Why Networkmanager gets AP need several time?

在2009-11-03 05:12:33，"Dan Williams" <dcbw@...> 写道：
>On Mon, 2009-11-02 at 18:27 +0800, tommy.hong wrote:
>> 
>> root@localhost:/# time NetworkManager --no-daemon
>> NetworkManager: <info>  starting...
>> NetworkManager: <info>  starting...
>
>It looks like two copies of NM are getting started there.  Not sure
>where that's coming from, but it's wrong.  NM itself doesn't do that;
>maybe 'time' does somehow?
>
>Dan
>
>> ifup: interface lo already configured
>> ** Message: NM appeared
>> NetworkManager: <info>  (eth0): driver 'dm9000' does not support
>> carrier detection.
>>     You must switch to it manually.
>> NetworkManager: <info>  (eth0): driver 'dm9000' does not support
>> carrier detection.
>>     You must switch to it manually.
>> 
>> NetworkManager: <info>  (eth0): new Ethernet device (driver: 'dm9000')
>> NetworkManager: <info>  (eth0): new Ethernet device (driver: 'dm9000')
>> 
>> NetworkManager: <info>  (eth0): exported
>> as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa
>> NetworkManager: <info>  (eth0): exported
>> as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa
>> 
>> NetworkManager: <info>  (ra0): driver does not support SSID scans
>> (scan_capa 0x00).
>> NetworkManager: <info>  (ra0): driver does not support SSID scans
>> (scan_capa 0x00).
>> 
>> NetworkManager: <info>  (ra0): new 802.11 WiFi device (driver: 'usb')
>> NetworkManager: <info>  (ra0): new 802.11 WiFi device (driver: 'usb')
>> 
>> NetworkManager: <info>  (ra0): exported
>> as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0
>> NetworkManager: <info>  (ra0): exported
>> as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0
>> 
>> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3_serial_unknown_3, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3
>> serial_device: /dev/s3c_serial3, driver: s3c-uart
>> ttyname: s3c_serial3
>> sysfs_path get udev
>> proped: /sys/devices/platform/s3c-uart.3/tty/s3c_serial3 
>> libudev: 1, gsm: 0, cdma: 0
>> hal get : gsm: 0, cdma: 0
>> NetworkManager: <info>  (s3c_serial3): ignoring due to lack of mobile
>> broadband capabilties
>> NetworkManager: <info>  (s3c_serial3): ignoring due to lack of mobile
>> broadband capabilties
>> 
>> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2_serial_unknown_2, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2
>> serial_device: /dev/s3c_serial2, driver: s3c-uart
>> ttyname: s3c_serial2
>> sysfs_path get udev
>> proped: /sys/devices/platform/s3c-uart.2/tty/s3c_serial2 
>> libudev: 1, gsm: 0, cdma: 0
>> hal get : gsm: 0, cdma: 0
>> NetworkManager: <info>  (s3c_serial2): ignoring due to lack of mobile
>> broadband capabilties
>> NetworkManager: <info>  (s3c_serial2): ignoring due to lack of mobile
>> broadband capabilties
>> 
>> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1_serial_unknown_1, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1
>> serial_device: /dev/s3c_serial1, driver: s3c-uart
>> ttyname: s3c_serial1
>> sysfs_path get udev
>> proped: /sys/devices/platform/s3c-uart.1/tty/s3c_serial1 
>> libudev: 1, gsm: 0, cdma: 0
>> hal get : gsm: 0, cdma: 0
>> NetworkManager: <info>  (s3c_serial1): ignoring due to lack of mobile
>> broadband capabilties
>> NetworkManager: <info>  (s3c_serial1): ignoring due to lack of mobile
>> broadband capabilties
>> 
>> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0_serial_unknown_0, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0
>> serial_device: /dev/s3c_serial0, driver: s3c-uart
>> ttyname: s3c_serial0
>> sysfs_path get udev
>> proped: /sys/devices/platform/s3c-uart.0/tty/s3c_serial0 
>> libudev: 1, gsm: 0, cdma: 0
>> hal get : gsm: 0, cdma: 0
>> NetworkManager: <info>  (s3c_serial0): ignoring due to lack of mobile
>> broadband capabilties
>> NetworkManager: <info>  (s3c_serial0): ignoring due to lack of mobile
>> broadband capabilties
>> 
>> NetworkManager: <info>  Trying to start the system settings daemon...
>> NetworkManager: <info>  Trying to start the system settings daemon...
>> 
>> NetworkManager: <info>  (eth0): device state change: 1 -> 2
>> NetworkManager: <info>  (eth0): device state change: 1 -> 2
>> eth0: link down
>> 
>> NetworkManager: <info>  (eth0): bringing up device.
>> NetworkManager: <info>  (eth0): bringing up device.
>> 
>> NetworkManager: <info>  (eth0): preparing device.
>> NetworkManager: <info>  (eth0): preparing device.
>> 
>> NetworkManager: <info>  (eth0): deactivating device (reason: 2).
>> NetworkManager: <info>  (eth0): deactivating device (reason: 2).
>> 
>> NetworkManager: <info>  (ra0): device state change: 1 -> 2
>> NetworkManager: <info>  (ra0): device state change: 1 -> 2
>> 
>> NetworkManager: <info>  (ra0): bringing up device.
>> NetworkManager: <info>  (ra0): bringing up device.
>> 
>> eth0: link up, 10Mbps, half-duplex, lpa 0x0021
>> <-- RTMPAllocTxRxRingMemory, Status=0
>> -->RTUSBVenderReset
>> <--RTUSBVenderReset
>> Key1Str is Invalid key length(0) or Type(0)
>> Key2Str is Invalid key length(0) or Type(0)
>> Key3Str is Invalid key length(0) or Type(0)
>> Key4Str is Invalid key length(0) or Type(0)
>> 1. Phy Mode = 9
>> 2. Phy Mode = 9
>> 3. Phy Mode = 9
>> RTMPSetPhyMode: channel is out of range, use first channel=1 
>> MCS Set = ff 00 00 00 01
>> <==== rt28xx_init, Status=0
>> 0x1300 = 00064300
>> NetworkManager: <info>  (ra0): preparing device.
>> NetworkManager: <info>  (ra0): preparing device.
>> 
>> NetworkManager: <info>  (ra0): deactivating device (reason: 2).
>> NetworkManager: <info>  (ra0): deactivating device (reason: 2).
>> 
>> NetworkManager: <info>  (eth0): device state change: 2 -> 3
>> NetworkManager: <info>  (eth0): device state change: 2 -> 3
>> 
>> NetworkManager: <info>  (ra0): device state change: 2 -> 3
>> NetworkManager: <info>  (ra0): device state change: 2 -> 3
>> 
>> ioctl[SIOCSIWAUTH]: Operation not supported
>> WEXT auth param 4 value 0x0 - NetworkManager: <info>  (ra0):
>> supplicant interface state:  starting -> ready
>> NetworkManager: <info>  (ra0): supplicant interface state:  starting
>> -> ready
>> 
>> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>> power off backlight
>> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>> ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666
>> NetworkManager: <info>  Activation (ra0) starting connection 'Auto
>> midfun'
>> NetworkManager: <info>  Activation (ra0) starting connection 'Auto
>> midfun'
>> 
>> NetworkManager: <info>  (ra0): device state change: 3 -> 4
>> NetworkManager: <info>  (ra0): device state change: 3 -> 4
>> 
>> NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device Prepare)
>> scheduled...
>> NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device Prepare)
>> scheduled...
>> 
>> NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device Prepare)
>> started...
>> NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device Prepare)
>> started...
>> 
>> NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>> Configure) scheduled...
>> NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>> Configure) scheduled...
>> 
>> NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device Prepare)
>> complete.
>> NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device Prepare)
>> complete.
>> 
>> NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>> Configure) starting...
>> NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>> Configure) starting...
>> 
>> NetworkManager: <info>  (ra0): device state change: 4 -> 5
>> NetworkManager: <info>  (ra0): device state change: 4 -> 5
>> 
>> NetworkManager: <info>  Activation (ra0/wireless): access point 'Auto
>> midfun' has security, but secrets are required.
>> NetworkManager: <info>  Activation (ra0/wireless): access point 'Auto
>> midfun' has security, but secrets are required.
>> 
>> NetworkManager: <info>  (ra0): device state change: 5 -> 6
>> NetworkManager: <info>  (ra0): device state change: 5 -> 6
>> 
>> NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>> Configure) complete.
>> NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>> Configure) complete.
>> 
>> 
>> ** (nm-applet:1964): WARNING **: <WARN>  nm_gconf_get_keyring_items():
>> key: /system/networking/private-data/229b9125-d1af-40dd-aa4d-8974724d16b0/802-11-wireless-security/psk
>> 
>> 
>> NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device Prepare)
>> scheduled...
>> NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device Prepare)
>> scheduled...
>> 
>> NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device Prepare)
>> started...
>> NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device Prepare)
>> started...
>> 
>> NetworkManager: <info>  (ra0): device state change: 6 -> 4
>> NetworkManager: <info>  (ra0): device state change: 6 -> 4
>> 
>> NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>> Configure) scheduled...
>> NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>> Configure) scheduled...
>> 
>> NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device Prepare)
>> complete.
>> NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device Prepare)
>> complete.
>> 
>> NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>> Configure) starting...
>> NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>> Configure) starting...
>> 
>> NetworkManager: <info>  (ra0): device state change: 4 -> 5
>> NetworkManager: <info>  (ra0): device state change: 4 -> 5
>> 
>> NetworkManager: <info>  Activation (ra0/wireless): connection 'Auto
>> midfun' has security, and secrets exist.  No new secrets needed.
>> NetworkManager: <info>  Activation (ra0/wireless): connection 'Auto
>> midfun' has security, and secrets exist.  No new secrets needed.
>> 
>> NetworkManager: <info>  Config: added 'ssid' value 'midfun'
>> NetworkManager: <info>  Config: added 'ssid' value 'midfun'
>> 
>> NetworkManager: <info>  Config: added 'scan_ssid' value '1'
>> NetworkManager: <info>  Config: added 'scan_ssid' value '1'
>> 
>> NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
>> NetworkManager: <info>  Config: added 'key_mgmt' value 'WPA-PSK'
>> 
>> NetworkManager: <info>  Config: added 'psk' value '<omitted>'
>> NetworkManager: <info>  Config: added 'psk' value '<omitted>'
>> 
>> NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>> Configure) complete.
>> NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>> Configure) complete.
>> 
>> NetworkManager: <info>  Config: set interface ap_scan to 1
>> NetworkManager: <info>  Config: set interface ap_scan to 1
>> 
>> NetworkManager: <info>  (ra0): supplicant connection state:  scanning
>> -> disconnected
>> NetworkManager: <info>  (ra0): supplicant connection state:  scanning
>> -> disconnected
>> 
>> NetworkManager: <info>  (ra0): supplicant connection state:
>> disconnected -> scanning
>> NetworkManager: <info>  (ra0): supplicant connection state:
>> disconnected -> scanning
>> 
>> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>> ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666
>> ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
>> Trying to associate with 00:1c:b0:91:6e:8c (SSID='midfun' freq=2437
>> MHz)
>> NetworkManager: <info>  (ra0): supplicant connection state:  scanning
>> -> associating
>> NetworkManager: <info>  (ra0): supplicant connection state:  scanning
>> -> associating
>> 
>> Associated with 00:1c:b0:91:6e:8c
>> NetworkManager: <info>  (ra0): supplicant connection state:
>> associating -> associated
>> NetworkManager: <info>  (ra0): supplicant connection state:
>> associating -> associated
>> 
>> NetworkManager: <info>  (ra0): supplicant connection state:
>> associated -> 4-way handshake
>> NetworkManager: <info>  (ra0): supplicant connection state:
>> associated -> 4-way handshake
>> 
>> NetworkManager: <info>  (ra0): supplicant connection state:  4-way
>> handshake -> group handshake
>> NetworkManager: <info>  (ra0): supplicant connection state:  4-way
>> handshake -> group handshake
>> 
>> WPA: Key negotiation completed with 00:1c:b0:91:6e:8c [PTK=CCMP
>> GTK=TKIP]
>> CTRL-EVENT-CONNECTED - Connection to 00:1c:b0:91:6e:8c completed
>> (auth) [id=0 id_str=]
>> NetworkManager: <info>  (ra0): supplicant connection state:  group
>> handshake -> completed
>> NetworkManager: <info>  (ra0): supplicant connection state:  group
>> handshake -> completed
>> 
>> NetworkManager: <info>  Activation (ra0/wireless) Stage 2 of 5 (Device
>> Configure) successful.  Connected to wireless network 'midfun'.
>> NetworkManager: <info>  Activation (ra0/wireless) Stage 2 of 5 (Device
>> Configure) successful.  Connected to wireless network 'midfun'.
>> 
>> NetworkManager: <info>  Activation (ra0) Stage 3 of 5 (IP Configure
>> Start) scheduled.
>> NetworkManager: <info>  Activation (ra0) Stage 3 of 5 (IP Configure
>> Start) scheduled.
>> 
>> NetworkManager: <info>  Activation (ra0) Stage 3 of 5 (IP Configure
>> Start) started...
>> NetworkManager: <info>  Activation (ra0) Stage 3 of 5 (IP Configure
>> Start) started...
>> 
>> NetworkManager: <info>  (ra0): device state change: 5 -> 7
>> NetworkManager: <info>  (ra0): device state change: 5 -> 7
>> 
>> NetworkManager: <info>  Activation (ra0) Beginning DHCP transaction.
>> NetworkManager: <info>  Activation (ra0) Beginning DHCP transaction.
>> 
>> Internet Systems Consortium DHCP Client V3.0.2
>> Copyright 2004 Internet Systems Consortium.
>> All rights reserved.
>> For info, please visit http://www.isc.org/products/DHCP
>> 
>> NetworkManager: <info>  dhclient started with pid 2106
>> NetworkManager: <info>  dhclient started with pid 2106
>> 
>> NetworkManager: <info>  Activation (ra0) Stage 3 of 5 (IP Configure
>> Start) complete.
>> NetworkManager: <info>  Activation (ra0) Stage 3 of 5 (IP Configure
>> Start) complete.
>> 
>> can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file or
>> directory
>> NetworkManager: <info>  DHCP: device ra0 state changed (null) ->
>> preinit
>> NetworkManager: <info>  DHCP: device ra0 state changed (null) ->
>> preinit
>> 
>> Listening on LPF/ra0/00:03:19:94:00:4c
>> Sending on   LPF/ra0/00:03:19:94:00:4c
>> Sending on   Socket/fallback
>> 
>> 
>> NetworkManager: <WARN>  nm_signal_handler(): Caught signal 2, shutting
>> down normally.
>> NetworkManager: <WARN>  nm_signal_handler(): Caught signal 2, shutting
>> down normally.
>> 
>> NetworkManager: <info>  (eth0): now unmanaged
>> NetworkManager: <info>  (eth0): now unmanaged
>> 
>> NetworkManager: <info>  (eth0): device state change: 3 -> 1
>> NetworkManager: <info>  (eth0): device state change: 3 -> 1
>> 
>> NetworkManager: <info>  (eth0): cleaning up...
>> NetworkManager: <info>  (eth0): cleaning up...
>> 
>> NetworkManager: <info>  (eth0): taking down device.
>> NetworkManager: <info>  (eth0): taking down device.
>> 
>> NetworkManager: <info>  (ra0): now unmanaged
>> NetworkManager: <info>  (ra0): now unmanaged
>> 
>> NetworkManager: <info>  (ra0): device state change: 7 -> 1
>> NetworkManager: <info>  (ra0): device state change: 7 -> 1
>> 
>> NetworkManager: <info>  (ra0): deactivating device (reason: 36).
>> NetworkManager: <info>  (ra0): deactivating device (reason: 36).
>> 
>> NetworkManager: <info>  ra0: canceled DHCP transaction, dhcp client
>> pid 2106
>> NetworkManager: <info>  ra0: canceled DHCP transaction, dhcp client
>> pid 2106
>> 
>> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>> NetworkManager: <info>  (ra0): cleaning up...
>> NetworkManager: <info>  (ra0): cleaning up...
>> 
>> NetworkManager: <info>  (ra0): taking down device.
>> NetworkManager: <info>  (ra0): taking down device.
>> 
>> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>> Terminate the task(RtmpMlmeTask) with pid(2104)!
>> Terminate the task(RtmpCmdQTask) with pid(2105)!
>> Terminate the task(RtmpTimerTask) with pid(2103)!
>> ---> RTMPFreeTxRxRingMemory
>> <--- RTMPFreeTxRxRingMemory
>> ioctl[SIOCSIWENCODEEXT]: Network is down
>> ioctl[SIOCSIWENCODEEXT]: Network is down
>> ioctl[SIOCSIWENCODEEXT]: Network is down
>> ioctl[SIOCSIWENCODEEXT]: Network is down
>> ioctl[SIOCSIWENCODEEXT]: Network is down
>> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>> ioctl[SIOCSIWENCODEEXT]: Network is down
>> ioctl[SIOCSIWENCODEEXT]: Network is down
>> ioctl[SIOCSIWENCODEEXT]: Network is down
>> ioctl[SIOCSIWENCODEEXT]: Network is down
>> ioctl[SIOCSIWENCODEEXT]: Network is down
>> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
>> ioctl[SIOCSIWENCODEEXT]: Network is down
>> ioctl[SIOCSIWENCODEEXT]: Network is down
>> ioctl[SIOCSIWENCODEEXT]: Network is down
>> ioctl[SIOCSIWENCODEEXT]: Network is down
>> ioctl[SIOCSIWENCODEEXT]: Network is down
>> l2_packet_receive - recvfrom: Network is down
>> ioctl[SIOCSIWAUTH]: Network is down
>> WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver.
>> ioctl[SIOCSIWAUTH]: Network is down
>> WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Network is down
>> WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAP]: Network is down
>> NetworkManager: <info>  exiting (success)
>> NetworkManager: <info>  exiting (success)
>> 
>> 
>> ** (nm-applet:1964): WARNING **: _nm_object_get_property: Error
>> getting 'ActiveAccessPoint'
>> for /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0: Message
>> did not receive a reply (timeout by message bus)
>> 
>> real    1m 59.86s
>> user    0m 0.48s
>> sys    0m 0.21s
>> root@localhost:/# ** Message: NM disappeared
>> 
>> 
>> 
>> 
>> 
>> 在2009-11-02 18:23:50，"tommy.hong" <hongjiujing@...> 写道：
>>         
>>         root@localhost:/# NetworkManager --no-daemon
>>         NetworkManager: <info>  starting...
>>         NetworkManager: <info>  starting...
>>         
>>         ifup: interface lo already configured
>>         NetworkManager: <info>  (eth0): driver 'dm9000' does not
>>         support carrier detection.
>>             You must switch to it manually.
>>         NetworkManager: <info>  (eth0): driver 'dm9000' does not
>>         support carrier detection.
>>             You must switch to it manually.
>>         
>>         NetworkManager: <info>  (eth0): new Ethernet device (driver:
>>         'dm9000')
>>         NetworkManager: <info>  (eth0): new Ethernet device (driver:
>>         'dm9000')
>>         
>>         NetworkManager: <info>  (eth0): exported
>>         as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa
>>         NetworkManager: <info>  (eth0): exported
>>         as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa
>>         
>>         NetworkManager: <info>  (ra0): driver does not support SSID
>>         scans (scan_capa 0x00).
>>         NetworkManager: <info>  (ra0): driver does not support SSID
>>         scans (scan_capa 0x00).
>>         
>>         NetworkManager: <info>  (ra0): new 802.11 WiFi device (driver:
>>         'usb')
>>         NetworkManager: <info>  (ra0): new 802.11 WiFi device (driver:
>>         'usb')
>>         
>>         NetworkManager: <info>  (ra0): exported
>>         as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0
>>         NetworkManager: <info>  (ra0): exported
>>         as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0
>>         
>>         udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3_serial_unknown_3, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3
>>         serial_device: /dev/s3c_serial3, driver: s3c-uart
>>         ttyname: s3c_serial3
>>         sysfs_path get udev
>>         proped: /sys/devices/platform/s3c-uart.3/tty/s3c_serial3 
>>         libudev: 1, gsm: 0, cdma: 0
>>         hal get : gsm: 0, cdma: 0
>>         NetworkManager: <info>  (s3c_serial3): ignoring due to lack of
>>         mobile broadband capabilties
>>         NetworkManager: <info>  (s3c_serial3): ignoring due to lack of
>>         mobile broadband capabilties
>>         
>>         udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2_serial_unknown_2, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2
>>         serial_device: /dev/s3c_serial2, driver: s3c-uart
>>         ttyname: s3c_serial2
>>         sysfs_path get udev
>>         proped: /sys/devices/platform/s3c-uart.2/tty/s3c_serial2 
>>         libudev: 1, gsm: 0, cdma: 0
>>         hal get : gsm: 0, cdma: 0
>>         NetworkManager: <info>  (s3c_serial2): ignoring due to lack of
>>         mobile broadband capabilties
>>         NetworkManager: <info>  (s3c_serial2): ignoring due to lack of
>>         mobile broadband capabilties
>>         
>>         udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1_serial_unknown_1, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1
>>         serial_device: /dev/s3c_serial1, driver: s3c-uart
>>         ttyname: s3c_serial1
>>         sysfs_path get udev
>>         proped: /sys/devices/platform/s3c-uart.1/tty/s3c_serial1 
>>         libudev: 1, gsm: 0, cdma: 0
>>         hal get : gsm: 0, cdma: 0
>>         NetworkManager: <info>  (s3c_serial1): ignoring due to lack of
>>         mobile broadband capabilties
>>         NetworkManager: <info>  (s3c_serial1): ignoring due to lack of
>>         mobile broadband capabilties
>>         
>>         udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0_serial_unknown_0, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0
>>         serial_device: /dev/s3c_serial0, driver: s3c-uart
>>         ttyname: s3c_serial0
>>         sysfs_path get udev
>>         proped: /sys/devices/platform/s3c-uart.0/tty/s3c_serial0 
>>         libudev: 1, gsm: 0, cdma: 0
>>         hal get : gsm: 0, cdma: 0
>>         NetworkManager: <info>  (s3c_serial0): ignoring due to lack of
>>         mobile broadband capabilties
>>         NetworkManager: <info>  (s3c_serial0): ignoring due to lack of
>>         mobile broadband capabilties
>>         
>>         NetworkManager: <info>  Trying to start the system settings
>>         daemon...
>>         NetworkManager: <info>  Trying to start the system settings
>>         daemon...
>>         
>>         ** Message: NM appeared
>>         NetworkManager: <info>  (eth0): device state change: 1 -> 2
>>         NetworkManager: <info>  (eth0): device state change: 1 -> 2
>>         
>>         NetworkManager: <info>  (eth0): preparing device.
>>         NetworkManager: <info>  (eth0): preparing device.
>>         
>>         NetworkManager: <info>  (eth0): deactivating device (reason:
>>         2).
>>         NetworkManager: <info>  (eth0): deactivating device (reason:
>>         2).
>>         
>>         NetworkManager: <info>  (eth0): device state change: 2 -> 3
>>         NetworkManager: <info>  (eth0): device state change: 2 -> 3
>>         
>>         NetworkManager: <info>  (ra0): device state change: 1 -> 2
>>         NetworkManager: <info>  (ra0): device state change: 1 -> 2
>>         
>>         NetworkManager: <info>  (ra0): bringing up device.
>>         NetworkManager: <info>  (ra0): bringing up device.
>>         
>>         <-- RTMPAllocTxRxRingMemory, Status=0
>>         -->RTUSBVenderReset
>>         <--RTUSBVenderReset
>>         Key1Str is Invalid key length(0) or Type(0)
>>         Key2Str is Invalid key length(0) or Type(0)
>>         Key3Str is Invalid key length(0) or Type(0)
>>         Key4Str is Invalid key length(0) or Type(0)
>>         1. Phy Mode = 9
>>         2. Phy Mode = 9
>>         3. Phy Mode = 9
>>         RTMPSetPhyMode: channel is out of range, use first channel=1 
>>         MCS Set = ff 00 00 00 01
>>         <==== rt28xx_init, Status=0
>>         0x1300 = 00064300
>>         NetworkManager: <info>  (ra0): preparing device.
>>         NetworkManager: <info>  (ra0): preparing device.
>>         
>>         NetworkManager: <info>  (ra0): deactivating device (reason:
>>         2).
>>         NetworkManager: <info>  (ra0): deactivating device (reason:
>>         2).
>>         
>>         NetworkManager: <info>  (ra0): device state change: 2 -> 3
>>         NetworkManager: <info>  (ra0): device state change: 2 -> 3
>>         
>>         ioctl[SIOCSIWAUTH]: Operation not supported
>>         WEXT auth param 4 value 0x0 - NetworkManager: <info>  (ra0):
>>         supplicant interface state:  starting -> ready
>>         NetworkManager: <info>  (ra0): supplicant interface state:
>>         starting -> ready
>>         
>>         ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>>         power off backlight
>>         ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>>         ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>>         ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>>         ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666
>>         NetworkManager: <info>  Activation (ra0) starting connection
>>         'Auto midfun'
>>         NetworkManager: <info>  Activation (ra0) starting connection
>>         'Auto midfun'
>>         
>>         NetworkManager: <info>  (ra0): device state change: 3 -> 4
>>         NetworkManager: <info>  (ra0): device state change: 3 -> 4
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device
>>         Prepare) scheduled...
>>         NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device
>>         Prepare) scheduled...
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device
>>         Prepare) started...
>>         NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device
>>         Prepare) started...
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>>         Configure) scheduled...
>>         NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>>         Configure) scheduled...
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device
>>         Prepare) complete.
>>         NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device
>>         Prepare) complete.
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>>         Configure) starting...
>>         NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>>         Configure) starting...
>>         
>>         NetworkManager: <info>  (ra0): device state change: 4 -> 5
>>         NetworkManager: <info>  (ra0): device state change: 4 -> 5
>>         
>>         NetworkManager: <info>  Activation (ra0/wireless): access
>>         point 'Auto midfun' has security, but secrets are required.
>>         NetworkManager: <info>  Activation (ra0/wireless): access
>>         point 'Auto midfun' has security, but secrets are required.
>>         
>>         NetworkManager: <info>  (ra0): device state change: 5 -> 6
>>         NetworkManager: <info>  (ra0): device state change: 5 -> 6
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>>         Configure) complete.
>>         NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>>         Configure) complete.
>>         
>>         
>>         ** (nm-applet:1964): WARNING **: <WARN>
>>         nm_gconf_get_keyring_items():
>>         key: /system/networking/private-data/229b9125-d1af-40dd-aa4d-8974724d16b0/802-11-wireless-security/psk
>>         
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device
>>         Prepare) scheduled...
>>         NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device
>>         Prepare) scheduled...
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device
>>         Prepare) started...
>>         NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device
>>         Prepare) started...
>>         
>>         NetworkManager: <info>  (ra0): device state change: 6 -> 4
>>         NetworkManager: <info>  (ra0): device state change: 6 -> 4
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>>         Configure) scheduled...
>>         NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>>         Configure) scheduled...
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device
>>         Prepare) complete.
>>         NetworkManager: <info>  Activation (ra0) Stage 1 of 5 (Device
>>         Prepare) complete.
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>>         Configure) starting...
>>         NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>>         Configure) starting...
>>         
>>         NetworkManager: <info>  (ra0): device state change: 4 -> 5
>>         NetworkManager: <info>  (ra0): device state change: 4 -> 5
>>         
>>         NetworkManager: <info>  Activation (ra0/wireless): connection
>>         'Auto midfun' has security, and secrets exist.  No new secrets
>>         needed.
>>         NetworkManager: <info>  Activation (ra0/wireless): connection
>>         'Auto midfun' has security, and secrets exist.  No new secrets
>>         needed.
>>         
>>         NetworkManager: <info>  Config: added 'ssid' value 'midfun'
>>         NetworkManager: <info>  Config: added 'ssid' value 'midfun'
>>         
>>         NetworkManager: <info>  Config: added 'scan_ssid' value '1'
>>         NetworkManager: <info>  Config: added 'scan_ssid' value '1'
>>         
>>         NetworkManager: <info>  Config: added 'key_mgmt' value
>>         'WPA-PSK'
>>         NetworkManager: <info>  Config: added 'key_mgmt' value
>>         'WPA-PSK'
>>         
>>         NetworkManager: <info>  Config: added 'psk' value '<omitted>'
>>         NetworkManager: <info>  Config: added 'psk' value '<omitted>'
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>>         Configure) complete.
>>         NetworkManager: <info>  Activation (ra0) Stage 2 of 5 (Device
>>         Configure) complete.
>>         
>>         NetworkManager: <info>  Config: set interface ap_scan to 1
>>         NetworkManager: <info>  Config: set interface ap_scan to 1
>>         
>>         NetworkManager: <info>  (ra0): supplicant connection state:
>>         scanning -> disconnected
>>         NetworkManager: <info>  (ra0): supplicant connection state:
>>         scanning -> disconnected
>>         
>>         NetworkManager: <info>  (ra0): supplicant connection state:
>>         disconnected -> scanning
>>         NetworkManager: <info>  (ra0): supplicant connection state:
>>         disconnected -> scanning
>>         
>>         ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>>         ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 490
>>         ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
>>         Trying to associate with 00:1c:b0:91:6e:8c (SSID='midfun'
>>         freq=2437 MHz)
>>         NetworkManager: <info>  (ra0): supplicant connection state:
>>         scanning -> associating
>>         NetworkManager: <info>  (ra0): supplicant connection state:
>>         scanning -> associating
>>         
>>         Associated with 00:1c:b0:91:6e:8c
>>         NetworkManager: <info>  (ra0): supplicant connection state:
>>         associating -> associated
>>         NetworkManager: <info>  (ra0): supplicant connection state:
>>         associating -> associated
>>         
>>         NetworkManager: <info>  (ra0): supplicant connection state:
>>         associated -> 4-way handshake
>>         NetworkManager: <info>  (ra0): supplicant connection state:
>>         associated -> 4-way handshake
>>         
>>         NetworkManager: <info>  (ra0): supplicant connection state:
>>         4-way handshake -> group handshake
>>         NetworkManager: <info>  (ra0): supplicant connection state:
>>         4-way handshake -> group handshake
>>         
>>         WPA: Key negotiation completed with 00:1c:b0:91:6e:8c
>>         [PTK=CCMP GTK=TKIP]
>>         CTRL-EVENT-CONNECTED - Connection to 00:1c:b0:91:6e:8c
>>         completed (auth) [id=0 id_str=]
>>         NetworkManager: <info>  (ra0): supplicant connection state:
>>         group handshake -> completed
>>         NetworkManager: <info>  (ra0): supplicant connection state:
>>         group handshake -> completed
>>         
>>         NetworkManager: <info>  Activation (ra0/wireless) Stage 2 of 5
>>         (Device Configure) successful.  Connected to wireless network
>>         'midfun'.
>>         NetworkManager: <info>  Activation (ra0/wireless) Stage 2 of 5
>>         (Device Configure) successful.  Connected to wireless network
>>         'midfun'.
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 3 of 5 (IP
>>         Configure Start) scheduled.
>>         NetworkManager: <info>  Activation (ra0) Stage 3 of 5 (IP
>>         Configure Start) scheduled.
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 3 of 5 (IP
>>         Configure Start) started...
>>         NetworkManager: <info>  Activation (ra0) Stage 3 of 5 (IP
>>         Configure Start) started...
>>         
>>         NetworkManager: <info>  (ra0): device state change: 5 -> 7
>>         NetworkManager: <info>  (ra0): device state change: 5 -> 7
>>         
>>         NetworkManager: <info>  Activation (ra0) Beginning DHCP
>>         transaction.
>>         NetworkManager: <info>  Activation (ra0) Beginning DHCP
>>         transaction.
>>         
>>         NetworkManager: <info>  dhclient started with pid 2044
>>         NetworkManager: <info>  dhclient started with pid 2044
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 3 of 5 (IP
>>         Configure Start) complete.
>>         NetworkManager: <info>  Activation (ra0) Stage 3 of 5 (IP
>>         Configure Start) complete.
>>         
>>         Internet Systems Consortium DHCP Client V3.0.2
>>         Copyright 2004 Internet Systems Consortium.
>>         All rights reserved.
>>         For info, please visit http://www.isc.org/products/DHCP
>>         
>>         can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file
>>         or directory
>>         NetworkManager: <info>  DHCP: device ra0 state changed (null)
>>         -> preinit
>>         NetworkManager: <info>  DHCP: device ra0 state changed (null)
>>         -> preinit
>>         
>>         Listening on LPF/ra0/00:03:19:94:00:4c
>>         Sending on   LPF/ra0/00:03:19:94:00:4c
>>         Sending on   Socket/fallback
>>         DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 7
>>         DHCPOFFER from 192.168.1.2
>>         DHCPREQUEST on ra0 to 255.255.255.255 port 67
>>         DHCPACK from 192.168.1.2
>>         NetworkManager: <info>  DHCP: device ra0 state changed preinit
>>         -> bound
>>         NetworkManager: <info>  DHCP: device ra0 state changed preinit
>>         -> bound
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 4 of 5 (IP
>>         Configure Get) scheduled...
>>         NetworkManager: <info>  Activation (ra0) Stage 4 of 5 (IP
>>         Configure Get) scheduled...
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 4 of 5 (IP
>>         Configure Get) started...
>>         NetworkManager: <info>  Activation (ra0) Stage 4 of 5 (IP
>>         Configure Get) started...
>>         
>>         NetworkManager: <info>    address 192.168.1.114
>>         NetworkManager: <info>    address 192.168.1.114
>>         
>>         NetworkManager: <info>    prefix 24 (255.255.255.0)
>>         NetworkManager: <info>    prefix 24 (255.255.255.0)
>>         
>>         NetworkManager: <info>    gateway 192.168.1.2
>>         NetworkManager: <info>    gateway 192.168.1.2
>>         
>>         NetworkManager: <info>    nameserver '192.168.1.2'
>>         NetworkManager: <info>    nameserver '192.168.1.2'
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 5 of 5 (IP
>>         Configure Commit) scheduled...
>>         NetworkManager: <info>  Activation (ra0) Stage 5 of 5 (IP
>>         Configure Commit) scheduled...
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 4 of 5 (IP
>>         Configure Get) complete.
>>         NetworkManager: <info>  Activation (ra0) Stage 4 of 5 (IP
>>         Configure Get) complete.
>>         
>>         can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file
>>         or directory
>>         bound to 192.168.1.114 -- renewal in 40639 seconds.
>>         NetworkManager: <info>  Activation (ra0) Stage 5 of 5 (IP
>>         Configure Commit) started...
>>         NetworkManager: <info>  Activation (ra0) Stage 5 of 5 (IP
>>         Configure Commit) started...
>>         
>>         NetworkManager: <info>  (ra0): device state change: 7 -> 8
>>         NetworkManager: <info>  (ra0): device state change: 7 -> 8
>>         
>>         NetworkManager: <info>  Policy set 'Auto midfun' (ra0) as
>>         default for routing and DNS.
>>         NetworkManager: <info>  Policy set 'Auto midfun' (ra0) as
>>         default for routing and DNS.
>>         
>>         NetworkManager: <info>  Activation (ra0) successful, device
>>         activated.
>>         NetworkManager: <info>  Activation (ra0) successful, device
>>         activated.
>>         
>>         NetworkManager: <info>  Activation (ra0) Stage 5 of 5 (IP
>>         Configure Commit) complete.
>>         NetworkManager: <info>  Activation (ra0) Stage 5 of 5 (IP
>>         Configure Commit) complete.
>>         
>>         NetworkManager: <info>  Trying to start the system settings
>>         daemon...
>>         NetworkManager: <info>  Trying to start the system settings
>>         daemon...
>>         
>>         ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>>         ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666
>>         
>>         
>>         
>>         
>>         在2009-11-02 17:33:31，"tommy.hong" <hongjiujing@...> 写
>>         道：
>>                 
>>                 Platform :arm11
>>                 Networkmanager version :networkmanager 0.7.1
>>                 
>>                 Linux kerne:2.6.24.2
>>                 
>>                 USB wifi :rtl3070
>>                 
>>                 Why Networkmanager gets AP need several time?
>>                 
>>                 
>>                 
>>                 root@localhost:/# /etc/init.d/NetworkManager restart
>>                 Stopping NetworkManager daemon: NetworkManagersh: you
>>                 need to specify whom to kill
>>                 .
>>                 CTRL-EVENT-TERMINATING - signal 15 received
>>                 ioctl[SIOCSIWAUTH]: Operation not supported
>>                 WEXT auth param 4 value 0x0 - 
>>                 Starting NetworkManager daemon:
>>                 NetworkManagerdbus_bus_request_name[dbus]: Resource
>>                 temporarily unavailable
>>                 Could not request DBus service name: already
>>                 registered.
>>                 Failed to initialize wpa_supplicant
>>                 .
>>                 root@localhost:/# Terminate the task(RtmpMlmeTask)
>>                 with pid(2131)!
>>                 Terminate the task(RtmpCmdQTask) with pid(2132)!
>>                 Terminate the task(RtmpTimerTask) with pid(2130)!
>>                 ---> RTMPFreeTxRxRingMemory
>>                 <--- RTMPFreeTxRxRingMemory
>>                 ** Message: NM appeared
>>                 \
>>                 > 
>>                 root@localhost:/# <-- RTMPAllocTxRxRingMemory,
>>                 Status=0
>>                 -->RTUSBVenderReset
>>                 <--RTUSBVenderReset
>>                 
>>                 root@localhost:/# 
>>                 root@localhost:/# 
>>                 root@localhost:/# 
>>                 root@localhost:/# Key1Str is Invalid key length(0) or
>>                 Type(0)
>>                 Key2Str is Invalid key length(0) or Type(0)
>>                 Key3Str is Invalid key length(0) or Type(0)
>>                 Key4Str is Invalid key length(0) or Type(0)
>>                 1. Phy Mode = 9
>>                 2. Phy Mode = 9
>>                 3. Phy Mode = 9
>>                 RTMPSetPhyMode: channel is out of range, use first
>>                 channel=1 
>>                 MCS Set = ff 00 00 00 01
>>                 
>>                 RTMPFilterCalibration - can't find a valid value,
>>                 loopcnt=102 stop calibrating<==== rt28xx_init,
>>                 Status=0
>>                 0x1300 = 00064300
>>                 
>>                 ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>>                 ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>>                 ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>>                 ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>>                 ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
>>                 
>>                 
>>                 need several minutes to get AP!
>>                 
>>                 but :
>>                 
>>                 root@localhost:/new3gdriver/image/sbin# ./iwlist ra0
>>                 scanning
>>                 ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length
>>                 = 766
>>                 ra0       Scan completed :
>>                           Cell 01 - Address: 00:14:78:CB:E7:06
>>                                     Protocol:802.11b/g
>>                                     ESSID:"XIZIIUK-NJ"
>>                                     Mode:Managed
>>                                     Channel:6
>>                                     Quality:13/100  Signal level:-85
>>                 dBm  Noise level:-115 dBm
>>                                     Encryption key:on
>>                                     Bit Rates:36 Mb/s
>>                                     IE: WPA Version 1
>>                                         Group Cipher : TKIP
>>                                         Pairwise Ciphers (2) : TKIP
>>                 CCMP
>>                                         Authentication Suites (1) :
>>                 PSK
>>                                     IE: IEEE 802.11i/WPA2 Version 1
>>                                         Group Cipher : TKIP
>>                                         Pairwise Ciphers (2) : TKIP
>>                 CCMP
>>                                         Authentication Suites (1) :
>>                 PSK
>>                                        Preauthentication Supported
>>                           Cell 02 - Address: 00:23:CD:48:D6:6A
>>                                     Protocol:802.11b/g
>>                                     ESSID:"TP-LINK_48D66A"
>>                                     Mode:Managed
>>                                     Channel:6
>>                                     Quality:7/100  Signal level:-87
>>                 dBm  Noise level:-115 dBm
>>                                     Encryption key:on
>>                                     Bit Rates:36 Mb/s
>>                           Cell 03 - Address: 00:1C:B0:91:6E:8C
>>                                     Protocol:802.11g
>>                                     ESSID:"xxxx"
>>                                     Mode:Managed
>>                                     Channel:6
>>                                     Quality:63/100  Signal level:-65
>>                 dBm  Noise level:-115 dBm
>>                                     Encryption key:on
>>                                     Bit Rates:11 Mb/s
>>                                     IE: WPA Version 1
>>                                         Group Cipher : TKIP
>>                                         Pairwise Ciphers (2) : TKIP
>>                 CCMP
>>                                         Authentication Suites (1) :
>>                 PSK
>>                                     IE: IEEE 802.11i/WPA2 Version 1
>>                                         Group Cipher : TKIP
>>                                         Pairwise Ciphers (2) : TKIP
>>                 CCMP
>>                                         Authentication Suites (1) :
>>                 PSK
>>                           Cell 04 - Address: 00:23:CD:E7:F3:9E
>>                                     Protocol:802.11b/g
>>                                     ESSID:"TP-123"
>>                                     Mode:Managed
>>                                     Channel:6
>>                                     Quality:0/100  Signal level:-91
>>                 dBm  Noise level:-115 dBm
>>                                     Encryption key:on
>>                                     Bit Rates:36 Mb/s
>>                           Cell 05 - Address: 02:80:D1:C8:32:12
>>                                     Protocol:802.11b
>>                                     ESSID:"axel"
>>                                     Mode:Ad-Hoc
>>                                     Channel:11
>>                                     Quality:7/100  Signal level:-87
>>                 dBm  Noise level:-115 dBm
>>                                     Encryption key:off
>>                                     Bit Rates:11 Mb/s
>>                           Cell 06 - Address: 02:1B:77:00:00:C8
>>                                     Protocol:802.11b/g
>>                                     ESSID:"LocalGroup"
>>                                     Mode:Ad-Hoc
>>                                     Channel:11
>>                                     Quality:13/100  Signal level:-85
>>                 dBm  Noise level:-115 dBm
>>                                     Encryption key:off
>>                                     Bit Rates:11 Mb/s
>>                 
>>                 can get AP quickly ?
>>                 
>>                 
>>                 I guess it is a driver or H/W issue ?
>>                 
>>                 Tommy
>>                 
>>                 
>>                 
>>                 
>>                 
>>                 
>>                 
>>                 
>>                 
>>                 
>>                 
>>                 
>>                 ______________________________________________________
>>                 09年新晋3D主流网游《天下贰》，网易六年亿资打造
>>         
>>         
>>         
>>         ______________________________________________________________
>>         09年新晋3D主流网游《天下贰》，网易六年亿资打造
>> 
>> 
>> 
>> ______________________________________________________________________
>> "雪见"杨幂邀你共品3D国韵网游《天下贰》，海报免费领
>> _______________________________________________
>> NetworkManager-list mailing list
>> NetworkManager-list@...
>> http://mail.gnome.org/mailman/listinfo/networkmanager-list
>

	Why Networkmanager gets AP need several time? by tommy.hong :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message Platform :arm11 Networkmanager version :networkmanager 0.7.1 Linux kerne:2.6.24.2 USB wifi :rtl3070 Why Networkmanager gets AP need several time? root@localhost:/# /etc/init.d/NetworkManager restart Stopping NetworkManager daemon: NetworkManagersh: you need to specify whom to kill . CTRL-EVENT-TERMINATING - signal 15 received ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 4 value 0x0 - Starting NetworkManager daemon: NetworkManagerdbus_bus_request_name[dbus]: Resource temporarily unavailable Could not request DBus service name: already registered. Failed to initialize wpa_supplicant . root@localhost:/# Terminate the task(RtmpMlmeTask) with pid(2131)! Terminate the task(RtmpCmdQTask) with pid(2132)! Terminate the task(RtmpTimerTask) with pid(2130)! ---> RTMPFreeTxRxRingMemory <--- RTMPFreeTxRxRingMemory ** Message: NM appeared \ > root@localhost:/# <-- RTMPAllocTxRxRingMemory, Status=0 -->RTUSBVenderReset <--RTUSBVenderReset root@localhost:/# root@localhost:/# root@localhost:/# root@localhost:/# Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) 1. Phy Mode = 9 2. Phy Mode = 9 3. Phy Mode = 9 RTMPSetPhyMode: channel is out of range, use first channel=1 MCS Set = ff 00 00 00 01 RTMPFilterCalibration - can't find a valid value, loopcnt=102 stop calibrating<==== rt28xx_init, Status=0 0x1300 = 00064300 ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable need several minutes to get AP! but : root@localhost:/new3gdriver/image/sbin# ./iwlist ra0 scanning ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 766 ra0 Scan completed : Cell 01 - Address: 00:14:78:CB:E7:06 Protocol:802.11b/g ESSID:"XIZIIUK-NJ" Mode:Managed Channel:6 Quality:13/100 Signal level:-85 dBm Noise level:-115 dBm Encryption key:on Bit Rates:36 Mb/s IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Preauthentication Supported Cell 02 - Address: 00:23:CD:48:D6:6A Protocol:802.11b/g ESSID:"TP-LINK_48D66A" Mode:Managed Channel:6 Quality:7/100 Signal level:-87 dBm Noise level:-115 dBm Encryption key:on Bit Rates:36 Mb/s Cell 03 - Address: 00:1C:B0:91:6E:8C Protocol:802.11g ESSID:"xxxx" Mode:Managed Channel:6 Quality:63/100 Signal level:-65 dBm Noise level:-115 dBm Encryption key:on Bit Rates:11 Mb/s IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Cell 04 - Address: 00:23:CD:E7:F3:9E Protocol:802.11b/g ESSID:"TP-123" Mode:Managed Channel:6 Quality:0/100 Signal level:-91 dBm Noise level:-115 dBm Encryption key:on Bit Rates:36 Mb/s Cell 05 - Address: 02:80:D1:C8:32:12 Protocol:802.11b ESSID:"axel" Mode:Ad-Hoc Channel:11 Quality:7/100 Signal level:-87 dBm Noise level:-115 dBm Encryption key:off Bit Rates:11 Mb/s Cell 06 - Address: 02:1B:77:00:00:C8 Protocol:802.11b/g ESSID:"LocalGroup" Mode:Ad-Hoc Channel:11 Quality:13/100 Signal level:-85 dBm Noise level:-115 dBm Encryption key:off Bit Rates:11 Mb/s can get AP quickly ? I guess it is a driver or H/W issue ? Tommy 09年新晋3D主流网游《天下贰》，网易六年亿资打造 _______________________________________________ NetworkManager-list mailing list NetworkManager-list@... http://mail.gnome.org/mailman/listinfo/networkmanager-list
	Re:Why Networkmanager gets AP need several time? by tommy.hong :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message root@localhost:/# NetworkManager --no-daemon NetworkManager: <info> starting... NetworkManager: <info> starting... ifup: interface lo already configured NetworkManager: <info> (eth0): driver 'dm9000' does not support carrier detection. You must switch to it manually. NetworkManager: <info> (eth0): driver 'dm9000' does not support carrier detection. You must switch to it manually. NetworkManager: <info> (eth0): new Ethernet device (driver: 'dm9000') NetworkManager: <info> (eth0): new Ethernet device (driver: 'dm9000') NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa NetworkManager: <info> (ra0): driver does not support SSID scans (scan_capa 0x00). NetworkManager: <info> (ra0): driver does not support SSID scans (scan_capa 0x00). NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'usb') NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'usb') NetworkManager: <info> (ra0): exported as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 NetworkManager: <info> (ra0): exported as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3_serial_unknown_3, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3 serial_device: /dev/s3c_serial3, driver: s3c-uart ttyname: s3c_serial3 sysfs_path get udev proped: /sys/devices/platform/s3c-uart.3/tty/s3c_serial3 libudev: 1, gsm: 0, cdma: 0 hal get : gsm: 0, cdma: 0 NetworkManager: <info> (s3c_serial3): ignoring due to lack of mobile broadband capabilties NetworkManager: <info> (s3c_serial3): ignoring due to lack of mobile broadband capabilties udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2_serial_unknown_2, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2 serial_device: /dev/s3c_serial2, driver: s3c-uart ttyname: s3c_serial2 sysfs_path get udev proped: /sys/devices/platform/s3c-uart.2/tty/s3c_serial2 libudev: 1, gsm: 0, cdma: 0 hal get : gsm: 0, cdma: 0 NetworkManager: <info> (s3c_serial2): ignoring due to lack of mobile broadband capabilties NetworkManager: <info> (s3c_serial2): ignoring due to lack of mobile broadband capabilties udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1_serial_unknown_1, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1 serial_device: /dev/s3c_serial1, driver: s3c-uart ttyname: s3c_serial1 sysfs_path get udev proped: /sys/devices/platform/s3c-uart.1/tty/s3c_serial1 libudev: 1, gsm: 0, cdma: 0 hal get : gsm: 0, cdma: 0 NetworkManager: <info> (s3c_serial1): ignoring due to lack of mobile broadband capabilties NetworkManager: <info> (s3c_serial1): ignoring due to lack of mobile broadband capabilties udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0_serial_unknown_0, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0 serial_device: /dev/s3c_serial0, driver: s3c-uart ttyname: s3c_serial0 sysfs_path get udev proped: /sys/devices/platform/s3c-uart.0/tty/s3c_serial0 libudev: 1, gsm: 0, cdma: 0 hal get : gsm: 0, cdma: 0 NetworkManager: <info> (s3c_serial0): ignoring due to lack of mobile broadband capabilties NetworkManager: <info> (s3c_serial0): ignoring due to lack of mobile broadband capabilties NetworkManager: <info> Trying to start the system settings daemon... NetworkManager: <info> Trying to start the system settings daemon... Message: NM appeared NetworkManager: <info> (eth0): device state change: 1 -> 2 NetworkManager: <info> (eth0): device state change: 1 -> 2 NetworkManager: <info> (eth0): preparing device. NetworkManager: <info> (eth0): preparing device. NetworkManager: <info> (eth0): deactivating device (reason: 2). NetworkManager: <info> (eth0): deactivating device (reason: 2). NetworkManager: <info> (eth0): device state change: 2 -> 3 NetworkManager: <info> (eth0): device state change: 2 -> 3 NetworkManager: <info> (ra0): device state change: 1 -> 2 NetworkManager: <info> (ra0): device state change: 1 -> 2 NetworkManager: <info> (ra0): bringing up device. NetworkManager: <info> (ra0): bringing up device. <-- RTMPAllocTxRxRingMemory, Status=0 -->RTUSBVenderReset <--RTUSBVenderReset Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) 1. Phy Mode = 9 2. Phy Mode = 9 3. Phy Mode = 9 RTMPSetPhyMode: channel is out of range, use first channel=1 MCS Set = ff 00 00 00 01 <==== rt28xx_init, Status=0 0x1300 = 00064300 NetworkManager: <info> (ra0): preparing device. NetworkManager: <info> (ra0): preparing device. NetworkManager: <info> (ra0): deactivating device (reason: 2). NetworkManager: <info> (ra0): deactivating device (reason: 2). NetworkManager: <info> (ra0): device state change: 2 -> 3 NetworkManager: <info> (ra0): device state change: 2 -> 3 ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 4 value 0x0 - NetworkManager: <info> (ra0): supplicant interface state: starting -> ready NetworkManager: <info> (ra0): supplicant interface state: starting -> ready ioctl[SIOCGIWSCAN]: Resource temporarily unavailable power off backlight ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 NetworkManager: <info> Activation (ra0) starting connection 'Auto midfun' NetworkManager: <info> Activation (ra0) starting connection 'Auto midfun' NetworkManager: <info> (ra0): device state change: 3 -> 4 NetworkManager: <info> (ra0): device state change: 3 -> 4 NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> (ra0): device state change: 4 -> 5 NetworkManager: <info> (ra0): device state change: 4 -> 5 NetworkManager: <info> Activation (ra0/wireless): access point 'Auto midfun' has security, but secrets are required. NetworkManager: <info> Activation (ra0/wireless): access point 'Auto midfun' has security, but secrets are required. NetworkManager: <info> (ra0): device state change: 5 -> 6 NetworkManager: <info> (ra0): device state change: 5 -> 6 NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) complete. NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) complete. (nm-applet:1964): WARNING : <WARN> nm_gconf_get_keyring_items(): key: /system/networking/private-data/229b9125-d1af-40dd-aa4d-8974724d16b0/802-11-wireless-security/psk NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> (ra0): device state change: 6 -> 4 NetworkManager: <info> (ra0): device state change: 6 -> 4 NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> (ra0): device state change: 4 -> 5 NetworkManager: <info> (ra0): device state change: 4 -> 5 NetworkManager: <info> Activation (ra0/wireless): connection 'Auto midfun' has security, and secrets exist. No new secrets needed. NetworkManager: <info> Activation (ra0/wireless): connection 'Auto midfun' has security, and secrets exist. No new secrets needed. NetworkManager: <info> Config: added 'ssid' value 'midfun' NetworkManager: <info> Config: added 'ssid' value 'midfun' NetworkManager: <info> Config: added 'scan_ssid' value '1' NetworkManager: <info> Config: added 'scan_ssid' value '1' NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' NetworkManager: <info> Config: added 'psk' value '<omitted>' NetworkManager: <info> Config: added 'psk' value '<omitted>' NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) complete. NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) complete. NetworkManager: <info> Config: set interface ap_scan to 1 NetworkManager: <info> Config: set interface ap_scan to 1 NetworkManager: <info> (ra0): supplicant connection state: scanning -> disconnected NetworkManager: <info> (ra0): supplicant connection state: scanning -> disconnected NetworkManager: <info> (ra0): supplicant connection state: disconnected -> scanning NetworkManager: <info> (ra0): supplicant connection state: disconnected -> scanning ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 490 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) Trying to associate with 00:1c:b0:91:6e:8c (SSID='midfun' freq=2437 MHz) NetworkManager: <info> (ra0): supplicant connection state: scanning -> associating NetworkManager: <info> (ra0): supplicant connection state: scanning -> associating Associated with 00:1c:b0:91:6e:8c NetworkManager: <info> (ra0): supplicant connection state: associating -> associated NetworkManager: <info> (ra0): supplicant connection state: associating -> associated NetworkManager: <info> (ra0): supplicant connection state: associated -> 4-way handshake NetworkManager: <info> (ra0): supplicant connection state: associated -> 4-way handshake NetworkManager: <info> (ra0): supplicant connection state: 4-way handshake -> group handshake NetworkManager: <info> (ra0): supplicant connection state: 4-way handshake -> group handshake WPA: Key negotiation completed with 00:1c:b0:91:6e:8c [PTK=CCMP GTK=TKIP] CTRL-EVENT-CONNECTED - Connection to 00:1c:b0:91:6e:8c completed (auth) [id=0 id_str=] NetworkManager: <info> (ra0): supplicant connection state: group handshake -> completed NetworkManager: <info> (ra0): supplicant connection state: group handshake -> completed NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'midfun'. NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'midfun'. NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) started... NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) started... NetworkManager: <info> (ra0): device state change: 5 -> 7 NetworkManager: <info> (ra0): device state change: 5 -> 7 NetworkManager: <info> Activation (ra0) Beginning DHCP transaction. NetworkManager: <info> Activation (ra0) Beginning DHCP transaction. NetworkManager: <info> dhclient started with pid 2044 NetworkManager: <info> dhclient started with pid 2044 NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) complete. NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) complete. Internet Systems Consortium DHCP Client V3.0.2 Copyright 2004 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/products/DHCP can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file or directory NetworkManager: <info> DHCP: device ra0 state changed (null) -> preinit NetworkManager: <info> DHCP: device ra0 state changed (null) -> preinit Listening on LPF/ra0/00:03:19:94:00:4c Sending on LPF/ra0/00:03:19:94:00:4c Sending on Socket/fallback DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 7 DHCPOFFER from 192.168.1.2 DHCPREQUEST on ra0 to 255.255.255.255 port 67 DHCPACK from 192.168.1.2 NetworkManager: <info> DHCP: device ra0 state changed preinit -> bound NetworkManager: <info> DHCP: device ra0 state changed preinit -> bound NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP Configure Get) scheduled... NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP Configure Get) scheduled... NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP Configure Get) started... NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP Configure Get) started... NetworkManager: <info> address 192.168.1.114 NetworkManager: <info> address 192.168.1.114 NetworkManager: <info> prefix 24 (255.255.255.0) NetworkManager: <info> prefix 24 (255.255.255.0) NetworkManager: <info> gateway 192.168.1.2 NetworkManager: <info> gateway 192.168.1.2 NetworkManager: <info> nameserver '192.168.1.2' NetworkManager: <info> nameserver '192.168.1.2' NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP Configure Commit) scheduled... NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP Configure Commit) scheduled... NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP Configure Get) complete. NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP Configure Get) complete. can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file or directory bound to 192.168.1.114 -- renewal in 40639 seconds. NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP Configure Commit) started... NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP Configure Commit) started... NetworkManager: <info> (ra0): device state change: 7 -> 8 NetworkManager: <info> (ra0): device state change: 7 -> 8 NetworkManager: <info> Policy set 'Auto midfun' (ra0) as default for routing and DNS. NetworkManager: <info> Policy set 'Auto midfun' (ra0) as default for routing and DNS. NetworkManager: <info> Activation (ra0) successful, device activated. NetworkManager: <info> Activation (ra0) successful, device activated. NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP Configure Commit) complete. NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP Configure Commit) complete. NetworkManager: <info> Trying to start the system settings daemon... NetworkManager: <info> Trying to start the system settings daemon... ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 在2009-11-02 17:33:31，"tommy.hong" <hongjiujing@...> 写道： Platform :arm11 Networkmanager version :networkmanager 0.7.1 Linux kerne:2.6.24.2 USB wifi :rtl3070 Why Networkmanager gets AP need several time? root@localhost:/# /etc/init.d/NetworkManager restart Stopping NetworkManager daemon: NetworkManagersh: you need to specify whom to kill . CTRL-EVENT-TERMINATING - signal 15 received ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 4 value 0x0 - Starting NetworkManager daemon: NetworkManagerdbus_bus_request_name[dbus]: Resource temporarily unavailable Could not request DBus service name: already registered. Failed to initialize wpa_supplicant . root@localhost:/# Terminate the task(RtmpMlmeTask) with pid(2131)! Terminate the task(RtmpCmdQTask) with pid(2132)! Terminate the task(RtmpTimerTask) with pid(2130)! ---> RTMPFreeTxRxRingMemory <--- RTMPFreeTxRxRingMemory Message: NM appeared \ > root@localhost:/# <-- RTMPAllocTxRxRingMemory, Status=0 -->RTUSBVenderReset <--RTUSBVenderReset root@localhost:/# root@localhost:/# root@localhost:/# root@localhost:/# Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) 1. Phy Mode = 9 2. Phy Mode = 9 3. Phy Mode = 9 RTMPSetPhyMode: channel is out of range, use first channel=1 MCS Set = ff 00 00 00 01 RTMPFilterCalibration - can't find a valid value, loopcnt=102 stop calibrating<==== rt28xx_init, Status=0 0x1300 = 00064300 ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable need several minutes to get AP! but : root@localhost:/new3gdriver/image/sbin# ./iwlist ra0 scanning ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 766 ra0 Scan completed : Cell 01 - Address: 00:14:78:CB:E7:06 Protocol:802.11b/g ESSID:"XIZIIUK-NJ" Mode:Managed Channel:6 Quality:13/100 Signal level:-85 dBm Noise level:-115 dBm Encryption key:on Bit Rates:36 Mb/s IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Preauthentication Supported Cell 02 - Address: 00:23:CD:48:D6:6A Protocol:802.11b/g ESSID:"TP-LINK_48D66A" Mode:Managed Channel:6 Quality:7/100 Signal level:-87 dBm Noise level:-115 dBm Encryption key:on Bit Rates:36 Mb/s Cell 03 - Address: 00:1C:B0:91:6E:8C Protocol:802.11g ESSID:"xxxx" Mode:Managed Channel:6 Quality:63/100 Signal level:-65 dBm Noise level:-115 dBm Encryption key:on Bit Rates:11 Mb/s IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Cell 04 - Address: 00:23:CD:E7:F3:9E Protocol:802.11b/g ESSID:"TP-123" Mode:Managed Channel:6 Quality:0/100 Signal level:-91 dBm Noise level:-115 dBm Encryption key:on Bit Rates:36 Mb/s Cell 05 - Address: 02:80:D1:C8:32:12 Protocol:802.11b ESSID:"axel" Mode:Ad-Hoc Channel:11 Quality:7/100 Signal level:-87 dBm Noise level:-115 dBm Encryption key:off Bit Rates:11 Mb/s Cell 06 - Address: 02:1B:77:00:00:C8 Protocol:802.11b/g ESSID:"LocalGroup" Mode:Ad-Hoc Channel:11 Quality:13/100 Signal level:-85 dBm Noise level:-115 dBm Encryption key:off Bit Rates:11 Mb/s can get AP quickly ? I guess it is a driver or H/W issue ? Tommy 09年新晋3D主流网游《天下贰》，网易六年亿资打造 09年新晋3D主流网游《天下贰》，网易六年亿资打造 _______________________________________________ NetworkManager-list mailing list NetworkManager-list@... http://mail.gnome.org/mailman/listinfo/networkmanager-list
	Re:Re:Why Networkmanager gets AP need several time? by tommy.hong :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message root@localhost:/# time NetworkManager --no-daemon NetworkManager: <info> starting... NetworkManager: <info> starting... ifup: interface lo already configured Message: NM appeared NetworkManager: <info> (eth0): driver 'dm9000' does not support carrier detection. You must switch to it manually. NetworkManager: <info> (eth0): driver 'dm9000' does not support carrier detection. You must switch to it manually. NetworkManager: <info> (eth0): new Ethernet device (driver: 'dm9000') NetworkManager: <info> (eth0): new Ethernet device (driver: 'dm9000') NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa NetworkManager: <info> (ra0): driver does not support SSID scans (scan_capa 0x00). NetworkManager: <info> (ra0): driver does not support SSID scans (scan_capa 0x00). NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'usb') NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'usb') NetworkManager: <info> (ra0): exported as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 NetworkManager: <info> (ra0): exported as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3_serial_unknown_3, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3 serial_device: /dev/s3c_serial3, driver: s3c-uart ttyname: s3c_serial3 sysfs_path get udev proped: /sys/devices/platform/s3c-uart.3/tty/s3c_serial3 libudev: 1, gsm: 0, cdma: 0 hal get : gsm: 0, cdma: 0 NetworkManager: <info> (s3c_serial3): ignoring due to lack of mobile broadband capabilties NetworkManager: <info> (s3c_serial3): ignoring due to lack of mobile broadband capabilties udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2_serial_unknown_2, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2 serial_device: /dev/s3c_serial2, driver: s3c-uart ttyname: s3c_serial2 sysfs_path get udev proped: /sys/devices/platform/s3c-uart.2/tty/s3c_serial2 libudev: 1, gsm: 0, cdma: 0 hal get : gsm: 0, cdma: 0 NetworkManager: <info> (s3c_serial2): ignoring due to lack of mobile broadband capabilties NetworkManager: <info> (s3c_serial2): ignoring due to lack of mobile broadband capabilties udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1_serial_unknown_1, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1 serial_device: /dev/s3c_serial1, driver: s3c-uart ttyname: s3c_serial1 sysfs_path get udev proped: /sys/devices/platform/s3c-uart.1/tty/s3c_serial1 libudev: 1, gsm: 0, cdma: 0 hal get : gsm: 0, cdma: 0 NetworkManager: <info> (s3c_serial1): ignoring due to lack of mobile broadband capabilties NetworkManager: <info> (s3c_serial1): ignoring due to lack of mobile broadband capabilties udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0_serial_unknown_0, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0 serial_device: /dev/s3c_serial0, driver: s3c-uart ttyname: s3c_serial0 sysfs_path get udev proped: /sys/devices/platform/s3c-uart.0/tty/s3c_serial0 libudev: 1, gsm: 0, cdma: 0 hal get : gsm: 0, cdma: 0 NetworkManager: <info> (s3c_serial0): ignoring due to lack of mobile broadband capabilties NetworkManager: <info> (s3c_serial0): ignoring due to lack of mobile broadband capabilties NetworkManager: <info> Trying to start the system settings daemon... NetworkManager: <info> Trying to start the system settings daemon... NetworkManager: <info> (eth0): device state change: 1 -> 2 NetworkManager: <info> (eth0): device state change: 1 -> 2 eth0: link down NetworkManager: <info> (eth0): bringing up device. NetworkManager: <info> (eth0): bringing up device. NetworkManager: <info> (eth0): preparing device. NetworkManager: <info> (eth0): preparing device. NetworkManager: <info> (eth0): deactivating device (reason: 2). NetworkManager: <info> (eth0): deactivating device (reason: 2). NetworkManager: <info> (ra0): device state change: 1 -> 2 NetworkManager: <info> (ra0): device state change: 1 -> 2 NetworkManager: <info> (ra0): bringing up device. NetworkManager: <info> (ra0): bringing up device. eth0: link up, 10Mbps, half-duplex, lpa 0x0021 <-- RTMPAllocTxRxRingMemory, Status=0 -->RTUSBVenderReset <--RTUSBVenderReset Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) 1. Phy Mode = 9 2. Phy Mode = 9 3. Phy Mode = 9 RTMPSetPhyMode: channel is out of range, use first channel=1 MCS Set = ff 00 00 00 01 <==== rt28xx_init, Status=0 0x1300 = 00064300 NetworkManager: <info> (ra0): preparing device. NetworkManager: <info> (ra0): preparing device. NetworkManager: <info> (ra0): deactivating device (reason: 2). NetworkManager: <info> (ra0): deactivating device (reason: 2). NetworkManager: <info> (eth0): device state change: 2 -> 3 NetworkManager: <info> (eth0): device state change: 2 -> 3 NetworkManager: <info> (ra0): device state change: 2 -> 3 NetworkManager: <info> (ra0): device state change: 2 -> 3 ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 4 value 0x0 - NetworkManager: <info> (ra0): supplicant interface state: starting -> ready NetworkManager: <info> (ra0): supplicant interface state: starting -> ready ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable power off backlight ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 NetworkManager: <info> Activation (ra0) starting connection 'Auto midfun' NetworkManager: <info> Activation (ra0) starting connection 'Auto midfun' NetworkManager: <info> (ra0): device state change: 3 -> 4 NetworkManager: <info> (ra0): device state change: 3 -> 4 NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> (ra0): device state change: 4 -> 5 NetworkManager: <info> (ra0): device state change: 4 -> 5 NetworkManager: <info> Activation (ra0/wireless): access point 'Auto midfun' has security, but secrets are required. NetworkManager: <info> Activation (ra0/wireless): access point 'Auto midfun' has security, but secrets are required. NetworkManager: <info> (ra0): device state change: 5 -> 6 NetworkManager: <info> (ra0): device state change: 5 -> 6 NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) complete. NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) complete. (nm-applet:1964): WARNING : <WARN> nm_gconf_get_keyring_items(): key: /system/networking/private-data/229b9125-d1af-40dd-aa4d-8974724d16b0/802-11-wireless-security/psk NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> (ra0): device state change: 6 -> 4 NetworkManager: <info> (ra0): device state change: 6 -> 4 NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> (ra0): device state change: 4 -> 5 NetworkManager: <info> (ra0): device state change: 4 -> 5 NetworkManager: <info> Activation (ra0/wireless): connection 'Auto midfun' has security, and secrets exist. No new secrets needed. NetworkManager: <info> Activation (ra0/wireless): connection 'Auto midfun' has security, and secrets exist. No new secrets needed. NetworkManager: <info> Config: added 'ssid' value 'midfun' NetworkManager: <info> Config: added 'ssid' value 'midfun' NetworkManager: <info> Config: added 'scan_ssid' value '1' NetworkManager: <info> Config: added 'scan_ssid' value '1' NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' NetworkManager: <info> Config: added 'psk' value '<omitted>' NetworkManager: <info> Config: added 'psk' value '<omitted>' NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) complete. NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) complete. NetworkManager: <info> Config: set interface ap_scan to 1 NetworkManager: <info> Config: set interface ap_scan to 1 NetworkManager: <info> (ra0): supplicant connection state: scanning -> disconnected NetworkManager: <info> (ra0): supplicant connection state: scanning -> disconnected NetworkManager: <info> (ra0): supplicant connection state: disconnected -> scanning NetworkManager: <info> (ra0): supplicant connection state: disconnected -> scanning ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) Trying to associate with 00:1c:b0:91:6e:8c (SSID='midfun' freq=2437 MHz) NetworkManager: <info> (ra0): supplicant connection state: scanning -> associating NetworkManager: <info> (ra0): supplicant connection state: scanning -> associating Associated with 00:1c:b0:91:6e:8c NetworkManager: <info> (ra0): supplicant connection state: associating -> associated NetworkManager: <info> (ra0): supplicant connection state: associating -> associated NetworkManager: <info> (ra0): supplicant connection state: associated -> 4-way handshake NetworkManager: <info> (ra0): supplicant connection state: associated -> 4-way handshake NetworkManager: <info> (ra0): supplicant connection state: 4-way handshake -> group handshake NetworkManager: <info> (ra0): supplicant connection state: 4-way handshake -> group handshake WPA: Key negotiation completed with 00:1c:b0:91:6e:8c [PTK=CCMP GTK=TKIP] CTRL-EVENT-CONNECTED - Connection to 00:1c:b0:91:6e:8c completed (auth) [id=0 id_str=] NetworkManager: <info> (ra0): supplicant connection state: group handshake -> completed NetworkManager: <info> (ra0): supplicant connection state: group handshake -> completed NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'midfun'. NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'midfun'. NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) started... NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) started... NetworkManager: <info> (ra0): device state change: 5 -> 7 NetworkManager: <info> (ra0): device state change: 5 -> 7 NetworkManager: <info> Activation (ra0) Beginning DHCP transaction. NetworkManager: <info> Activation (ra0) Beginning DHCP transaction. Internet Systems Consortium DHCP Client V3.0.2 Copyright 2004 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/products/DHCP NetworkManager: <info> dhclient started with pid 2106 NetworkManager: <info> dhclient started with pid 2106 NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) complete. NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) complete. can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file or directory NetworkManager: <info> DHCP: device ra0 state changed (null) -> preinit NetworkManager: <info> DHCP: device ra0 state changed (null) -> preinit Listening on LPF/ra0/00:03:19:94:00:4c Sending on LPF/ra0/00:03:19:94:00:4c Sending on Socket/fallback NetworkManager: <WARN> nm_signal_handler(): Caught signal 2, shutting down normally. NetworkManager: <WARN> nm_signal_handler(): Caught signal 2, shutting down normally. NetworkManager: <info> (eth0): now unmanaged NetworkManager: <info> (eth0): now unmanaged NetworkManager: <info> (eth0): device state change: 3 -> 1 NetworkManager: <info> (eth0): device state change: 3 -> 1 NetworkManager: <info> (eth0): cleaning up... NetworkManager: <info> (eth0): cleaning up... NetworkManager: <info> (eth0): taking down device. NetworkManager: <info> (eth0): taking down device. NetworkManager: <info> (ra0): now unmanaged NetworkManager: <info> (ra0): now unmanaged NetworkManager: <info> (ra0): device state change: 7 -> 1 NetworkManager: <info> (ra0): device state change: 7 -> 1 NetworkManager: <info> (ra0): deactivating device (reason: 36). NetworkManager: <info> (ra0): deactivating device (reason: 36). NetworkManager: <info> ra0: canceled DHCP transaction, dhcp client pid 2106 NetworkManager: <info> ra0: canceled DHCP transaction, dhcp client pid 2106 CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys NetworkManager: <info> (ra0): cleaning up... NetworkManager: <info> (ra0): cleaning up... NetworkManager: <info> (ra0): taking down device. NetworkManager: <info> (ra0): taking down device. CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys Terminate the task(RtmpMlmeTask) with pid(2104)! Terminate the task(RtmpCmdQTask) with pid(2105)! Terminate the task(RtmpTimerTask) with pid(2103)! ---> RTMPFreeTxRxRingMemory <--- RTMPFreeTxRxRingMemory ioctl[SIOCSIWENCODEEXT]: Network is down ioctl[SIOCSIWENCODEEXT]: Network is down ioctl[SIOCSIWENCODEEXT]: Network is down ioctl[SIOCSIWENCODEEXT]: Network is down ioctl[SIOCSIWENCODEEXT]: Network is down CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys ioctl[SIOCSIWENCODEEXT]: Network is down ioctl[SIOCSIWENCODEEXT]: Network is down ioctl[SIOCSIWENCODEEXT]: Network is down ioctl[SIOCSIWENCODEEXT]: Network is down ioctl[SIOCSIWENCODEEXT]: Network is down CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys ioctl[SIOCSIWENCODEEXT]: Network is down ioctl[SIOCSIWENCODEEXT]: Network is down ioctl[SIOCSIWENCODEEXT]: Network is down ioctl[SIOCSIWENCODEEXT]: Network is down ioctl[SIOCSIWENCODEEXT]: Network is down l2_packet_receive - recvfrom: Network is down ioctl[SIOCSIWAUTH]: Network is down WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver. ioctl[SIOCSIWAUTH]: Network is down WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Network is down WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAP]: Network is down NetworkManager: <info> exiting (success) NetworkManager: <info> exiting (success) (nm-applet:1964): WARNING : _nm_object_get_property: Error getting 'ActiveAccessPoint' for /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0: Message did not receive a reply (timeout by message bus) real 1m 59.86s user 0m 0.48s sys 0m 0.21s root@localhost:/# Message: NM disappeared 在2009-11-02 18:23:50，"tommy.hong" <hongjiujing@...> 写道： root@localhost:/# NetworkManager --no-daemon NetworkManager: <info> starting... NetworkManager: <info> starting... ifup: interface lo already configured NetworkManager: <info> (eth0): driver 'dm9000' does not support carrier detection. You must switch to it manually. NetworkManager: <info> (eth0): driver 'dm9000' does not support carrier detection. You must switch to it manually. NetworkManager: <info> (eth0): new Ethernet device (driver: 'dm9000') NetworkManager: <info> (eth0): new Ethernet device (driver: 'dm9000') NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa NetworkManager: <info> (ra0): driver does not support SSID scans (scan_capa 0x00). NetworkManager: <info> (ra0): driver does not support SSID scans (scan_capa 0x00). NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'usb') NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'usb') NetworkManager: <info> (ra0): exported as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 NetworkManager: <info> (ra0): exported as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3_serial_unknown_3, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3 serial_device: /dev/s3c_serial3, driver: s3c-uart ttyname: s3c_serial3 sysfs_path get udev proped: /sys/devices/platform/s3c-uart.3/tty/s3c_serial3 libudev: 1, gsm: 0, cdma: 0 hal get : gsm: 0, cdma: 0 NetworkManager: <info> (s3c_serial3): ignoring due to lack of mobile broadband capabilties NetworkManager: <info> (s3c_serial3): ignoring due to lack of mobile broadband capabilties udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2_serial_unknown_2, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2 serial_device: /dev/s3c_serial2, driver: s3c-uart ttyname: s3c_serial2 sysfs_path get udev proped: /sys/devices/platform/s3c-uart.2/tty/s3c_serial2 libudev: 1, gsm: 0, cdma: 0 hal get : gsm: 0, cdma: 0 NetworkManager: <info> (s3c_serial2): ignoring due to lack of mobile broadband capabilties NetworkManager: <info> (s3c_serial2): ignoring due to lack of mobile broadband capabilties udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1_serial_unknown_1, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1 serial_device: /dev/s3c_serial1, driver: s3c-uart ttyname: s3c_serial1 sysfs_path get udev proped: /sys/devices/platform/s3c-uart.1/tty/s3c_serial1 libudev: 1, gsm: 0, cdma: 0 hal get : gsm: 0, cdma: 0 NetworkManager: <info> (s3c_serial1): ignoring due to lack of mobile broadband capabilties NetworkManager: <info> (s3c_serial1): ignoring due to lack of mobile broadband capabilties udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0_serial_unknown_0, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0 serial_device: /dev/s3c_serial0, driver: s3c-uart ttyname: s3c_serial0 sysfs_path get udev proped: /sys/devices/platform/s3c-uart.0/tty/s3c_serial0 libudev: 1, gsm: 0, cdma: 0 hal get : gsm: 0, cdma: 0 NetworkManager: <info> (s3c_serial0): ignoring due to lack of mobile broadband capabilties NetworkManager: <info> (s3c_serial0): ignoring due to lack of mobile broadband capabilties NetworkManager: <info> Trying to start the system settings daemon... NetworkManager: <info> Trying to start the system settings daemon... Message: NM appeared NetworkManager: <info> (eth0): device state change: 1 -> 2 NetworkManager: <info> (eth0): device state change: 1 -> 2 NetworkManager: <info> (eth0): preparing device. NetworkManager: <info> (eth0): preparing device. NetworkManager: <info> (eth0): deactivating device (reason: 2). NetworkManager: <info> (eth0): deactivating device (reason: 2). NetworkManager: <info> (eth0): device state change: 2 -> 3 NetworkManager: <info> (eth0): device state change: 2 -> 3 NetworkManager: <info> (ra0): device state change: 1 -> 2 NetworkManager: <info> (ra0): device state change: 1 -> 2 NetworkManager: <info> (ra0): bringing up device. NetworkManager: <info> (ra0): bringing up device. <-- RTMPAllocTxRxRingMemory, Status=0 -->RTUSBVenderReset <--RTUSBVenderReset Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) 1. Phy Mode = 9 2. Phy Mode = 9 3. Phy Mode = 9 RTMPSetPhyMode: channel is out of range, use first channel=1 MCS Set = ff 00 00 00 01 <==== rt28xx_init, Status=0 0x1300 = 00064300 NetworkManager: <info> (ra0): preparing device. NetworkManager: <info> (ra0): preparing device. NetworkManager: <info> (ra0): deactivating device (reason: 2). NetworkManager: <info> (ra0): deactivating device (reason: 2). NetworkManager: <info> (ra0): device state change: 2 -> 3 NetworkManager: <info> (ra0): device state change: 2 -> 3 ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 4 value 0x0 - NetworkManager: <info> (ra0): supplicant interface state: starting -> ready NetworkManager: <info> (ra0): supplicant interface state: starting -> ready ioctl[SIOCGIWSCAN]: Resource temporarily unavailable power off backlight ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 NetworkManager: <info> Activation (ra0) starting connection 'Auto midfun' NetworkManager: <info> Activation (ra0) starting connection 'Auto midfun' NetworkManager: <info> (ra0): device state change: 3 -> 4 NetworkManager: <info> (ra0): device state change: 3 -> 4 NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> (ra0): device state change: 4 -> 5 NetworkManager: <info> (ra0): device state change: 4 -> 5 NetworkManager: <info> Activation (ra0/wireless): access point 'Auto midfun' has security, but secrets are required. NetworkManager: <info> Activation (ra0/wireless): access point 'Auto midfun' has security, but secrets are required. NetworkManager: <info> (ra0): device state change: 5 -> 6 NetworkManager: <info> (ra0): device state change: 5 -> 6 NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) complete. NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) complete. (nm-applet:1964): WARNING : <WARN> nm_gconf_get_keyring_items(): key: /system/networking/private-data/229b9125-d1af-40dd-aa4d-8974724d16b0/802-11-wireless-security/psk NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> (ra0): device state change: 6 -> 4 NetworkManager: <info> (ra0): device state change: 6 -> 4 NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> (ra0): device state change: 4 -> 5 NetworkManager: <info> (ra0): device state change: 4 -> 5 NetworkManager: <info> Activation (ra0/wireless): connection 'Auto midfun' has security, and secrets exist. No new secrets needed. NetworkManager: <info> Activation (ra0/wireless): connection 'Auto midfun' has security, and secrets exist. No new secrets needed. NetworkManager: <info> Config: added 'ssid' value 'midfun' NetworkManager: <info> Config: added 'ssid' value 'midfun' NetworkManager: <info> Config: added 'scan_ssid' value '1' NetworkManager: <info> Config: added 'scan_ssid' value '1' NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' NetworkManager: <info> Config: added 'psk' value '<omitted>' NetworkManager: <info> Config: added 'psk' value '<omitted>' NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) complete. NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device Configure) complete. NetworkManager: <info> Config: set interface ap_scan to 1 NetworkManager: <info> Config: set interface ap_scan to 1 NetworkManager: <info> (ra0): supplicant connection state: scanning -> disconnected NetworkManager: <info> (ra0): supplicant connection state: scanning -> disconnected NetworkManager: <info> (ra0): supplicant connection state: disconnected -> scanning NetworkManager: <info> (ra0): supplicant connection state: disconnected -> scanning ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 490 ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) Trying to associate with 00:1c:b0:91:6e:8c (SSID='midfun' freq=2437 MHz) NetworkManager: <info> (ra0): supplicant connection state: scanning -> associating NetworkManager: <info> (ra0): supplicant connection state: scanning -> associating Associated with 00:1c:b0:91:6e:8c NetworkManager: <info> (ra0): supplicant connection state: associating -> associated NetworkManager: <info> (ra0): supplicant connection state: associating -> associated NetworkManager: <info> (ra0): supplicant connection state: associated -> 4-way handshake NetworkManager: <info> (ra0): supplicant connection state: associated -> 4-way handshake NetworkManager: <info> (ra0): supplicant connection state: 4-way handshake -> group handshake NetworkManager: <info> (ra0): supplicant connection state: 4-way handshake -> group handshake WPA: Key negotiation completed with 00:1c:b0:91:6e:8c [PTK=CCMP GTK=TKIP] CTRL-EVENT-CONNECTED - Connection to 00:1c:b0:91:6e:8c completed (auth) [id=0 id_str=] NetworkManager: <info> (ra0): supplicant connection state: group handshake -> completed NetworkManager: <info> (ra0): supplicant connection state: group handshake -> completed NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'midfun'. NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'midfun'. NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) started... NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) started... NetworkManager: <info> (ra0): device state change: 5 -> 7 NetworkManager: <info> (ra0): device state change: 5 -> 7 NetworkManager: <info> Activation (ra0) Beginning DHCP transaction. NetworkManager: <info> Activation (ra0) Beginning DHCP transaction. NetworkManager: <info> dhclient started with pid 2044 NetworkManager: <info> dhclient started with pid 2044 NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) complete. NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure Start) complete. Internet Systems Consortium DHCP Client V3.0.2 Copyright 2004 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/products/DHCP can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file or directory NetworkManager: <info> DHCP: device ra0 state changed (null) -> preinit NetworkManager: <info> DHCP: device ra0 state changed (null) -> preinit Listening on LPF/ra0/00:03:19:94:00:4c Sending on LPF/ra0/00:03:19:94:00:4c Sending on Socket/fallback DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 7 DHCPOFFER from 192.168.1.2 DHCPREQUEST on ra0 to 255.255.255.255 port 67 DHCPACK from 192.168.1.2 NetworkManager: <info> DHCP: device ra0 state changed preinit -> bound NetworkManager: <info> DHCP: device ra0 state changed preinit -> bound NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP Configure Get) scheduled... NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP Configure Get) scheduled... NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP Configure Get) started... NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP Configure Get) started... NetworkManager: <info> address 192.168.1.114 NetworkManager: <info> address 192.168.1.114 NetworkManager: <info> prefix 24 (255.255.255.0) NetworkManager: <info> prefix 24 (255.255.255.0) NetworkManager: <info> gateway 192.168.1.2 NetworkManager: <info> gateway 192.168.1.2 NetworkManager: <info> nameserver '192.168.1.2' NetworkManager: <info> nameserver '192.168.1.2' NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP Configure Commit) scheduled... NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP Configure Commit) scheduled... NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP Configure Get) complete. NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP Configure Get) complete. can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file or directory bound to 192.168.1.114 -- renewal in 40639 seconds. NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP Configure Commit) started... NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP Configure Commit) started... NetworkManager: <info> (ra0): device state change: 7 -> 8 NetworkManager: <info> (ra0): device state change: 7 -> 8 NetworkManager: <info> Policy set 'Auto midfun' (ra0) as default for routing and DNS. NetworkManager: <info> Policy set 'Auto midfun' (ra0) as default for routing and DNS. NetworkManager: <info> Activation (ra0) successful, device activated. NetworkManager: <info> Activation (ra0) successful, device activated. NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP Configure Commit) complete. NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP Configure Commit) complete. NetworkManager: <info> Trying to start the system settings daemon... NetworkManager: <info> Trying to start the system settings daemon... ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 在2009-11-02 17:33:31，"tommy.hong" <hongjiujing@...> 写道： Platform :arm11 Networkmanager version :networkmanager 0.7.1 Linux kerne:2.6.24.2 USB wifi :rtl3070 Why Networkmanager gets AP need several time? root@localhost:/# /etc/init.d/NetworkManager restart Stopping NetworkManager daemon: NetworkManagersh: you need to specify whom to kill . CTRL-EVENT-TERMINATING - signal 15 received ioctl[SIOCSIWAUTH]: Operation not supported WEXT auth param 4 value 0x0 - Starting NetworkManager daemon: NetworkManagerdbus_bus_request_name[dbus]: Resource temporarily unavailable Could not request DBus service name: already registered. Failed to initialize wpa_supplicant . root@localhost:/# Terminate the task(RtmpMlmeTask) with pid(2131)! Terminate the task(RtmpCmdQTask) with pid(2132)! Terminate the task(RtmpTimerTask) with pid(2130)! ---> RTMPFreeTxRxRingMemory <--- RTMPFreeTxRxRingMemory Message: NM appeared \ > root@localhost:/# <-- RTMPAllocTxRxRingMemory, Status=0 -->RTUSBVenderReset <--RTUSBVenderReset root@localhost:/# root@localhost:/# root@localhost:/# root@localhost:/# Key1Str is Invalid key length(0) or Type(0) Key2Str is Invalid key length(0) or Type(0) Key3Str is Invalid key length(0) or Type(0) Key4Str is Invalid key length(0) or Type(0) 1. Phy Mode = 9 2. Phy Mode = 9 3. Phy Mode = 9 RTMPSetPhyMode: channel is out of range, use first channel=1 MCS Set = ff 00 00 00 01 RTMPFilterCalibration - can't find a valid value, loopcnt=102 stop calibrating<==== rt28xx_init, Status=0 0x1300 = 00064300 ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable ioctl[SIOCGIWSCAN]: Resource temporarily unavailable need several minutes to get AP! but : root@localhost:/new3gdriver/image/sbin# ./iwlist ra0 scanning ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 766 ra0 Scan completed : Cell 01 - Address: 00:14:78:CB:E7:06 Protocol:802.11b/g ESSID:"XIZIIUK-NJ" Mode:Managed Channel:6 Quality:13/100 Signal level:-85 dBm Noise level:-115 dBm Encryption key:on Bit Rates:36 Mb/s IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Preauthentication Supported Cell 02 - Address: 00:23:CD:48:D6:6A Protocol:802.11b/g ESSID:"TP-LINK_48D66A" Mode:Managed Channel:6 Quality:7/100 Signal level:-87 dBm Noise level:-115 dBm Encryption key:on Bit Rates:36 Mb/s Cell 03 - Address: 00:1C:B0:91:6E:8C Protocol:802.11g ESSID:"xxxx" Mode:Managed Channel:6 Quality:63/100 Signal level:-65 dBm Noise level:-115 dBm Encryption key:on Bit Rates:11 Mb/s IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : PSK Cell 04 - Address: 00:23:CD:E7:F3:9E Protocol:802.11b/g ESSID:"TP-123" Mode:Managed Channel:6 Quality:0/100 Signal level:-91 dBm Noise level:-115 dBm Encryption key:on Bit Rates:36 Mb/s Cell 05 - Address: 02:80:D1:C8:32:12 Protocol:802.11b ESSID:"axel" Mode:Ad-Hoc Channel:11 Quality:7/100 Signal level:-87 dBm Noise level:-115 dBm Encryption key:off Bit Rates:11 Mb/s Cell 06 - Address: 02:1B:77:00:00:C8 Protocol:802.11b/g ESSID:"LocalGroup" Mode:Ad-Hoc Channel:11 Quality:13/100 Signal level:-85 dBm Noise level:-115 dBm Encryption key:off Bit Rates:11 Mb/s can get AP quickly ? I guess it is a driver or H/W issue ? Tommy 09年新晋3D主流网游《天下贰》，网易六年亿资打造 09年新晋3D主流网游《天下贰》，网易六年亿资打造 "雪见"杨幂邀你共品3D国韵网游《天下贰》，海报免费领 _______________________________________________ NetworkManager-list mailing list NetworkManager-list@... http://mail.gnome.org/mailman/listinfo/networkmanager-list
	Re: Re:Re:Why Networkmanager gets AP need several time? by Dan Williams :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message On Mon, 2009-11-02 at 18:27 +0800, tommy.hong wrote: > > root@localhost:/# time NetworkManager --no-daemon > NetworkManager: <info> starting... > NetworkManager: <info> starting... It looks like two copies of NM are getting started there. Not sure where that's coming from, but it's wrong. NM itself doesn't do that; maybe 'time' does somehow? Dan > ifup: interface lo already configured > Message: NM appeared > NetworkManager: <info> (eth0): driver 'dm9000' does not support > carrier detection. > You must switch to it manually. > NetworkManager: <info> (eth0): driver 'dm9000' does not support > carrier detection. > You must switch to it manually. > > NetworkManager: <info> (eth0): new Ethernet device (driver: 'dm9000') > NetworkManager: <info> (eth0): new Ethernet device (driver: 'dm9000') > > NetworkManager: <info> (eth0): exported > as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa > NetworkManager: <info> (eth0): exported > as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa > > NetworkManager: <info> (ra0): driver does not support SSID scans > (scan_capa 0x00). > NetworkManager: <info> (ra0): driver does not support SSID scans > (scan_capa 0x00). > > NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'usb') > NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'usb') > > NetworkManager: <info> (ra0): exported > as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 > NetworkManager: <info> (ra0): exported > as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 > > udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3_serial_unknown_3, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3 > serial_device: /dev/s3c_serial3, driver: s3c-uart > ttyname: s3c_serial3 > sysfs_path get udev > proped: /sys/devices/platform/s3c-uart.3/tty/s3c_serial3 > libudev: 1, gsm: 0, cdma: 0 > hal get : gsm: 0, cdma: 0 > NetworkManager: <info> (s3c_serial3): ignoring due to lack of mobile > broadband capabilties > NetworkManager: <info> (s3c_serial3): ignoring due to lack of mobile > broadband capabilties > > udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2_serial_unknown_2, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2 > serial_device: /dev/s3c_serial2, driver: s3c-uart > ttyname: s3c_serial2 > sysfs_path get udev > proped: /sys/devices/platform/s3c-uart.2/tty/s3c_serial2 > libudev: 1, gsm: 0, cdma: 0 > hal get : gsm: 0, cdma: 0 > NetworkManager: <info> (s3c_serial2): ignoring due to lack of mobile > broadband capabilties > NetworkManager: <info> (s3c_serial2): ignoring due to lack of mobile > broadband capabilties > > udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1_serial_unknown_1, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1 > serial_device: /dev/s3c_serial1, driver: s3c-uart > ttyname: s3c_serial1 > sysfs_path get udev > proped: /sys/devices/platform/s3c-uart.1/tty/s3c_serial1 > libudev: 1, gsm: 0, cdma: 0 > hal get : gsm: 0, cdma: 0 > NetworkManager: <info> (s3c_serial1): ignoring due to lack of mobile > broadband capabilties > NetworkManager: <info> (s3c_serial1): ignoring due to lack of mobile > broadband capabilties > > udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0_serial_unknown_0, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0 > serial_device: /dev/s3c_serial0, driver: s3c-uart > ttyname: s3c_serial0 > sysfs_path get udev > proped: /sys/devices/platform/s3c-uart.0/tty/s3c_serial0 > libudev: 1, gsm: 0, cdma: 0 > hal get : gsm: 0, cdma: 0 > NetworkManager: <info> (s3c_serial0): ignoring due to lack of mobile > broadband capabilties > NetworkManager: <info> (s3c_serial0): ignoring due to lack of mobile > broadband capabilties > > NetworkManager: <info> Trying to start the system settings daemon... > NetworkManager: <info> Trying to start the system settings daemon... > > NetworkManager: <info> (eth0): device state change: 1 -> 2 > NetworkManager: <info> (eth0): device state change: 1 -> 2 > eth0: link down > > NetworkManager: <info> (eth0): bringing up device. > NetworkManager: <info> (eth0): bringing up device. > > NetworkManager: <info> (eth0): preparing device. > NetworkManager: <info> (eth0): preparing device. > > NetworkManager: <info> (eth0): deactivating device (reason: 2). > NetworkManager: <info> (eth0): deactivating device (reason: 2). > > NetworkManager: <info> (ra0): device state change: 1 -> 2 > NetworkManager: <info> (ra0): device state change: 1 -> 2 > > NetworkManager: <info> (ra0): bringing up device. > NetworkManager: <info> (ra0): bringing up device. > > eth0: link up, 10Mbps, half-duplex, lpa 0x0021 > <-- RTMPAllocTxRxRingMemory, Status=0 > -->RTUSBVenderReset > <--RTUSBVenderReset > Key1Str is Invalid key length(0) or Type(0) > Key2Str is Invalid key length(0) or Type(0) > Key3Str is Invalid key length(0) or Type(0) > Key4Str is Invalid key length(0) or Type(0) > 1. Phy Mode = 9 > 2. Phy Mode = 9 > 3. Phy Mode = 9 > RTMPSetPhyMode: channel is out of range, use first channel=1 > MCS Set = ff 00 00 00 01 > <==== rt28xx_init, Status=0 > 0x1300 = 00064300 > NetworkManager: <info> (ra0): preparing device. > NetworkManager: <info> (ra0): preparing device. > > NetworkManager: <info> (ra0): deactivating device (reason: 2). > NetworkManager: <info> (ra0): deactivating device (reason: 2). > > NetworkManager: <info> (eth0): device state change: 2 -> 3 > NetworkManager: <info> (eth0): device state change: 2 -> 3 > > NetworkManager: <info> (ra0): device state change: 2 -> 3 > NetworkManager: <info> (ra0): device state change: 2 -> 3 > > ioctl[SIOCSIWAUTH]: Operation not supported > WEXT auth param 4 value 0x0 - NetworkManager: <info> (ra0): > supplicant interface state: starting -> ready > NetworkManager: <info> (ra0): supplicant interface state: starting > -> ready > > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > power off backlight > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 > NetworkManager: <info> Activation (ra0) starting connection 'Auto > midfun' > NetworkManager: <info> Activation (ra0) starting connection 'Auto > midfun' > > NetworkManager: <info> (ra0): device state change: 3 -> 4 > NetworkManager: <info> (ra0): device state change: 3 -> 4 > > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) > scheduled... > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) > scheduled... > > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) > started... > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) > started... > > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) scheduled... > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) scheduled... > > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) > complete. > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) > complete. > > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) starting... > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) starting... > > NetworkManager: <info> (ra0): device state change: 4 -> 5 > NetworkManager: <info> (ra0): device state change: 4 -> 5 > > NetworkManager: <info> Activation (ra0/wireless): access point 'Auto > midfun' has security, but secrets are required. > NetworkManager: <info> Activation (ra0/wireless): access point 'Auto > midfun' has security, but secrets are required. > > NetworkManager: <info> (ra0): device state change: 5 -> 6 > NetworkManager: <info> (ra0): device state change: 5 -> 6 > > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) complete. > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) complete. > > > (nm-applet:1964): WARNING : <WARN> nm_gconf_get_keyring_items(): > key: /system/networking/private-data/229b9125-d1af-40dd-aa4d-8974724d16b0/802-11-wireless-security/psk > > > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) > scheduled... > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) > scheduled... > > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) > started... > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) > started... > > NetworkManager: <info> (ra0): device state change: 6 -> 4 > NetworkManager: <info> (ra0): device state change: 6 -> 4 > > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) scheduled... > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) scheduled... > > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) > complete. > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) > complete. > > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) starting... > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) starting... > > NetworkManager: <info> (ra0): device state change: 4 -> 5 > NetworkManager: <info> (ra0): device state change: 4 -> 5 > > NetworkManager: <info> Activation (ra0/wireless): connection 'Auto > midfun' has security, and secrets exist. No new secrets needed. > NetworkManager: <info> Activation (ra0/wireless): connection 'Auto > midfun' has security, and secrets exist. No new secrets needed. > > NetworkManager: <info> Config: added 'ssid' value 'midfun' > NetworkManager: <info> Config: added 'ssid' value 'midfun' > > NetworkManager: <info> Config: added 'scan_ssid' value '1' > NetworkManager: <info> Config: added 'scan_ssid' value '1' > > NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' > NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' > > NetworkManager: <info> Config: added 'psk' value '<omitted>' > NetworkManager: <info> Config: added 'psk' value '<omitted>' > > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) complete. > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) complete. > > NetworkManager: <info> Config: set interface ap_scan to 1 > NetworkManager: <info> Config: set interface ap_scan to 1 > > NetworkManager: <info> (ra0): supplicant connection state: scanning > -> disconnected > NetworkManager: <info> (ra0): supplicant connection state: scanning > -> disconnected > > NetworkManager: <info> (ra0): supplicant connection state: > disconnected -> scanning > NetworkManager: <info> (ra0): supplicant connection state: > disconnected -> scanning > > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 > ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) > Trying to associate with 00:1c:b0:91:6e:8c (SSID='midfun' freq=2437 > MHz) > NetworkManager: <info> (ra0): supplicant connection state: scanning > -> associating > NetworkManager: <info> (ra0): supplicant connection state: scanning > -> associating > > Associated with 00:1c:b0:91:6e:8c > NetworkManager: <info> (ra0): supplicant connection state: > associating -> associated > NetworkManager: <info> (ra0): supplicant connection state: > associating -> associated > > NetworkManager: <info> (ra0): supplicant connection state: > associated -> 4-way handshake > NetworkManager: <info> (ra0): supplicant connection state: > associated -> 4-way handshake > > NetworkManager: <info> (ra0): supplicant connection state: 4-way > handshake -> group handshake > NetworkManager: <info> (ra0): supplicant connection state: 4-way > handshake -> group handshake > > WPA: Key negotiation completed with 00:1c:b0:91:6e:8c [PTK=CCMP > GTK=TKIP] > CTRL-EVENT-CONNECTED - Connection to 00:1c:b0:91:6e:8c completed > (auth) [id=0 id_str=] > NetworkManager: <info> (ra0): supplicant connection state: group > handshake -> completed > NetworkManager: <info> (ra0): supplicant connection state: group > handshake -> completed > > NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 (Device > Configure) successful. Connected to wireless network 'midfun'. > NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 (Device > Configure) successful. Connected to wireless network 'midfun'. > > NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure > Start) scheduled. > NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure > Start) scheduled. > > NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure > Start) started... > NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure > Start) started... > > NetworkManager: <info> (ra0): device state change: 5 -> 7 > NetworkManager: <info> (ra0): device state change: 5 -> 7 > > NetworkManager: <info> Activation (ra0) Beginning DHCP transaction. > NetworkManager: <info> Activation (ra0) Beginning DHCP transaction. > > Internet Systems Consortium DHCP Client V3.0.2 > Copyright 2004 Internet Systems Consortium. > All rights reserved. > For info, please visit http://www.isc.org/products/DHCP > > NetworkManager: <info> dhclient started with pid 2106 > NetworkManager: <info> dhclient started with pid 2106 > > NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure > Start) complete. > NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure > Start) complete. > > can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file or > directory > NetworkManager: <info> DHCP: device ra0 state changed (null) -> > preinit > NetworkManager: <info> DHCP: device ra0 state changed (null) -> > preinit > > Listening on LPF/ra0/00:03:19:94:00:4c > Sending on LPF/ra0/00:03:19:94:00:4c > Sending on Socket/fallback > > > NetworkManager: <WARN> nm_signal_handler(): Caught signal 2, shutting > down normally. > NetworkManager: <WARN> nm_signal_handler(): Caught signal 2, shutting > down normally. > > NetworkManager: <info> (eth0): now unmanaged > NetworkManager: <info> (eth0): now unmanaged > > NetworkManager: <info> (eth0): device state change: 3 -> 1 > NetworkManager: <info> (eth0): device state change: 3 -> 1 > > NetworkManager: <info> (eth0): cleaning up... > NetworkManager: <info> (eth0): cleaning up... > > NetworkManager: <info> (eth0): taking down device. > NetworkManager: <info> (eth0): taking down device. > > NetworkManager: <info> (ra0): now unmanaged > NetworkManager: <info> (ra0): now unmanaged > > NetworkManager: <info> (ra0): device state change: 7 -> 1 > NetworkManager: <info> (ra0): device state change: 7 -> 1 > > NetworkManager: <info> (ra0): deactivating device (reason: 36). > NetworkManager: <info> (ra0): deactivating device (reason: 36). > > NetworkManager: <info> ra0: canceled DHCP transaction, dhcp client > pid 2106 > NetworkManager: <info> ra0: canceled DHCP transaction, dhcp client > pid 2106 > > CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys > CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys > NetworkManager: <info> (ra0): cleaning up... > NetworkManager: <info> (ra0): cleaning up... > > NetworkManager: <info> (ra0): taking down device. > NetworkManager: <info> (ra0): taking down device. > > CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys > Terminate the task(RtmpMlmeTask) with pid(2104)! > Terminate the task(RtmpCmdQTask) with pid(2105)! > Terminate the task(RtmpTimerTask) with pid(2103)! > ---> RTMPFreeTxRxRingMemory > <--- RTMPFreeTxRxRingMemory > ioctl[SIOCSIWENCODEEXT]: Network is down > ioctl[SIOCSIWENCODEEXT]: Network is down > ioctl[SIOCSIWENCODEEXT]: Network is down > ioctl[SIOCSIWENCODEEXT]: Network is down > ioctl[SIOCSIWENCODEEXT]: Network is down > CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys > ioctl[SIOCSIWENCODEEXT]: Network is down > ioctl[SIOCSIWENCODEEXT]: Network is down > ioctl[SIOCSIWENCODEEXT]: Network is down > ioctl[SIOCSIWENCODEEXT]: Network is down > ioctl[SIOCSIWENCODEEXT]: Network is down > CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys > ioctl[SIOCSIWENCODEEXT]: Network is down > ioctl[SIOCSIWENCODEEXT]: Network is down > ioctl[SIOCSIWENCODEEXT]: Network is down > ioctl[SIOCSIWENCODEEXT]: Network is down > ioctl[SIOCSIWENCODEEXT]: Network is down > l2_packet_receive - recvfrom: Network is down > ioctl[SIOCSIWAUTH]: Network is down > WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver. > ioctl[SIOCSIWAUTH]: Network is down > WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Network is down > WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAP]: Network is down > NetworkManager: <info> exiting (success) > NetworkManager: <info> exiting (success) > > > (nm-applet:1964): WARNING : _nm_object_get_property: Error > getting 'ActiveAccessPoint' > for /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0: Message > did not receive a reply (timeout by message bus) > > real 1m 59.86s > user 0m 0.48s > sys 0m 0.21s > root@localhost:/# Message: NM disappeared > > > > > > 在2009-11-02 18:23:50，"tommy.hong" <hongjiujing@...> 写道： > > root@localhost:/# NetworkManager --no-daemon > NetworkManager: <info> starting... > NetworkManager: <info> starting... > > ifup: interface lo already configured > NetworkManager: <info> (eth0): driver 'dm9000' does not > support carrier detection. > You must switch to it manually. > NetworkManager: <info> (eth0): driver 'dm9000' does not > support carrier detection. > You must switch to it manually. > > NetworkManager: <info> (eth0): new Ethernet device (driver: > 'dm9000') > NetworkManager: <info> (eth0): new Ethernet device (driver: > 'dm9000') > > NetworkManager: <info> (eth0): exported > as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa > NetworkManager: <info> (eth0): exported > as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa > > NetworkManager: <info> (ra0): driver does not support SSID > scans (scan_capa 0x00). > NetworkManager: <info> (ra0): driver does not support SSID > scans (scan_capa 0x00). > > NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: > 'usb') > NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: > 'usb') > > NetworkManager: <info> (ra0): exported > as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 > NetworkManager: <info> (ra0): exported > as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 > > udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3_serial_unknown_3, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3 > serial_device: /dev/s3c_serial3, driver: s3c-uart > ttyname: s3c_serial3 > sysfs_path get udev > proped: /sys/devices/platform/s3c-uart.3/tty/s3c_serial3 > libudev: 1, gsm: 0, cdma: 0 > hal get : gsm: 0, cdma: 0 > NetworkManager: <info> (s3c_serial3): ignoring due to lack of > mobile broadband capabilties > NetworkManager: <info> (s3c_serial3): ignoring due to lack of > mobile broadband capabilties > > udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2_serial_unknown_2, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2 > serial_device: /dev/s3c_serial2, driver: s3c-uart > ttyname: s3c_serial2 > sysfs_path get udev > proped: /sys/devices/platform/s3c-uart.2/tty/s3c_serial2 > libudev: 1, gsm: 0, cdma: 0 > hal get : gsm: 0, cdma: 0 > NetworkManager: <info> (s3c_serial2): ignoring due to lack of > mobile broadband capabilties > NetworkManager: <info> (s3c_serial2): ignoring due to lack of > mobile broadband capabilties > > udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1_serial_unknown_1, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1 > serial_device: /dev/s3c_serial1, driver: s3c-uart > ttyname: s3c_serial1 > sysfs_path get udev > proped: /sys/devices/platform/s3c-uart.1/tty/s3c_serial1 > libudev: 1, gsm: 0, cdma: 0 > hal get : gsm: 0, cdma: 0 > NetworkManager: <info> (s3c_serial1): ignoring due to lack of > mobile broadband capabilties > NetworkManager: <info> (s3c_serial1): ignoring due to lack of > mobile broadband capabilties > > udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0_serial_unknown_0, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0 > serial_device: /dev/s3c_serial0, driver: s3c-uart > ttyname: s3c_serial0 > sysfs_path get udev > proped: /sys/devices/platform/s3c-uart.0/tty/s3c_serial0 > libudev: 1, gsm: 0, cdma: 0 > hal get : gsm: 0, cdma: 0 > NetworkManager: <info> (s3c_serial0): ignoring due to lack of > mobile broadband capabilties > NetworkManager: <info> (s3c_serial0): ignoring due to lack of > mobile broadband capabilties > > NetworkManager: <info> Trying to start the system settings > daemon... > NetworkManager: <info> Trying to start the system settings > daemon... > > Message: NM appeared > NetworkManager: <info> (eth0): device state change: 1 -> 2 > NetworkManager: <info> (eth0): device state change: 1 -> 2 > > NetworkManager: <info> (eth0): preparing device. > NetworkManager: <info> (eth0): preparing device. > > NetworkManager: <info> (eth0): deactivating device (reason: > 2). > NetworkManager: <info> (eth0): deactivating device (reason: > 2). > > NetworkManager: <info> (eth0): device state change: 2 -> 3 > NetworkManager: <info> (eth0): device state change: 2 -> 3 > > NetworkManager: <info> (ra0): device state change: 1 -> 2 > NetworkManager: <info> (ra0): device state change: 1 -> 2 > > NetworkManager: <info> (ra0): bringing up device. > NetworkManager: <info> (ra0): bringing up device. > > <-- RTMPAllocTxRxRingMemory, Status=0 > -->RTUSBVenderReset > <--RTUSBVenderReset > Key1Str is Invalid key length(0) or Type(0) > Key2Str is Invalid key length(0) or Type(0) > Key3Str is Invalid key length(0) or Type(0) > Key4Str is Invalid key length(0) or Type(0) > 1. Phy Mode = 9 > 2. Phy Mode = 9 > 3. Phy Mode = 9 > RTMPSetPhyMode: channel is out of range, use first channel=1 > MCS Set = ff 00 00 00 01 > <==== rt28xx_init, Status=0 > 0x1300 = 00064300 > NetworkManager: <info> (ra0): preparing device. > NetworkManager: <info> (ra0): preparing device. > > NetworkManager: <info> (ra0): deactivating device (reason: > 2). > NetworkManager: <info> (ra0): deactivating device (reason: > 2). > > NetworkManager: <info> (ra0): device state change: 2 -> 3 > NetworkManager: <info> (ra0): device state change: 2 -> 3 > > ioctl[SIOCSIWAUTH]: Operation not supported > WEXT auth param 4 value 0x0 - NetworkManager: <info> (ra0): > supplicant interface state: starting -> ready > NetworkManager: <info> (ra0): supplicant interface state: > starting -> ready > > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > power off backlight > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 > NetworkManager: <info> Activation (ra0) starting connection > 'Auto midfun' > NetworkManager: <info> Activation (ra0) starting connection > 'Auto midfun' > > NetworkManager: <info> (ra0): device state change: 3 -> 4 > NetworkManager: <info> (ra0): device state change: 3 -> 4 > > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device > Prepare) scheduled... > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device > Prepare) scheduled... > > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device > Prepare) started... > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device > Prepare) started... > > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) scheduled... > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) scheduled... > > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device > Prepare) complete. > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device > Prepare) complete. > > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) starting... > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) starting... > > NetworkManager: <info> (ra0): device state change: 4 -> 5 > NetworkManager: <info> (ra0): device state change: 4 -> 5 > > NetworkManager: <info> Activation (ra0/wireless): access > point 'Auto midfun' has security, but secrets are required. > NetworkManager: <info> Activation (ra0/wireless): access > point 'Auto midfun' has security, but secrets are required. > > NetworkManager: <info> (ra0): device state change: 5 -> 6 > NetworkManager: <info> (ra0): device state change: 5 -> 6 > > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) complete. > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) complete. > > > (nm-applet:1964): WARNING : <WARN> > nm_gconf_get_keyring_items(): > key: /system/networking/private-data/229b9125-d1af-40dd-aa4d-8974724d16b0/802-11-wireless-security/psk > > > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device > Prepare) scheduled... > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device > Prepare) scheduled... > > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device > Prepare) started... > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device > Prepare) started... > > NetworkManager: <info> (ra0): device state change: 6 -> 4 > NetworkManager: <info> (ra0): device state change: 6 -> 4 > > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) scheduled... > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) scheduled... > > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device > Prepare) complete. > NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device > Prepare) complete. > > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) starting... > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) starting... > > NetworkManager: <info> (ra0): device state change: 4 -> 5 > NetworkManager: <info> (ra0): device state change: 4 -> 5 > > NetworkManager: <info> Activation (ra0/wireless): connection > 'Auto midfun' has security, and secrets exist. No new secrets > needed. > NetworkManager: <info> Activation (ra0/wireless): connection > 'Auto midfun' has security, and secrets exist. No new secrets > needed. > > NetworkManager: <info> Config: added 'ssid' value 'midfun' > NetworkManager: <info> Config: added 'ssid' value 'midfun' > > NetworkManager: <info> Config: added 'scan_ssid' value '1' > NetworkManager: <info> Config: added 'scan_ssid' value '1' > > NetworkManager: <info> Config: added 'key_mgmt' value > 'WPA-PSK' > NetworkManager: <info> Config: added 'key_mgmt' value > 'WPA-PSK' > > NetworkManager: <info> Config: added 'psk' value '<omitted>' > NetworkManager: <info> Config: added 'psk' value '<omitted>' > > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) complete. > NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device > Configure) complete. > > NetworkManager: <info> Config: set interface ap_scan to 1 > NetworkManager: <info> Config: set interface ap_scan to 1 > > NetworkManager: <info> (ra0): supplicant connection state: > scanning -> disconnected > NetworkManager: <info> (ra0): supplicant connection state: > scanning -> disconnected > > NetworkManager: <info> (ra0): supplicant connection state: > disconnected -> scanning > NetworkManager: <info> (ra0): supplicant connection state: > disconnected -> scanning > > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 490 > ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) > Trying to associate with 00:1c:b0:91:6e:8c (SSID='midfun' > freq=2437 MHz) > NetworkManager: <info> (ra0): supplicant connection state: > scanning -> associating > NetworkManager: <info> (ra0): supplicant connection state: > scanning -> associating > > Associated with 00:1c:b0:91:6e:8c > NetworkManager: <info> (ra0): supplicant connection state: > associating -> associated > NetworkManager: <info> (ra0): supplicant connection state: > associating -> associated > > NetworkManager: <info> (ra0): supplicant connection state: > associated -> 4-way handshake > NetworkManager: <info> (ra0): supplicant connection state: > associated -> 4-way handshake > > NetworkManager: <info> (ra0): supplicant connection state: > 4-way handshake -> group handshake > NetworkManager: <info> (ra0): supplicant connection state: > 4-way handshake -> group handshake > > WPA: Key negotiation completed with 00:1c:b0:91:6e:8c > [PTK=CCMP GTK=TKIP] > CTRL-EVENT-CONNECTED - Connection to 00:1c:b0:91:6e:8c > completed (auth) [id=0 id_str=] > NetworkManager: <info> (ra0): supplicant connection state: > group handshake -> completed > NetworkManager: <info> (ra0): supplicant connection state: > group handshake -> completed > > NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 > (Device Configure) successful. Connected to wireless network > 'midfun'. > NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 > (Device Configure) successful. Connected to wireless network > 'midfun'. > > NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP > Configure Start) scheduled. > NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP > Configure Start) scheduled. > > NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP > Configure Start) started... > NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP > Configure Start) started... > > NetworkManager: <info> (ra0): device state change: 5 -> 7 > NetworkManager: <info> (ra0): device state change: 5 -> 7 > > NetworkManager: <info> Activation (ra0) Beginning DHCP > transaction. > NetworkManager: <info> Activation (ra0) Beginning DHCP > transaction. > > NetworkManager: <info> dhclient started with pid 2044 > NetworkManager: <info> dhclient started with pid 2044 > > NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP > Configure Start) complete. > NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP > Configure Start) complete. > > Internet Systems Consortium DHCP Client V3.0.2 > Copyright 2004 Internet Systems Consortium. > All rights reserved. > For info, please visit http://www.isc.org/products/DHCP > > can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file > or directory > NetworkManager: <info> DHCP: device ra0 state changed (null) > -> preinit > NetworkManager: <info> DHCP: device ra0 state changed (null) > -> preinit > > Listening on LPF/ra0/00:03:19:94:00:4c > Sending on LPF/ra0/00:03:19:94:00:4c > Sending on Socket/fallback > DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 7 > DHCPOFFER from 192.168.1.2 > DHCPREQUEST on ra0 to 255.255.255.255 port 67 > DHCPACK from 192.168.1.2 > NetworkManager: <info> DHCP: device ra0 state changed preinit > -> bound > NetworkManager: <info> DHCP: device ra0 state changed preinit > -> bound > > NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP > Configure Get) scheduled... > NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP > Configure Get) scheduled... > > NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP > Configure Get) started... > NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP > Configure Get) started... > > NetworkManager: <info> address 192.168.1.114 > NetworkManager: <info> address 192.168.1.114 > > NetworkManager: <info> prefix 24 (255.255.255.0) > NetworkManager: <info> prefix 24 (255.255.255.0) > > NetworkManager: <info> gateway 192.168.1.2 > NetworkManager: <info> gateway 192.168.1.2 > > NetworkManager: <info> nameserver '192.168.1.2' > NetworkManager: <info> nameserver '192.168.1.2' > > NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP > Configure Commit) scheduled... > NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP > Configure Commit) scheduled... > > NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP > Configure Get) complete. > NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP > Configure Get) complete. > > can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file > or directory > bound to 192.168.1.114 -- renewal in 40639 seconds. > NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP > Configure Commit) started... > NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP > Configure Commit) started... > > NetworkManager: <info> (ra0): device state change: 7 -> 8 > NetworkManager: <info> (ra0): device state change: 7 -> 8 > > NetworkManager: <info> Policy set 'Auto midfun' (ra0) as > default for routing and DNS. > NetworkManager: <info> Policy set 'Auto midfun' (ra0) as > default for routing and DNS. > > NetworkManager: <info> Activation (ra0) successful, device > activated. > NetworkManager: <info> Activation (ra0) successful, device > activated. > > NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP > Configure Commit) complete. > NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP > Configure Commit) complete. > > NetworkManager: <info> Trying to start the system settings > daemon... > NetworkManager: <info> Trying to start the system settings > daemon... > > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 > > > > > 在2009-11-02 17:33:31，"tommy.hong" <hongjiujing@...> 写 > 道： > > Platform :arm11 > Networkmanager version :networkmanager 0.7.1 > > Linux kerne:2.6.24.2 > > USB wifi :rtl3070 > > Why Networkmanager gets AP need several time? > > > > root@localhost:/# /etc/init.d/NetworkManager restart > Stopping NetworkManager daemon: NetworkManagersh: you > need to specify whom to kill > . > CTRL-EVENT-TERMINATING - signal 15 received > ioctl[SIOCSIWAUTH]: Operation not supported > WEXT auth param 4 value 0x0 - > Starting NetworkManager daemon: > NetworkManagerdbus_bus_request_name[dbus]: Resource > temporarily unavailable > Could not request DBus service name: already > registered. > Failed to initialize wpa_supplicant > . > root@localhost:/# Terminate the task(RtmpMlmeTask) > with pid(2131)! > Terminate the task(RtmpCmdQTask) with pid(2132)! > Terminate the task(RtmpTimerTask) with pid(2130)! > ---> RTMPFreeTxRxRingMemory > <--- RTMPFreeTxRxRingMemory > Message: NM appeared > \ > > > root@localhost:/# <-- RTMPAllocTxRxRingMemory, > Status=0 > -->RTUSBVenderReset > <--RTUSBVenderReset > > root@localhost:/# > root@localhost:/# > root@localhost:/# > root@localhost:/# Key1Str is Invalid key length(0) or > Type(0) > Key2Str is Invalid key length(0) or Type(0) > Key3Str is Invalid key length(0) or Type(0) > Key4Str is Invalid key length(0) or Type(0) > 1. Phy Mode = 9 > 2. Phy Mode = 9 > 3. Phy Mode = 9 > RTMPSetPhyMode: channel is out of range, use first > channel=1 > MCS Set = ff 00 00 00 01 > > RTMPFilterCalibration - can't find a valid value, > loopcnt=102 stop calibrating<==== rt28xx_init, > Status=0 > 0x1300 = 00064300 > > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > > > need several minutes to get AP! > > but : > > root@localhost:/new3gdriver/image/sbin# ./iwlist ra0 > scanning > ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length > = 766 > ra0 Scan completed : > Cell 01 - Address: 00:14:78:CB:E7:06 > Protocol:802.11b/g > ESSID:"XIZIIUK-NJ" > Mode:Managed > Channel:6 > Quality:13/100 Signal level:-85 > dBm Noise level:-115 dBm > Encryption key:on > Bit Rates:36 Mb/s > IE: WPA Version 1 > Group Cipher : TKIP > Pairwise Ciphers (2) : TKIP > CCMP > Authentication Suites (1) : > PSK > IE: IEEE 802.11i/WPA2 Version 1 > Group Cipher : TKIP > Pairwise Ciphers (2) : TKIP > CCMP > Authentication Suites (1) : > PSK > Preauthentication Supported > Cell 02 - Address: 00:23:CD:48:D6:6A > Protocol:802.11b/g > ESSID:"TP-LINK_48D66A" > Mode:Managed > Channel:6 > Quality:7/100 Signal level:-87 > dBm Noise level:-115 dBm > Encryption key:on > Bit Rates:36 Mb/s > Cell 03 - Address: 00:1C:B0:91:6E:8C > Protocol:802.11g > ESSID:"xxxx" > Mode:Managed > Channel:6 > Quality:63/100 Signal level:-65 > dBm Noise level:-115 dBm > Encryption key:on > Bit Rates:11 Mb/s > IE: WPA Version 1 > Group Cipher : TKIP > Pairwise Ciphers (2) : TKIP > CCMP > Authentication Suites (1) : > PSK > IE: IEEE 802.11i/WPA2 Version 1 > Group Cipher : TKIP > Pairwise Ciphers (2) : TKIP > CCMP > Authentication Suites (1) : > PSK > Cell 04 - Address: 00:23:CD:E7:F3:9E > Protocol:802.11b/g > ESSID:"TP-123" > Mode:Managed > Channel:6 > Quality:0/100 Signal level:-91 > dBm Noise level:-115 dBm > Encryption key:on > Bit Rates:36 Mb/s > Cell 05 - Address: 02:80:D1:C8:32:12 > Protocol:802.11b > ESSID:"axel" > Mode:Ad-Hoc > Channel:11 > Quality:7/100 Signal level:-87 > dBm Noise level:-115 dBm > Encryption key:off > Bit Rates:11 Mb/s > Cell 06 - Address: 02:1B:77:00:00:C8 > Protocol:802.11b/g > ESSID:"LocalGroup" > Mode:Ad-Hoc > Channel:11 > Quality:13/100 Signal level:-85 > dBm Noise level:-115 dBm > Encryption key:off > Bit Rates:11 Mb/s > > can get AP quickly ? > > > I guess it is a driver or H/W issue ? > > Tommy > > > > > > > > > > > > > ______________________________________________________ > 09年新晋3D主流网游《天下贰》，网易六年亿资打造 > > > > ______________________________________________________________ > 09年新晋3D主流网游《天下贰》，网易六年亿资打造 > > > > ______________________________________________________________________ > "雪见"杨幂邀你共品3D国韵网游《天下贰》，海报免费领 > _______________________________________________ > NetworkManager-list mailing list > NetworkManager-list@... > http://mail.gnome.org/mailman/listinfo/networkmanager-list _______________________________________________ NetworkManager-list mailing list NetworkManager-list@... http://mail.gnome.org/mailman/listinfo/networkmanager-list
	Re: Why Networkmanager gets AP need several time? by Dan Williams :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message On Mon, 2009-11-02 at 17:33 +0800, tommy.hong wrote: > > Platform :arm11 > Networkmanager version :networkmanager 0.7.1 > > Linux kerne:2.6.24.2 > > USB wifi :rtl3070 > > Why Networkmanager gets AP need several time? > > > > root@localhost:/# /etc/init.d/NetworkManager restart > Stopping NetworkManager daemon: NetworkManagersh: you need to specify > whom to kill > . > CTRL-EVENT-TERMINATING - signal 15 received > ioctl[SIOCSIWAUTH]: Operation not supported > WEXT auth param 4 value 0x0 - > Starting NetworkManager daemon: > NetworkManagerdbus_bus_request_name[dbus]: Resource temporarily > unavailable > Could not request DBus service name: already registered. This message means that the service is already running; that's either NM or wpa_supplicant. > Failed to initialize wpa_supplicant > . > root@localhost:/# Terminate the task(RtmpMlmeTask) with pid(2131)! > Terminate the task(RtmpCmdQTask) with pid(2132)! > Terminate the task(RtmpTimerTask) with pid(2130)! > ---> RTMPFreeTxRxRingMemory > <--- RTMPFreeTxRxRingMemory > ** Message: NM appeared > \ > > > root@localhost:/# <-- RTMPAllocTxRxRingMemory, Status=0 > -->RTUSBVenderReset > <--RTUSBVenderReset > > root@localhost:/# > root@localhost:/# > root@localhost:/# > root@localhost:/# Key1Str is Invalid key length(0) or Type(0) > Key2Str is Invalid key length(0) or Type(0) > Key3Str is Invalid key length(0) or Type(0) > Key4Str is Invalid key length(0) or Type(0) > 1. Phy Mode = 9 > 2. Phy Mode = 9 > 3. Phy Mode = 9 > RTMPSetPhyMode: channel is out of range, use first channel=1 > MCS Set = ff 00 00 00 01 > > RTMPFilterCalibration - can't find a valid value, loopcnt=102 stop > calibrating<==== rt28xx_init, Status=0 > 0x1300 = 00064300 > > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > > > need several minutes to get AP! This is a driver problem; the driver is not allowing scans at this time, and thus NM doesn't find the AP. The driver needs to be fixed. Given that you're running the ralink vendor driver, I'm not surprised. NM works well with drivers that are included in the Linux kernel, and when you use a driver that's not, you run into problems like this. Kernel-included drivers have passed certain quality bars that vendor drivers like the ralink ones have not. Dan > but : > > root@localhost:/new3gdriver/image/sbin# ./iwlist ra0 scanning > ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length = 766 > ra0 Scan completed : > Cell 01 - Address: 00:14:78:CB:E7:06 > Protocol:802.11b/g > ESSID:"XIZIIUK-NJ" > Mode:Managed > Channel:6 > Quality:13/100 Signal level:-85 dBm Noise > level:-115 dBm > Encryption key:on > Bit Rates:36 Mb/s > IE: WPA Version 1 > Group Cipher : TKIP > Pairwise Ciphers (2) : TKIP CCMP > Authentication Suites (1) : PSK > IE: IEEE 802.11i/WPA2 Version 1 > Group Cipher : TKIP > Pairwise Ciphers (2) : TKIP CCMP > Authentication Suites (1) : PSK > Preauthentication Supported > Cell 02 - Address: 00:23:CD:48:D6:6A > Protocol:802.11b/g > ESSID:"TP-LINK_48D66A" > Mode:Managed > Channel:6 > Quality:7/100 Signal level:-87 dBm Noise > level:-115 dBm > Encryption key:on > Bit Rates:36 Mb/s > Cell 03 - Address: 00:1C:B0:91:6E:8C > Protocol:802.11g > ESSID:"xxxx" > Mode:Managed > Channel:6 > Quality:63/100 Signal level:-65 dBm Noise > level:-115 dBm > Encryption key:on > Bit Rates:11 Mb/s > IE: WPA Version 1 > Group Cipher : TKIP > Pairwise Ciphers (2) : TKIP CCMP > Authentication Suites (1) : PSK > IE: IEEE 802.11i/WPA2 Version 1 > Group Cipher : TKIP > Pairwise Ciphers (2) : TKIP CCMP > Authentication Suites (1) : PSK > Cell 04 - Address: 00:23:CD:E7:F3:9E > Protocol:802.11b/g > ESSID:"TP-123" > Mode:Managed > Channel:6 > Quality:0/100 Signal level:-91 dBm Noise > level:-115 dBm > Encryption key:on > Bit Rates:36 Mb/s > Cell 05 - Address: 02:80:D1:C8:32:12 > Protocol:802.11b > ESSID:"axel" > Mode:Ad-Hoc > Channel:11 > Quality:7/100 Signal level:-87 dBm Noise > level:-115 dBm > Encryption key:off > Bit Rates:11 Mb/s > Cell 06 - Address: 02:1B:77:00:00:C8 > Protocol:802.11b/g > ESSID:"LocalGroup" > Mode:Ad-Hoc > Channel:11 > Quality:13/100 Signal level:-85 dBm Noise > level:-115 dBm > Encryption key:off > Bit Rates:11 Mb/s > > can get AP quickly ? > > > I guess it is a driver or H/W issue ? > > Tommy > > > > > > > > > > > > > ______________________________________________________________________ > 09年新晋3D主流网游《天下贰》，网易六年亿资打造 > _______________________________________________ > NetworkManager-list mailing list > NetworkManager-list@... > http://mail.gnome.org/mailman/listinfo/networkmanager-list _______________________________________________ NetworkManager-list mailing list NetworkManager-list@... http://mail.gnome.org/mailman/listinfo/networkmanager-list
	Re:Re: Re:Re:Why Networkmanager gets AP need several time? by tommy.hong :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message hi,dan! i will check it ! about display ap need several time ?can you suggest something? 在2009-11-03 05:12:33，"Dan Williams" <dcbw@...> 写道： >On Mon, 2009-11-02 at 18:27 +0800, tommy.hong wrote: >> >> root@localhost:/# time NetworkManager --no-daemon >> NetworkManager: <info> starting... >> NetworkManager: <info> starting... > >It looks like two copies of NM are getting started there. Not sure >where that's coming from, but it's wrong. NM itself doesn't do that; >maybe 'time' does somehow? > >Dan > >> ifup: interface lo already configured >> Message: NM appeared >> NetworkManager: <info> (eth0): driver 'dm9000' does not support >> carrier detection. >> You must switch to it manually. >> NetworkManager: <info> (eth0): driver 'dm9000' does not support >> carrier detection. >> You must switch to it manually. >> >> NetworkManager: <info> (eth0): new Ethernet device (driver: 'dm9000') >> NetworkManager: <info> (eth0): new Ethernet device (driver: 'dm9000') >> >> NetworkManager: <info> (eth0): exported >> as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa >> NetworkManager: <info> (eth0): exported >> as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa >> >> NetworkManager: <info> (ra0): driver does not support SSID scans >> (scan_capa 0x00). >> NetworkManager: <info> (ra0): driver does not support SSID scans >> (scan_capa 0x00). >> >> NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'usb') >> NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'usb') >> >> NetworkManager: <info> (ra0): exported >> as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 >> NetworkManager: <info> (ra0): exported >> as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3_serial_unknown_3, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3 >> serial_device: /dev/s3c_serial3, driver: s3c-uart >> ttyname: s3c_serial3 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.3/tty/s3c_serial3 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial3): ignoring due to lack of mobile >> broadband capabilties >> NetworkManager: <info> (s3c_serial3): ignoring due to lack of mobile >> broadband capabilties >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2_serial_unknown_2, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2 >> serial_device: /dev/s3c_serial2, driver: s3c-uart >> ttyname: s3c_serial2 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.2/tty/s3c_serial2 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial2): ignoring due to lack of mobile >> broadband capabilties >> NetworkManager: <info> (s3c_serial2): ignoring due to lack of mobile >> broadband capabilties >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1_serial_unknown_1, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1 >> serial_device: /dev/s3c_serial1, driver: s3c-uart >> ttyname: s3c_serial1 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.1/tty/s3c_serial1 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial1): ignoring due to lack of mobile >> broadband capabilties >> NetworkManager: <info> (s3c_serial1): ignoring due to lack of mobile >> broadband capabilties >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0_serial_unknown_0, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0 >> serial_device: /dev/s3c_serial0, driver: s3c-uart >> ttyname: s3c_serial0 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.0/tty/s3c_serial0 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial0): ignoring due to lack of mobile >> broadband capabilties >> NetworkManager: <info> (s3c_serial0): ignoring due to lack of mobile >> broadband capabilties >> >> NetworkManager: <info> Trying to start the system settings daemon... >> NetworkManager: <info> Trying to start the system settings daemon... >> >> NetworkManager: <info> (eth0): device state change: 1 -> 2 >> NetworkManager: <info> (eth0): device state change: 1 -> 2 >> eth0: link down >> >> NetworkManager: <info> (eth0): bringing up device. >> NetworkManager: <info> (eth0): bringing up device. >> >> NetworkManager: <info> (eth0): preparing device. >> NetworkManager: <info> (eth0): preparing device. >> >> NetworkManager: <info> (eth0): deactivating device (reason: 2). >> NetworkManager: <info> (eth0): deactivating device (reason: 2). >> >> NetworkManager: <info> (ra0): device state change: 1 -> 2 >> NetworkManager: <info> (ra0): device state change: 1 -> 2 >> >> NetworkManager: <info> (ra0): bringing up device. >> NetworkManager: <info> (ra0): bringing up device. >> >> eth0: link up, 10Mbps, half-duplex, lpa 0x0021 >> <-- RTMPAllocTxRxRingMemory, Status=0 >> -->RTUSBVenderReset >> <--RTUSBVenderReset >> Key1Str is Invalid key length(0) or Type(0) >> Key2Str is Invalid key length(0) or Type(0) >> Key3Str is Invalid key length(0) or Type(0) >> Key4Str is Invalid key length(0) or Type(0) >> 1. Phy Mode = 9 >> 2. Phy Mode = 9 >> 3. Phy Mode = 9 >> RTMPSetPhyMode: channel is out of range, use first channel=1 >> MCS Set = ff 00 00 00 01 >> <==== rt28xx_init, Status=0 >> 0x1300 = 00064300 >> NetworkManager: <info> (ra0): preparing device. >> NetworkManager: <info> (ra0): preparing device. >> >> NetworkManager: <info> (ra0): deactivating device (reason: 2). >> NetworkManager: <info> (ra0): deactivating device (reason: 2). >> >> NetworkManager: <info> (eth0): device state change: 2 -> 3 >> NetworkManager: <info> (eth0): device state change: 2 -> 3 >> >> NetworkManager: <info> (ra0): device state change: 2 -> 3 >> NetworkManager: <info> (ra0): device state change: 2 -> 3 >> >> ioctl[SIOCSIWAUTH]: Operation not supported >> WEXT auth param 4 value 0x0 - NetworkManager: <info> (ra0): >> supplicant interface state: starting -> ready >> NetworkManager: <info> (ra0): supplicant interface state: starting >> -> ready >> >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> power off backlight >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 >> NetworkManager: <info> Activation (ra0) starting connection 'Auto >> midfun' >> NetworkManager: <info> Activation (ra0) starting connection 'Auto >> midfun' >> >> NetworkManager: <info> (ra0): device state change: 3 -> 4 >> NetworkManager: <info> (ra0): device state change: 3 -> 4 >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> scheduled... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> started... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> started... >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> complete. >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> complete. >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> >> NetworkManager: <info> Activation (ra0/wireless): access point 'Auto >> midfun' has security, but secrets are required. >> NetworkManager: <info> Activation (ra0/wireless): access point 'Auto >> midfun' has security, but secrets are required. >> >> NetworkManager: <info> (ra0): device state change: 5 -> 6 >> NetworkManager: <info> (ra0): device state change: 5 -> 6 >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> >> >> (nm-applet:1964): WARNING : <WARN> nm_gconf_get_keyring_items(): >> key: /system/networking/private-data/229b9125-d1af-40dd-aa4d-8974724d16b0/802-11-wireless-security/psk >> >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> scheduled... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> started... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> started... >> >> NetworkManager: <info> (ra0): device state change: 6 -> 4 >> NetworkManager: <info> (ra0): device state change: 6 -> 4 >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> complete. >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> complete. >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> >> NetworkManager: <info> Activation (ra0/wireless): connection 'Auto >> midfun' has security, and secrets exist. No new secrets needed. >> NetworkManager: <info> Activation (ra0/wireless): connection 'Auto >> midfun' has security, and secrets exist. No new secrets needed. >> >> NetworkManager: <info> Config: added 'ssid' value 'midfun' >> NetworkManager: <info> Config: added 'ssid' value 'midfun' >> >> NetworkManager: <info> Config: added 'scan_ssid' value '1' >> NetworkManager: <info> Config: added 'scan_ssid' value '1' >> >> NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' >> NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' >> >> NetworkManager: <info> Config: added 'psk' value '<omitted>' >> NetworkManager: <info> Config: added 'psk' value '<omitted>' >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> >> NetworkManager: <info> Config: set interface ap_scan to 1 >> NetworkManager: <info> Config: set interface ap_scan to 1 >> >> NetworkManager: <info> (ra0): supplicant connection state: scanning >> -> disconnected >> NetworkManager: <info> (ra0): supplicant connection state: scanning >> -> disconnected >> >> NetworkManager: <info> (ra0): supplicant connection state: >> disconnected -> scanning >> NetworkManager: <info> (ra0): supplicant connection state: >> disconnected -> scanning >> >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 >> ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) >> Trying to associate with 00:1c:b0:91:6e:8c (SSID='midfun' freq=2437 >> MHz) >> NetworkManager: <info> (ra0): supplicant connection state: scanning >> -> associating >> NetworkManager: <info> (ra0): supplicant connection state: scanning >> -> associating >> >> Associated with 00:1c:b0:91:6e:8c >> NetworkManager: <info> (ra0): supplicant connection state: >> associating -> associated >> NetworkManager: <info> (ra0): supplicant connection state: >> associating -> associated >> >> NetworkManager: <info> (ra0): supplicant connection state: >> associated -> 4-way handshake >> NetworkManager: <info> (ra0): supplicant connection state: >> associated -> 4-way handshake >> >> NetworkManager: <info> (ra0): supplicant connection state: 4-way >> handshake -> group handshake >> NetworkManager: <info> (ra0): supplicant connection state: 4-way >> handshake -> group handshake >> >> WPA: Key negotiation completed with 00:1c:b0:91:6e:8c [PTK=CCMP >> GTK=TKIP] >> CTRL-EVENT-CONNECTED - Connection to 00:1c:b0:91:6e:8c completed >> (auth) [id=0 id_str=] >> NetworkManager: <info> (ra0): supplicant connection state: group >> handshake -> completed >> NetworkManager: <info> (ra0): supplicant connection state: group >> handshake -> completed >> >> NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 (Device >> Configure) successful. Connected to wireless network 'midfun'. >> NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 (Device >> Configure) successful. Connected to wireless network 'midfun'. >> >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure >> Start) scheduled. >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure >> Start) scheduled. >> >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure >> Start) started... >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure >> Start) started... >> >> NetworkManager: <info> (ra0): device state change: 5 -> 7 >> NetworkManager: <info> (ra0): device state change: 5 -> 7 >> >> NetworkManager: <info> Activation (ra0) Beginning DHCP transaction. >> NetworkManager: <info> Activation (ra0) Beginning DHCP transaction. >> >> Internet Systems Consortium DHCP Client V3.0.2 >> Copyright 2004 Internet Systems Consortium. >> All rights reserved. >> For info, please visit http://www.isc.org/products/DHCP >> >> NetworkManager: <info> dhclient started with pid 2106 >> NetworkManager: <info> dhclient started with pid 2106 >> >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure >> Start) complete. >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure >> Start) complete. >> >> can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file or >> directory >> NetworkManager: <info> DHCP: device ra0 state changed (null) -> >> preinit >> NetworkManager: <info> DHCP: device ra0 state changed (null) -> >> preinit >> >> Listening on LPF/ra0/00:03:19:94:00:4c >> Sending on LPF/ra0/00:03:19:94:00:4c >> Sending on Socket/fallback >> >> >> NetworkManager: <WARN> nm_signal_handler(): Caught signal 2, shutting >> down normally. >> NetworkManager: <WARN> nm_signal_handler(): Caught signal 2, shutting >> down normally. >> >> NetworkManager: <info> (eth0): now unmanaged >> NetworkManager: <info> (eth0): now unmanaged >> >> NetworkManager: <info> (eth0): device state change: 3 -> 1 >> NetworkManager: <info> (eth0): device state change: 3 -> 1 >> >> NetworkManager: <info> (eth0): cleaning up... >> NetworkManager: <info> (eth0): cleaning up... >> >> NetworkManager: <info> (eth0): taking down device. >> NetworkManager: <info> (eth0): taking down device. >> >> NetworkManager: <info> (ra0): now unmanaged >> NetworkManager: <info> (ra0): now unmanaged >> >> NetworkManager: <info> (ra0): device state change: 7 -> 1 >> NetworkManager: <info> (ra0): device state change: 7 -> 1 >> >> NetworkManager: <info> (ra0): deactivating device (reason: 36). >> NetworkManager: <info> (ra0): deactivating device (reason: 36). >> >> NetworkManager: <info> ra0: canceled DHCP transaction, dhcp client >> pid 2106 >> NetworkManager: <info> ra0: canceled DHCP transaction, dhcp client >> pid 2106 >> >> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys >> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys >> NetworkManager: <info> (ra0): cleaning up... >> NetworkManager: <info> (ra0): cleaning up... >> >> NetworkManager: <info> (ra0): taking down device. >> NetworkManager: <info> (ra0): taking down device. >> >> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys >> Terminate the task(RtmpMlmeTask) with pid(2104)! >> Terminate the task(RtmpCmdQTask) with pid(2105)! >> Terminate the task(RtmpTimerTask) with pid(2103)! >> ---> RTMPFreeTxRxRingMemory >> <--- RTMPFreeTxRxRingMemory >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> l2_packet_receive - recvfrom: Network is down >> ioctl[SIOCSIWAUTH]: Network is down >> WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver. >> ioctl[SIOCSIWAUTH]: Network is down >> WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Network is down >> WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAP]: Network is down >> NetworkManager: <info> exiting (success) >> NetworkManager: <info> exiting (success) >> >> >> (nm-applet:1964): WARNING : _nm_object_get_property: Error >> getting 'ActiveAccessPoint' >> for /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0: Message >> did not receive a reply (timeout by message bus) >> >> real 1m 59.86s >> user 0m 0.48s >> sys 0m 0.21s >> root@localhost:/# Message: NM disappeared >> >> >> >> >> >> 在2009-11-02 18:23:50，"tommy.hong" <hongjiujing@...> 写道： >> >> root@localhost:/# NetworkManager --no-daemon >> NetworkManager: <info> starting... >> NetworkManager: <info> starting... >> >> ifup: interface lo already configured >> NetworkManager: <info> (eth0): driver 'dm9000' does not >> support carrier detection. >> You must switch to it manually. >> NetworkManager: <info> (eth0): driver 'dm9000' does not >> support carrier detection. >> You must switch to it manually. >> >> NetworkManager: <info> (eth0): new Ethernet device (driver: >> 'dm9000') >> NetworkManager: <info> (eth0): new Ethernet device (driver: >> 'dm9000') >> >> NetworkManager: <info> (eth0): exported >> as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa >> NetworkManager: <info> (eth0): exported >> as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa >> >> NetworkManager: <info> (ra0): driver does not support SSID >> scans (scan_capa 0x00). >> NetworkManager: <info> (ra0): driver does not support SSID >> scans (scan_capa 0x00). >> >> NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: >> 'usb') >> NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: >> 'usb') >> >> NetworkManager: <info> (ra0): exported >> as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 >> NetworkManager: <info> (ra0): exported >> as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3_serial_unknown_3, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3 >> serial_device: /dev/s3c_serial3, driver: s3c-uart >> ttyname: s3c_serial3 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.3/tty/s3c_serial3 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial3): ignoring due to lack of >> mobile broadband capabilties >> NetworkManager: <info> (s3c_serial3): ignoring due to lack of >> mobile broadband capabilties >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2_serial_unknown_2, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2 >> serial_device: /dev/s3c_serial2, driver: s3c-uart >> ttyname: s3c_serial2 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.2/tty/s3c_serial2 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial2): ignoring due to lack of >> mobile broadband capabilties >> NetworkManager: <info> (s3c_serial2): ignoring due to lack of >> mobile broadband capabilties >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1_serial_unknown_1, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1 >> serial_device: /dev/s3c_serial1, driver: s3c-uart >> ttyname: s3c_serial1 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.1/tty/s3c_serial1 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial1): ignoring due to lack of >> mobile broadband capabilties >> NetworkManager: <info> (s3c_serial1): ignoring due to lack of >> mobile broadband capabilties >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0_serial_unknown_0, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0 >> serial_device: /dev/s3c_serial0, driver: s3c-uart >> ttyname: s3c_serial0 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.0/tty/s3c_serial0 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial0): ignoring due to lack of >> mobile broadband capabilties >> NetworkManager: <info> (s3c_serial0): ignoring due to lack of >> mobile broadband capabilties >> >> NetworkManager: <info> Trying to start the system settings >> daemon... >> NetworkManager: <info> Trying to start the system settings >> daemon... >> >> Message: NM appeared >> NetworkManager: <info> (eth0): device state change: 1 -> 2 >> NetworkManager: <info> (eth0): device state change: 1 -> 2 >> >> NetworkManager: <info> (eth0): preparing device. >> NetworkManager: <info> (eth0): preparing device. >> >> NetworkManager: <info> (eth0): deactivating device (reason: >> 2). >> NetworkManager: <info> (eth0): deactivating device (reason: >> 2). >> >> NetworkManager: <info> (eth0): device state change: 2 -> 3 >> NetworkManager: <info> (eth0): device state change: 2 -> 3 >> >> NetworkManager: <info> (ra0): device state change: 1 -> 2 >> NetworkManager: <info> (ra0): device state change: 1 -> 2 >> >> NetworkManager: <info> (ra0): bringing up device. >> NetworkManager: <info> (ra0): bringing up device. >> >> <-- RTMPAllocTxRxRingMemory, Status=0 >> -->RTUSBVenderReset >> <--RTUSBVenderReset >> Key1Str is Invalid key length(0) or Type(0) >> Key2Str is Invalid key length(0) or Type(0) >> Key3Str is Invalid key length(0) or Type(0) >> Key4Str is Invalid key length(0) or Type(0) >> 1. Phy Mode = 9 >> 2. Phy Mode = 9 >> 3. Phy Mode = 9 >> RTMPSetPhyMode: channel is out of range, use first channel=1 >> MCS Set = ff 00 00 00 01 >> <==== rt28xx_init, Status=0 >> 0x1300 = 00064300 >> NetworkManager: <info> (ra0): preparing device. >> NetworkManager: <info> (ra0): preparing device. >> >> NetworkManager: <info> (ra0): deactivating device (reason: >> 2). >> NetworkManager: <info> (ra0): deactivating device (reason: >> 2). >> >> NetworkManager: <info> (ra0): device state change: 2 -> 3 >> NetworkManager: <info> (ra0): device state change: 2 -> 3 >> >> ioctl[SIOCSIWAUTH]: Operation not supported >> WEXT auth param 4 value 0x0 - NetworkManager: <info> (ra0): >> supplicant interface state: starting -> ready >> NetworkManager: <info> (ra0): supplicant interface state: >> starting -> ready >> >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> power off backlight >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 >> NetworkManager: <info> Activation (ra0) starting connection >> 'Auto midfun' >> NetworkManager: <info> Activation (ra0) starting connection >> 'Auto midfun' >> >> NetworkManager: <info> (ra0): device state change: 3 -> 4 >> NetworkManager: <info> (ra0): device state change: 3 -> 4 >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) started... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) started... >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) complete. >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) complete. >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> >> NetworkManager: <info> Activation (ra0/wireless): access >> point 'Auto midfun' has security, but secrets are required. >> NetworkManager: <info> Activation (ra0/wireless): access >> point 'Auto midfun' has security, but secrets are required. >> >> NetworkManager: <info> (ra0): device state change: 5 -> 6 >> NetworkManager: <info> (ra0): device state change: 5 -> 6 >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> >> >> (nm-applet:1964): WARNING : <WARN> >> nm_gconf_get_keyring_items(): >> key: /system/networking/private-data/229b9125-d1af-40dd-aa4d-8974724d16b0/802-11-wireless-security/psk >> >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) started... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) started... >> >> NetworkManager: <info> (ra0): device state change: 6 -> 4 >> NetworkManager: <info> (ra0): device state change: 6 -> 4 >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) complete. >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) complete. >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> >> NetworkManager: <info> Activation (ra0/wireless): connection >> 'Auto midfun' has security, and secrets exist. No new secrets >> needed. >> NetworkManager: <info> Activation (ra0/wireless): connection >> 'Auto midfun' has security, and secrets exist. No new secrets >> needed. >> >> NetworkManager: <info> Config: added 'ssid' value 'midfun' >> NetworkManager: <info> Config: added 'ssid' value 'midfun' >> >> NetworkManager: <info> Config: added 'scan_ssid' value '1' >> NetworkManager: <info> Config: added 'scan_ssid' value '1' >> >> NetworkManager: <info> Config: added 'key_mgmt' value >> 'WPA-PSK' >> NetworkManager: <info> Config: added 'key_mgmt' value >> 'WPA-PSK' >> >> NetworkManager: <info> Config: added 'psk' value '<omitted>' >> NetworkManager: <info> Config: added 'psk' value '<omitted>' >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> >> NetworkManager: <info> Config: set interface ap_scan to 1 >> NetworkManager: <info> Config: set interface ap_scan to 1 >> >> NetworkManager: <info> (ra0): supplicant connection state: >> scanning -> disconnected >> NetworkManager: <info> (ra0): supplicant connection state: >> scanning -> disconnected >> >> NetworkManager: <info> (ra0): supplicant connection state: >> disconnected -> scanning >> NetworkManager: <info> (ra0): supplicant connection state: >> disconnected -> scanning >> >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 490 >> ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) >> Trying to associate with 00:1c:b0:91:6e:8c (SSID='midfun' >> freq=2437 MHz) >> NetworkManager: <info> (ra0): supplicant connection state: >> scanning -> associating >> NetworkManager: <info> (ra0): supplicant connection state: >> scanning -> associating >> >> Associated with 00:1c:b0:91:6e:8c >> NetworkManager: <info> (ra0): supplicant connection state: >> associating -> associated >> NetworkManager: <info> (ra0): supplicant connection state: >> associating -> associated >> >> NetworkManager: <info> (ra0): supplicant connection state: >> associated -> 4-way handshake >> NetworkManager: <info> (ra0): supplicant connection state: >> associated -> 4-way handshake >> >> NetworkManager: <info> (ra0): supplicant connection state: >> 4-way handshake -> group handshake >> NetworkManager: <info> (ra0): supplicant connection state: >> 4-way handshake -> group handshake >> >> WPA: Key negotiation completed with 00:1c:b0:91:6e:8c >> [PTK=CCMP GTK=TKIP] >> CTRL-EVENT-CONNECTED - Connection to 00:1c:b0:91:6e:8c >> completed (auth) [id=0 id_str=] >> NetworkManager: <info> (ra0): supplicant connection state: >> group handshake -> completed >> NetworkManager: <info> (ra0): supplicant connection state: >> group handshake -> completed >> >> NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 >> (Device Configure) successful. Connected to wireless network >> 'midfun'. >> NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 >> (Device Configure) successful. Connected to wireless network >> 'midfun'. >> >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP >> Configure Start) scheduled. >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP >> Configure Start) scheduled. >> >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP >> Configure Start) started... >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP >> Configure Start) started... >> >> NetworkManager: <info> (ra0): device state change: 5 -> 7 >> NetworkManager: <info> (ra0): device state change: 5 -> 7 >> >> NetworkManager: <info> Activation (ra0) Beginning DHCP >> transaction. >> NetworkManager: <info> Activation (ra0) Beginning DHCP >> transaction. >> >> NetworkManager: <info> dhclient started with pid 2044 >> NetworkManager: <info> dhclient started with pid 2044 >> >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP >> Configure Start) complete. >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP >> Configure Start) complete. >> >> Internet Systems Consortium DHCP Client V3.0.2 >> Copyright 2004 Internet Systems Consortium. >> All rights reserved. >> For info, please visit http://www.isc.org/products/DHCP >> >> can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file >> or directory >> NetworkManager: <info> DHCP: device ra0 state changed (null) >> -> preinit >> NetworkManager: <info> DHCP: device ra0 state changed (null) >> -> preinit >> >> Listening on LPF/ra0/00:03:19:94:00:4c >> Sending on LPF/ra0/00:03:19:94:00:4c >> Sending on Socket/fallback >> DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 7 >> DHCPOFFER from 192.168.1.2 >> DHCPREQUEST on ra0 to 255.255.255.255 port 67 >> DHCPACK from 192.168.1.2 >> NetworkManager: <info> DHCP: device ra0 state changed preinit >> -> bound >> NetworkManager: <info> DHCP: device ra0 state changed preinit >> -> bound >> >> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP >> Configure Get) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP >> Configure Get) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP >> Configure Get) started... >> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP >> Configure Get) started... >> >> NetworkManager: <info> address 192.168.1.114 >> NetworkManager: <info> address 192.168.1.114 >> >> NetworkManager: <info> prefix 24 (255.255.255.0) >> NetworkManager: <info> prefix 24 (255.255.255.0) >> >> NetworkManager: <info> gateway 192.168.1.2 >> NetworkManager: <info> gateway 192.168.1.2 >> >> NetworkManager: <info> nameserver '192.168.1.2' >> NetworkManager: <info> nameserver '192.168.1.2' >> >> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP >> Configure Commit) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP >> Configure Commit) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP >> Configure Get) complete. >> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP >> Configure Get) complete. >> >> can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file >> or directory >> bound to 192.168.1.114 -- renewal in 40639 seconds. >> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP >> Configure Commit) started... >> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP >> Configure Commit) started... >> >> NetworkManager: <info> (ra0): device state change: 7 -> 8 >> NetworkManager: <info> (ra0): device state change: 7 -> 8 >> >> NetworkManager: <info> Policy set 'Auto midfun' (ra0) as >> default for routing and DNS. >> NetworkManager: <info> Policy set 'Auto midfun' (ra0) as >> default for routing and DNS. >> >> NetworkManager: <info> Activation (ra0) successful, device >> activated. >> NetworkManager: <info> Activation (ra0) successful, device >> activated. >> >> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP >> Configure Commit) complete. >> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP >> Configure Commit) complete. >> >> NetworkManager: <info> Trying to start the system settings >> daemon... >> NetworkManager: <info> Trying to start the system settings >> daemon... >> >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 >> >> >> >> >> 在2009-11-02 17:33:31，"tommy.hong" <hongjiujing@...> 写 >> 道： >> >> Platform :arm11 >> Networkmanager version :networkmanager 0.7.1 >> >> Linux kerne:2.6.24.2 >> >> USB wifi :rtl3070 >> >> Why Networkmanager gets AP need several time? >> >> >> >> root@localhost:/# /etc/init.d/NetworkManager restart >> Stopping NetworkManager daemon: NetworkManagersh: you >> need to specify whom to kill >> . >> CTRL-EVENT-TERMINATING - signal 15 received >> ioctl[SIOCSIWAUTH]: Operation not supported >> WEXT auth param 4 value 0x0 - >> Starting NetworkManager daemon: >> NetworkManagerdbus_bus_request_name[dbus]: Resource >> temporarily unavailable >> Could not request DBus service name: already >> registered. >> Failed to initialize wpa_supplicant >> . >> root@localhost:/# Terminate the task(RtmpMlmeTask) >> with pid(2131)! >> Terminate the task(RtmpCmdQTask) with pid(2132)! >> Terminate the task(RtmpTimerTask) with pid(2130)! >> ---> RTMPFreeTxRxRingMemory >> <--- RTMPFreeTxRxRingMemory >> Message: NM appeared >> \ >> > >> root@localhost:/# <-- RTMPAllocTxRxRingMemory, >> Status=0 >> -->RTUSBVenderReset >> <--RTUSBVenderReset >> >> root@localhost:/# >> root@localhost:/# >> root@localhost:/# >> root@localhost:/# Key1Str is Invalid key length(0) or >> Type(0) >> Key2Str is Invalid key length(0) or Type(0) >> Key3Str is Invalid key length(0) or Type(0) >> Key4Str is Invalid key length(0) or Type(0) >> 1. Phy Mode = 9 >> 2. Phy Mode = 9 >> 3. Phy Mode = 9 >> RTMPSetPhyMode: channel is out of range, use first >> channel=1 >> MCS Set = ff 00 00 00 01 >> >> RTMPFilterCalibration - can't find a valid value, >> loopcnt=102 stop calibrating<==== rt28xx_init, >> Status=0 >> 0x1300 = 00064300 >> >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> >> >> need several minutes to get AP! >> >> but : >> >> root@localhost:/new3gdriver/image/sbin# ./iwlist ra0 >> scanning >> ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length >> = 766 >> ra0 Scan completed : >> Cell 01 - Address: 00:14:78:CB:E7:06 >> Protocol:802.11b/g >> ESSID:"XIZIIUK-NJ" >> Mode:Managed >> Channel:6 >> Quality:13/100 Signal level:-85 >> dBm Noise level:-115 dBm >> Encryption key:on >> Bit Rates:36 Mb/s >> IE: WPA Version 1 >> Group Cipher : TKIP >> Pairwise Ciphers (2) : TKIP >> CCMP >> Authentication Suites (1) : >> PSK >> IE: IEEE 802.11i/WPA2 Version 1 >> Group Cipher : TKIP >> Pairwise Ciphers (2) : TKIP >> CCMP >> Authentication Suites (1) : >> PSK >> Preauthentication Supported >> Cell 02 - Address: 00:23:CD:48:D6:6A >> Protocol:802.11b/g >> ESSID:"TP-LINK_48D66A" >> Mode:Managed >> Channel:6 >> Quality:7/100 Signal level:-87 >> dBm Noise level:-115 dBm >> Encryption key:on >> Bit Rates:36 Mb/s >> Cell 03 - Address: 00:1C:B0:91:6E:8C >> Protocol:802.11g >> ESSID:"xxxx" >> Mode:Managed >> Channel:6 >> Quality:63/100 Signal level:-65 >> dBm Noise level:-115 dBm >> Encryption key:on >> Bit Rates:11 Mb/s >> IE: WPA Version 1 >> Group Cipher : TKIP >> Pairwise Ciphers (2) : TKIP >> CCMP >> Authentication Suites (1) : >> PSK >> IE: IEEE 802.11i/WPA2 Version 1 >> Group Cipher : TKIP >> Pairwise Ciphers (2) : TKIP >> CCMP >> Authentication Suites (1) : >> PSK >> Cell 04 - Address: 00:23:CD:E7:F3:9E >> Protocol:802.11b/g >> ESSID:"TP-123" >> Mode:Managed >> Channel:6 >> Quality:0/100 Signal level:-91 >> dBm Noise level:-115 dBm >> Encryption key:on >> Bit Rates:36 Mb/s >> Cell 05 - Address: 02:80:D1:C8:32:12 >> Protocol:802.11b >> ESSID:"axel" >> Mode:Ad-Hoc >> Channel:11 >> Quality:7/100 Signal level:-87 >> dBm Noise level:-115 dBm >> Encryption key:off >> Bit Rates:11 Mb/s >> Cell 06 - Address: 02:1B:77:00:00:C8 >> Protocol:802.11b/g >> ESSID:"LocalGroup" >> Mode:Ad-Hoc >> Channel:11 >> Quality:13/100 Signal level:-85 >> dBm Noise level:-115 dBm >> Encryption key:off >> Bit Rates:11 Mb/s >> >> can get AP quickly ? >> >> >> I guess it is a driver or H/W issue ? >> >> Tommy >> >> >> >> >> >> >> >> >> >> >> >> >> ______________________________________________________ >> 09年新晋3D主流网游《天下贰》，网易六年亿资打造 >> >> >> >> ______________________________________________________________ >> 09年新晋3D主流网游《天下贰》，网易六年亿资打造 >> >> >> >> ______________________________________________________________________ >> "雪见"杨幂邀你共品3D国韵网游《天下贰》，海报免费领 >> _______________________________________________ >> NetworkManager-list mailing list >> NetworkManager-list@... >> http://mail.gnome.org/mailman/listinfo/networkmanager-list > 看陆川杨幂新片《琴棋书画》，品网易3D国韵网游《天下贰》 _______________________________________________ NetworkManager-list mailing list NetworkManager-list@... http://mail.gnome.org/mailman/listinfo/networkmanager-list
	Re:Re:Re: Re:Re:Why Networkmanager gets AP need several time? by tommy.hong :: Rate this Message: Reply to Author \| View Threaded \| Show Only this Message hi,dan! I have fix that error! >> NetworkManager: <info> starting... >> NetworkManager: <info> starting... it is caused by loglevel,not 2 copy >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable this isn't a usb wifi driver issue,i just use wpa_supplicant 0.6.3 replace wpa_supplicant 0.5.8,it is OK! At last ,thanks for your suggestion! Tommy@China 在2009-11-03 15:04:49，"tommy.hong" <hongjiujing@...> 写道： hi,dan! i will check it ! about display ap need several time ?can you suggest something? 在2009-11-03 05:12:33，"Dan Williams" <dcbw@...> 写道： >On Mon, 2009-11-02 at 18:27 +0800, tommy.hong wrote: >> >> root@localhost:/# time NetworkManager --no-daemon >> NetworkManager: <info> starting... >> NetworkManager: <info> starting... > >It looks like two copies of NM are getting started there. Not sure >where that's coming from, but it's wrong. NM itself doesn't do that; >maybe 'time' does somehow? > >Dan > >> ifup: interface lo already configured >> Message: NM appeared >> NetworkManager: <info> (eth0): driver 'dm9000' does not support >> carrier detection. >> You must switch to it manually. >> NetworkManager: <info> (eth0): driver 'dm9000' does not support >> carrier detection. >> You must switch to it manually. >> >> NetworkManager: <info> (eth0): new Ethernet device (driver: 'dm9000') >> NetworkManager: <info> (eth0): new Ethernet device (driver: 'dm9000') >> >> NetworkManager: <info> (eth0): exported >> as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa >> NetworkManager: <info> (eth0): exported >> as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa >> >> NetworkManager: <info> (ra0): driver does not support SSID scans >> (scan_capa 0x00). >> NetworkManager: <info> (ra0): driver does not support SSID scans >> (scan_capa 0x00). >> >> NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'usb') >> NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'usb') >> >> NetworkManager: <info> (ra0): exported >> as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 >> NetworkManager: <info> (ra0): exported >> as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3_serial_unknown_3, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3 >> serial_device: /dev/s3c_serial3, driver: s3c-uart >> ttyname: s3c_serial3 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.3/tty/s3c_serial3 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial3): ignoring due to lack of mobile >> broadband capabilties >> NetworkManager: <info> (s3c_serial3): ignoring due to lack of mobile >> broadband capabilties >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2_serial_unknown_2, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2 >> serial_device: /dev/s3c_serial2, driver: s3c-uart >> ttyname: s3c_serial2 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.2/tty/s3c_serial2 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial2): ignoring due to lack of mobile >> broadband capabilties >> NetworkManager: <info> (s3c_serial2): ignoring due to lack of mobile >> broadband capabilties >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1_serial_unknown_1, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1 >> serial_device: /dev/s3c_serial1, driver: s3c-uart >> ttyname: s3c_serial1 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.1/tty/s3c_serial1 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial1): ignoring due to lack of mobile >> broadband capabilties >> NetworkManager: <info> (s3c_serial1): ignoring due to lack of mobile >> broadband capabilties >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0_serial_unknown_0, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0 >> serial_device: /dev/s3c_serial0, driver: s3c-uart >> ttyname: s3c_serial0 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.0/tty/s3c_serial0 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial0): ignoring due to lack of mobile >> broadband capabilties >> NetworkManager: <info> (s3c_serial0): ignoring due to lack of mobile >> broadband capabilties >> >> NetworkManager: <info> Trying to start the system settings daemon... >> NetworkManager: <info> Trying to start the system settings daemon... >> >> NetworkManager: <info> (eth0): device state change: 1 -> 2 >> NetworkManager: <info> (eth0): device state change: 1 -> 2 >> eth0: link down >> >> NetworkManager: <info> (eth0): bringing up device. >> NetworkManager: <info> (eth0): bringing up device. >> >> NetworkManager: <info> (eth0): preparing device. >> NetworkManager: <info> (eth0): preparing device. >> >> NetworkManager: <info> (eth0): deactivating device (reason: 2). >> NetworkManager: <info> (eth0): deactivating device (reason: 2). >> >> NetworkManager: <info> (ra0): device state change: 1 -> 2 >> NetworkManager: <info> (ra0): device state change: 1 -> 2 >> >> NetworkManager: <info> (ra0): bringing up device. >> NetworkManager: <info> (ra0): bringing up device. >> >> eth0: link up, 10Mbps, half-duplex, lpa 0x0021 >> <-- RTMPAllocTxRxRingMemory, Status=0 >> -->RTUSBVenderReset >> <--RTUSBVenderReset >> Key1Str is Invalid key length(0) or Type(0) >> Key2Str is Invalid key length(0) or Type(0) >> Key3Str is Invalid key length(0) or Type(0) >> Key4Str is Invalid key length(0) or Type(0) >> 1. Phy Mode = 9 >> 2. Phy Mode = 9 >> 3. Phy Mode = 9 >> RTMPSetPhyMode: channel is out of range, use first channel=1 >> MCS Set = ff 00 00 00 01 >> <==== rt28xx_init, Status=0 >> 0x1300 = 00064300 >> NetworkManager: <info> (ra0): preparing device. >> NetworkManager: <info> (ra0): preparing device. >> >> NetworkManager: <info> (ra0): deactivating device (reason: 2). >> NetworkManager: <info> (ra0): deactivating device (reason: 2). >> >> NetworkManager: <info> (eth0): device state change: 2 -> 3 >> NetworkManager: <info> (eth0): device state change: 2 -> 3 >> >> NetworkManager: <info> (ra0): device state change: 2 -> 3 >> NetworkManager: <info> (ra0): device state change: 2 -> 3 >> >> ioctl[SIOCSIWAUTH]: Operation not supported >> WEXT auth param 4 value 0x0 - NetworkManager: <info> (ra0): >> supplicant interface state: starting -> ready >> NetworkManager: <info> (ra0): supplicant interface state: starting >> -> ready >> >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> power off backlight >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 >> NetworkManager: <info> Activation (ra0) starting connection 'Auto >> midfun' >> NetworkManager: <info> Activation (ra0) starting connection 'Auto >> midfun' >> >> NetworkManager: <info> (ra0): device state change: 3 -> 4 >> NetworkManager: <info> (ra0): device state change: 3 -> 4 >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> scheduled... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> started... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> started... >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> complete. >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> complete. >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> >> NetworkManager: <info> Activation (ra0/wireless): access point 'Auto >> midfun' has security, but secrets are required. >> NetworkManager: <info> Activation (ra0/wireless): access point 'Auto >> midfun' has security, but secrets are required. >> >> NetworkManager: <info> (ra0): device state change: 5 -> 6 >> NetworkManager: <info> (ra0): device state change: 5 -> 6 >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> >> >> (nm-applet:1964): WARNING : <WARN> nm_gconf_get_keyring_items(): >> key: /system/networking/private-data/229b9125-d1af-40dd-aa4d-8974724d16b0/802-11-wireless-security/psk >> >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> scheduled... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> started... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> started... >> >> NetworkManager: <info> (ra0): device state change: 6 -> 4 >> NetworkManager: <info> (ra0): device state change: 6 -> 4 >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> complete. >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device Prepare) >> complete. >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> >> NetworkManager: <info> Activation (ra0/wireless): connection 'Auto >> midfun' has security, and secrets exist. No new secrets needed. >> NetworkManager: <info> Activation (ra0/wireless): connection 'Auto >> midfun' has security, and secrets exist. No new secrets needed. >> >> NetworkManager: <info> Config: added 'ssid' value 'midfun' >> NetworkManager: <info> Config: added 'ssid' value 'midfun' >> >> NetworkManager: <info> Config: added 'scan_ssid' value '1' >> NetworkManager: <info> Config: added 'scan_ssid' value '1' >> >> NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' >> NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' >> >> NetworkManager: <info> Config: added 'psk' value '<omitted>' >> NetworkManager: <info> Config: added 'psk' value '<omitted>' >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> >> NetworkManager: <info> Config: set interface ap_scan to 1 >> NetworkManager: <info> Config: set interface ap_scan to 1 >> >> NetworkManager: <info> (ra0): supplicant connection state: scanning >> -> disconnected >> NetworkManager: <info> (ra0): supplicant connection state: scanning >> -> disconnected >> >> NetworkManager: <info> (ra0): supplicant connection state: >> disconnected -> scanning >> NetworkManager: <info> (ra0): supplicant connection state: >> disconnected -> scanning >> >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 >> ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) >> Trying to associate with 00:1c:b0:91:6e:8c (SSID='midfun' freq=2437 >> MHz) >> NetworkManager: <info> (ra0): supplicant connection state: scanning >> -> associating >> NetworkManager: <info> (ra0): supplicant connection state: scanning >> -> associating >> >> Associated with 00:1c:b0:91:6e:8c >> NetworkManager: <info> (ra0): supplicant connection state: >> associating -> associated >> NetworkManager: <info> (ra0): supplicant connection state: >> associating -> associated >> >> NetworkManager: <info> (ra0): supplicant connection state: >> associated -> 4-way handshake >> NetworkManager: <info> (ra0): supplicant connection state: >> associated -> 4-way handshake >> >> NetworkManager: <info> (ra0): supplicant connection state: 4-way >> handshake -> group handshake >> NetworkManager: <info> (ra0): supplicant connection state: 4-way >> handshake -> group handshake >> >> WPA: Key negotiation completed with 00:1c:b0:91:6e:8c [PTK=CCMP >> GTK=TKIP] >> CTRL-EVENT-CONNECTED - Connection to 00:1c:b0:91:6e:8c completed >> (auth) [id=0 id_str=] >> NetworkManager: <info> (ra0): supplicant connection state: group >> handshake -> completed >> NetworkManager: <info> (ra0): supplicant connection state: group >> handshake -> completed >> >> NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 (Device >> Configure) successful. Connected to wireless network 'midfun'. >> NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 (Device >> Configure) successful. Connected to wireless network 'midfun'. >> >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure >> Start) scheduled. >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure >> Start) scheduled. >> >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure >> Start) started... >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure >> Start) started... >> >> NetworkManager: <info> (ra0): device state change: 5 -> 7 >> NetworkManager: <info> (ra0): device state change: 5 -> 7 >> >> NetworkManager: <info> Activation (ra0) Beginning DHCP transaction. >> NetworkManager: <info> Activation (ra0) Beginning DHCP transaction. >> >> Internet Systems Consortium DHCP Client V3.0.2 >> Copyright 2004 Internet Systems Consortium. >> All rights reserved. >> For info, please visit http://www.isc.org/products/DHCP >> >> NetworkManager: <info> dhclient started with pid 2106 >> NetworkManager: <info> dhclient started with pid 2106 >> >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure >> Start) complete. >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP Configure >> Start) complete. >> >> can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file or >> directory >> NetworkManager: <info> DHCP: device ra0 state changed (null) -> >> preinit >> NetworkManager: <info> DHCP: device ra0 state changed (null) -> >> preinit >> >> Listening on LPF/ra0/00:03:19:94:00:4c >> Sending on LPF/ra0/00:03:19:94:00:4c >> Sending on Socket/fallback >> >> >> NetworkManager: <WARN> nm_signal_handler(): Caught signal 2, shutting >> down normally. >> NetworkManager: <WARN> nm_signal_handler(): Caught signal 2, shutting >> down normally. >> >> NetworkManager: <info> (eth0): now unmanaged >> NetworkManager: <info> (eth0): now unmanaged >> >> NetworkManager: <info> (eth0): device state change: 3 -> 1 >> NetworkManager: <info> (eth0): device state change: 3 -> 1 >> >> NetworkManager: <info> (eth0): cleaning up... >> NetworkManager: <info> (eth0): cleaning up... >> >> NetworkManager: <info> (eth0): taking down device. >> NetworkManager: <info> (eth0): taking down device. >> >> NetworkManager: <info> (ra0): now unmanaged >> NetworkManager: <info> (ra0): now unmanaged >> >> NetworkManager: <info> (ra0): device state change: 7 -> 1 >> NetworkManager: <info> (ra0): device state change: 7 -> 1 >> >> NetworkManager: <info> (ra0): deactivating device (reason: 36). >> NetworkManager: <info> (ra0): deactivating device (reason: 36). >> >> NetworkManager: <info> ra0: canceled DHCP transaction, dhcp client >> pid 2106 >> NetworkManager: <info> ra0: canceled DHCP transaction, dhcp client >> pid 2106 >> >> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys >> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys >> NetworkManager: <info> (ra0): cleaning up... >> NetworkManager: <info> (ra0): cleaning up... >> >> NetworkManager: <info> (ra0): taking down device. >> NetworkManager: <info> (ra0): taking down device. >> >> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys >> Terminate the task(RtmpMlmeTask) with pid(2104)! >> Terminate the task(RtmpCmdQTask) with pid(2105)! >> Terminate the task(RtmpTimerTask) with pid(2103)! >> ---> RTMPFreeTxRxRingMemory >> <--- RTMPFreeTxRxRingMemory >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> ioctl[SIOCSIWENCODEEXT]: Network is down >> l2_packet_receive - recvfrom: Network is down >> ioctl[SIOCSIWAUTH]: Network is down >> WEXT auth param 7 value 0x0 - Failed to disable WPA in the driver. >> ioctl[SIOCSIWAUTH]: Network is down >> WEXT auth param 5 value 0x0 - ioctl[SIOCSIWAUTH]: Network is down >> WEXT auth param 4 value 0x0 - ioctl[SIOCSIWAP]: Network is down >> NetworkManager: <info> exiting (success) >> NetworkManager: <info> exiting (success) >> >> >> (nm-applet:1964): WARNING : _nm_object_get_property: Error >> getting 'ActiveAccessPoint' >> for /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0: Message >> did not receive a reply (timeout by message bus) >> >> real 1m 59.86s >> user 0m 0.48s >> sys 0m 0.21s >> root@localhost:/# Message: NM disappeared >> >> >> >> >> >> 在2009-11-02 18:23:50，"tommy.hong" <hongjiujing@...> 写道： >> >> root@localhost:/# NetworkManager --no-daemon >> NetworkManager: <info> starting... >> NetworkManager: <info> starting... >> >> ifup: interface lo already configured >> NetworkManager: <info> (eth0): driver 'dm9000' does not >> support carrier detection. >> You must switch to it manually. >> NetworkManager: <info> (eth0): driver 'dm9000' does not >> support carrier detection. >> You must switch to it manually. >> >> NetworkManager: <info> (eth0): new Ethernet device (driver: >> 'dm9000') >> NetworkManager: <info> (eth0): new Ethernet device (driver: >> 'dm9000') >> >> NetworkManager: <info> (eth0): exported >> as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa >> NetworkManager: <info> (eth0): exported >> as /org/freedesktop/Hal/devices/net_00_22_44_66_88_aa >> >> NetworkManager: <info> (ra0): driver does not support SSID >> scans (scan_capa 0x00). >> NetworkManager: <info> (ra0): driver does not support SSID >> scans (scan_capa 0x00). >> >> NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: >> 'usb') >> NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: >> 'usb') >> >> NetworkManager: <info> (ra0): exported >> as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 >> NetworkManager: <info> (ra0): exported >> as /org/freedesktop/Hal/devices/net_usb_device_148f_3070_1_0 >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3_serial_unknown_3, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_3 >> serial_device: /dev/s3c_serial3, driver: s3c-uart >> ttyname: s3c_serial3 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.3/tty/s3c_serial3 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial3): ignoring due to lack of >> mobile broadband capabilties >> NetworkManager: <info> (s3c_serial3): ignoring due to lack of >> mobile broadband capabilties >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2_serial_unknown_2, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_2 >> serial_device: /dev/s3c_serial2, driver: s3c-uart >> ttyname: s3c_serial2 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.2/tty/s3c_serial2 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial2): ignoring due to lack of >> mobile broadband capabilties >> NetworkManager: <info> (s3c_serial2): ignoring due to lack of >> mobile broadband capabilties >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1_serial_unknown_1, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_1 >> serial_device: /dev/s3c_serial1, driver: s3c-uart >> ttyname: s3c_serial1 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.1/tty/s3c_serial1 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial1): ignoring due to lack of >> mobile broadband capabilties >> NetworkManager: <info> (s3c_serial1): ignoring due to lack of >> mobile broadband capabilties >> >> udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0_serial_unknown_0, origdev_udi: /org/freedesktop/Hal/devices/platform_s3c_uart_0 >> serial_device: /dev/s3c_serial0, driver: s3c-uart >> ttyname: s3c_serial0 >> sysfs_path get udev >> proped: /sys/devices/platform/s3c-uart.0/tty/s3c_serial0 >> libudev: 1, gsm: 0, cdma: 0 >> hal get : gsm: 0, cdma: 0 >> NetworkManager: <info> (s3c_serial0): ignoring due to lack of >> mobile broadband capabilties >> NetworkManager: <info> (s3c_serial0): ignoring due to lack of >> mobile broadband capabilties >> >> NetworkManager: <info> Trying to start the system settings >> daemon... >> NetworkManager: <info> Trying to start the system settings >> daemon... >> >> Message: NM appeared >> NetworkManager: <info> (eth0): device state change: 1 -> 2 >> NetworkManager: <info> (eth0): device state change: 1 -> 2 >> >> NetworkManager: <info> (eth0): preparing device. >> NetworkManager: <info> (eth0): preparing device. >> >> NetworkManager: <info> (eth0): deactivating device (reason: >> 2). >> NetworkManager: <info> (eth0): deactivating device (reason: >> 2). >> >> NetworkManager: <info> (eth0): device state change: 2 -> 3 >> NetworkManager: <info> (eth0): device state change: 2 -> 3 >> >> NetworkManager: <info> (ra0): device state change: 1 -> 2 >> NetworkManager: <info> (ra0): device state change: 1 -> 2 >> >> NetworkManager: <info> (ra0): bringing up device. >> NetworkManager: <info> (ra0): bringing up device. >> >> <-- RTMPAllocTxRxRingMemory, Status=0 >> -->RTUSBVenderReset >> <--RTUSBVenderReset >> Key1Str is Invalid key length(0) or Type(0) >> Key2Str is Invalid key length(0) or Type(0) >> Key3Str is Invalid key length(0) or Type(0) >> Key4Str is Invalid key length(0) or Type(0) >> 1. Phy Mode = 9 >> 2. Phy Mode = 9 >> 3. Phy Mode = 9 >> RTMPSetPhyMode: channel is out of range, use first channel=1 >> MCS Set = ff 00 00 00 01 >> <==== rt28xx_init, Status=0 >> 0x1300 = 00064300 >> NetworkManager: <info> (ra0): preparing device. >> NetworkManager: <info> (ra0): preparing device. >> >> NetworkManager: <info> (ra0): deactivating device (reason: >> 2). >> NetworkManager: <info> (ra0): deactivating device (reason: >> 2). >> >> NetworkManager: <info> (ra0): device state change: 2 -> 3 >> NetworkManager: <info> (ra0): device state change: 2 -> 3 >> >> ioctl[SIOCSIWAUTH]: Operation not supported >> WEXT auth param 4 value 0x0 - NetworkManager: <info> (ra0): >> supplicant interface state: starting -> ready >> NetworkManager: <info> (ra0): supplicant interface state: >> starting -> ready >> >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> power off backlight >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 >> NetworkManager: <info> Activation (ra0) starting connection >> 'Auto midfun' >> NetworkManager: <info> Activation (ra0) starting connection >> 'Auto midfun' >> >> NetworkManager: <info> (ra0): device state change: 3 -> 4 >> NetworkManager: <info> (ra0): device state change: 3 -> 4 >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) started... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) started... >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) complete. >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) complete. >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> >> NetworkManager: <info> Activation (ra0/wireless): access >> point 'Auto midfun' has security, but secrets are required. >> NetworkManager: <info> Activation (ra0/wireless): access >> point 'Auto midfun' has security, but secrets are required. >> >> NetworkManager: <info> (ra0): device state change: 5 -> 6 >> NetworkManager: <info> (ra0): device state change: 5 -> 6 >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> >> >> (nm-applet:1964): WARNING : <WARN> >> nm_gconf_get_keyring_items(): >> key: /system/networking/private-data/229b9125-d1af-40dd-aa4d-8974724d16b0/802-11-wireless-security/psk >> >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) started... >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) started... >> >> NetworkManager: <info> (ra0): device state change: 6 -> 4 >> NetworkManager: <info> (ra0): device state change: 6 -> 4 >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) complete. >> NetworkManager: <info> Activation (ra0) Stage 1 of 5 (Device >> Prepare) complete. >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) starting... >> >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> NetworkManager: <info> (ra0): device state change: 4 -> 5 >> >> NetworkManager: <info> Activation (ra0/wireless): connection >> 'Auto midfun' has security, and secrets exist. No new secrets >> needed. >> NetworkManager: <info> Activation (ra0/wireless): connection >> 'Auto midfun' has security, and secrets exist. No new secrets >> needed. >> >> NetworkManager: <info> Config: added 'ssid' value 'midfun' >> NetworkManager: <info> Config: added 'ssid' value 'midfun' >> >> NetworkManager: <info> Config: added 'scan_ssid' value '1' >> NetworkManager: <info> Config: added 'scan_ssid' value '1' >> >> NetworkManager: <info> Config: added 'key_mgmt' value >> 'WPA-PSK' >> NetworkManager: <info> Config: added 'key_mgmt' value >> 'WPA-PSK' >> >> NetworkManager: <info> Config: added 'psk' value '<omitted>' >> NetworkManager: <info> Config: added 'psk' value '<omitted>' >> >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> NetworkManager: <info> Activation (ra0) Stage 2 of 5 (Device >> Configure) complete. >> >> NetworkManager: <info> Config: set interface ap_scan to 1 >> NetworkManager: <info> Config: set interface ap_scan to 1 >> >> NetworkManager: <info> (ra0): supplicant connection state: >> scanning -> disconnected >> NetworkManager: <info> (ra0): supplicant connection state: >> scanning -> disconnected >> >> NetworkManager: <info> (ra0): supplicant connection state: >> disconnected -> scanning >> NetworkManager: <info> (ra0): supplicant connection state: >> disconnected -> scanning >> >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 490 >> ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1) >> Trying to associate with 00:1c:b0:91:6e:8c (SSID='midfun' >> freq=2437 MHz) >> NetworkManager: <info> (ra0): supplicant connection state: >> scanning -> associating >> NetworkManager: <info> (ra0): supplicant connection state: >> scanning -> associating >> >> Associated with 00:1c:b0:91:6e:8c >> NetworkManager: <info> (ra0): supplicant connection state: >> associating -> associated >> NetworkManager: <info> (ra0): supplicant connection state: >> associating -> associated >> >> NetworkManager: <info> (ra0): supplicant connection state: >> associated -> 4-way handshake >> NetworkManager: <info> (ra0): supplicant connection state: >> associated -> 4-way handshake >> >> NetworkManager: <info> (ra0): supplicant connection state: >> 4-way handshake -> group handshake >> NetworkManager: <info> (ra0): supplicant connection state: >> 4-way handshake -> group handshake >> >> WPA: Key negotiation completed with 00:1c:b0:91:6e:8c >> [PTK=CCMP GTK=TKIP] >> CTRL-EVENT-CONNECTED - Connection to 00:1c:b0:91:6e:8c >> completed (auth) [id=0 id_str=] >> NetworkManager: <info> (ra0): supplicant connection state: >> group handshake -> completed >> NetworkManager: <info> (ra0): supplicant connection state: >> group handshake -> completed >> >> NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 >> (Device Configure) successful. Connected to wireless network >> 'midfun'. >> NetworkManager: <info> Activation (ra0/wireless) Stage 2 of 5 >> (Device Configure) successful. Connected to wireless network >> 'midfun'. >> >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP >> Configure Start) scheduled. >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP >> Configure Start) scheduled. >> >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP >> Configure Start) started... >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP >> Configure Start) started... >> >> NetworkManager: <info> (ra0): device state change: 5 -> 7 >> NetworkManager: <info> (ra0): device state change: 5 -> 7 >> >> NetworkManager: <info> Activation (ra0) Beginning DHCP >> transaction. >> NetworkManager: <info> Activation (ra0) Beginning DHCP >> transaction. >> >> NetworkManager: <info> dhclient started with pid 2044 >> NetworkManager: <info> dhclient started with pid 2044 >> >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP >> Configure Start) complete. >> NetworkManager: <info> Activation (ra0) Stage 3 of 5 (IP >> Configure Start) complete. >> >> Internet Systems Consortium DHCP Client V3.0.2 >> Copyright 2004 Internet Systems Consortium. >> All rights reserved. >> For info, please visit http://www.isc.org/products/DHCP >> >> can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file >> or directory >> NetworkManager: <info> DHCP: device ra0 state changed (null) >> -> preinit >> NetworkManager: <info> DHCP: device ra0 state changed (null) >> -> preinit >> >> Listening on LPF/ra0/00:03:19:94:00:4c >> Sending on LPF/ra0/00:03:19:94:00:4c >> Sending on Socket/fallback >> DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 7 >> DHCPOFFER from 192.168.1.2 >> DHCPREQUEST on ra0 to 255.255.255.255 port 67 >> DHCPACK from 192.168.1.2 >> NetworkManager: <info> DHCP: device ra0 state changed preinit >> -> bound >> NetworkManager: <info> DHCP: device ra0 state changed preinit >> -> bound >> >> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP >> Configure Get) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP >> Configure Get) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP >> Configure Get) started... >> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP >> Configure Get) started... >> >> NetworkManager: <info> address 192.168.1.114 >> NetworkManager: <info> address 192.168.1.114 >> >> NetworkManager: <info> prefix 24 (255.255.255.0) >> NetworkManager: <info> prefix 24 (255.255.255.0) >> >> NetworkManager: <info> gateway 192.168.1.2 >> NetworkManager: <info> gateway 192.168.1.2 >> >> NetworkManager: <info> nameserver '192.168.1.2' >> NetworkManager: <info> nameserver '192.168.1.2' >> >> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP >> Configure Commit) scheduled... >> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP >> Configure Commit) scheduled... >> >> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP >> Configure Get) complete. >> NetworkManager: <info> Activation (ra0) Stage 4 of 5 (IP >> Configure Get) complete. >> >> can't create /var/lib/dhcp3/dhclient-ra0.lease: No such file >> or directory >> bound to 192.168.1.114 -- renewal in 40639 seconds. >> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP >> Configure Commit) started... >> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP >> Configure Commit) started... >> >> NetworkManager: <info> (ra0): device state change: 7 -> 8 >> NetworkManager: <info> (ra0): device state change: 7 -> 8 >> >> NetworkManager: <info> Policy set 'Auto midfun' (ra0) as >> default for routing and DNS. >> NetworkManager: <info> Policy set 'Auto midfun' (ra0) as >> default for routing and DNS. >> >> NetworkManager: <info> Activation (ra0) successful, device >> activated. >> NetworkManager: <info> Activation (ra0) successful, device >> activated. >> >> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP >> Configure Commit) complete. >> NetworkManager: <info> Activation (ra0) Stage 5 of 5 (IP >> Configure Commit) complete. >> >> NetworkManager: <info> Trying to start the system settings >> daemon... >> NetworkManager: <info> Trying to start the system settings >> daemon... >> >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 666 >> >> >> >> >> 在2009-11-02 17:33:31，"tommy.hong" <hongjiujing@...> 写 >> 道： >> >> Platform :arm11 >> Networkmanager version :networkmanager 0.7.1 >> >> Linux kerne:2.6.24.2 >> >> USB wifi :rtl3070 >> >> Why Networkmanager gets AP need several time? >> >> >> >> root@localhost:/# /etc/init.d/NetworkManager restart >> Stopping NetworkManager daemon: NetworkManagersh: you >> need to specify whom to kill >> . >> CTRL-EVENT-TERMINATING - signal 15 received >> ioctl[SIOCSIWAUTH]: Operation not supported >> WEXT auth param 4 value 0x0 - >> Starting NetworkManager daemon: >> NetworkManagerdbus_bus_request_name[dbus]: Resource >> temporarily unavailable >> Could not request DBus service name: already >> registered. >> Failed to initialize wpa_supplicant >> . >> root@localhost:/# Terminate the task(RtmpMlmeTask) >> with pid(2131)! >> Terminate the task(RtmpCmdQTask) with pid(2132)! >> Terminate the task(RtmpTimerTask) with pid(2130)! >> ---> RTMPFreeTxRxRingMemory >> <--- RTMPFreeTxRxRingMemory >> Message: NM appeared >> \ >> > >> root@localhost:/# <-- RTMPAllocTxRxRingMemory, >> Status=0 >> -->RTUSBVenderReset >> <--RTUSBVenderReset >> >> root@localhost:/# >> root@localhost:/# >> root@localhost:/# >> root@localhost:/# Key1Str is Invalid key length(0) or >> Type(0) >> Key2Str is Invalid key length(0) or Type(0) >> Key3Str is Invalid key length(0) or Type(0) >> Key4Str is Invalid key length(0) or Type(0) >> 1. Phy Mode = 9 >> 2. Phy Mode = 9 >> 3. Phy Mode = 9 >> RTMPSetPhyMode: channel is out of range, use first >> channel=1 >> MCS Set = ff 00 00 00 01 >> >> RTMPFilterCalibration - can't find a valid value, >> loopcnt=102 stop calibrating<==== rt28xx_init, >> Status=0 >> 0x1300 = 00064300 >> >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> ioctl[SIOCGIWSCAN]: Resource temporarily unavailable >> >> >> need several minutes to get AP! >> >> but : >> >> root@localhost:/new3gdriver/image/sbin# ./iwlist ra0 >> scanning >> ===>rt_ioctl_giwscan. 6(6) BSS returned, data->length >> = 766 >> ra0 Scan completed : >> Cell 01 - Address: 00:14:78:CB:E7:06 >> Protocol:802.11b/g >> ESSID:"XIZIIUK-NJ" >> Mode:Managed >> Channel:6 >> Quality:13/100 Signal level:-85 >> dBm Noise level:-115 dBm >> Encryption key:on >> Bit Rates:36 Mb/s >> IE: WPA Version 1 >> Group Cipher : TKIP >> Pairwise Ciphers (2) : TKIP >> CCMP >> Authentication Suites (1) : >> PSK >> IE: IEEE 802.11i/WPA2 Version 1 >> Group Cipher : TKIP >> Pairwise Ciphers (2) : TKIP >> CCMP >> Authentication Suites (1) : >> PSK >> Preauthentication Supported >> Cell 02 - Address: 00:23:CD:48:D6:6A >> Protocol:802.11b/g >> ESSID:"TP-LINK_48D66A" >> Mode:Managed >> Channel:6 >> Quality:7/100 Signal level:-87 >> dBm Noise level:-115 dBm >> Encryption key:on >> Bit Rates:36 Mb/s >> Cell 03 - Address: 00:1C:B0:91:6E:8C >> Protocol:802.11g >> ESSID:"xxxx" >> Mode:Managed >> Channel:6 >> Quality:63/100 Signal level:-65 >> dBm Noise level:-115 dBm >> Encryption key:on >> Bit Rates:11 Mb/s >> IE: WPA Version 1 >> Group Cipher : TKIP >> Pairwise Ciphers (2) : TKIP >> CCMP >> Authentication Suites (1) : >> PSK >> IE: IEEE 802.11i/WPA2 Version 1 >> Group Cipher : TKIP >> Pairwise Ciphers (2) : TKIP >> CCMP >> Authentication Suites (1) : >> PSK >> Cell 04 - Address: 00:23:CD:E7:F3:9E >> Protocol:802.11b/g >> ESSID:"TP-123" >> Mode:Managed >> Channel:6 >> Quality:0/100 Signal level:-91 >> dBm Noise level:-115 dBm >> Encryption key:on >> Bit Rates:36 Mb/s >> Cell 05 - Address: 02:80:D1:C8:32:12 >> Protocol:802.11b >> ESSID:"axel" >> Mode:Ad-Hoc >> Channel:11 >> Quality:7/100 Signal level:-87 >> dBm Noise level:-115 dBm >> Encryption key:off >> Bit Rates:11 Mb/s >> Cell 06 - Address: 02:1B:77:00:00:C8 >> Protocol:802.11b/g >> ESSID:"LocalGroup" >> Mode:Ad-Hoc >> Channel:11 >> Quality:13/100 Signal level:-85 >> dBm Noise level:-115 dBm >> Encryption key:off >> Bit Rates:11 Mb/s >> >> can get AP quickly ? >> >> >> I guess it is a driver or H/W issue ? >> >> Tommy >> >> >> >> >> >> >> >> >> >> >> >> >> ______________________________________________________ >> 09年新晋3D主流网游《天下贰》，网易六年亿资打造 >> >> >> >> ______________________________________________________________ >> 09年新晋3D主流网游《天下贰》，网易六年亿资打造 >> >> >> >> ______________________________________________________________________ >> "雪见"杨幂邀你共品3D国韵网游《天下贰》，海报免费领 >> _______________________________________________ >> NetworkManager-list mailing list >> NetworkManager-list@... >> http://mail.gnome.org/mailman/listinfo/networkmanager-list > 看陆川杨幂新片《琴棋书画》，品网易3D国韵网游《天下贰》 09年新晋3D主流网游《天下贰》，网易六年亿资打造 _______________________________________________ NetworkManager-list mailing list NetworkManager-list@... http://mail.gnome.org/mailman/listinfo/networkmanager-list

Why Networkmanager gets AP need several time?

Why Networkmanager gets AP need several time?

Re:Why Networkmanager gets AP need several time?

Re:Re:Why Networkmanager gets AP need several time?

Re: Re:Re:Why Networkmanager gets AP need several time?

Re: Why Networkmanager gets AP need several time?

Re:Re: Re:Re:Why Networkmanager gets AP need several time?

Re:Re:Re: Re:Re:Why Networkmanager gets AP need several time?