFO JSDLProcessor -
> Action 88532791-7a53-4993-b73b-3cc6e3fff940 FAILED: Could not submit
> job: java.lang.Exception: Application could not be mapped to an
> executable.

I can see the problem occurs during the job execution. It has actually
happened due to a minor typo in xnjs, which prevents xnjs to
understand the jsdl's HPCProfileApplication element.
The changes has been committed to svn and they will be effective in
next release.

For your convenience, I have also attached the patched xnjs lib, which
will solve this problem.

To set this up: please
replace the unicore-servers-6.2.2/unicorex/lib/xnjs-module-core-1.2.2.jar
from your current installation
with the attached one (xnjs-module-core-1.2.3-SNAPSHOT.jar).

> In my client application I use the following versions of jsdl and bes
> jar files:
> - jsdl-xmlbeans-1.2.jar
> - ogsabes-core-1.1.3.jar
> - ogsabes-types-1.4.jar

First of all it is recommended to use the latest release, which has
improvements over the previous ones. In order to avoid any
ambiguities, it is better to use the same versions on server and the
client side.

Regards,

Shahbaz
On Fri, Oct 23, 2009 at 11:34 AM, <modos@...> wrote:

> Dear Unicore Developers,
>
> I'm developing a client application what sends jobs to WS with
> OGSA-BES interface. Until now I have tested it with Unicore 1.3.3 and
> worked correctly.
>
> When I tried the same application (and same job configuration) to work
> together with the newest Unicore server (6.2.2), it didn't work. I
> found the following error in uas.log file:
>
> 2009-10-23 10:48:32,317 [31845311@qtp-11816628-2] INFO
> XUUDBAuthoriser - New client:
> 1.2.840.113549.1.9.1=#161c756e69636f72652d737570706f7274406c697374732e73662e6e6574,C=DE,O=unicore.eu,OU=Testing,CN=UNICORE demo
> user
> 2009-10-23 10:48:32,495 [31845311@qtp-11816628-2] INFO BESFactoryImpl
> - Creating New Activity
> 2009-10-23 10:48:32,496 [31845311@qtp-11816628-2] INFO BESFactoryImpl
> - BES accepting new activities: true
> 2009-10-23 10:48:32,574 [31845311@qtp-11816628-2] INFO
> BasicTSIFactory - Creating new uspace for
> 88532791-7a53-4993-b73b-3cc6e3fff940
> client: EMAILADDRESS=unicore-support@..., C=DE, O=unicore.eu,
> OU=Testing, CN=UNICORE demo user
> Xlogin: [user], selected login: user, role: user: role from
> authorisation, authenticated using <CONSIGNOR X509v3>
> 2009-10-23 10:48:32,608 [31845311@qtp-11816628-2] INFO
> BESActivityImpl - Initializing BESActivity
> <88532791-7a53-4993-b73b-3cc6e3fff940> for client
> EMAILADDRESS=unicore-support@..., C=DE, O=unicore.eu,
> OU=Testing, CN=UNICORE demo user
> Xlogin: [user], selected login: user, role: user: role from
> authorisation, authenticated using <CONSIGNOR X509v3>
> 2009-10-23 10:48:32,683 [31845311@qtp-11816628-2] INFO
> PathedStorageImpl - SMS init in
> </home/user/setup/UNICORE622/unicorex/data/FILESPACE/88532791-7a53-4993-b73b-3cc6e3fff940/>
> 2009-10-23 10:48:33,664 [31845311@qtp-11816628-2] INFO BESFactoryImpl
> - Getting Activity Statuses
> 2009-10-23 10:48:34,045 [XNJS-JobRunner-2] ERROR Execution - Could
> not properly incarnate
> <jsdl1:HPCProfileApplication
> xmlns:jsdl1="http://schemas.ggf.org/jsdl/2006/07/jsdl-hpcpa"
> xmlns:jsdl="http://schemas.ggf.org/jsdl/2005/11/jsdl"
> xmlns:bes="http://schemas.ggf.org/bes/2006/08/bes-factory"
> xmlns:xsd="http://www.w3.org/2001/XMLSchema"
> xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
> <jsdl1:Executable>/bin/bash</jsdl1:Executable>
> <jsdl1:Argument>bes_executable_2</jsdl1:Argument>
> <jsdl1:Output>bes_stdout.log</jsdl1:Output>
> <jsdl1:Error>bes_stderr.log</jsdl1:Error>
> </jsdl1:HPCProfileApplication>,
> got
> <xml-fragment/>
> 2009-10-23 10:48:34,045 [XNJS-JobRunner-2] WARN Execution - Failure
> in submit.
> 2009-10-23 10:48:34,046 [XNJS-JobRunner-2] INFO JSDLProcessor -
> Action 88532791-7a53-4993-b73b-3cc6e3fff940 FAILED: Could not submit
> job: java.lang.Exception: Application could not be mapped to an
> executable.
> 2009-10-23 10:48:34,070 [XNJS-JobRunner-2] ERROR JobRunner - Error
> during processing action <88532791-7a53-4993-b73b-3cc6e3fff940>
> de.fzj.unicore.xnjs.ems.ProcessingException: Could not submit job:
> java.lang.Exception: Application could not be mapped to an executable.
> at
> de.fzj.unicore.xnjs.jsdl.JSDLProcessor.handlePending(JSDLProcessor.java:268)
> at de.fzj.unicore.xnjs.ems.Processor.process(Processor.java:126)
> at de.fzj.unicore.xnjs.ems.JobRunner.run(JobRunner.java:123)
> Caused by: de.fzj.unicore.xnjs.ems.ExecutionException:
> java.lang.Exception: Application could not be mapped to an executable.
> at de.fzj.unicore.xnjs.simple.BasicExecution.submit(BasicExecution.java:149)
> at
> de.fzj.unicore.xnjs.jsdl.JSDLProcessor.handlePending(JSDLProcessor.java:257)
> ... 2 more
> Caused by: java.lang.Exception: Application could not be mapped to an
> executable.
> at de.fzj.unicore.xnjs.simple.BasicExecution.submit(BasicExecution.java:120)
> ... 3 more
> 2009-10-23 10:48:34,120 [XNJS-JobRunner-4] INFO USAGE -
> [NOT_SUCCESSFUL] [ null] [ 88532791-7a53-4993-b73b-3cc6e3fff940]
> [EMAILADDRESS=unicore-support@..., C=DE, O=unicore.eu,
> OU=Testing, CN=UNICORE demo user]
>
>
> In my client application I use the following versions of jsdl and bes
> jar files:
> - jsdl-xmlbeans-1.2.jar
> - ogsabes-core-1.1.3.jar
> - ogsabes-types-1.4.jar
>
> I see you continued to develop this files and use newer versions for
> the 6.2.2 server. I don't know if I change to the newer version of jar
> files it will solve my problem and also keeps compatible with older
> Unicore server versions?
>
> Do you know what could be the reason of this problem and how can I solve it?
>
> Thank you in advance for your help!
>
> Greetings,
> Peter Modos
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
> ------------------------------------------------------------------------------
> Come build with us! The BlackBerry(R) Developer Conference in SF, CA
> is the only developer event you need to attend this year. Jumpstart your
> developing skills, take BlackBerry mobile applications to market and stay
> ahead of the curve. Join us from November 9 - 12, 2009. Register now!
> http://p.sf.net/sfu/devconference
> _______________________________________________
> Unicore-support mailing list
> Unicore-support@...
> https://lists.sourceforge.net/lists/listinfo/unicore-support
>
> ------------------------------------------------------------------------------------------------
> ------------------------------------------------------------------------------------------------
> Forschungszentrum Juelich GmbH
> 52425 Juelich
> Sitz der Gesellschaft: Juelich
> Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
> Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
> Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
> Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
> Prof. Dr. Sebastian M. Schmidt
> ------------------------------------------------------------------------------------------------
> ------------------------------------------------------------------------------------------------
>

xnjs-module-core-1.2.3-SNAPSHOT.jar (583K) Download Attachment

Re: Problems with BES submission after changing to newer Unicore server version

2009-10-25T03:46:28Z

Hello Bernd,

On 2009.10.24., at 15:01, Bernd Schuller wrote:

> Hi Gabor, Peter,
>
> thanks for the clarification, it is clearly a UNICORE bug. We're using
> the wrong xsd file apparently.
>
> I've added a tracker item
> <https://sourceforge.net/tracker/?func=detail&aid=2885431&group_id=102081&atid=633902
> >
> and it will be fixed in the next release.

Great!

Gábor

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

smime.p7s (4K) Download Attachment

Re: Problems with BES submission after changing to newer Unicore server version

2009-10-24T06:01:59Z

Hi Gabor, Peter,

thanks for the clarification, it is clearly a UNICORE bug. We're using
the wrong xsd file apparently.

I've added a tracker item
<https://sourceforge.net/tracker/?func=detail&aid=2885431&group_id=102081&atid=633902>
and it will be fixed in the next release.

Best regards,
Bernd.

On Sa, 2009-10-24 at 14:00 +0200, Gabor Roczei wrote:

> Dear Peter and Bernd Schuller,
>
> On 2009.10.24., at 13:29, Bernd Schuller wrote:
>
> > hi,
> >
> > the problem lies with the namespace of the hpcpa JSDL document.
> > You use xmlns:jsdl1="http://schemas.ggf.org/jsdl/2006/07/jsdl-hpcpa"
> > where the server would like to see "ogf.org" not "ggf.org"
> > Since it is not so clear to me which is the "correct" one,
> > the next UNICORE release will simply accept both.
> >
> > I assume if you use the newer jsdl-xmlbeans on the client it will work
> > with all UNICORE server versions where BES is integrated (starting
> > with
> > 6.2.0).
> >
> > Maybe Shahbaz (on CC) who is our BES expert can assist you better with
> > solving/avoiding this issue.
>
>
> This is the standard namespace: http://schemas.ggf.org/jsdl/2006/07/jsdl-hpcpa
> We are using only this in the ARC middleware.
>
> Ammunition of this namespace:
>
> The (BES, JSDL) interoperability document (http://www.ogf.org/documents/GFD.124.pdf
> ) referencing to this HPCPA document:
>

http://www.ogf.org/documents/GFD.111.pdf

>
> and this document content this namespace: http://schemas.ggf.org/jsdl/2006/07/jsdl-hpcpa
>
> We can say that this is the standard because the most middleware
> vendors using this.
>
> Cheers,
>
> Gabor
>
>
>
>

--
Dr. Bernd Schuller
Distributed Systems and Grid Computing
Juelich Supercomputing Centre, http://www.fz-juelich.de/jsc
Phone: +49 246161-8736 (fax -8556)
Personal blog: www.jroller.com/page/gridhaus

------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: Problems with BES submission after changing to newer Unicore server version

2009-10-24T05:00:12Z

Dear Peter and Bernd Schuller,

On 2009.10.24., at 13:29, Bernd Schuller wrote:

> hi,
>
> the problem lies with the namespace of the hpcpa JSDL document.
> You use xmlns:jsdl1="http://schemas.ggf.org/jsdl/2006/07/jsdl-hpcpa"
> where the server would like to see "ogf.org" not "ggf.org"
> Since it is not so clear to me which is the "correct" one,
> the next UNICORE release will simply accept both.
>
> I assume if you use the newer jsdl-xmlbeans on the client it will work
> with all UNICORE server versions where BES is integrated (starting
> with
> 6.2.0).
>
> Maybe Shahbaz (on CC) who is our BES expert can assist you better with
> solving/avoiding this issue.

This is the standard namespace: http://schemas.ggf.org/jsdl/2006/07/jsdl-hpcpa
We are using only this in the ARC middleware.

Ammunition of this namespace:

The (BES, JSDL) interoperability document (http://www.ogf.org/documents/GFD.124.pdf
) referencing to this HPCPA document:

http://www.ogf.org/documents/GFD.111.pdf

and this document content this namespace: http://schemas.ggf.org/jsdl/2006/07/jsdl-hpcpa

We can say that this is the standard because the most middleware
vendors using this.

Cheers,

Gabor

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

smime.p7s (4K) Download Attachment

Re: Problems with BES submission after changing to newer Unicore server version

2009-10-24T04:29:57Z

hi,

the problem lies with the namespace of the hpcpa JSDL document.
You use xmlns:jsdl1="http://schemas.ggf.org/jsdl/2006/07/jsdl-hpcpa"
where the server would like to see "ogf.org" not "ggf.org"
Since it is not so clear to me which is the "correct" one,
the next UNICORE release will simply accept both.

I assume if you use the newer jsdl-xmlbeans on the client it will work
with all UNICORE server versions where BES is integrated (starting with
6.2.0).

Maybe Shahbaz (on CC) who is our BES expert can assist you better with
solving/avoiding this issue.

Best regards,
Bernd.

On Fr, 2009-10-23 at 11:34 +0200, modos@... wrote:

--
Dr. Bernd Schuller
Distributed Systems and Grid Computing
Juelich Supercomputing Centre, http://www.fz-juelich.de/jsc
Phone: +49 246161-8736 (fax -8556)
Personal blog: www.jroller.com/page/gridhaus

------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Problems with BES submission after changing to newer Unicore server version

2009-10-23T02:34:56Z

Dear Unicore Developers,

I'm developing a client application what sends jobs to WS with
OGSA-BES interface. Until now I have tested it with Unicore 1.3.3 and
worked correctly.

When I tried the same application (and same job configuration) to work
together with the newest Unicore server (6.2.2), it didn't work. I
found the following error in uas.log file:

2009-10-23 10:48:32,317 [31845311@qtp-11816628-2] INFO
XUUDBAuthoriser - New client:
1.2.840.113549.1.9.1=#161c756e69636f72652d737570706f7274406c697374732e73662e6e6574,C=DE,O=unicore.eu,OU=Testing,CN=UNICORE demo
user
2009-10-23 10:48:32,495 [31845311@qtp-11816628-2] INFO BESFactoryImpl
- Creating New Activity
2009-10-23 10:48:32,496 [31845311@qtp-11816628-2] INFO BESFactoryImpl
- BES accepting new activities: true
2009-10-23 10:48:32,574 [31845311@qtp-11816628-2] INFO
BasicTSIFactory - Creating new uspace for
88532791-7a53-4993-b73b-3cc6e3fff940
client: EMAILADDRESS=unicore-support@..., C=DE, O=unicore.eu,
OU=Testing, CN=UNICORE demo user
Xlogin: [user], selected login: user, role: user: role from
authorisation, authenticated using <CONSIGNOR X509v3>
2009-10-23 10:48:32,608 [31845311@qtp-11816628-2] INFO
BESActivityImpl - Initializing BESActivity
<88532791-7a53-4993-b73b-3cc6e3fff940> for client
EMAILADDRESS=unicore-support@..., C=DE, O=unicore.eu,
OU=Testing, CN=UNICORE demo user
Xlogin: [user], selected login: user, role: user: role from
authorisation, authenticated using <CONSIGNOR X509v3>
2009-10-23 10:48:32,683 [31845311@qtp-11816628-2] INFO
PathedStorageImpl - SMS init in
</home/user/setup/UNICORE622/unicorex/data/FILESPACE/88532791-7a53-4993-b73b-3cc6e3fff940/>
2009-10-23 10:48:33,664 [31845311@qtp-11816628-2] INFO BESFactoryImpl
- Getting Activity Statuses
2009-10-23 10:48:34,045 [XNJS-JobRunner-2] ERROR Execution - Could
not properly incarnate
<jsdl1:HPCProfileApplication
xmlns:jsdl1="http://schemas.ggf.org/jsdl/2006/07/jsdl-hpcpa"
xmlns:jsdl="http://schemas.ggf.org/jsdl/2005/11/jsdl"
xmlns:bes="http://schemas.ggf.org/bes/2006/08/bes-factory"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<jsdl1:Executable>/bin/bash</jsdl1:Executable>
<jsdl1:Argument>bes_executable_2</jsdl1:Argument>
<jsdl1:Output>bes_stdout.log</jsdl1:Output>
<jsdl1:Error>bes_stderr.log</jsdl1:Error>
</jsdl1:HPCProfileApplication>,
got
<xml-fragment/>
2009-10-23 10:48:34,045 [XNJS-JobRunner-2] WARN Execution - Failure
in submit.
2009-10-23 10:48:34,046 [XNJS-JobRunner-2] INFO JSDLProcessor -
Action 88532791-7a53-4993-b73b-3cc6e3fff940 FAILED: Could not submit
job: java.lang.Exception: Application could not be mapped to an
executable.
2009-10-23 10:48:34,070 [XNJS-JobRunner-2] ERROR JobRunner - Error
during processing action <88532791-7a53-4993-b73b-3cc6e3fff940>
de.fzj.unicore.xnjs.ems.ProcessingException: Could not submit job:
java.lang.Exception: Application could not be mapped to an executable.
at
de.fzj.unicore.xnjs.jsdl.JSDLProcessor.handlePending(JSDLProcessor.java:268)
at de.fzj.unicore.xnjs.ems.Processor.process(Processor.java:126)
at de.fzj.unicore.xnjs.ems.JobRunner.run(JobRunner.java:123)
Caused by: de.fzj.unicore.xnjs.ems.ExecutionException:
java.lang.Exception: Application could not be mapped to an executable.
at de.fzj.unicore.xnjs.simple.BasicExecution.submit(BasicExecution.java:149)
at
de.fzj.unicore.xnjs.jsdl.JSDLProcessor.handlePending(JSDLProcessor.java:257)
... 2 more
Caused by: java.lang.Exception: Application could not be mapped to an
executable.
at de.fzj.unicore.xnjs.simple.BasicExecution.submit(BasicExecution.java:120)
... 3 more
2009-10-23 10:48:34,120 [XNJS-JobRunner-4] INFO USAGE -
[NOT_SUCCESSFUL] [ null] [ 88532791-7a53-4993-b73b-3cc6e3fff940]
[EMAILADDRESS=unicore-support@..., C=DE, O=unicore.eu,
OU=Testing, CN=UNICORE demo user]

In my client application I use the following versions of jsdl and bes
jar files:
- jsdl-xmlbeans-1.2.jar
- ogsabes-core-1.1.3.jar
- ogsabes-types-1.4.jar

I see you continued to develop this files and use newer versions for
the 6.2.2 server. I don't know if I change to the newer version of jar
files it will solve my problem and also keeps compatible with older
Unicore server versions?

Do you know what could be the reason of this problem and how can I solve it?

Thank you in advance for your help!

Greetings,
Peter Modos

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

UNICORE command line client 6.2.2 release

2009-10-13T03:33:53Z

Dear all,

the next release 6.2.2 of the UNICORE Command line Client is available
for download on SourceForge

<https://sourceforge.net/projects/unicore/files/2%20UNICORE%206%20Clients,%20Applications,%20and%20APIs/2.3%20Commandline%20Client%20(UCC)/6.2.2>

This is a fairly minor release, that nonetheless has a number of
improvements:

- improved commandline editing in "shell" mode
- new "list-storages" command
- bash completion (can be found in the "extras" directory)

as well as a couple of fixes. Please refer to the change log
below for the full list.

The user manual at

http://www.unicore.eu/documentation/manuals/unicore6/ucc/

has detailed documentation and installation instructions.

Changes in Version 6.2.2
************************
- depends on UNICORE 6.2.2 libraries
- bugfix in batch mode (would finish before jobs were all processed)
- new "list-storages" command
- provide commandline editing in shell mode
- add bash completion (in "extras" directory)
- always write job descriptor in batch "submit only" mode

Best regards,
Bernd.

--
Dr. Bernd Schuller
Distributed Systems and Grid Computing
Juelich Supercomputing Centre, http://www.fz-juelich.de/jsc
Phone: +49 246161-8736 (fax -8556)
Personal blog: www.jroller.com/page/gridhaus

------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------

------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Unicore-support mailing list
Unicore-support@...
https://lists.sourceforge.net/lists/listinfo/unicore-support

Re: Changes in TargetSystemFactoryService?

2009-10-09T00:47:36Z

Hi André,

without looking at it, but »DefaultTargetFactorySystem« seems a weird
name. The way you write it, it looks like it should be
TargetSystemFactoryService?res=...

Cheers,
Björn

On 08.10.2009 16:05, André Höing wrote :

> Hi,
>
> I always generated a new TargetSystemService by invoking the
> DefaultTargetFactorySystem?res=default_target_system_factory
>
> But when upgrading from UNICORE 6.2.1 to 6.2.2 I get the following fault:
> <faultstring>Resource 'default_target_system_factory' not found for
> service 'TargetSystemFactoryService'</faultstring>
>
> Can you give me a hint how to create a TargetSystem now?
>
> Thanks,
> André
>

--
Dipl.-Inform. Björn Hagemeier
Juelich Supercomputing Centre
Institute for Advanced Simulation

Phone: +49 2461 61 1584
Fax : +49 2461 61 6656
Email: b.hagemeier@...
Skype: bhagemeier
WWW : http://www.fz-juelich.de/jsc

JSC is the coordinator of the
John von Neumann Institute for Computing
and member of the
Gauss Centre for Supercomputing

Forschungszentrum Juelich GmbH
52425 Juelich

Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDir'in Baerbel Brumme-Bothe
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt

[b_hagemeier.vcf]

begin:vcard fn;quoted-printable:Bj=C3=B6rn Hagemeier n;quoted-printable:Hagemeier;Bj=C3=B6rn org:Juelich Supercomputing Centre;Distributed Systems and Grid Computing adr;quoted-printable:;;;J=C3=BClich;NRW;52425;Germany email;internet:b.hagemeier@... title:Dipl.-Inform. tel;work:+49 2461 61 1584 tel;fax:+49 2461 61 6656 x-mozilla-html:FALSE url:http://www.fz-juelich.de/jsc version:2.1 end:vcard

smime.p7s (5K) Download Attachment