cell card on vaio p

[Lawrence-Sporkton]

I have just installed 4.6 on a Sony Vaio P with the built in cell card,
however I cant find the cell card anywhere in dmesg or other(below is
dmesg, usbdevs and pcidump). I know the card worked under vista which is
what comes stock on the laptop. I cant seem to find any real specs on the
card online. As for specs, mostly just says "broadband built in"

Drivers for vista indicate this is a gobi by qualcomm device which
appears to be PCI Express Mini attached
I believe its the Gobi 1000 or Gobi UNDP-1 which appear to be the same
device

Why would i not be able to see this device?

Thank you,
Lawrence

OpenBSD 4.6 (GENERIC.MP) #89: Thu Jul  9 21:32:39 MDT 2009
deraadt@...:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz ("GenuineIntel" 686-class)
1.34 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,xTPR
real mem  = 2136887296 (2037MB)
avail mem = 2057449472 (1962MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/08/08, SMBIOS rev. 2.4 @ 0xff4c0
(16 entries)
bios0: vendor INSYDE version "R1250U3" date 12/08/2008
bios0: Sony Corporation VGN-P530H
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC MCFG SLIC ASF! BOOT SSDT
acpi0: wakeup devices MLAN(S3) WLAN(S3) USB1(S3) USB2(S3) USB3(S3)
EHC1(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU Z520 @ 1.33GHz ("GenuineIntel" 686-class)
1.34 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,xTPR
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature 100 degC
acpibat0 at acpi0: BAT0 type Lion oem "Sony Corporation"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
acpivout1 at acpivideo0: DD02
acpivout2 at acpivideo0: DD03
acpivout3 at acpivideo0: DD04
bios0: ROM list: 0xc0000/0x10000!
cpu0: Enhanced SpeedStep 1334 MHz: speeds: 1333, 1066, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel US15W Host" rev 0x06
vga1 at pci0 dev 2 function 0 "Intel US15W Video" rev 0x06
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp at vga1 not configured
azalia0 at pci0 dev 27 function 0 "Intel SCH HD Audio" rev 0x06: apic 8
int 19 (irq 11)
azalia0: RIRB time out
azalia0: codecs: Realtek ALC262
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel SCH PCIE" rev 0x06: apic 8 int 16
(irq 11)
pci1 at ppb0 bus 1
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8057" rev 0x10, Yukon-2
Ultra2 (0x0): apic 8 int 16 (irq 11)
msk0 at mskc0 port A: address 00:1d:ba:6b:7c:16
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb1 at pci0 dev 28 function 1 "Intel SCH PCIE" rev 0x06: apic 8 int 17
(irq 10)
pci2 at ppb1 bus 2
"Atheros AR9281" rev 0x01 at pci2 dev 0 function 0 not configured
uhci0 at pci0 dev 29 function 0 "Intel SCH USB" rev 0x06: apic 8 int 21
(irq 255)
uhci1 at pci0 dev 29 function 1 "Intel SCH USB" rev 0x06: apic 8 int 22
(irq 255)
uhci2 at pci0 dev 29 function 2 "Intel SCH USB" rev 0x06: apic 8 int 23
(irq 255)
ehci0 at pci0 dev 29 function 7 "Intel SCH USB" rev 0x06: apic 8 int 20
(irq 255)
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel SCH LPC" rev 0x06
pciide0 at pci0 dev 31 function 1 "Intel SCH IDE" rev 0x06: DMA, channel
0 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK6028GAL>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 7 configuration 1 interface 0 "Sony UMH-U10" rev
2.00/1.75 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Sony, USB HS-MS, 1.75> SCSI0 0/direct
removable
sd0: drive offline
sd1 at scsibus0 targ 1 lun 1: <Sony, USB HS-SD/MMC, 1.75> SCSI0 0/direct
removable
sd1: 1954MB, 512 bytes/sec, 4001792 sec total
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Ricoh VGP-VCCX
Camera" rev 2.00/20.01 addr 3
video0 at uvideo0
ubt0 at uhub2 port 2 "Broadcom Corp BCM2046 Bluetooth Device" rev
2.00/2.27 addr 2
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
msk0: watchdog timeout
ubt0 detached
ubt0 at uhub2 port 2 "Broadcom Corp BCM2046 Bluetooth Device" rev
2.00/2.27 addr 2

# pcidump
Domain /dev/pci0:
 0:0:0: Intel US15W Host
 0:2:0: Intel US15W Video
 0:27:0: Intel SCH HD Audio
 0:28:0: Intel SCH PCIE
 0:28:1: Intel SCH PCIE
 0:29:0: Intel SCH USB
 0:29:1: Intel SCH USB
 0:29:2: Intel SCH USB
 0:29:7: Intel SCH USB
 0:31:0: Intel SCH LPC
 0:31:1: Intel SCH IDE
 1:0:0: Marvell Yukon 88E8057
 2:0:0: Atheros AR9281

# usbdevs
addr 1: EHCI root hub, Intel
 addr 2: UMH-U10, Sony
 addr 3: VGP-VCCX Camera, Ricoh
addr 1: UHCI root hub, Intel
addr 1: UHCI root hub, Intel
 addr 2: BCM2046 Bluetooth Device, Broadcom Corp
addr 1: UHCI root hub, Intel

[Brian A. Seklecki (CFI NOC)]

On Fri, 2009-10-30 at 12:01 -0700, Lawrence-Sporkton wrote:
> I believe its the Gobi 1000 or Gobi UNDP-1 which appear to be the same
> device

Very odd.  This is a CDMA/3G/GSM/EVDO modem?

Normally they show up as PCMICIA, USB, or PCI Serial devices.

A lot of times the PCMCIA ones present a USB Host Controller which
presents a UCOM and UMASS (with the drivers).

I was just reading that the Cricket USB one has to have a special
GNU/Linux driver that switches it from UMASS to UCOMM for PPP:

http://www.ubuntugeek.com/how-to-setup-cricket-wireless-a600-broadband-modem-in-ubuntu.html

Anyway, you may be a pilgrim on unholy lands.

~BAS