cpu1: failed to become ready

[Marcelo Schmidt-2]

Problem:
cpu1 at mainbus0: apid 6 (application processor)
cpu1: starting
cpu1: failed to become ready

The system has 2 Xeon 2.66Mhz with HT.  Randomly one cpu or another might
fail become ready between reboots.  Anyone had found this issue before?

NetBSD moon 4.0_RC3 NetBSD 4.0_RC3 (GENERIC.MP) #0: Tue Oct 16 01:41:36 PDT 2007  builds@wb34:/home/builds/ab/netbsd-4-0-RC3/i386/200710160011Z-obj/home/builds/ab/netbsd-4-0-RC3/src/sys/arch/i386/compile/GENERIC.MP i386

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_RC3 (GENERIC.MP) #0: Tue Oct 16 01:41:36 PDT 2007
        builds@wb34:/home/builds/ab/netbsd-4-0-RC3/i386/200710160011Z-obj/home/builds/ab/netbsd-4-0-RC3/src/sys/arch/i386/compile/GENERIC.MP
total memory = 3071 MB
rbus: rbus_min_start set to 0xc0000000
avail memory = 3005 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd6e0
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Xeon (686-class), 2657.98 MHz, id 0xf25
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 4400<CID,xTPR>
cpu0: "Intel(R) Xeon(TM) CPU 2.66GHz"
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 512 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: enabling thermal monitor 1 ... enabled.
cpu0: calibrating local timer
cpu0: apic clock running at 132 MHz
cpu0: 16 page colors
cpu1 at mainbus0: apid 6 (application processor)
cpu1: starting
cpu1: failed to become ready
cpu2 at mainbus0: apid 1 (application processor)
cpu2: starting
cpu2: Intel Xeon (686-class), 2657.82 MHz, id 0xf25
cpu2: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu2: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu2: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu2: features2 4400<CID,xTPR>
cpu2: "Intel(R) Xeon(TM) CPU 2.66GHz"
cpu2: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu2: L2 cache 512 KB 64B/line 8-way
cpu2: ITLB 4K/4M: 64 entries
cpu2: DTLB 4K/4M: 64 entries
cpu2: using thermal monitor 1
cpu3 at mainbus0: apid 7 (application processor)
cpu3: starting
cpu3: Intel Xeon (686-class), 2657.83 MHz, id 0xf25
cpu3: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu3: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu3: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu3: features2 4400<CID,xTPR>
cpu3: "Intel(R) Xeon(TM) CPU 2.66GHz"
cpu3: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu3: L2 cache 512 KB 64B/line 8-way
cpu3: ITLB 4K/4M: 64 entries
cpu3: DTLB 4K/4M: 64 entries
cpu3: using thermal monitor 1
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 3 (I/O APIC)
ioapic1: pa 0xfec80000, version 20, 24 pins
ioapic2 at mainbus0 apid 4 (I/O APIC)
ioapic2: pa 0xfec80400, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
INT0800 [Intel FWH Random Number Generator] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: reported by CPUID; using exception 16
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0A06 [Generic Container Device] at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
com3 at acpi0 (PNP0501-1)
com3: io 0x3f8-0x3ff irq 4
com3: ns16550a, working fifo
com3: console
com4 at acpi0 (PNP0501-2)
com4: io 0x2f8-0x2ff irq 3
com4: ns16550a, working fifo
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel E7501 MCH Host (rev. 0x01)
Intel E7500 MCH DRAM Controller (undefined subclass 0x00, revision 0x01) at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0: Intel E7500 MCH HI_B vppb 1 (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x04) at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0: Intel 82870P2 P64H2 PCI-PCI Bridge (rev. 0x04)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x04) at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0: Intel 82870P2 P64H2 PCI-PCI Bridge (rev. 0x04)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
twe0 at pci3 dev 1 function 0: 3ware Escalade
twe0: interrupting at ioapic2 pin 0 (irq 10)
twe0: 4 ports, Firmware FE7X 1.05.00.056, BIOS BE7X 1.08.00.046
twe0: Monitor ME7X 1.01.00.038, PCB Rev4    , Achip 3.20    , Pchip 1.30-66
twe0: port 0: Maxtor 6Y200P0                           194481 MB
twe0: port 1: Maxtor 6Y200P0                           194481 MB
twe0: port 2: Maxtor 6Y200P0                           194481 MB
twe0: port 3: Maxtor 6Y200P0                           194481 MB
ld0 at twe0 unit 0: TwinStor, status: Normal
ld0: 189 GB, 24792 cyl, 255 head, 63 sec, 512 bytes/sect x 398295040 sectors
ld1 at twe0 unit 2: TwinStor, status: Normal
ld1: 189 GB, 24792 cyl, 255 head, 63 sec, 512 bytes/sect x 398295040 sectors
Intel E7500 MCH HI_B vppb 2 (undefined subclass 0x00, revision 0x01) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0: Intel 82801CA USB Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801CA USB Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19 (irq 5)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801CA USB Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18 (irq 10)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ppb3 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x42)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
vga1 at pci4 dev 3 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
fxp0 at pci4 dev 4 function 0: i82550 Ethernet, rev 13
fxp0: interrupting at ioapic0 pin 20 (irq 10)
fxp0: Ethernet address 00:02:b3:d8:b8:9c
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wm0 at pci4 dev 5 function 0: Intel i82540EM 1000BASE-T Ethernet, rev. 2
wm0: interrupting at ioapic0 pin 23 (irq 11)
wm0: 32-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:02:b3:d8:b9:1d
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801CA LPC Interface (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
Intel 82801CA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
ioapic1: enabling
ioapic2: enabling
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
cpu2: CPU 1 running
cpu3: CPU 7 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

--
-m

==========================================================================
pub   2048R/D149C1B5 2006-05-08
      Key fingerprint = 4DD5 DEBA 28BF FDDA 09EC  3C6B 8504 4FB7 D149 C1B5
uid            Marcelo R. Schmidt (SavvyByte LLC) <mschmidt@...>
gpg --keyserver pgp.mit.edu --recv-keys 0xD149C1B5
==========================================================================