Hey folks, just getting started with DRBD and have built a version of
8.3.5 for testing. We have successfully setup two machines and gotten
up-to-date on both machines with a 50GB partition. To avoid the long
initial sync process we used the 'trunk sync' process outlined in the
documentation. This resulting in our current up-to-date state on
both of our machines. We then decided to add online verification, so
we added the necessary changes to the config files on both machines
(using SHA1) and 'adjusted' both sides. I then started the
verification and we do have progress, but after nearly 15-20 hours we
are only 26% complete. It seems like this should be something that
runs quickly (I think the manual mentioned running this as a cron job
daily) and with our relatively small volume this seems to be taking a
long time. Both machines are showing about 25-30Mhz CPU usage and
13KBps of network usage (of ~300MB/s). Disk usage is virtually non-
existant.
Any ideas why this process is taking such a long time would be
appreciated. Thanks in advance for your assistance.
Mike
_______________________________________________
drbd-user mailing list
drbd-user@...
http://lists.linbit.com/mailman/listinfo/drbd-user
