« Return to Thread: agg::scanline_p8::reset_spans() problem
agg::scanline_p8::reset_spans(
by Petr Kobalíček
::
Rate this Message:
Hi devs,
I'm trying to write my own rasterizer and I have problem with
antigrain classes, this code:
typedef agg::scanline_p8 AggScanlineP8;
AggScanlineP8 slP8;
slP8.reset_spans();
will fail on segmentation fault (memory access exception) at position
0x0000000 (NULL) + something.
I don't know where i'm doing something different than standard
rasterizer_scanline_aa<>.
Please can anybody try the code I posted and if this is designed to
have memory error can anybody explain the point ? Maybe the problem is
in my code, but I tried to reset_spans() after the agg::scanline_p8
instance was created and it's the same.
Cheers
- Petr
To be complete, I'm adding here my code (in future it can be
contribution, now it's only dev version):
--------------------------------------------------------------------
//----------------------------------------------------------------------------
// Anti-Grain Geometry - Version 2.4
// Copyright (C) 2002-2005 Maxim Shemanarev (http://www.antigrain.com)
//
// Permission to copy, use, modify, sell and distribute this software
// is granted provided this copyright notice appears in all copies.
// This software is provided "as is" without express or implied
// warranty, and with no claim as to its suitability for any purpose.
//
//----------------------------------------------------------------------------
//
// The author gratefully acknowleges the support of David Turner,
// Robert Wilhelm, and Werner Lemberg - the authors of the FreeType
// libray - in producing this work. See http://www.freetype.org for details.
//
//----------------------------------------------------------------------------
// Contact: mcseem@...
// mcseemagg@...
// http://www.antigrain.com
//----------------------------------------------------------------------------
//
// Adaptation for 32-bit screen coordinates has been sponsored by
// Liberty Technology Systems, Inc., visit http://lib-sys.com
//
// Liberty Technology Systems, Inc. is the provider of
// PostScript and PDF technology for software developers.
//
//----------------------------------------------------------------------------
//
// This is custom rasterizer that can be used in multithreaded environment
// from multiple threads. Method sweep_scanline() from antigrain
// agg::rasterizer_scanline_aa<> template was replaced to method that accepts
// y coordinate and it's tagged as const. After you serialize your content use
// new sweep_scanline() method with you own Y coordinate.
//
// There is also optional gamma table setter for people who don't want this
// table to be embedded in rasterizer itself (because you can have more
// rasterizers with same gamma table).
//
// Contribution by Petr Kobalicek <kobalicek.petr@...>,
// This contribution follows antigrain licence (Public Domain).
//----------------------------------------------------------------------------
#ifndef AGG_RASTERIZER_SCANLINE_AA_CUSTOM_INCLUDED
#define AGG_RASTERIZER_SCANLINE_AA_CUSTOM_INCLUDED
#include "agg_rasterizer_cells_aa.h"
#include "agg_rasterizer_scanline_aa.h"
#include "agg_rasterizer_sl_clip.h"
#include "agg_gamma_functions.h"
namespace agg
{
// ========================================================================
// [rasterizer_scanline_aa_custom]
// ========================================================================
// Polygon rasterizer that is used to render filled polygons with
// high-quality Anti-Aliasing. Internally, by default, the class uses
// integer coordinates in format 24.8, i.e. 24 bits for integer part
// and 8 bits for fractional - see poly_subpixel_shift. This class can be
// used in the following way:
//
// 1. filling_rule(filling_rule_e ft) - optional.
//
// 2. gamma() - optional.
//
// 3. reset()
//
// 4. move_to(x, y) / line_to(x, y) - make the polygon. One can create
// more than one contour, but each contour must consist of at least 3
// vertices, i.e. move_to(x1, y1); line_to(x2, y2); line_to(x3, y3);
// is the absolute minimum of vertices that define a triangle.
// The algorithm does not check either the number of vertices nor
// coincidence of their coordinates, but in the worst case it just
// won't draw anything.
// The orger of the vertices (clockwise or counterclockwise)
// is important when using the non-zero filling rule (fill_non_zero).
// In this case the vertex order of all the contours must be the same
// if you want your intersecting polygons to be without "holes".
// You actually can use different vertices order. If the contours do not
// intersect each other the order is not important anyway. If they do,
// contours with the same vertex order will be rendered without "holes"
// while the intersecting contours with different orders will
have "holes".
//
// filling_rule() and gamma() can be called anytime before "sweeping".
//------------------------------------------------------------------------
template<class Clip=rasterizer_sl_clip_int> class
rasterizer_scanline_aa_custom
{
enum status
{
status_initial,
status_move_to,
status_line_to,
status_closed
};
public:
typedef Clip clip_type;
typedef typename Clip::conv_type conv_type;
typedef typename Clip::coord_type coord_type;
enum aa_scale_e
{
aa_shift = 8,
aa_scale = 1 << aa_shift,
aa_mask = aa_scale - 1,
aa_scale2 = aa_scale * 2,
aa_mask2 = aa_scale2 - 1
};
//--------------------------------------------------------------------
rasterizer_scanline_aa_custom() :
m_outline(),
m_clipper(),
m_filling_rule(fill_non_zero),
m_auto_close(true),
m_start_x(0),
m_start_y(0),
m_status(status_initial)
{
int i;
for(i = 0; i < aa_scale; i++) m_gamma[i] = i;
}
//--------------------------------------------------------------------
template<class GammaF>
rasterizer_scanline_aa_custom(const GammaF& gamma_function) :
m_outline(),
m_clipper(m_outline),
m_filling_rule(fill_non_zero),
m_auto_close(true),
m_start_x(0),
m_start_y(0),
m_status(status_initial)
{
gamma(gamma_function);
}
//--------------------------------------------------------------------
void reset();
void reset_clipping();
void clip_box(double x1, double y1, double x2, double y2);
void filling_rule(filling_rule_e filling_rule);
void auto_close(bool flag) { m_auto_close = flag; }
//--------------------------------------------------------------------
template<class GammaF> void gamma(const GammaF& gamma_function)
{
int i;
for(i = 0; i < aa_scale; i++)
{
m_gamma[i] = uround(gamma_function(double(i) /
aa_mask) * aa_mask);
}
}
//--------------------------------------------------------------------
unsigned apply_gamma(unsigned cover) const
{
return m_gamma[cover];
}
//--------------------------------------------------------------------
void move_to(int x, int y);
void line_to(int x, int y);
void move_to_d(double x, double y);
void line_to_d(double x, double y);
void close_polygon();
void add_vertex(double x, double y, unsigned cmd);
void edge(int x1, int y1, int x2, int y2);
void edge_d(double x1, double y1, double x2, double y2);
//-------------------------------------------------------------------
template<class VertexSource>
void add_path(VertexSource& vs, unsigned path_id=0)
{
double x;
double y;
unsigned cmd;
vs.rewind(path_id);
if(m_outline.sorted()) reset();
while(!is_stop(cmd = vs.vertex(&x, &y)))
{
add_vertex(x, y, cmd);
}
}
//--------------------------------------------------------------------
int min_x() const { return m_outline.min_x(); }
int min_y() const { return m_outline.min_y(); }
int max_x() const { return m_outline.max_x(); }
int max_y() const { return m_outline.max_y(); }
//--------------------------------------------------------------------
void sort();
//--------------------------------------------------------------------
AGG_INLINE unsigned calculate_alpha(int area) const
{
int cover = area >> (poly_subpixel_shift*2 + 1 - aa_shift);
if(cover < 0) cover = -cover;
if(m_filling_rule == fill_even_odd)
{
cover &= aa_mask2;
if(cover > aa_scale)
{
cover = aa_scale2 - cover;
}
}
if(cover > aa_mask) cover = aa_mask;
return m_gamma[cover];
}
//--------------------------------------------------------------------
template<class Scanline> bool sweep_scanline(Scanline& sl, int y) const
{
if(y > m_outline.max_y()) return false;
sl.reset_spans();
unsigned num_cells = m_outline.scanline_num_cells(y);
const cell_aa* const* cells = m_outline.scanline_cells(y);
int cover = 0;
while(num_cells)
{
const cell_aa* cur_cell = *cells;
int x = cur_cell->x;
int area = cur_cell->area;
unsigned alpha;
cover += cur_cell->cover;
//accumulate all cells with the same X
while(--num_cells)
{
cur_cell = *++cells;
if(cur_cell->x != x) break;
area += cur_cell->area;
cover += cur_cell->cover;
}
if(area)
{
alpha = calculate_alpha((cover <<
(poly_subpixel_shift + 1)) - area);
if(alpha)
{
sl.add_cell(x, alpha);
}
x++;
}
if(num_cells && cur_cell->x > x)
{
alpha = calculate_alpha(cover << (poly_subpixel_shift + 1));
if(alpha)
{
sl.add_span(x, cur_cell->x - x, alpha);
}
}
}
if(sl.num_spans())
{
sl.finalize(y);
return true;
}
else
return false;
}
//--------------------------------------------------------------------
bool hit_test(int tx, int ty) const;
private:
rasterizer_cells_aa<cell_aa> m_outline;
clip_type m_clipper;
int m_gamma[aa_scale];
filling_rule_e m_filling_rule;
bool m_auto_close;
coord_type m_start_x;
coord_type m_start_y;
unsigned m_status;
//--------------------------------------------------------------------
// Disable copying
rasterizer_scanline_aa_custom(const
rasterizer_scanline_aa_custom<Clip>&);
const rasterizer_scanline_aa_custom<Clip>&
operator = (const rasterizer_scanline_aa_custom<Clip>&);
};
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::reset()
{
m_outline.reset();
m_status = status_initial;
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::filling_rule(filling_rule_e
filling_rule)
{
m_filling_rule = filling_rule;
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::clip_box(double x1, double y1,
double x2, double y2)
{
reset();
m_clipper.clip_box(conv_type::upscale(x1), conv_type::upscale(y1),
conv_type::upscale(x2), conv_type::upscale(y2));
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::reset_clipping()
{
reset();
m_clipper.reset_clipping();
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::close_polygon()
{
if(m_status == status_line_to)
{
m_clipper.line_to(m_outline, m_start_x, m_start_y);
m_status = status_closed;
}
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::move_to(int x, int y)
{
if(m_outline.sorted()) reset();
if(m_auto_close) close_polygon();
m_clipper.move_to(m_start_x = conv_type::downscale(x),
m_start_y = conv_type::downscale(y));
m_status = status_move_to;
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::line_to(int x, int y)
{
m_clipper.line_to(m_outline,
conv_type::downscale(x),
conv_type::downscale(y));
m_status = status_line_to;
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::move_to_d(double x, double y)
{
if(m_outline.sorted()) reset();
if(m_auto_close) close_polygon();
m_clipper.move_to(m_start_x = conv_type::upscale(x),
m_start_y = conv_type::upscale(y));
m_status = status_move_to;
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::line_to_d(double x, double y)
{
m_clipper.line_to(m_outline,
conv_type::upscale(x),
conv_type::upscale(y));
m_status = status_line_to;
}
//------------------------------------------------------------------------
template<class Clip>
AGG_INLINE void
rasterizer_scanline_aa_custom<Clip>::add_vertex(double x, double y,
unsigned cmd)
{
if(is_move_to(cmd))
{
move_to_d(x, y);
}
else
if(is_vertex(cmd))
{
line_to_d(x, y);
}
else
if(is_close(cmd))
{
close_polygon();
}
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::edge(int x1, int y1, int
x2, int y2)
{
if(m_outline.sorted()) reset();
m_clipper.move_to(conv_type::downscale(x1), conv_type::downscale(y1));
m_clipper.line_to(m_outline,
conv_type::downscale(x2),
conv_type::downscale(y2));
m_status = status_move_to;
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::edge_d(
double x1, double y1,
double x2, double y2)
{
if(m_outline.sorted()) reset();
m_clipper.move_to(conv_type::upscale(x1), conv_type::upscale(y1));
m_clipper.line_to(m_outline,
conv_type::upscale(x2),
conv_type::upscale(y2));
m_status = status_move_to;
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::sort()
{
if(m_auto_close) close_polygon();
m_outline.sort_cells();
}
//------------------------------------------------------------------------
template<class Clip>
bool rasterizer_scanline_aa_custom<Clip>::hit_test(int tx, int ty) const
{
scanline_hit_test sl(tx);
sweep_scanline(sl, ty);
return sl.hit();
}
}
#endif
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Vector-agg-general mailing list
Vector-agg-general@...
https://lists.sourceforge.net/lists/listinfo/vector-agg-general
I'm trying to write my own rasterizer and I have problem with
antigrain classes, this code:
typedef agg::scanline_p8 AggScanlineP8;
AggScanlineP8 slP8;
slP8.reset_spans();
will fail on segmentation fault (memory access exception) at position
0x0000000 (NULL) + something.
I don't know where i'm doing something different than standard
rasterizer_scanline_aa<>.
Please can anybody try the code I posted and if this is designed to
have memory error can anybody explain the point ? Maybe the problem is
in my code, but I tried to reset_spans() after the agg::scanline_p8
instance was created and it's the same.
Cheers
- Petr
To be complete, I'm adding here my code (in future it can be
contribution, now it's only dev version):
--------------------------------------------------------------------
//----------------------------------------------------------------------------
// Anti-Grain Geometry - Version 2.4
// Copyright (C) 2002-2005 Maxim Shemanarev (http://www.antigrain.com)
//
// Permission to copy, use, modify, sell and distribute this software
// is granted provided this copyright notice appears in all copies.
// This software is provided "as is" without express or implied
// warranty, and with no claim as to its suitability for any purpose.
//
//----------------------------------------------------------------------------
//
// The author gratefully acknowleges the support of David Turner,
// Robert Wilhelm, and Werner Lemberg - the authors of the FreeType
// libray - in producing this work. See http://www.freetype.org for details.
//
//----------------------------------------------------------------------------
// Contact: mcseem@...
// mcseemagg@...
// http://www.antigrain.com
//----------------------------------------------------------------------------
//
// Adaptation for 32-bit screen coordinates has been sponsored by
// Liberty Technology Systems, Inc., visit http://lib-sys.com
//
// Liberty Technology Systems, Inc. is the provider of
// PostScript and PDF technology for software developers.
//
//----------------------------------------------------------------------------
//
// This is custom rasterizer that can be used in multithreaded environment
// from multiple threads. Method sweep_scanline() from antigrain
// agg::rasterizer_scanline_aa<> template was replaced to method that accepts
// y coordinate and it's tagged as const. After you serialize your content use
// new sweep_scanline() method with you own Y coordinate.
//
// There is also optional gamma table setter for people who don't want this
// table to be embedded in rasterizer itself (because you can have more
// rasterizers with same gamma table).
//
// Contribution by Petr Kobalicek <kobalicek.petr@...>,
// This contribution follows antigrain licence (Public Domain).
//----------------------------------------------------------------------------
#ifndef AGG_RASTERIZER_SCANLINE_AA_CUSTOM_INCLUDED
#define AGG_RASTERIZER_SCANLINE_AA_CUSTOM_INCLUDED
#include "agg_rasterizer_cells_aa.h"
#include "agg_rasterizer_scanline_aa.h"
#include "agg_rasterizer_sl_clip.h"
#include "agg_gamma_functions.h"
namespace agg
{
// ========================================================================
// [rasterizer_scanline_aa_custom]
// ========================================================================
// Polygon rasterizer that is used to render filled polygons with
// high-quality Anti-Aliasing. Internally, by default, the class uses
// integer coordinates in format 24.8, i.e. 24 bits for integer part
// and 8 bits for fractional - see poly_subpixel_shift. This class can be
// used in the following way:
//
// 1. filling_rule(filling_rule_e ft) - optional.
//
// 2. gamma() - optional.
//
// 3. reset()
//
// 4. move_to(x, y) / line_to(x, y) - make the polygon. One can create
// more than one contour, but each contour must consist of at least 3
// vertices, i.e. move_to(x1, y1); line_to(x2, y2); line_to(x3, y3);
// is the absolute minimum of vertices that define a triangle.
// The algorithm does not check either the number of vertices nor
// coincidence of their coordinates, but in the worst case it just
// won't draw anything.
// The orger of the vertices (clockwise or counterclockwise)
// is important when using the non-zero filling rule (fill_non_zero).
// In this case the vertex order of all the contours must be the same
// if you want your intersecting polygons to be without "holes".
// You actually can use different vertices order. If the contours do not
// intersect each other the order is not important anyway. If they do,
// contours with the same vertex order will be rendered without "holes"
// while the intersecting contours with different orders will
have "holes".
//
// filling_rule() and gamma() can be called anytime before "sweeping".
//------------------------------------------------------------------------
template<class Clip=rasterizer_sl_clip_int> class
rasterizer_scanline_aa_custom
{
enum status
{
status_initial,
status_move_to,
status_line_to,
status_closed
};
public:
typedef Clip clip_type;
typedef typename Clip::conv_type conv_type;
typedef typename Clip::coord_type coord_type;
enum aa_scale_e
{
aa_shift = 8,
aa_scale = 1 << aa_shift,
aa_mask = aa_scale - 1,
aa_scale2 = aa_scale * 2,
aa_mask2 = aa_scale2 - 1
};
//--------------------------------------------------------------------
rasterizer_scanline_aa_custom() :
m_outline(),
m_clipper(),
m_filling_rule(fill_non_zero),
m_auto_close(true),
m_start_x(0),
m_start_y(0),
m_status(status_initial)
{
int i;
for(i = 0; i < aa_scale; i++) m_gamma[i] = i;
}
//--------------------------------------------------------------------
template<class GammaF>
rasterizer_scanline_aa_custom(const GammaF& gamma_function) :
m_outline(),
m_clipper(m_outline),
m_filling_rule(fill_non_zero),
m_auto_close(true),
m_start_x(0),
m_start_y(0),
m_status(status_initial)
{
gamma(gamma_function);
}
//--------------------------------------------------------------------
void reset();
void reset_clipping();
void clip_box(double x1, double y1, double x2, double y2);
void filling_rule(filling_rule_e filling_rule);
void auto_close(bool flag) { m_auto_close = flag; }
//--------------------------------------------------------------------
template<class GammaF> void gamma(const GammaF& gamma_function)
{
int i;
for(i = 0; i < aa_scale; i++)
{
m_gamma[i] = uround(gamma_function(double(i) /
aa_mask) * aa_mask);
}
}
//--------------------------------------------------------------------
unsigned apply_gamma(unsigned cover) const
{
return m_gamma[cover];
}
//--------------------------------------------------------------------
void move_to(int x, int y);
void line_to(int x, int y);
void move_to_d(double x, double y);
void line_to_d(double x, double y);
void close_polygon();
void add_vertex(double x, double y, unsigned cmd);
void edge(int x1, int y1, int x2, int y2);
void edge_d(double x1, double y1, double x2, double y2);
//-------------------------------------------------------------------
template<class VertexSource>
void add_path(VertexSource& vs, unsigned path_id=0)
{
double x;
double y;
unsigned cmd;
vs.rewind(path_id);
if(m_outline.sorted()) reset();
while(!is_stop(cmd = vs.vertex(&x, &y)))
{
add_vertex(x, y, cmd);
}
}
//--------------------------------------------------------------------
int min_x() const { return m_outline.min_x(); }
int min_y() const { return m_outline.min_y(); }
int max_x() const { return m_outline.max_x(); }
int max_y() const { return m_outline.max_y(); }
//--------------------------------------------------------------------
void sort();
//--------------------------------------------------------------------
AGG_INLINE unsigned calculate_alpha(int area) const
{
int cover = area >> (poly_subpixel_shift*2 + 1 - aa_shift);
if(cover < 0) cover = -cover;
if(m_filling_rule == fill_even_odd)
{
cover &= aa_mask2;
if(cover > aa_scale)
{
cover = aa_scale2 - cover;
}
}
if(cover > aa_mask) cover = aa_mask;
return m_gamma[cover];
}
//--------------------------------------------------------------------
template<class Scanline> bool sweep_scanline(Scanline& sl, int y) const
{
if(y > m_outline.max_y()) return false;
sl.reset_spans();
unsigned num_cells = m_outline.scanline_num_cells(y);
const cell_aa* const* cells = m_outline.scanline_cells(y);
int cover = 0;
while(num_cells)
{
const cell_aa* cur_cell = *cells;
int x = cur_cell->x;
int area = cur_cell->area;
unsigned alpha;
cover += cur_cell->cover;
//accumulate all cells with the same X
while(--num_cells)
{
cur_cell = *++cells;
if(cur_cell->x != x) break;
area += cur_cell->area;
cover += cur_cell->cover;
}
if(area)
{
alpha = calculate_alpha((cover <<
(poly_subpixel_shift + 1)) - area);
if(alpha)
{
sl.add_cell(x, alpha);
}
x++;
}
if(num_cells && cur_cell->x > x)
{
alpha = calculate_alpha(cover << (poly_subpixel_shift + 1));
if(alpha)
{
sl.add_span(x, cur_cell->x - x, alpha);
}
}
}
if(sl.num_spans())
{
sl.finalize(y);
return true;
}
else
return false;
}
//--------------------------------------------------------------------
bool hit_test(int tx, int ty) const;
private:
rasterizer_cells_aa<cell_aa> m_outline;
clip_type m_clipper;
int m_gamma[aa_scale];
filling_rule_e m_filling_rule;
bool m_auto_close;
coord_type m_start_x;
coord_type m_start_y;
unsigned m_status;
//--------------------------------------------------------------------
// Disable copying
rasterizer_scanline_aa_custom(const
rasterizer_scanline_aa_custom<Clip>&);
const rasterizer_scanline_aa_custom<Clip>&
operator = (const rasterizer_scanline_aa_custom<Clip>&);
};
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::reset()
{
m_outline.reset();
m_status = status_initial;
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::filling_rule(filling_rule_e
filling_rule)
{
m_filling_rule = filling_rule;
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::clip_box(double x1, double y1,
double x2, double y2)
{
reset();
m_clipper.clip_box(conv_type::upscale(x1), conv_type::upscale(y1),
conv_type::upscale(x2), conv_type::upscale(y2));
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::reset_clipping()
{
reset();
m_clipper.reset_clipping();
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::close_polygon()
{
if(m_status == status_line_to)
{
m_clipper.line_to(m_outline, m_start_x, m_start_y);
m_status = status_closed;
}
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::move_to(int x, int y)
{
if(m_outline.sorted()) reset();
if(m_auto_close) close_polygon();
m_clipper.move_to(m_start_x = conv_type::downscale(x),
m_start_y = conv_type::downscale(y));
m_status = status_move_to;
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::line_to(int x, int y)
{
m_clipper.line_to(m_outline,
conv_type::downscale(x),
conv_type::downscale(y));
m_status = status_line_to;
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::move_to_d(double x, double y)
{
if(m_outline.sorted()) reset();
if(m_auto_close) close_polygon();
m_clipper.move_to(m_start_x = conv_type::upscale(x),
m_start_y = conv_type::upscale(y));
m_status = status_move_to;
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::line_to_d(double x, double y)
{
m_clipper.line_to(m_outline,
conv_type::upscale(x),
conv_type::upscale(y));
m_status = status_line_to;
}
//------------------------------------------------------------------------
template<class Clip>
AGG_INLINE void
rasterizer_scanline_aa_custom<Clip>::add_vertex(double x, double y,
unsigned cmd)
{
if(is_move_to(cmd))
{
move_to_d(x, y);
}
else
if(is_vertex(cmd))
{
line_to_d(x, y);
}
else
if(is_close(cmd))
{
close_polygon();
}
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::edge(int x1, int y1, int
x2, int y2)
{
if(m_outline.sorted()) reset();
m_clipper.move_to(conv_type::downscale(x1), conv_type::downscale(y1));
m_clipper.line_to(m_outline,
conv_type::downscale(x2),
conv_type::downscale(y2));
m_status = status_move_to;
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::edge_d(
double x1, double y1,
double x2, double y2)
{
if(m_outline.sorted()) reset();
m_clipper.move_to(conv_type::upscale(x1), conv_type::upscale(y1));
m_clipper.line_to(m_outline,
conv_type::upscale(x2),
conv_type::upscale(y2));
m_status = status_move_to;
}
//------------------------------------------------------------------------
template<class Clip>
void rasterizer_scanline_aa_custom<Clip>::sort()
{
if(m_auto_close) close_polygon();
m_outline.sort_cells();
}
//------------------------------------------------------------------------
template<class Clip>
bool rasterizer_scanline_aa_custom<Clip>::hit_test(int tx, int ty) const
{
scanline_hit_test sl(tx);
sweep_scanline(sl, ty);
return sl.hit();
}
}
#endif
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Vector-agg-general mailing list
Vector-agg-general@...
https://lists.sourceforge.net/lists/listinfo/vector-agg-general
« Return to Thread: agg::scanline_p8::reset_spans() problem
| Free embeddable forum powered by Nabble | Forum Help |
