I have insteon lights in my bedroom, they work fine, and are
controlled by a scene defined as:
IPLL, PLM:10, bed_both_scene, all_scenes, PLM
SCENE_MEMBER, bedroom_light1, bed_both_scene, 100%, 2s
SCENE_MEMBER, bedroom_light2, bed_both_scene, 100%, 2s
I also have an x10 wireless remote I would like to use to control it,
I defined it as:
X10SL, A3, x10_bedroom_light, All_Lights,
PLM,
I then made the following code:
if( $state = $x10_bedroom_light->state_now()){
$bed_both_scene->set($state);
print_log "x10 said bedroom light $state";
}
When I hit 'ON' I get the following logged:
07/01/09 11:04:10 PM XA3: x10_bedroom_light manual
07/01/09 11:04:10 PM x10 said bedroom light manual
And the lights turn on, but I can't turn them off, why is the switch
being set to 'manual' and not the actually ON and OFF codes being
sent? If I remove the A3 device, and just watch the logs the PLM is
correctly seeing them as A3 ON and A3 OFF, but ignores this
information when I define a name to go with it.
Thanks,
Brock Palen
brockp@...
www.mlds-networks.com
MLDS Owner Senior Tech.
------------------------------------------------------------------------------
________________________________________________________
To unsubscribe from this list, go to:
http://sourceforge.net/mail/?group_id=1365
