« Return to Thread: autoconf problem
autoconf problem
by Clendon Gibson-2
::
Rate this Message:
Hi folks,
I am trying to install the dxr3 driver on a home computer with a Hollywood RealMagic card. The machine is a 800 MHZ Celeron with Debian Etch on it. I have the 2.6.18-6 kernel.
I attempted to install the development tools to compile the module but I suspect I am missing something. When I do "./configure" in the top level is complains with the following messages.
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
I think this is the relevant portion, but the whole thing is attached.
checking for gcc... gccconfigure:2130: gcc -V >&5
gcc: '-V' option must have argument
configure:2133: $? = 1
configure:2156: checking for C compiler default output file name
configure:2183: gcc conftest.c >&5
/usr/bin/ld: crt1.o: No such file: No such file or directory
collect2: ld returned 1 exit status
I figure that I am missing some portion of the development system, but it is not obvious to me which. Any help is appreciated. Thanks!
P.S. I apologize if this is the typical noob question that gets asked 20 times a day. I really did look at the website FAQ and the e-mail archives for this one and did not see it.
[config.log]
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by EM8300 configure 0.17.1-rc1, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ ./configure
## --------- ##
## Platform. ##
## --------- ##
hostname = Holly
uname -m = i686
uname -r = 2.6.18-6-686
uname -s = Linux
uname -v = #1 SMP Mon Aug 18 08:42:39 UTC 2008
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = i686
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/bin/X11
PATH: /usr/games
## ----------- ##
## Core tests. ##
## ----------- ##
configure:1838: checking for gcc
configure:1854: found /usr/bin/gcc
configure:1865: result: gcc
configure:2103: checking for C compiler version
configure:2110: gcc --version >&5
gcc (GCC) 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2113: $? = 0
configure:2120: gcc -v >&5
Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --with-tune=i686 --enable-checking=release i486-linux-gnu
Thread model: posix
gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)
configure:2123: $? = 0
configure:2130: gcc -V >&5
gcc: '-V' option must have argument
configure:2133: $? = 1
configure:2156: checking for C compiler default output file name
configure:2183: gcc conftest.c >&5
/usr/bin/ld: crt1.o: No such file: No such file or directory
collect2: ld returned 1 exit status
configure:2186: $? = 1
configure:2224: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "EM8300"
| #define PACKAGE_TARNAME "em8300"
| #define PACKAGE_VERSION "0.17.1-rc1"
| #define PACKAGE_STRING "EM8300 0.17.1-rc1"
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:2231: error: C compiler cannot create executables
See `config.log' for more details.
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_prog_ac_ct_CC=gcc
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL=''
ALSA_DIR=''
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR=''
AUTOCONF=''
AUTOHEADER=''
AUTOMAKE=''
AWK=''
CC='gcc'
CCDEPMODE=''
CFLAGS=''
CPP=''
CPPFLAGS=''
CYGPATH_W=''
DEBUG_CFLAGS=''
DEFS=''
DEPDIR=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
FIRMWARE_DIR=''
GLOBAL_CFLAGS=''
GREP=''
GTK_CFLAGS=''
GTK_LIBS=''
HAVE_GTK_FALSE=''
HAVE_GTK_TRUE=''
INSTALL_DATA=''
INSTALL_PROGRAM=''
INSTALL_SCRIPT=''
INSTALL_STRIP_PROGRAM=''
LDFLAGS=''
LIBOBJS=''
LIBS=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE=''
MAKEINFO=''
OBJEXT=''
PACKAGE=''
PACKAGE_BUGREPORT=''
PACKAGE_NAME='EM8300'
PACKAGE_STRING='EM8300 0.17.1-rc1'
PACKAGE_TARNAME='em8300'
PACKAGE_VERSION='0.17.1-rc1'
PATH_SEPARATOR=':'
PKG_CONFIG=''
SET_MAKE=''
SHELL='/bin/sh'
STRIP=''
VERSION=''
ac_ct_CC='gcc'
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include=''
am__leading_dot=''
am__quote=''
am__tar=''
am__untar=''
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh=''
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p=''
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='NONE'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define PACKAGE_NAME "EM8300"
#define PACKAGE_TARNAME "em8300"
#define PACKAGE_VERSION "0.17.1-rc1"
#define PACKAGE_STRING "EM8300 0.17.1-rc1"
#define PACKAGE_BUGREPORT ""
configure: exit 77
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Dxr3-devel mailing list
Dxr3-devel@...
https://lists.sourceforge.net/lists/listinfo/dxr3-devel
I am trying to install the dxr3 driver on a home computer with a Hollywood RealMagic card. The machine is a 800 MHZ Celeron with Debian Etch on it. I have the 2.6.18-6 kernel.
I attempted to install the development tools to compile the module but I suspect I am missing something. When I do "./configure" in the top level is complains with the following messages.
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
See `config.log' for more details.
I think this is the relevant portion, but the whole thing is attached.
checking for gcc... gccconfigure:2130: gcc -V >&5
gcc: '-V' option must have argument
configure:2133: $? = 1
configure:2156: checking for C compiler default output file name
configure:2183: gcc conftest.c >&5
/usr/bin/ld: crt1.o: No such file: No such file or directory
collect2: ld returned 1 exit status
I figure that I am missing some portion of the development system, but it is not obvious to me which. Any help is appreciated. Thanks!
P.S. I apologize if this is the typical noob question that gets asked 20 times a day. I really did look at the website FAQ and the e-mail archives for this one and did not see it.
[config.log]
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by EM8300 configure 0.17.1-rc1, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ ./configure
## --------- ##
## Platform. ##
## --------- ##
hostname = Holly
uname -m = i686
uname -r = 2.6.18-6-686
uname -s = Linux
uname -v = #1 SMP Mon Aug 18 08:42:39 UTC 2008
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = i686
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/bin/X11
PATH: /usr/games
## ----------- ##
## Core tests. ##
## ----------- ##
configure:1838: checking for gcc
configure:1854: found /usr/bin/gcc
configure:1865: result: gcc
configure:2103: checking for C compiler version
configure:2110: gcc --version >&5
gcc (GCC) 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)
Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:2113: $? = 0
configure:2120: gcc -v >&5
Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --with-tune=i686 --enable-checking=release i486-linux-gnu
Thread model: posix
gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)
configure:2123: $? = 0
configure:2130: gcc -V >&5
gcc: '-V' option must have argument
configure:2133: $? = 1
configure:2156: checking for C compiler default output file name
configure:2183: gcc conftest.c >&5
/usr/bin/ld: crt1.o: No such file: No such file or directory
collect2: ld returned 1 exit status
configure:2186: $? = 1
configure:2224: result:
configure: failed program was:
| /* confdefs.h. */
| #define PACKAGE_NAME "EM8300"
| #define PACKAGE_TARNAME "em8300"
| #define PACKAGE_VERSION "0.17.1-rc1"
| #define PACKAGE_STRING "EM8300 0.17.1-rc1"
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:2231: error: C compiler cannot create executables
See `config.log' for more details.
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_prog_ac_ct_CC=gcc
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL=''
ALSA_DIR=''
AMDEPBACKSLASH=''
AMDEP_FALSE=''
AMDEP_TRUE=''
AMTAR=''
AUTOCONF=''
AUTOHEADER=''
AUTOMAKE=''
AWK=''
CC='gcc'
CCDEPMODE=''
CFLAGS=''
CPP=''
CPPFLAGS=''
CYGPATH_W=''
DEBUG_CFLAGS=''
DEFS=''
DEPDIR=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EXEEXT=''
FIRMWARE_DIR=''
GLOBAL_CFLAGS=''
GREP=''
GTK_CFLAGS=''
GTK_LIBS=''
HAVE_GTK_FALSE=''
HAVE_GTK_TRUE=''
INSTALL_DATA=''
INSTALL_PROGRAM=''
INSTALL_SCRIPT=''
INSTALL_STRIP_PROGRAM=''
LDFLAGS=''
LIBOBJS=''
LIBS=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE=''
MAKEINFO=''
OBJEXT=''
PACKAGE=''
PACKAGE_BUGREPORT=''
PACKAGE_NAME='EM8300'
PACKAGE_STRING='EM8300 0.17.1-rc1'
PACKAGE_TARNAME='em8300'
PACKAGE_VERSION='0.17.1-rc1'
PATH_SEPARATOR=':'
PKG_CONFIG=''
SET_MAKE=''
SHELL='/bin/sh'
STRIP=''
VERSION=''
ac_ct_CC='gcc'
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include=''
am__leading_dot=''
am__quote=''
am__tar=''
am__untar=''
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh=''
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p=''
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='NONE'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define PACKAGE_NAME "EM8300"
#define PACKAGE_TARNAME "em8300"
#define PACKAGE_VERSION "0.17.1-rc1"
#define PACKAGE_STRING "EM8300 0.17.1-rc1"
#define PACKAGE_BUGREPORT ""
configure: exit 77
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Dxr3-devel mailing list
Dxr3-devel@...
https://lists.sourceforge.net/lists/listinfo/dxr3-devel
« Return to Thread: autoconf problem
| Free embeddable forum powered by Nabble | Forum Help |
