Nabble - WebTest

[webtest][JIRA] Closed: (WT-547) Generate single HTML reports of finished tests while other tests are running

2009-11-05T06:19:57Z

[ http://webtest-community.canoo.com/jira/browse/WT-547?page=all ]

Marc Guillemot closed WT-547:
-----------------------------

Fix Version: Future work
Resolution: Fixed

Implemented in build 1790

> Generate single HTML reports of finished tests while other tests are running
> ----------------------------------------------------------------------------
>
> Key: WT-547
> URL: http://webtest-community.canoo.com/jira/browse/WT-547
> Project: WebTest
> Type: New Feature

> Versions: 3.0
> Reporter: Marc Guillemot
> Assignee: Marc Guillemot
> Fix For: Future work

>
> HTML reports are currently generated when all tests are finished. Each single report could be generated in a separated thread just once the corresponding test is finished.
> This would have two benefits:
> - it would be possible to look at reports of finished single tests while the whole suite is still running
> - it would probably save a bit time: no report will need to be generated at the end of the suite and the time consumed in parallel will probably not impact the tests as WebTest waits often for answers of the application under test (assuming it is not on the same machine).

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://webtest-community.canoo.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see:
http://www.atlassian.com/software/jira

_______________________________________________
WebTest mailing list
WebTest@...
http://lists.canoo.com/mailman/listinfo/webtest

JavaScript error: ...com.gargoylesoftware.htmlunit.ScriptException: ReferenceError: "ScriptEngineMajorVersion" is not defined.

2009-11-04T01:02:34Z

Hi,

WebTest seems to have a problem with JavaScript that is executed when I click this link on my page:

<SCRIPT LANGUAGE=javascript>function showHelp(document) {

url = '/product/doc/help/'+document; helpWindow=window.open(url,"ProductHelp","height=600,width=700,menubar=no,location=no,status=no,titlebar=yes,toolbar=no,scrollbars=yes,resizable=yes"); helpWindow.focus();}

</SCRIPT>

I get this runtime exception:

“JavaScript error loading page http://server.com:7780/product/doc/help/StandardUser/section.html?Su_Intro_ProductHomePage.html: Wrapped com.gargoylesoftware.htmlunit.ScriptException: ReferenceError: "ScriptEngineMajorVersion" is not defined.”

From the console output WebTest’s last actions were:

[…]

[invoke] INFO (com.canoo.webtest.engine.WebClientContext) - Current response now: http://server.com:7780/product/doc/help/StandardUser/section.html?Su_Intro_ProductHomePage.html

[invoke] WARN (com.gargoylesoftware.htmlunit.html.HtmlPage) - Expected content type of 'application/javascript' or 'application/ecmascript' for remotely loaded JavaScript element at 'http://server:7780/product/doc/help/html_extras/header.js', but got 'application/x-javascript'.

[invoke] INFO (com.canoo.webtest.engine.WebClientContext) - Content of window changed to http://server.com:7780/product/doc/help/StandardUser/html/header.html (text/html)

[invoke] INFO (com.canoo.webtest.engine.WebClientContext) - Content of frame window has changed without javascript while enclosing page is loading, it will NOT become current response

[invoke] INFO (com.canoo.webtest.engine.WebClientContext) - Content of window changed to http://server.com:7780/product/doc/help/StandardUser/html/blank.html (text/html)

[invoke] INFO (com.canoo.webtest.engine.WebClientContext) - Content of frame window has changed without javascript while enclosing page is loading, it will NOT become current response

[invoke] WARN (com.gargoylesoftware.htmlunit.html.HtmlPage) - Expected content type of 'application/javascript' or 'application/ecmascript' for remotely loaded JavaScript element at 'http://server.com:7780/product/doc/help/html_extras/highlight.js', but got 'application/x-javascript'.

[…]

Is there a problem with “remotely loaded JavaScript”?

I’d appreciate any help or hint.

Thanks a lot

Michael Zwick

jwebunit: How do I set the environment from the server side?

2009-11-03T12:31:52Z

Hi,

I'm using the latest version of JWebUnit with Java 1.5 on Mac OS 10.5.6. I have written a bunch of JWebUnit tests, and I want to run one test in which some session properties on the server side change. I would prefer a programmatic way to do this as opposed to having to stop my tests, change something on the server side, re-start my test, change things back, and then continue.

Does anyone have any guidance here? My web/app container is Resin 3.0.19 if that's helpful.

Thanks, - Dave

[webtest][JIRA] Created: (WT-547) Generate single HTML reports of finished tests while other tests are running

2009-11-02T04:41:47Z

Generate single HTML reports of finished tests while other tests are running
----------------------------------------------------------------------------

Key: WT-547
URL: http://webtest-community.canoo.com/jira/browse/WT-547
Project: WebTest
Type: New Feature

Versions: 3.0
Reporter: Marc Guillemot
Assigned to: Marc Guillemot

HTML reports are currently generated when all tests are finished. Each single report could be generated in a separated thread just once the corresponding test is finished.
This would have two benefits:
- it would be possible to look at reports of finished single tests while the whole suite is still running
- it would probably save a bit time: no report will need to be generated at the end of the suite and the time consumed in parallel will probably not impact the tests as WebTest waits often for answers of the application under test (assuming it is not on the same machine).

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://webtest-community.canoo.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see:
http://www.atlassian.com/software/jira

_______________________________________________
WebTest mailing list
WebTest@...
http://lists.canoo.com/mailman/listinfo/webtest

failed compiling latest revision from trunk

2009-10-30T03:23:24Z

Hello,

I'm trying to build webtest from the latest version at the Subversion repository, as described on the "Building" page. I use a external installation of Ant-1.7.1, running inside Cygwin on MS Windows. I have the same problem without Cygwin as well.

The build itself prints following "strange" messages:

-generateTaskdef:
[templatedoclet] INFO (xdoclet.XDocletMain.start) - Running <template/>
[templatedoclet] Error parsing File c:\external\canoo-webtest-trunk\webtest\src\main\java\com\canoo\webtest\engine\xpath\XPathHelper.java:Encountered "<" at line 51, column 26.
[templatedoclet] Was expecting one of:
[templatedoclet]     <IDENTIFIER> ...
[templatedoclet]     "[" ...
[templatedoclet]     "." ...
[templatedoclet]
[templatedoclet] Error parsing File c:\external\canoo-webtest-trunk\webtest\src\main\java\com\canoo\webtest\engine\Context.java:Encountered "<" at line 38, column 20.
[templatedoclet] Was expecting one of:
[templatedoclet]     <IDENTIFIER> ...
[templatedoclet]     "[" ...
[templatedoclet]     "." ...
[templatedoclet]     "(" ...
[templatedoclet]

And it finally aborts because it fails to find the commons-lang library:

fetchDependencies:
[artifact:dependencies] [INFO] snapshot net.sourceforge.htmlunit:htmlunit:2.7-SNAPSHOT: checking for updates from htmlUnitSnapshots
[artifact:dependencies] [WARNING] repository metadata for: 'snapshot net.sourceforge.htmlunit:htmlunit:2.7-SNAPSHOT' could not be retrieved from repository: htmlUnitSnapshots due to an error: Error transferring file
[artifact:dependencies] [INFO] Repository 'htmlUnitSnapshots' will be blacklisted
[artifact:dependencies] Downloading: net/sourceforge/htmlunit/htmlunit/2.7-SNAPSHOT/htmlunit-2.7-SNAPSHOT.pom
[artifact:dependencies] Downloading: net/sourceforge/htmlunit/htmlunit-core-js/2.7-SNAPSHOT/htmlunit-core-js-2.7-SNAPSHOT.pom
Trying to override old definition of task groovy
Trying to override old definition of task groovyc

-compile:
    [mkdir] Created dir: c:\external\canoo-webtest-trunk\webtest\build\classes\plain
    [mkdir] Created dir: c:\external\canoo-webtest-trunk\webtest\deploy\plain
     [echo] compile base classes
    [javac] Compiling 294 source files to c:\external\canoo-webtest-trunk\webtest\build\classes\plain
    [javac] c:\external\canoo-webtest-trunk\webtest\src\main\java\com\canoo\webtest\ant\CountWebtestResults.java:8: package org.apache.commons.lang does not exist
    [javac] import org.apache.commons.lang.StringUtils;

Someone any idea what I'm doing wrong?

http://webtest.canoo.com/webtest/manual/building.html

http://www.mail-archive.com/webtest@.../msg07185.html

Many thanks!

Tung

[webtest][JIRA] Closed: (WT-546) Provide source information for each step

2009-10-29T11:54:42Z

[ http://webtest-community.canoo.com/jira/browse/WT-546?page=all ]

Marc Guillemot closed WT-546:
-----------------------------

Fix Version: Future work
Resolution: Fixed

Implemented in build 1788.

The information is made available as title attribute of the element representing the step name meaning that it is displayed by placing the mouse pointer on the step name.

> Provide source information for each step
> ----------------------------------------
>
> Key: WT-546
> URL: http://webtest-community.canoo.com/jira/browse/WT-546
> Project: WebTest
> Type: New Feature

> Versions: 3.0
> Reporter: Marc Guillemot
> Assignee: Marc Guillemot
> Fix For: Future work

>
> It would be useful to see in report for each step from which source file (and line) it comes

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://webtest-community.canoo.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see:
http://www.atlassian.com/software/jira

_______________________________________________
WebTest mailing list
WebTest@...
http://lists.canoo.com/mailman/listinfo/webtest

[webtest][JIRA] Created: (WT-546) Provide source information for each step

2009-10-28T08:31:20Z

Provide source information for each step
----------------------------------------

Key: WT-546
URL: http://webtest-community.canoo.com/jira/browse/WT-546
Project: WebTest
Type: New Feature

Versions: 3.0
Reporter: Marc Guillemot
Assigned to: Marc Guillemot

It would be useful to see in report for each step from which source file (and line) it comes

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://webtest-community.canoo.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see:
http://www.atlassian.com/software/jira

_______________________________________________
WebTest mailing list
WebTest@...
http://lists.canoo.com/mailman/listinfo/webtest

about coverage for the tests

2009-10-27T23:26:18Z

I would like to know whether coverage on the tests run can be generated using any coverage plug-in tools.

Thanks

Pramod

"This email and any files transmitted with it contain confidential, proprietary, 
privileged information of Symphony Services Corp (India) Pvt. Ltd. and are intended 
solely for the use of the recipient/s to whom it is addressed. Any unauthorized 
notifying, copying or distributing of this e-mail, directly or indirectly, and the 
contents therein in full or part is prohibited by any entity who is not a recipient. 
Any email received inadvertently or by mistake should be deleted by the entity who 
is not a recipient thereof. You may be pleased to notify the sender immediately by 
email and the email should be deleted from your system".

applet testing

2009-10-26T21:08:46Z

Hi,

I need to test a application which uses applets. I have url to access the application and applets and swing components are embedded in the application. I had recorded the application on firefox using "WebTestRecorder SideBar". But the actions are not able to record on applet application. Works fine for HTML application.

Please let me know how to do the applet application testing using canoo web test.

Thanks in advance.

How to do proxy setting in canoo webtest

2009-10-26T21:05:29Z

Hi,

I am not able to run the tests for external sites like google.com and others. I read and found we need to do some proxy setting in build.xml file. I have specified the proxy setting but still getting the error. Please let me know how to specify the proxy setting to run on external websites.

Thanks in advance.

RE: (no subject)

2009-10-26T04:51:22Z

Yes there is: look at the storeXPath step. You might also want to look at an xpath manual (http://www.w3.org/TR/xpath) and download “Webtest recorder” for testing your xpath-expressions.

-----Original Message-----
From: webtest-admin@... [mailto:webtest-admin@...] On Behalf Of lavanya palaniswamy
Sent: maandag 26 oktober 2009 12:36
To: webtest@...
Subject: [Webtest] (no subject)

Hi All,
Can any one help me in capturing dynamic content.
My project is designed in a way that
each time i login dynamic numeric content appears.
Is there any way to capture that numeric content?

Thanks in Advance
Lavanya

Yahoo! India has a new look. Take a sneak peek.

(no subject)

2009-10-26T04:36:29Z

Yahoo! India has a new look. Take a sneak peek.

Page action while setting an input field

2009-10-26T00:51:20Z

Hi,

I have a situation where a page action is executed whilst just setting an input field.

This is (part of) the script:

…

<setInputField

description="GoodsReceiptSearch.toNo_transportOrderLineNr="

name="transportOrderLineNr"

value="01"

<verifyTitle

regex="true"

text=".*Goods Receipt Search"

…

The log file shows the following:

…

[setInputField] INFO (com.canoo.webtest.steps.Step) - >>>> Start Step: setInputField "GoodsReceiptSearch.toNo_transportOrderLineNr=" (489/670)

[setInputField] INFO (com.canoo.webtest.steps.form.AbstractSetFieldStep) - Found 1 suitable fields, considering only the first one

[setInputField] WARN (com.gargoylesoftware.htmlunit.html.HtmlScript) - <script for='document' ...>: no element found with id "document". Ignoring.

[setInputField] INFO (com.canoo.webtest.engine.WebClientContext) - Content of window changed to http://172.21.0.132:9080/receipt_detail.jsp (text/html)

[setInputField] INFO (com.canoo.webtest.engine.WebClientContext) - Content of current window changed, it will become current response

[setInputField] INFO (com.canoo.webtest.engine.WebClientContext) - Current form set to none

[setInputField] INFO (com.canoo.webtest.engine.WebClientContext) - Current response now: http://172.21.0.132:9080/receipt_detail.jsp

[verifyTitle] INFO (com.canoo.webtest.steps.Step) - >>>> Start Step: verifyTitle (490/670)

…

I don’t know exactly how to read this, but I don’t understand the 3^rd line. Might this be the reason why the content of the window changes? Any idea what I can do about it?

Many thanks!

David

Re: RE: WebTest and htmlUnit

2009-10-23T08:57:41Z

Hi,

it's not the same abstraction level: HtmlUnit is low level whereas
WebTest works at a higher level, allowing to write concise tests and to
get rich reports.

Cheers,
Marc.
--
Web: http://www.efficient-webtesting.com
Blog: http://mguillem.wordpress.com

Chad Bellan wrote:

> I noticed that htmlUnit is included in WebTest. Is there any advantage
> to using WebTest over using only htmlunit?
>
>
>
> Chad
>
>
>
>
>
> *Chad Bellan*
>
> *LUSIGHT RESEARCH*
>
> t. +1.416.934.7253
>
> chad.bellan@... <mailto:chad.bellan@...>
>
>
>
> Please visit us at www.lusight.com <http://www.lusight.com/>
>
>
>
> This message is confidential and may be privileged. If you are not the
> intended recipient, we kindly ask you to inform the sender. Any
> un-authorized dissemination or copying hereof is prohibited. This
> message serves for information purposes only and shall not have any
> legally binding effect. Given that e-mails can easily be subject to
> manipulation, we can not accept any liability for the content provided.
>
>
>
>
>

_______________________________________________
WebTest mailing list
WebTest@...
http://lists.canoo.com/mailman/listinfo/webtest

RE: WebTest and htmlUnit

2009-10-23T08:53:16Z

I noticed that htmlUnit is included in WebTest. Is there any advantage to using WebTest over using only htmlunit?

Chad

Chad Bellan

LUSIGHT RESEARCH

t. +1.416.934.7253

chad.bellan@...

Please visit us at www.lusight.com

This message is confidential and may be privileged. If you are not the intended recipient, we kindly ask you to inform the sender. Any un-authorized dissemination or copying hereof is prohibited. This message serves for information purposes only and shall not have any legally binding effect. Given that e-mails can easily be subject to manipulation, we can not accept any liability for the content provided.

[webtest][JIRA] Closed: (WT-545) Add possibility to load dynamic properties from a file

2009-10-23T07:27:56Z

[ http://webtest-community.canoo.com/jira/browse/WT-545?page=all ]

Marc Guillemot closed WT-545:
-----------------------------

Resolution: Fixed

Implemented in build 1787.

> Add possibility to load dynamic properties from a file
> ------------------------------------------------------
>
> Key: WT-545
> URL: http://webtest-community.canoo.com/jira/browse/WT-545
> Project: WebTest
> Type: New Feature

> Reporter: Marc Guillemot
> Assignee: Marc Guillemot

>
> Add something like Ant's <property file="myPropertyFile.properties"/> for WebTest dynamic properties.

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://webtest-community.canoo.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see:
http://www.atlassian.com/software/jira

_______________________________________________
WebTest mailing list
WebTest@...
http://lists.canoo.com/mailman/listinfo/webtest

[webtest][JIRA] Created: (WT-545) Add possibility to load dynamic properties from a file

2009-10-23T06:44:56Z

Add possibility to load dynamic properties from a file
------------------------------------------------------

Key: WT-545
URL: http://webtest-community.canoo.com/jira/browse/WT-545
Project: WebTest
Type: New Feature

Reporter: Marc Guillemot
Assigned to: Marc Guillemot

Add something like Ant's <property file="myPropertyFile.properties"/> for WebTest dynamic properties.

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://webtest-community.canoo.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see:
http://www.atlassian.com/software/jira

_______________________________________________
WebTest mailing list
WebTest@...
http://lists.canoo.com/mailman/listinfo/webtest

Ajax calls and IFrame

2009-10-22T21:33:47Z

Hi,

I have the following scenario which is not working in webtest. Can you please let me know how to handle this?

OnButtonClick(){

Change the src attribute of IFrame. This is used to record the history in the browser. This triggers a HTTP Get to a static page
Send a HTTP request using XMLHttpRequest object

}

Webtest considers the HTTP Get response triggered by IFrame as the response of OnButtonClick. It ignores the response from the XMLHTTPRequest object.
Any idea how to fix this?

BTW I'm using : R_1786

Thanks,
Haneef

-----Original Message-----
From: webtest-admin@... [mailto:webtest-admin@...] On Behalf Of Marc Guillemot
Sent: Monday, October 12, 2009 11:13 PM
To: webtest@...
Subject: Re: [Webtest] Problem using Webtest and DOM tree's

Hi,

instead of sleeping or retrying, you can use
<config easyajax="true"/>
which works fine for a lot of AJAX libraries... but not all :-(

Cheers,
Marc.

Soula, William a écrit :

> Thanks Stephan for the example for:
>>Taken a step farther you can make a macro that takes an element and do a
> retry on the element sleeping between retries. Then all you >have to do
> is pass a verifyXPath step for whatever will load with ajax to the macro
> and it will keep trying till it is loaded.
>
> Truly examples are better than sentences, so, I'll include mine as it is
> a little different than Stephan's:
> <macrodef name="ajaxLoad">
> <element name="value" implicit="yes"/>
> <sequential>
> <retry maxcount="30">
> <sleep seconds="1"/>
> <value/>
> </retry>
> </sequential>
> </macrodef>
>
> <ajaxLoad>
> <verifyXPath xpath="//table[@id='ajaxLoadTable']"
> description="Wait for ajax to load"/>
> </ajaxLoad>
>
> This way you can also use webtest steps to verify when ajax is loaded so
> you could do:
> <ajaxLoad>
> <verifyInputField name="valueSetWithAjax" value="100"
> description="Wait for ajax to load"/>
> </ajaxLoad>
> --------------------------------------------------------
>
> Hi,
>
> On Thu, Oct 08, 2009 at 02:44:55PM -0500, Soula, William wrote:
>> Is it possible this stuff is created using ajax for you guys? If so
>> you can use a sleep to wait for it to load and then check it with
>> xpath.
>
> Instead of sleeping a certain time you can do the check in a loop and
> sleep one second only. That saves you time if your request is a lot
> shorter that the aproximated 5 seconds and also if a request hangs once
> you wont get a failure.
>
> I use this macro to check for an xpath that must be exist after the
> response from an ajax call was reveived:
>
> <macrodef name="checkAjaxResponseXpathRegex" description="check
> response of an ajax request">
> <attribute name="description" />
> <attribute name="xpath" />
> <attribute name="regex" />
> <sequential>
> <retry maxcount="10">
> <sleep seconds="1"/>
> <verifyXPath
> description="@{description}"
> xpath="@{xpath}"
> regex="@{regex}"
> />
> </retry>
> </sequential>
> </macrodef>
>
> Inside the webtest I do this:
>
> <setSelectField
> description="Select some value"
> xpath="//select[@id='some_id']"
> value="some_val"
> />
> <checkAjaxResponseXpathText
> description="check result after ajax call"
> xpath="//div[@id='some_id']/ol/li[4]/a"
> text="Sometext"
> />
>
> With this mechanism I can test most of the Ajax stuff inside a page
> that changes the DOM tree when the response is received.
>
> Best regards, Stephan
> _______________________________________________
> WebTest mailing list
> WebTest@...
> http://lists.canoo.com/mailman/listinfo/webtest

_______________________________________________
WebTest mailing list
WebTest@...
http://lists.canoo.com/mailman/listinfo/webtest
_______________________________________________
WebTest mailing list
WebTest@...
http://lists.canoo.com/mailman/listinfo/webtest

TypeError: Cannot set property "value" of undefined to "0"

2009-10-20T21:02:24Z

my canoo webtest version is R_1786 Posted: 15-Oct-2009 13:17

when I click a button it says:

Details

javascript errorTypeError: Cannot set property "value" of undefined to "0"
line0
javascript sourcefunction () { [native code, arity=0] }
failing linefunction () {
javascript call stackTypeError: Cannot set property "value" of
undefined to "0" at (onclick event for HtmlSubmitInput[<input
type="submit" value="ok" class="b"
onclick="document.f1.pic.value=1;document.f1.clk.value=0;"
tabindex="2">] in http://www.mysite.com/)

Html source:
<input class="b" type="submit" tabindex="2"
onclick="document.f1.pic.value=1;document.f1.clk.value=0;"
value="进入词条"/>

<script type="text/javascript">var
options={onconfirm:function(D,A,H,C){var
E=document.f1;E.pic.value=1;if(!G("sug_clk")){if(A>=0){var
I=document.createElement("INPUT");I.type="hidden";I.name="clk";I.id="sug_clk";I.value=1;E.appendChild(I)}}else{if(A>=0){G("sug_clk").value=1}}if(!G("sug_rsp")){var
B=document.createElement("INPUT");B.type="hidden";B.name="rsp";B.id="sug_rsp";B.value=A;E.appendChild(B)}else{G("sug_rsp").value=A}E.submit()},getData:function(B){if(navigator.cookieEnabled&&!getCookie("baikesug")){var
C=document.f1;if(!G("sug_oq")){var
D=document.createElement("INPUT");D.type="hidden";D.name="oq";D.id="sug_oq";D.value=B;C.appendChild(D)}else{G("sug_oq").value=B}var
A=document.getElementById("baikeSugSc");if(A){document.body.removeChild(A)}var
A=document.createElement("script");A.src="http://baike.sug.baidu.com/su?wd="+encodeURIComponent(B)+"&t="+(new
Date()).getTime();A.id="baikeSugSc";document.body.appendChild(A)}},append_html:"<div
class='sug_close'><a href='javascript:void(0)'
onclick=baikeSug.close();sendStat('sugclose')>close</a></div>"};var
baikeSug={};function suggestion(){if(!navigator.cookieEnabled){return
false}if(!getCookie("baikesug")){baikeSug=baidu.suggestion.create(baidu.G("kw"),options);baikeSug.close=function(){baikeSug.hide();baidu.G("kw").setAttribute("autocomplete","on");setCookie("baikesug","1","","/",location.host.replace(/:\d+/,""))}}}suggestion();baidu.sug=function(D){if(!D){return
}var C=[];for(var A=0;A<D.s.length;A++){var
E={};E.input=B(D.s[A]);E.selection=D.s[A];C.push(E)}baikeSug.giveData(D.q,C);function
B(I){var H=document.createElement("textarea");try{H.innerHTML=I}catch(F){H.value=I}return
H.value}};</script>
_______________________________________________
WebTest mailing list
WebTest@...
http://lists.canoo.com/mailman/listinfo/webtest

[webtest][JIRA] Created: (WT-544) JavaScript error testing ICEfaces application

2009-10-20T16:02:41Z

JavaScript error testing ICEfaces application
---------------------------------------------

Key: WT-544
URL: http://webtest-community.canoo.com/jira/browse/WT-544
Project: WebTest
Type: Bug

Versions: 3.0
Environment: ICEfaces 1.8.2, WebTest 3.0
Reporter: Kennard Consulting

Hi guys.

First, thanks for a great product in WebTest. It has really helped me thoroughly test my applications!

I get the following error when trying to WebTest my ICEfaces application...

net.sourceforge.htmlunit.corejs.javascript.JavaScriptException: TypeError: Cannot read property "length" from undefined (http://localhost:8080/penguincolony-faces/xmlhttp/1256079339140/icefaces-d2d.js#4)

I have a small reproducible test case for this. Please download the Metawidget source distribution from http://metawidget.org. In its 'test/build.xml' Ant script, run the target 'test-faces-penguincolony'. The test should pass, but only because there is a small hack in the WebTest script.

If you go into the WebTest script and remove the hack, that is the 4 lines:



<clickButton label="Back"/>
<clickLink xpath="/html/body/div[@id='content']/form/table/tbody/tr[2]/td[3]/a"/>



...then you should see the error I am referring to.

Regards,

Richard.

--
This message is automatically generated by JIRA.
-
If you think it was sent incorrectly contact one of the administrators:
http://webtest-community.canoo.com/jira/secure/Administrators.jspa
-
For more information on JIRA, see:
http://www.atlassian.com/software/jira

_______________________________________________
WebTest mailing list
WebTest@...
http://lists.canoo.com/mailman/listinfo/webtest

Canoo, ANT SQL and macrodef

2009-10-20T08:08:14Z

Hi,

I use Canoo Webtest (R_1766).
I want to use the SQL script for testing. The SQL script has to be
called from macro, because I need to do block of commands before I start
SQL script and a next block of commands after SQL script. And I use the
macro (macrodef) like a method with parameters. These parameters are
very good benefits. At least for me.;)

But I see that there are some problems. I attached example (sorry if the
are more bugs in examples). But I think it may help.

The idea of code (very simpleexample) is :
1. create property (e.g user name)
2. start macro with parameter of property; the macro should:
2a. display parameter using echo
2b. call the SQL script (oracle PLSQL) where I use parameter from macro
2c. display the result of sql script.

But I see that the step 2a. - echo displays the parameter
@{myInformation}, but the ANT SQL has problem with it.
It seems to me that I can use ${variable}, but not the variable
@{variable} in SQL script called using SCR.

I got the exception:
Caused by: C:\Program
Files\Eclipse\workspaceExpersoft\pm1-jTests\modules\!EXAMPLE\load_sql_script.xml:21:
java.sql.SQLException: Unsupported token SQL92 on position: 209:
myInformation
at org.apache.tools.ant.taskdefs.SQLExec.execute(SQLExec.java:454)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor2.invoke(Unknown Source)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at
org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at
com.canoo.webtest.steps.AbstractStepContainer.executeContainedStep(AbstractStepContainer.java:72)
at
com.canoo.webtest.steps.AbstractStepContainer.executeContainedSteps(AbstractStepContainer.java:80)
at com.canoo.webtest.steps.control.GroupStep.doExecute(GroupStep.java:14)
at com.canoo.webtest.steps.Step.execute(Step.java:103)
... 83 more

The added files should be in folders:
\cases\!EXAMPLE\sql_example.xml
\modules\!EXAMPLE\load_sql_script.xml
\modules\!EXAMPLE\select_simle.sql
\modules\!EXAMPLE\set_data_sql.xml

Regards,
Martin

<?xml version="1.0"?>
<!DOCTYPE project [
<!ENTITY config SYSTEM "../../config/config.xml">
<!ENTITY set_data_sql SYSTEM "../../modules/!EXAMPLE/set_data_sql.xml">
<!ENTITY load_sql_script SYSTEM "../../modules/!EXAMPLE/load_sql_script.xml">
]>
<project name="SQL" default="case" basedir="..">
<import file="${webtest.home}/lib/taskdef.xml"/>
<target name="case">
<echo>SQL EXAMPLE</echo>
<webtest name="SQL EXAMPLE">
&config;
<steps>
&set_data_sql;
&load_sql_script;

<call_sql myInformation="${data1}"/>
<call_sql myInformation="${data2}"/>

</steps>
</webtest>
</target>
</project>


<macrodef name="call_sql"
description="This just call an SQL">
<attribute name="myInformation" default="MY_DATA_INFO" />

<sequential>

<echo message="Into the macro was sent: @{myInformation}" />

<antWrapper>
<sql
driver="${driver}"
url="${url}"
userid="${login.superuser.account}"
password="${login.superuser.password}"
onerror="stop"
delimitertype = "row"
delimiter="/"
output="modules/!EXAMPLE/output.txt"
print="true"
>
<transaction src="modules/!EXAMPLE/select_simle.sql" />
</sql>
</antWrapper>

<invoke
description="Go to Portfolio-Masterdata"
url="modules/!EXAMPLE/output.txt"/>

</sequential>
</macrodef>

DECLARE
tmpDATA1 VARCHAR2(10);
tmpDATA2 VARCHAR2(10);
tmpMyInformation VARCHAR2(10);
BEGIN

SELECT ${data1} INTO tmpDATA1 from dual;
SELECT ${data2} INTO tmpDATA2 from dual;
SELECT @{myInformation} INTO tmpMyInformation from dual;

create table example (
id INT UNSIGNED PRIMARY KEY AUTO_INCREMENT,
name VARCHAR2(10)
);

insert into examle (name) value (tmpDATA1);
insert into examle (name) value (tmpDATA2);
insert into examle (name) value (tmpMyInformation);

END;

select * from example;

drop table exaple;

<condition property="data1" value="DATA_0001">
<not>
<isset property="data1"/>
</not>
</condition>

<condition property="data2" value="DATA_0002">
<not>
<isset property="data2"/>
</not>
</condition>

Caused by: C:\Program Files\Eclipse\workspaceExpersoft\pm1-jTests\modules\!EXAMPLE\load_sql_script.xml:21: java.sql.SQLException: Unsupported token SQL92 on position: 209: myInformation
at org.apache.tools.ant.taskdefs.SQLExec.execute(SQLExec.java:454)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor2.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at com.canoo.webtest.steps.AbstractStepContainer.executeContainedStep(AbstractStepContainer.java:72)
at com.canoo.webtest.steps.AbstractStepContainer.executeContainedSteps(AbstractStepContainer.java:80)
at com.canoo.webtest.steps.control.GroupStep.doExecute(GroupStep.java:14)
at com.canoo.webtest.steps.Step.execute(Step.java:103)
... 83 more
Caused by: java.sql.SQLException: Unsupported token SQL92 on position: 209: myInformation
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
at oracle.jdbc.driver.OracleSql.handleToken(OracleSql.java:1165)
at oracle.jdbc.driver.OracleSql.handleODBC(OracleSql.java:1064)
at oracle.jdbc.driver.OracleSql.parse(OracleSql.java:984)
at oracle.jdbc.driver.OracleSql.getSql(OracleSql.java:312)
at oracle.jdbc.driver.OracleSql.getSqlBytes(OracleSql.java:557)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:193)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:946)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1169)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:1688)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1654)
at org.apache.tools.ant.taskdefs.SQLExec.execSQL(SQLExec.java:564)
at org.apache.tools.ant.taskdefs.SQLExec.runStatements(SQLExec.java:539)
at org.apache.tools.ant.taskdefs.SQLExec$Transaction.runTransaction(SQLExec.java:781)
at org.apache.tools.ant.taskdefs.SQLExec$Transaction.access$000(SQLExec.java:707)
at org.apache.tools.ant.taskdefs.SQLExec.execute(SQLExec.java:438)
... 93 more

WebTest and htmlUnit

2009-10-20T07:23:56Z

I noticed that htmlUnit is included in WebTest. Is there any advantage to using WebTest over using only htmlunit?

Chad

Chad Bellan

LUSIGHT RESEARCH

t. +1.416.934.7253

chad.bellan@...

Please visit us at www.lusight.com

Re: Unable to test Pages that use JavaScript

2009-10-20T06:18:53Z

I send you the Js that is failling so that it can be included as a fix:

page: www.olx.com
error:JavaScript error loading page http://www.olx.com/: SyntaxError: illegal character (http://static04.olx.com/js/compressed/protoculous.compressed-31.js#1(eval)#1)

SyntaxError: illegal character (http://static04.olx.com/js/compressed/protoculous.compressed-31.js#1(eval)#1) at (http://static04.olx.com/js/compressed/protoculous.compressed-31.js:1)

Go to this url: http://static04.olx.com/js/compressed/protoculous.compressed-31.js

I hope it helps

2009/10/19 Hernan Castagnola <castagnolah@...>

I have been using webtest for a while disabling JS beacuse of the error that returns.
Right now I must test some stuff that is being loaded by a js funcition:

1var xhReq;
2var dtDate = new Date();
3var surl = '/ajax/sessioninfo.php?rnd=' + dtDate.getSeconds() + '&slc=' + language_id + '&nfwk=1';
4
5if (window.XMLHttpRequest)
6 xhReq = new XMLHttpRequest();
7else
8 xhReq = new ActiveXObject("Microsoft.XMLHTTP");
9
10xhReq.open("GET", surl, false);
11xhReq.send(null);
12document.getElementById('my_olx').innerHTML = xhReq.responseText;

But as I have the following step :
ant.enableJavaScript enable:"false"

when I do the invoke step the inner html under "my_olx" is not being loaded. So I can't test it.

I tried enabling the js and simulating IE7 and FF3 without any success. I still get the error. I must enable it because I need that inner html to be loaded.

does anyone succeed testing web pages that uses js with webtest?

This is the site I am testing: www.olx.com

Thanks in advance,

Hernan

FW: RE: error: request header to long

2009-10-20T05:59:48Z

Van: Niels Stevens
Verzonden: dinsdag 20 oktober 2009 14:27
Aan: 'Ahmed Ashour'
Onderwerp: RE: [Webtest] RE: error: request header to long

The problem occurs for more than one request, but this is the url for the bad request below: http://83.219.86.68/is-bin/INTERSHOP.enfinity/WFS/KPN-B2B-Site/nl_NL/-/EUR/ViewCurrentReq-Edit is wat it looks like manually, below is webtests version

Van: Ahmed Ashour [mailto:asashour@...]
Verzonden: dinsdag 20 oktober 2009 14:07
Aan: webtest@...; Niels Stevens
Onderwerp: Re: [Webtest] RE: error: request header to long

Dear Niels,

Please submit your full URL as you are doing in real browsers, in order to compare the request sent by IE/FF in one side, and what WebTest uses.

Yours,

Ahmed

----
Blog: http://asashour.blogspot.com

From: Niels Stevens <niels.s@...>
To: "webtest@..." <webtest@...>
Sent: Tue, October 20, 2009 2:47:31 PM
Subject: [Webtest] RE: error: request header to long

UPDATE:

This is the resulting page:

Bad Request

Your browser sent a request that this server could not understand.
Size of a request header field exceeds server limit.

Cookie: sid=e6ofWeIwVuEeWajt2fN6WErwhGPNuB35qUs=; s_pers=%20s_camp%3D%255B%255B%2527ref%25253A192.168.1.101%25253A80/mobiel/mobiel_Telefoons/Nokia-E75.prod%25253Bsid%25253De6ofWeIwVuEeWajt2fN6WErwhGPNuB35qUs%25253D%2527%252C%25271256039018358%2527%255D%255D%7C1413805418358%3B%20s_ev30%3D%255B%255B%2527Other%252520Websites%2527%252C%25271256039018374%2527%255D%255D%7C1413805418374%3B%20s_ev32%3D%255B%255B%2527%25255BOther%252520Websites%25255D%2527%252C%25271256039018374%2527%255D%255D%7C1413805418374%3B; s_sess=%20s_cc%3Dtrue%3B%20cmm%3D%257Bchannel%253A%2527Other%2520Websites%2527%252Ckeyword%253A%2527n/a%2527%252Cpartner%253A%2527Other%2520Websites%2527%252Creferrer%253A%2527http%253A//192.168.1.101%253A80/mobiel/mobiel_Telefoons/Nokia-E75.prod%253Bsid%253De6ofWeIwVuEeWajt2fN6WErwhGPNuB35qUs%253D%253FSpeechUUID%253D2D8KVX4EFGYAAAEj6VMqs74j%2526SpeechCategoryName%253Dbs_speech_subscription%2526DataUUID%253D8acKVX4Em9kAAAEj704qs74j%2527%252CcampaignId%253A%2527n/a%2527%252C%250Afunction%2520%2528it … and so on for a really long time

The error message at the bottom of the testresult is:

Unexpected exception caught: java.net.SocketException, Connection reset

Van: webtest-admin@... [mailto:webtest-admin@...] Namens Niels Stevens
Verzonden: dinsdag 20 oktober 2009 10:02
Aan: webtest@...
CC: Dirk van Zonhoven
Onderwerp: [Webtest] error: request header to long

Hi all,

I have a problem with a site, where canoo gives the error “request header to long” in multiple places. (the same site on other environments/servers doesn’t have this problem). Upon submitting these requests manually there also is no problem. The requestheader returned by canoo in the errormessage, seems to contain a lot of encoding characters like %%66%%...... Has anyone seen this problem before?

Groeten,

Niels Stevens

Jr. Developer

Making eBusiness profitable

T: +32 (0)11/565.012
F: +32 (0)11/201.884

website: www.softlution.com

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.422 / Virus Database: 270.14.21/2445 - Release Date: 10/19/09 14:33:00

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.422 / Virus Database: 270.14.21/2445 - Release Date: 10/20/09 03:55:00

Re: RE: error: request header to long

2009-10-20T05:06:36Z

Dear Niels,

Please submit your full URL as you are doing in real browsers, in order to compare the request sent by IE/FF in one side, and what WebTest uses.

Yours,

Ahmed

----
Blog: http://asashour.blogspot.com

From: Niels Stevens <niels.s@...>
To: "webtest@..." <webtest@...>
Sent: Tue, October 20, 2009 2:47:31 PM
Subject: [Webtest] RE: error: request header to long

UPDATE:

This is the resulting page:

Bad Request

Your browser sent a request that this server could not understand.
Size of a request header field exceeds server limit.

The error message at the bottom of the testresult is:

Unexpected exception caught: java.net.SocketException, Connection reset

Hi all,

Groeten,

Niels Stevens

Jr. Developer

Making eBusiness profitable

T: +32 (0)11/565.012
F: +32 (0)11/201.884

website: www.softlution.com

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.422 / Virus Database: 270.14.21/2445 - Release Date: 10/19/09 14:33:00

RE: error: request header to long

2009-10-20T04:47:31Z

UPDATE:

This is the resulting page:

Bad Request

Your browser sent a request that this server could not understand.
Size of a request header field exceeds server limit.

The error message at the bottom of the testresult is:

Unexpected exception caught: java.net.SocketException, Connection reset

Hi all,

Groeten,

Niels Stevens

Jr. Developer

Making eBusiness profitable

T: +32 (0)11/565.012
F: +32 (0)11/201.884

website: www.softlution.com

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.422 / Virus Database: 270.14.21/2445 - Release Date: 10/19/09 14:33:00

RE: WebTest and htmlUnit

2009-10-20T01:19:15Z

I would suggest using jMeter for load testing. I think that it is also based on htmlunit.

From: webtest-admin@... [mailto:webtest-admin@...] On Behalf Of Chad Bellan
Sent: 19 October 2009 21:58
To: webtest@...
Subject: [Webtest] WebTest and htmlUnit

I was working with htmlunit in java before finding WebTest.

1. I noticed that htmlUnit is included in WebTest. Is there any advantage to using WebTest over using only htmlunit?

2. My goal is to conduct a load test with tests running in parallel. Since WebTest has more components than htmlUnit, would it mean that I wouldn't be able to create as many threads? Would I be better off running the load test just with htmlunit and java instead of WebTest?

Chad

Chad Bellan

LUSIGHT RESEARCH

t. +1.416.934.7253

chad.bellan@...

Please visit us at www.lusight.com

error: request header to long

2009-10-20T01:02:03Z

Hi all,

Groeten,

Niels Stevens

Jr. Developer

Making eBusiness profitable

T: +32 (0)11/565.012
F: +32 (0)11/201.884

website: www.softlution.com

WebTest and htmlUnit

2009-10-19T13:57:56Z

I was working with htmlunit in java before finding WebTest.

1. I noticed that htmlUnit is included in WebTest. Is there any advantage to using WebTest over using only htmlunit?

Chad

Chad Bellan

LUSIGHT RESEARCH

t. +1.416.934.7253

chad.bellan@...

Please visit us at www.lusight.com

Unable to test Pages that use JavaScript

2009-10-19T08:57:04Z

I have been using webtest for a while disabling JS beacuse of the error that returns.
Right now I must test some stuff that is being loaded by a js funcition:

1var xhReq;

2var dtDate = new Date();

3var surl = '/ajax/sessioninfo.php?rnd=' + dtDate.getSeconds() + '&slc=' + language_id + '&nfwk=1';

5if (window.XMLHttpRequest)

6 xhReq = new XMLHttpRequest();

7else

8 xhReq = new ActiveXObject("Microsoft.XMLHTTP");

10xhReq.open("GET", surl, false);

11xhReq.send(null);

12document.getElementById('my_olx').innerHTML = xhReq.responseText;

But as I have the following step :
ant.enableJavaScript enable:"false"

when I do the invoke step the inner html under "my_olx" is not being loaded. So I can't test it.

I tried enabling the js and simulating IE7 and FF3 without any success. I still get the error. I must enable it because I need that inner html to be loaded.

does anyone succeed testing web pages that uses js with webtest?

This is the site I am testing: www.olx.com

Thanks in advance,

Hernan

Re: Odd problem

2009-10-19T08:50:23Z

Hi Alex,

I don't see any error here: your test is successful, isn't it?

Cheers,
Marc.

Alex Ignatov a écrit :

> I tried running the script on a computer with no internet restrictions, so I was able to remove the ThrowExceptionOnScriptError line. This didn't change anything and no errors came up in Webtest. Here's part of the data from the command prompt (I can't really make sense of it, but hopefully you can):
>
> 8/53)
> [clickLink] WARN (com.gargoylesoftware.htmlunit.IncorrectnessListenerImpl) - Ex
> pected content type of 'application/javascript' or 'application/ecmascript' for
> remotely loaded JavaScript element at 'https://online2.statefarm.com/apps/autoqu
> oteapply/scripts/raa.js', but got 'application/x-javascript'.
> [clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Content of windo
> w changed to https://online2.statefarm.com/apps/autoquoteapply/execute.do?TF:ID=
> ControllerFramework:0&TF:RN=1&CTCurrentPage=generalInfo&CTNextPage=drivers (text
> /html)
> [clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Content of curre
> nt window changed, it will become current response
> [clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Current form set
> to none
> [clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Current response
> now: https://online2.statefarm.com/apps/autoquoteapply/execute.do?TF:ID=Control
> lerFramework:0&TF:RN=1&CTCurrentPage=generalInfo&CTNextPage=drivers
> [clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS e
> rror: null [27:79] Error in style rule. Invalid token "!". Was expecting one of:
> <S>, "}", ";", <IDENT>.
> [clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS w
> arning: null [27:79] Ignoring the following declarations in this rule.
> [clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS e
> rror: null [12:17] Error in style rule. Invalid token "*". Was expecting one of:
> <S>, "}", ";", <IDENT>.
> [clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS w
> arning: null [12:17] Ignoring the following declarations in this rule.
> [setInputField] INFO (com.canoo.webtest.steps.Step) - >>>> Start Step: setInput
> Field > [setSelectField] INFO (com.canoo.webtest.steps.form.AbstractSetFieldStep) - Fou
> nd 1 suitable fields, considering only the first one
> [clickLink] INFO (com.canoo.webtest.steps.Step) - >>>> Start Step: clickLink (5
> 3/53)
> [clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Content of windo
> w changed to https://online2.statefarm.com/apps/autoquoteapply/execute.do?TF:ID=
> ControllerFramework:0&TF:RN=6&CTCurrentPage=vehiclesThree&CTNextPage=coveragePac
> kagesBasic (text/html)
> [clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Content of curre
> nt window changed, it will become current response
> [clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Current form set
> to none
> [clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Current response
> now: https://online2.statefarm.com/apps/autoquoteapply/execute.do?TF:ID=Control
> lerFramework:0&TF:RN=6&CTCurrentPage=vehiclesThree&CTNextPage=coveragePackagesBa
> sic
> [clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS e
> rror: null [79:9] Error in style rule. Invalid token "*". Was expecting one of:
> <S>, "}", ";", <IDENT>.
> [clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS w
> arning: null [79:9] Ignoring the following declarations in this rule.
> [clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS e
> rror: null [132:9] Error in style rule. Invalid token "*". Was expecting one of:
> <S>, "}", ";", <IDENT>.
> [clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS w
> arning: null [132:9] Ignoring the following declarations in this rule.
> [clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS e
> rror: null [439:9] Error in style rule. Invalid token "*". Was expecting one of:
> <S>, "}", ";", <IDENT>.
> [clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS w
> arning: null [439:9] Ignoring the following declarations in this rule.
> INFO (com.canoo.webtest.ant.WebtestTask) - Finished executing webtest "Automate
> the State Farm auto rate quote." (C:\Downloads\build\myWebTestProject\tests\sta
> tefarm.xml:9: )
> INFO (com.canoo.webtest.reporting.XmlReporter) - Writing report to C:\Downloads
> \build\myWebTestProject\results\001_AutomateTheState\WebTestReport.xml
> INFO (com.canoo.webtest.ant.WebtestTask) - Test report successfully created.
>
> wt.groovyTests:
>
> wt.parallel.waitForCompletion:
>
> wt.htmlReports.init:
>
> wt.htmlReports:
> [mkdir] Created dir: C:\Downloads\build\myWebTestProject\results\resources
> [copy] Copying 20 files to C:\Downloads\build\myWebTestProject\results\reso
> urces
> [xslt] Transforming into C:\Downloads\build\myWebTestProject\results
> [xslt] Processing C:\Downloads\build\myWebTestProject\results\001_AutomateT
> heState\WebTestReport.xml to C:\Downloads\build\myWebTestProject\results\001_Aut
> omateTheState\WebTestReport.html
> [xslt] Loading stylesheet C:\Downloads\build\resources\WebTestReport.xsl
> [xslt] Transforming into C:\Downloads\build\myWebTestProject\results
> [xslt] Processing C:\Downloads\build\myWebTestProject\results\001_AutomateT
> heState\WebTestReport.xml to C:\Downloads\build\myWebTestProject\results\001_Aut
> omateTheState\WebTestSummary.xml
> [xslt] Loading stylesheet C:\Downloads\build\resources\WebTestReportSummary
> Extractor.xsl
> [groovyScript] Reading C:\Downloads\build\myWebTestProject\results\001_AutomateT
> heState\WebTestSummary.xml
> [groovyScript] Writing C:\Downloads\build\myWebTestProject\results\WebTestOvervi
> ew.xml
> [xslt] Processing C:\Downloads\build\myWebTestProject\results\WebTestOvervi
> ew.xml to C:\Downloads\build\myWebTestProject\results\index.html
> [xslt] Loading stylesheet C:\Downloads\build\resources\WebTestReportOvervie
> w.xsl
>
> wt.openResultFile.init:
>
> wt.openResultFile:
> [echo] Opening result file C:\Downloads\build\myWebTestProject\results\inde
> x.html with cmd
>
> wt.junitLikeReports:
> [xslt] Processing C:\Downloads\build\myWebTestProject\results\WebTestOvervi
> ew.xml to C:\Downloads\build\myWebTestProject\results\WebTestOverview.junit.xml
> [xslt] Loading stylesheet C:\Downloads\build\resources\WebTestOverview2JUni
> t.xsl
>
> wt.countWebtestResults:
> [countWebtestResults] 1 webtests run (successful: 1, failed: 0)
>
> wt.webtestMonitor.shutdown:
>
> wt.after.testInWork:
>
> wt.full:
>
> BUILD SUCCESSFUL
> Total time: 43 seconds
>
> C:\Downloads\build\myWebTestProject>
>
> -----Original Message-----
> From: webtest-admin@... [mailto:webtest-admin@...] On Behalf Of Marc Guillemot
> Sent: Friday, October 16, 2009 5:05 AM
> To: webtest@...
> Subject: Re: [Webtest] Odd problem
>
> Hi,
>
> I don't think that it is possible to find the cause without to know your
> web site.
> If you use
> <option name="ThrowExceptionOnScriptError" value="false" />
> then it probably means that WebTest is not able to interpret the JS code
> correctly and therefore it is not a surprise that you don't get the same
> results.
>
> An idea is to use a proxy to compare the requests that are made by
> WebTest and by a normal browser.
>
> Cheers,
> Marc.
>
> Alex Ignatov a écrit :
>> Hey,
>>
>> I recently ran a test on statefarm.com which worked fine according to
>> webtest (build was successful). The test goes through the auto rate
>> quote on statefarm.com (about 5 pages of forms to fill out), and gets
>> through all of it just fine. However, at the very end I just get to a
>> page which says
>>
>> ***Unable to Continue*
>>
>> We are unable to furnish an online quote with the information provided.
>> Please forward your information to a State Farm agent who can help
>> determine your insurance needs.
>>
>> When I fill in the same information manually myself, I get an auto rate
>> quote.
>>
>> I am wondering if someone can take a look at my script code to see if
>> maybe I'm somehow filling out a field wrong? Anyone have some time to spare?
>>
>>
>> <?xml version="1.0"?>
>>
>> <!DOCTYPE project SYSTEM "../dtd/Project.dtd">
>>
>> <project default="test">
>>
>> <target name="test">
>>
>> <webtest name="Automate the State Farm auto rate quote.">
>>
>> <config>
>>
>> <option
>> name="ThrowExceptionOnScriptError" value="false" />
>>
>> <header name="User-Agent"
>> value="Mozilla/5.0 (Windows; U; Windows NT 5.1; de; rv:1.8)
>> Gecko/20051111 Firefox/1.5"/>
>>
>> </config>
>>
>> <invoke url="https://statefarm.com"
>> description="Go to State Farm"/>
>>
>> <setInputField htmlid="sZip" value="60630" />
>>
>> <clickButton htmlid="getRateQuoteGo" />
>>
>> <setInputField htmlid="__SFX_UniqueID_3"
>> value="Zxxzzyyiarq" />
>>
>> <setInputField htmlid="__SFX_UniqueID_5"
>> value="Yxxzzyyiarq" />
>>
>> <setSelectField name="residenceType" value="HOME" />
>>
>> <setSelectField name="homeOwnerShipStatus"
>> value="OWN" />
>>
>> <setInputField htmlid="__SFX_UniqueID_6"
>> value="1" />
>>
>> <setInputField htmlid="__SFX_UniqueID_7"
>> value="1" />
>>
>> <setInputField htmlid="__SFX_UniqueID_8"
>> value="4951 W Winona St" />
>>
>> <setInputField htmlid="__SFX_UniqueID_12"
>> value="BuildValidation-It-c-2@..." />
>>
>> <setInputField htmlid="__SFX_UniqueID_14"
>> value="222-333-4444" />
>>
>> <forceHiddenInputField
>> name="CommPersonalLiabilityUmbrellaPolicy" value="N" />
>>
>> <forceHiddenInputField
>> name="licenseSusOrRevokedInd" value="N" />
>>
>> <forceHiddenInputField
>> name="driverOwnedVehicleWithOutIns" value="N" />
>>
>> <forceHiddenInputField
>> name="existingSFCustomerInd" value="N" />
>>
>> <clickLink htmlid="buttonContinueId" />
>>
>> <clickLink htmlid="yesButtonId" />
>>
>> <setInputField name="driver1DateOfBirthFMT"
>> value="03-01-1989" />
>>
>> <forceHiddenInputField name="driver1Gender"
>> value="M" />
>>
>> <setSelectField name="driver1MaritalStatus"
>> value="M" />
>>
>> <setSelectField name="driver1EmploymentStatus"
>> value="FULL-TIME" />
>>
>> <setInputField htmlid="__SFX_UniqueID_9"
>> value="Test Analyst" />
>>
>> <setInputField htmlid="__SFX_UniqueID_10"
>> value="RM665890" />
>>
>> <setSelectField name="driverLicenseState"
>> value="OH" />
>>
>> <forceHiddenInputField
>> name="driver1AccidentsLastThreeYearsInd" value="N" />
>>
>> <setSelectField name="driver1MajorViolations"
>> value="NONE" />
>>
>> <forceHiddenInputField
>> name="driver1TicketsLastThreeYearsInd" value="N" />
>>
>> <clickLink htmlid="buttonContinueId" />
>>
>> <forceHiddenInputField name="goodStudent"
>> value="Y" />
>>
>> <forceHiddenInputField name="longDistanceSchool"
>> value="N" />
>>
>> <clickLink htmlid="buttonContinueId" />
>>
>>
>>
>> <forceHiddenInputField name="ymmbYear1"
>> value="1993" />
>>
>> <forceHiddenInputField name="ymmbMake1"
>> value="CHRYSLER" />
>>
>> <forceHiddenInputField name="ymmbModel1"
>> value="LEBARON" />
>>
>> <forceHiddenInputField name="ymmbBodyStyle1"
>> value=""LE" 4D SED GAS" />
>>
>> <clickLink htmlid="buttonContinueId" />
>>
>> <setInputField htmlid="__SFX_UniqueID_3"
>> value="5" />
>>
>> <setSelectField name="guiDaysDrivenPerWeek1"
>> value="5" />
>>
>> <setInputField htmlid="__SFX_UniqueID_4"
>> value="50,000" />
>>
>> <setInputField htmlid="__SFX_UniqueID_5"
>> value="9501" />
>>
>> <setSelectField name="guiVehicleFinancing1"
>> value="OWN" />
>>
>> <forceHiddenInputField
>> name="guiRegisteredOwners1:0" value="Y" />
>>
>> <setSelectField name="guiTypeOfAirbag1"
>> value="DUAL FRONT SEAT" />
>>
>> <forceHiddenInputField
>> name="guiVehicleEquippedWithAutoSeatbelts1" value="Y" />
>>
>> <forceHiddenInputField
>> name="guiVehicleEquippedWithAntiTheft1" value="N" />
>>
>> <setInputField
>> name="guiMonthAndYearPurchased1FMT" value="08-01-2005" />
>>
>> <clickLink htmlid="buttonContinueId" />
>>
>> <setSelectField name="guiCurrentInsCompany:0"
>> value="ALLSTATE" />
>>
>> <setInputField
>> name="guiWithInsCompanyforYears:0FMT" value="5" />
>>
>> <setSelectField
>> name="guiCurrentCompBodilyInjuryLmts:0" value="25000/50000" />
>>
>>
>> <clickLink htmlid="buttonContinueId" />
>>
>>
>>
>>
>> </webtest>
>>
>> </target>
>>
>> </project>
>>
>>
>> Thanks,
>>
>> Alex
>>
>
> _______________________________________________
> WebTest mailing list
> WebTest@...
> http://lists.canoo.com/mailman/listinfo/webtest
> _______________________________________________
> WebTest mailing list
> WebTest@...
> http://lists.canoo.com/mailman/listinfo/webtest
>

_______________________________________________
WebTest mailing list
WebTest@...
http://lists.canoo.com/mailman/listinfo/webtest

Re: scriptStep doesn't work

2009-10-19T08:47:34Z

Hi Alex,

this is strange. Which WebTest build do you use?

Take care, that you can't use it to directly execute JS code in the
context of page as you try in the snippet below.

Cheers,
Marc.

Alex Ignatov a écrit :

> I get this error whenever I try to use scriptStep with javascript:
>
> Error invoking script: java.lang.ClassNotFoundException:
> org.apache.bsf.engines.javascript.JavaScriptEngine
>
> Here’s the code I’m using:
>
> <scriptStep description="submit a form"
> language="javascript">
>
> document.MainForm.submit();
>
> </scriptStep>
>
> Anyone know a solution?
>
> Thanks,
>
> Alex
>

_______________________________________________
WebTest mailing list
WebTest@...
http://lists.canoo.com/mailman/listinfo/webtest

Re: Javascript-errors

2009-10-19T08:44:39Z

Hi,

if your app relies on correct JS evaluation and if this fails, then it
is normal that you get strange results while ignoring JS errors.

Cheers,
Marc.

Niels Stevens a écrit :

> Thx, this worked for a while, but now I am again getting js errors in every test that are stopping the test. The <option name="throwExceptionOnScriptError" value="false"/> tag is added in every test. I don't get it, sometimes it works, sometimes it doesn't.
>
> Groeten,
>
> Niels Stevens
> Jr. Developer
>
>
>
> Making eBusiness profitable
>
> T: +32 (0)11/565.012
> F: +32 (0)11/201.884
>
> website: www.softlution.com
>
>
> -----Oorspronkelijk bericht-----
> Van: webtest-admin@... [mailto:webtest-admin@...] Namens Marc Guillemot
> Verzonden: donderdag 15 oktober 2009 9:14
> Aan: webtest@...
> Onderwerp: Re: [Webtest] Javascript-errors
>
> Hi,
>
> <config>
> <option name="throwExceptionOnScriptError" value="false"/>
> </config>
>
> but better is to isolate the cause of the JS error to allow it to be
> fixed ;-)
>
> Cheers,
> Marc.
>
> Niels Stevens a écrit :
>> Hi,
>>
>>
>>
>> Upon clicking a certain element in a page which opens another page with
>> javascript, webtest reports a javascript error, while clicking that same
>> element manually opens the page. Is there a way in webtest to ignore
>> javascript errors without disabling javascript?
>>
>>
>>
>
> _______________________________________________
> WebTest mailing list
> WebTest@...
> http://lists.canoo.com/mailman/listinfo/webtest
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.421 / Virus Database: 270.14.18/2437 - Release Date: 10/15/09 03:57:00
> _______________________________________________
> WebTest mailing list
> WebTest@...
> http://lists.canoo.com/mailman/listinfo/webtest
>

_______________________________________________
WebTest mailing list
WebTest@...
http://lists.canoo.com/mailman/listinfo/webtest

RE: Odd problem

2009-10-16T12:01:55Z

I tried running the script on a computer with no internet restrictions, so I was able to remove the ThrowExceptionOnScriptError line. This didn't change anything and no errors came up in Webtest. Here's part of the data from the command prompt (I can't really make sense of it, but hopefully you can):

8/53)
[clickLink] WARN (com.gargoylesoftware.htmlunit.IncorrectnessListenerImpl) - Ex
pected content type of 'application/javascript' or 'application/ecmascript' for
remotely loaded JavaScript element at 'https://online2.statefarm.com/apps/autoqu
oteapply/scripts/raa.js', but got 'application/x-javascript'.
[clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Content of windo
w changed to https://online2.statefarm.com/apps/autoquoteapply/execute.do?TF:ID=
ControllerFramework:0&TF:RN=1&CTCurrentPage=generalInfo&CTNextPage=drivers (text
/html)
[clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Content of curre
nt window changed, it will become current response
[clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Current form set
to none
[clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Current response
now: https://online2.statefarm.com/apps/autoquoteapply/execute.do?TF:ID=Control
lerFramework:0&TF:RN=1&CTCurrentPage=generalInfo&CTNextPage=drivers
[clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS e
rror: null [27:79] Error in style rule. Invalid token "!". Was expecting one of:
<S>, "}", ";", <IDENT>.
[clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS w
arning: null [27:79] Ignoring the following declarations in this rule.
[clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS e
rror: null [12:17] Error in style rule. Invalid token "*". Was expecting one of:
<S>, "}", ";", <IDENT>.
[clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS w
arning: null [12:17] Ignoring the following declarations in this rule.
[setInputField] INFO (com.canoo.webtest.steps.Step) - >>>> Start Step: setInput
Field [setSelectField] INFO (com.canoo.webtest.steps.form.AbstractSetFieldStep) - Fou
nd 1 suitable fields, considering only the first one
[clickLink] INFO (com.canoo.webtest.steps.Step) - >>>> Start Step: clickLink (5
3/53)
[clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Content of windo
w changed to https://online2.statefarm.com/apps/autoquoteapply/execute.do?TF:ID=
ControllerFramework:0&TF:RN=6&CTCurrentPage=vehiclesThree&CTNextPage=coveragePac
kagesBasic (text/html)
[clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Content of curre
nt window changed, it will become current response
[clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Current form set
to none
[clickLink] INFO (com.canoo.webtest.engine.WebClientContext) - Current response
now: https://online2.statefarm.com/apps/autoquoteapply/execute.do?TF:ID=Control
lerFramework:0&TF:RN=6&CTCurrentPage=vehiclesThree&CTNextPage=coveragePackagesBa
sic
[clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS e
rror: null [79:9] Error in style rule. Invalid token "*". Was expecting one of:
<S>, "}", ";", <IDENT>.
[clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS w
arning: null [79:9] Ignoring the following declarations in this rule.
[clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS e
rror: null [132:9] Error in style rule. Invalid token "*". Was expecting one of:
<S>, "}", ";", <IDENT>.
[clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS w
arning: null [132:9] Ignoring the following declarations in this rule.
[clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS e
rror: null [439:9] Error in style rule. Invalid token "*". Was expecting one of:
<S>, "}", ";", <IDENT>.
[clickLink] WARN (com.gargoylesoftware.htmlunit.DefaultCssErrorHandler) - CSS w
arning: null [439:9] Ignoring the following declarations in this rule.
INFO (com.canoo.webtest.ant.WebtestTask) - Finished executing webtest "Automate
the State Farm auto rate quote." (C:\Downloads\build\myWebTestProject\tests\sta
tefarm.xml:9: )
INFO (com.canoo.webtest.reporting.XmlReporter) - Writing report to C:\Downloads
\build\myWebTestProject\results\001_AutomateTheState\WebTestReport.xml
INFO (com.canoo.webtest.ant.WebtestTask) - Test report successfully created.

wt.groovyTests:

wt.parallel.waitForCompletion:

wt.htmlReports.init:

wt.htmlReports:
[mkdir] Created dir: C:\Downloads\build\myWebTestProject\results\resources
[copy] Copying 20 files to C:\Downloads\build\myWebTestProject\results\reso
urces
[xslt] Transforming into C:\Downloads\build\myWebTestProject\results
[xslt] Processing C:\Downloads\build\myWebTestProject\results\001_AutomateT
heState\WebTestReport.xml to C:\Downloads\build\myWebTestProject\results\001_Aut
omateTheState\WebTestReport.html
[xslt] Loading stylesheet C:\Downloads\build\resources\WebTestReport.xsl
[xslt] Transforming into C:\Downloads\build\myWebTestProject\results
[xslt] Processing C:\Downloads\build\myWebTestProject\results\001_AutomateT
heState\WebTestReport.xml to C:\Downloads\build\myWebTestProject\results\001_Aut
omateTheState\WebTestSummary.xml
[xslt] Loading stylesheet C:\Downloads\build\resources\WebTestReportSummary
Extractor.xsl
[groovyScript] Reading C:\Downloads\build\myWebTestProject\results\001_AutomateT
heState\WebTestSummary.xml
[groovyScript] Writing C:\Downloads\build\myWebTestProject\results\WebTestOvervi
ew.xml
[xslt] Processing C:\Downloads\build\myWebTestProject\results\WebTestOvervi
ew.xml to C:\Downloads\build\myWebTestProject\results\index.html
[xslt] Loading stylesheet C:\Downloads\build\resources\WebTestReportOvervie
w.xsl

wt.openResultFile.init:

wt.openResultFile:
[echo] Opening result file C:\Downloads\build\myWebTestProject\results\inde
x.html with cmd

wt.junitLikeReports:
[xslt] Processing C:\Downloads\build\myWebTestProject\results\WebTestOvervi
ew.xml to C:\Downloads\build\myWebTestProject\results\WebTestOverview.junit.xml
[xslt] Loading stylesheet C:\Downloads\build\resources\WebTestOverview2JUni
t.xsl

wt.countWebtestResults:
[countWebtestResults] 1 webtests run (successful: 1, failed: 0)

wt.webtestMonitor.shutdown:

wt.after.testInWork:

wt.full:

BUILD SUCCESSFUL
Total time: 43 seconds

C:\Downloads\build\myWebTestProject>

-----Original Message-----
From: webtest-admin@... [mailto:webtest-admin@...] On Behalf Of Marc Guillemot
Sent: Friday, October 16, 2009 5:05 AM
To: webtest@...
Subject: Re: [Webtest] Odd problem

Hi,

I don't think that it is possible to find the cause without to know your
web site.
If you use
<option name="ThrowExceptionOnScriptError" value="false" />
then it probably means that WebTest is not able to interpret the JS code
correctly and therefore it is not a surprise that you don't get the same
results.

An idea is to use a proxy to compare the requests that are made by
WebTest and by a normal browser.

Cheers,
Marc.

Alex Ignatov a écrit :

> Hey,
>
> I recently ran a test on statefarm.com which worked fine according to
> webtest (build was successful). The test goes through the auto rate
> quote on statefarm.com (about 5 pages of forms to fill out), and gets
> through all of it just fine. However, at the very end I just get to a
> page which says
>
> ***Unable to Continue*
>
> We are unable to furnish an online quote with the information provided.
> Please forward your information to a State Farm agent who can help
> determine your insurance needs.
>
> When I fill in the same information manually myself, I get an auto rate
> quote.
>
> I am wondering if someone can take a look at my script code to see if
> maybe I'm somehow filling out a field wrong? Anyone have some time to spare?
>
>
> <?xml version="1.0"?>
>
> <!DOCTYPE project SYSTEM "../dtd/Project.dtd">
>
> <project default="test">
>
> <target name="test">
>
> <webtest name="Automate the State Farm auto rate quote.">
>
> <config>
>
> <option
> name="ThrowExceptionOnScriptError" value="false" />
>
> <header name="User-Agent"
> value="Mozilla/5.0 (Windows; U; Windows NT 5.1; de; rv:1.8)
> Gecko/20051111 Firefox/1.5"/>
>
> </config>
>
> <invoke url="https://statefarm.com"
> description="Go to State Farm"/>
>
> <setInputField htmlid="sZip" value="60630" />
>
> <clickButton htmlid="getRateQuoteGo" />
>
> <setInputField htmlid="__SFX_UniqueID_3"
> value="Zxxzzyyiarq" />
>
> <setInputField htmlid="__SFX_UniqueID_5"
> value="Yxxzzyyiarq" />
>
> <setSelectField name="residenceType" value="HOME" />
>
> <setSelectField name="homeOwnerShipStatus"
> value="OWN" />
>
> <setInputField htmlid="__SFX_UniqueID_6"
> value="1" />
>
> <setInputField htmlid="__SFX_UniqueID_7"
> value="1" />
>
> <setInputField htmlid="__SFX_UniqueID_8"
> value="4951 W Winona St" />
>
> <setInputField htmlid="__SFX_UniqueID_12"
> value="BuildValidation-It-c-2@..." />
>
> <setInputField htmlid="__SFX_UniqueID_14"
> value="222-333-4444" />
>
> <forceHiddenInputField
> name="CommPersonalLiabilityUmbrellaPolicy" value="N" />
>
> <forceHiddenInputField
> name="licenseSusOrRevokedInd" value="N" />
>
> <forceHiddenInputField
> name="driverOwnedVehicleWithOutIns" value="N" />
>
> <forceHiddenInputField
> name="existingSFCustomerInd" value="N" />
>
> <clickLink htmlid="buttonContinueId" />
>
> <clickLink htmlid="yesButtonId" />
>
> <setInputField name="driver1DateOfBirthFMT"
> value="03-01-1989" />
>
> <forceHiddenInputField name="driver1Gender"
> value="M" />
>
> <setSelectField name="driver1MaritalStatus"
> value="M" />
>
> <setSelectField name="driver1EmploymentStatus"
> value="FULL-TIME" />
>
> <setInputField htmlid="__SFX_UniqueID_9"
> value="Test Analyst" />
>
> <setInputField htmlid="__SFX_UniqueID_10"
> value="RM665890" />
>
> <setSelectField name="driverLicenseState"
> value="OH" />
>
> <forceHiddenInputField
> name="driver1AccidentsLastThreeYearsInd" value="N" />
>
> <setSelectField name="driver1MajorViolations"
> value="NONE" />
>
> <forceHiddenInputField
> name="driver1TicketsLastThreeYearsInd" value="N" />
>
> <clickLink htmlid="buttonContinueId" />
>
> <forceHiddenInputField name="goodStudent"
> value="Y" />
>
> <forceHiddenInputField name="longDistanceSchool"
> value="N" />
>
> <clickLink htmlid="buttonContinueId" />
>
>
>
> <forceHiddenInputField name="ymmbYear1"
> value="1993" />
>
> <forceHiddenInputField name="ymmbMake1"
> value="CHRYSLER" />
>
> <forceHiddenInputField name="ymmbModel1"
> value="LEBARON" />
>
> <forceHiddenInputField name="ymmbBodyStyle1"
> value=""LE" 4D SED GAS" />
>
> <clickLink htmlid="buttonContinueId" />
>
> <setInputField htmlid="__SFX_UniqueID_3"
> value="5" />
>
> <setSelectField name="guiDaysDrivenPerWeek1"
> value="5" />
>
> <setInputField htmlid="__SFX_UniqueID_4"
> value="50,000" />
>
> <setInputField htmlid="__SFX_UniqueID_5"
> value="9501" />
>
> <setSelectField name="guiVehicleFinancing1"
> value="OWN" />
>
> <forceHiddenInputField
> name="guiRegisteredOwners1:0" value="Y" />
>
> <setSelectField name="guiTypeOfAirbag1"
> value="DUAL FRONT SEAT" />
>
> <forceHiddenInputField
> name="guiVehicleEquippedWithAutoSeatbelts1" value="Y" />
>
> <forceHiddenInputField
> name="guiVehicleEquippedWithAntiTheft1" value="N" />
>
> <setInputField
> name="guiMonthAndYearPurchased1FMT" value="08-01-2005" />
>
> <clickLink htmlid="buttonContinueId" />
>
> <setSelectField name="guiCurrentInsCompany:0"
> value="ALLSTATE" />
>
> <setInputField
> name="guiWithInsCompanyforYears:0FMT" value="5" />
>
> <setSelectField
> name="guiCurrentCompBodilyInjuryLmts:0" value="25000/50000" />
>
>
> <clickLink htmlid="buttonContinueId" />
>
>
>
>
> </webtest>
>
> </target>
>
> </project>
>
>
> Thanks,
>
> Alex
>