« Return to Thread: em8300 - no audio output
em8300 - no audio output
by misiolo
::
Rate this Message:
Hi all, this is my first post to this list.
Not totally sure if the devel forum is the best place to post this as I am certainly not a em8300 developer.
No matter what I trying to do, I am unable to make the analog audio work on my H+ card. Only getting noise.
Been using Linux for a few years now, but consider myself a 'perpetual newbie'
My computer is a thin client Teco TR5670, 512 MB RAM, 1GHz Crusoe CPU, 18 GB hd.
=================================
00:00.0 Host bridge: Transmeta Corporation LongRun Northbridge (rev 03)
Subsystem: Transmeta Corporation Device 0295
Flags: bus master, medium devsel, latency 8
Memory at f0100000 (32-bit, non-prefetchable) [size=1M]
Kernel modules: efficeon-agp
00:00.1 RAM memory: Transmeta Corporation SDRAM controller
Subsystem: Transmeta Corporation Device 0295
Flags: fast devsel
00:00.2 RAM memory: Transmeta Corporation BIOS scratchpad
Subsystem: Transmeta Corporation Device 0295
Flags: fast devsel
00:09.0 VGA compatible controller: Silicon Integrated Systems [SiS] 315PRO PCI/AGP VGA Display Adapter (prog-if 00 [VGA controller])
Flags: bus master, 66MHz, medium devsel, latency 71
BIST result: 00
Memory at b0000000 (32-bit, prefetchable) [size=256M]
Memory at f0000000 (32-bit, non-prefetchable) [size=256K]
I/O ports at e000 [size=128]
[virtual] Expansion ROM at 20000000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Kernel modules: sisfb
00:0b.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder (rev 01)
Flags: bus master, medium devsel, latency 128, IRQ 11
Memory at f0200000 (32-bit, non-prefetchable) [size=1M]
Kernel driver in use: Sigma Designs EM8300
Kernel modules: em8300
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 22, IRQ 11
I/O ports at 1200 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 22, IRQ 7
I/O ports at 1220 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 22, IRQ 10
I/O ports at 1240 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Flags: bus master, medium devsel, latency 22, IRQ 10
Memory at 20010000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
Kernel modules: via-ircc, i2c-viapro
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Flags: bus master, medium devsel, latency 64, IRQ 11
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at 1100 [size=16]
Capabilities: [c0] Power Management version 2
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
Subsystem: VIA Technologies, Inc. Soyo KT-600 Dragon Plus (Realtek ALC 650)
Flags: medium devsel, IRQ 10
I/O ports at e100 [size=256]
Capabilities: [c0] Power Management version 2
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
Subsystem: VIA Technologies, Inc. Device 0105
Flags: bus master, medium devsel, latency 128, IRQ 11
I/O ports at e200 [size=256]
Memory at f0300000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Kernel driver in use: via-rhine
Kernel modules: via-rhine
================================================
powered by Transmeta Crusoe T5800 CPU:
==============================
processor : 0
vendor_id : GenuineTMx86
cpu family : 5
model : 4
model name : Transmeta(tm) Crusoe(tm) Processor TM5800
stepping : 3
cpu MHz : 1000.072
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr cx8 sep cmov mmx longrun lrti constant_tsc
bogomips : 2028.49
clflush size : 32
power management:
===================
Here is the snippet from dmesg:
============================================
29.282713] i2c-core: driver [eeprom] registered
[ 29.282755] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x50
[ 29.282821] i2c-adapter i2c-0: Transaction (pre): STS=42 CNT=14 CMD=00 ADD=a0 DAT=06,00
[ 29.282839] i2c-adapter i2c-0: SMBus busy (0x42). Resetting...
[ 29.288266] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a0 DAT=06,00
[ 29.288301] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x51
[ 29.288361] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a2 DAT=06,00
[ 29.296235] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a2 DAT=06,00
[ 29.296302] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a2 DAT=06,00
[ 29.304266] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a2 DAT=06,00
[ 29.304449] i2c-adapter i2c-0: client [eeprom] registered with bus id 0-0051
[ 29.304477] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x52
[ 29.304540] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a4 DAT=06,00
[ 29.312243] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a4 DAT=06,00
[ 29.312279] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x53
[ 29.312583] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a6 DAT=06,00
[ 29.320223] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a6 DAT=06,00
[ 29.320257] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x54
[ 29.320321] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a8 DAT=06,00
[ 29.328188] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a8 DAT=06,00
[ 29.328222] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x55
[ 29.328288] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=aa DAT=06,00
[ 29.336361] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=aa DAT=06,00
[ 29.336387] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x56
[ 29.337121] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=ac DAT=06,00
[ 29.344178] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=ac DAT=06,00
[ 29.344208] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x57
[ 29.344270] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=ae DAT=06,00
[ 29.352137] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=ae DAT=06,00
[ 29.461092] i2c-core: driver [adv717x] registered
[ 29.461187] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=01 ADD=d4 DAT=55,00
[ 29.468203] i2c-adapter i2c-0: Transaction error!
[ 29.475508] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=08 CMD=01 ADD=d4 DAT=55,00
[ 29.475570] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=08 CMD=01 ADD=d5 DAT=55,00
[ 29.483482] i2c-adapter i2c-0: Transaction error!
[ 29.487175] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=08 CMD=01 ADD=d5 DAT=55,00
[ 29.487249] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=08 CMD=01 ADD=f4 DAT=55,00
[ 29.495159] i2c-adapter i2c-0: Transaction error!
[ 29.500150] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=08 CMD=01 ADD=f4 DAT=55,00
[ 29.500210] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=08 CMD=01 ADD=f5 DAT=55,00
[ 29.506943] i2c-adapter i2c-0: Transaction error!
[ 29.512142] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=08 CMD=01 ADD=f5 DAT=55,00
[ 29.512224] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=08 CMD=01 ADD=14 DAT=55,00
[ 29.519715] i2c-adapter i2c-0: Transaction error!
[ 29.524080] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=08 CMD=01 ADD=14 DAT=55,00
[ 29.524531] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=08 CMD=01 ADD=15 DAT=55,00
[ 29.530902] i2c-adapter i2c-0: Transaction error!
[ 29.536117] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=08 CMD=01 ADD=15 DAT=55,00
[ 29.576032] em8300: audio_driver: deprecated module parameter: all audio interfaces are now enabled
[ 29.583730] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 29.590423] em8300-0: EM8300 8300 (rev 1) <6>bus: 0, devfn: 88, irq: 11, <6>memory: 0xf0200000.
[ 29.596800] em8300-0: mapped-memory at 0xdfd80000
[ 29.603346] em8300-0: using MTRR
[ 29.610178] i2c-adapter i2c-1: adapter [EM8300 I2C bus 2] registered
[ 29.610220] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x50
[ 29.610462] i2c-adapter i2c-1: master_xfer[0] W, addr=0x50, len=0
[ 29.616054] i2c-adapter i2c-1: NAK from device addr 0x50 msg #0
[ 29.616054] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x51
[ 29.616054] i2c-adapter i2c-1: master_xfer[0] W, addr=0x51, len=0
[ 29.617173] i2c-adapter i2c-1: NAK from device addr 0x51 msg #0
[ 29.617217] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x52
[ 29.617238] i2c-adapter i2c-1: master_xfer[0] W, addr=0x52, len=0
[ 29.622005] i2c-adapter i2c-1: NAK from device addr 0x52 msg #0
[ 29.622071] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x53
[ 29.622105] i2c-adapter i2c-1: master_xfer[0] W, addr=0x53, len=0
[ 29.626270] i2c-adapter i2c-1: NAK from device addr 0x53 msg #0
[ 29.626331] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x54
[ 29.626362] i2c-adapter i2c-1: master_xfer[0] W, addr=0x54, len=0
[ 29.630052] i2c-adapter i2c-1: NAK from device addr 0x54 msg #0
[ 29.630114] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x55
[ 29.630149] i2c-adapter i2c-1: master_xfer[0] W, addr=0x55, len=0
[ 29.631155] i2c-adapter i2c-1: NAK from device addr 0x55 msg #0
[ 29.631196] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x56
[ 29.631470] i2c-adapter i2c-1: master_xfer[0] W, addr=0x56, len=0
[ 29.633163] i2c-adapter i2c-1: NAK from device addr 0x56 msg #0
[ 29.633218] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x57
[ 29.633245] i2c-adapter i2c-1: master_xfer[0] W, addr=0x57, len=0
[ 29.634233] i2c-adapter i2c-1: NAK from device addr 0x57 msg #0
[ 29.634297] i2c-adapter i2c-1: master_xfer[0] W, addr=0x6a, len=2
[ 29.635279] i2c-adapter i2c-1: NAK from device addr 0x6a msg #0
[ 29.635323] i2c-adapter i2c-1: master_xfer[0] W, addr=0x6a, len=1
[ 29.635332] i2c-adapter i2c-1: master_xfer[1] R, addr=0x6a, len=1
[ 29.636327] i2c-adapter i2c-1: NAK from device addr 0x6a msg #0
[ 29.636381] i2c-adapter i2c-1: master_xfer[0] W, addr=0x7a, len=2
[ 29.637478] i2c-adapter i2c-1: NAK from device addr 0x7a msg #0
[ 29.637524] i2c-adapter i2c-1: master_xfer[0] W, addr=0x7a, len=1
[ 29.637535] i2c-adapter i2c-1: master_xfer[1] R, addr=0x7a, len=1
[ 29.638516] i2c-adapter i2c-1: NAK from device addr 0x7a msg #0
[ 29.638916] i2c-adapter i2c-1: master_xfer[0] W, addr=0x0a, len=2
[ 29.639989] i2c-adapter i2c-1: NAK from device addr 0x0a msg #0
[ 29.640033] i2c-adapter i2c-1: master_xfer[0] W, addr=0x0a, len=1
[ 29.640033] i2c-adapter i2c-1: master_xfer[1] R, addr=0x0a, len=1
[ 29.641214] i2c-adapter i2c-1: NAK from device addr 0x0a msg #0
[ 29.641504] i2c-adapter i2c-1: master_xfer[0] W, addr=0x50, len=1
[ 29.641514] i2c-adapter i2c-1: master_xfer[1] R, addr=0x50, len=256
[ 29.643388] i2c-adapter i2c-1: NAK from device addr 0x50 msg #0
[ 29.643709] i2c-adapter i2c-1: master_xfer[0] W, addr=0x50, len=1
[ 29.643718] i2c-adapter i2c-1: master_xfer[1] R, addr=0x50, len=256
[ 29.644808] i2c-adapter i2c-1: NAK from device addr 0x50 msg #0
[ 29.644848] em8300-0: unable to identify model...
[ 29.651294] em8300-0: Chip revision: 1
[ 29.659398] i2c-adapter i2c-2: adapter [EM8300 I2C bus 1] registered
[ 29.659442] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x50
[ 29.659467] i2c-adapter i2c-2: master_xfer[0] W, addr=0x50, len=0
[ 29.664045] i2c-adapter i2c-2: NAK from device addr 0x50 msg #0
[ 29.664045] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x51
[ 29.664045] i2c-adapter i2c-2: master_xfer[0] W, addr=0x51, len=0
[ 29.664045] i2c-adapter i2c-2: NAK from device addr 0x51 msg #0
[ 29.664175] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x52
[ 29.664194] i2c-adapter i2c-2: master_xfer[0] W, addr=0x52, len=0
[ 29.665175] i2c-adapter i2c-2: NAK from device addr 0x52 msg #0
[ 29.665213] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x53
[ 29.665225] i2c-adapter i2c-2: master_xfer[0] W, addr=0x53, len=0
[ 29.666200] i2c-adapter i2c-2: NAK from device addr 0x53 msg #0
[ 29.666237] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x54
[ 29.666249] i2c-adapter i2c-2: master_xfer[0] W, addr=0x54, len=0
[ 29.667756] i2c-adapter i2c-2: NAK from device addr 0x54 msg #0
[ 29.667807] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x55
[ 29.667830] i2c-adapter i2c-2: master_xfer[0] W, addr=0x55, len=0
[ 29.668863] i2c-adapter i2c-2: NAK from device addr 0x55 msg #0
[ 29.669225] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x56
[ 29.669662] i2c-adapter i2c-2: master_xfer[0] W, addr=0x56, len=0
[ 29.670646] i2c-adapter i2c-2: NAK from device addr 0x56 msg #0
[ 29.670880] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x57
[ 29.671060] i2c-adapter i2c-2: master_xfer[0] W, addr=0x57, len=0
[ 29.672038] i2c-adapter i2c-2: NAK from device addr 0x57 msg #0
[ 29.672148] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.672813] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=1
[ 29.672821] i2c-adapter i2c-2: master_xfer[1] R, addr=0x6a, len=1
[ 29.673748] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=1
[ 29.673755] i2c-adapter i2c-2: master_xfer[1] R, addr=0x6a, len=1
[ 29.675202] adv717x.o: ADV7175A chip detected
[ 29.681840] i2c-adapter i2c-2: client [ADV7175A chip] registered with bus id 2-006a
[ 29.681888] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.682550] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.683202] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.683852] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.686056] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.686962] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.687842] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.688029] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.688029] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.688720] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.689497] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.690144] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.690905] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.691552] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.692346] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.693032] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.693677] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.694319] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.694961] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.695604] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.696465] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.697110] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.698170] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.698817] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.699458] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.700098] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.700763] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.701404] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.702044] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.702684] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.703324] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.703964] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.704626] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.705267] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.705966] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.706607] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.707247] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.707887] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.708549] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.709190] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.709830] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.710471] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.711112] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.711753] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.712420] i2c-adapter i2c-2: master_xfer[0] W, addr=0x7a, len=2
[ 29.713399] i2c-adapter i2c-2: NAK from device addr 0x7a msg #0
[ 29.713438] i2c-adapter i2c-2: master_xfer[0] W, addr=0x7a, len=1
[ 29.713446] i2c-adapter i2c-2: master_xfer[1] R, addr=0x7a, len=1
[ 29.714416] i2c-adapter i2c-2: NAK from device addr 0x7a msg #0
[ 29.714459] i2c-adapter i2c-2: master_xfer[0] W, addr=0x0a, len=2
[ 29.715428] i2c-adapter i2c-2: NAK from device addr 0x0a msg #0
[ 29.715465] i2c-adapter i2c-2: master_xfer[0] W, addr=0x0a, len=1
[ 29.715472] i2c-adapter i2c-2: master_xfer[1] R, addr=0x0a, len=1
[ 29.716549] i2c-adapter i2c-2: NAK from device addr 0x0a msg #0
[ 29.717910] unable to register OSS PCM device 1:0
==================================================
Output from dxr3config:
==================
This is dxr3config 0.3.4
Checking your dxr3 hard- and software.........
loading module adv717x [ OK ]
loading module bt865 [ OK ]
loading module em8300 [ OK ]
detecting dxr3-hardware [ OK ]
dxr3 hardware revision [ 01 ]
detecting adv717x/bt865 [ adv717x ]
Error: No dxr3-EEprom found [ FAILED ]
Error: dxr3config could not determine the dxr3 module parameters.
This can have different reasons.
In most cases you can read the reason above.
Card revision: [ 1 ]
Chip revision: [ 1 ]
Video Encoder: [ ADV7175 ]
Module Version: [ hg-d8617452cd52+ ]
looking for em8300setup [ /usr/local/bin/em8300setup ]
FATAL: Module em8300 is in use.
FATAL: Error running remove command for em8300
.
.
.
looking for Microcode [ OK ]
detecting device /dev/em8300-0 [ OK ]
detecting device /dev/em8300_mv-0 [ OK ]
detecting device /dev/em8300_ma-0 [ OK ]
detecting device /dev/em8300_sp-0 [ OK ]
detecting device /dev/em8300_ma-0 [ OK ]
trying to remove the modules...
^CGood bye...
Good bye...
=============================
Below is the contents of /etc/modprobe.d/em8300 file (borrowed this one from Ubuntu forum)
=========================
install em8300 /sbin/modprobe adv717x && /sbin/modprobe --ignore-install em8300
remove em8300 /sbin/modprobe -r --ignore-remove em8300 && /sbin/modprobe -r adv717x
# my options
options adv717x output_mode=svideo pixelport_16bit=1 pixelport_other_pal=0 pixeldata_adjust_ntsc=3
options em8300 major=0 use_bt865=0 dicom_other_pal=0 dicom_fix=0 dicom_control=0 bt865_ucode_timeout=0 audio_driver=osslike
==================
NTSC video out works perfect.
For the record, I was unable to hear any meaningful analog audio from the card in question under freshly-installed Windows XP, either. Just noise. I have no way to veryfy that digital audio works or does not.
Using Debian testing, pretty much stock kernel configuration, kernel 2.6.26.
Note that CPU does not support mtrr - does it matter?
Am I missing something in the setup?
Thanks in advance!
Not totally sure if the devel forum is the best place to post this as I am certainly not a em8300 developer.
No matter what I trying to do, I am unable to make the analog audio work on my H+ card. Only getting noise.
Been using Linux for a few years now, but consider myself a 'perpetual newbie'
My computer is a thin client Teco TR5670, 512 MB RAM, 1GHz Crusoe CPU, 18 GB hd.
=================================
00:00.0 Host bridge: Transmeta Corporation LongRun Northbridge (rev 03)
Subsystem: Transmeta Corporation Device 0295
Flags: bus master, medium devsel, latency 8
Memory at f0100000 (32-bit, non-prefetchable) [size=1M]
Kernel modules: efficeon-agp
00:00.1 RAM memory: Transmeta Corporation SDRAM controller
Subsystem: Transmeta Corporation Device 0295
Flags: fast devsel
00:00.2 RAM memory: Transmeta Corporation BIOS scratchpad
Subsystem: Transmeta Corporation Device 0295
Flags: fast devsel
00:09.0 VGA compatible controller: Silicon Integrated Systems [SiS] 315PRO PCI/AGP VGA Display Adapter (prog-if 00 [VGA controller])
Flags: bus master, 66MHz, medium devsel, latency 71
BIST result: 00
Memory at b0000000 (32-bit, prefetchable) [size=256M]
Memory at f0000000 (32-bit, non-prefetchable) [size=256K]
I/O ports at e000 [size=128]
[virtual] Expansion ROM at 20000000 [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Kernel modules: sisfb
00:0b.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder (rev 01)
Flags: bus master, medium devsel, latency 128, IRQ 11
Memory at f0200000 (32-bit, non-prefetchable) [size=1M]
Kernel driver in use: Sigma Designs EM8300
Kernel modules: em8300
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 22, IRQ 11
I/O ports at 1200 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 22, IRQ 7
I/O ports at 1220 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 22, IRQ 10
I/O ports at 1240 [size=32]
Capabilities: [80] Power Management version 2
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Flags: bus master, medium devsel, latency 22, IRQ 10
Memory at 20010000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
Kernel modules: via-ircc, i2c-viapro
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Flags: bus master, medium devsel, latency 64, IRQ 11
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at 1100 [size=16]
Capabilities: [c0] Power Management version 2
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
Subsystem: VIA Technologies, Inc. Soyo KT-600 Dragon Plus (Realtek ALC 650)
Flags: medium devsel, IRQ 10
I/O ports at e100 [size=256]
Capabilities: [c0] Power Management version 2
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
Subsystem: VIA Technologies, Inc. Device 0105
Flags: bus master, medium devsel, latency 128, IRQ 11
I/O ports at e200 [size=256]
Memory at f0300000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Kernel driver in use: via-rhine
Kernel modules: via-rhine
================================================
powered by Transmeta Crusoe T5800 CPU:
==============================
processor : 0
vendor_id : GenuineTMx86
cpu family : 5
model : 4
model name : Transmeta(tm) Crusoe(tm) Processor TM5800
stepping : 3
cpu MHz : 1000.072
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr cx8 sep cmov mmx longrun lrti constant_tsc
bogomips : 2028.49
clflush size : 32
power management:
===================
Here is the snippet from dmesg:
============================================
29.282713] i2c-core: driver [eeprom] registered
[ 29.282755] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x50
[ 29.282821] i2c-adapter i2c-0: Transaction (pre): STS=42 CNT=14 CMD=00 ADD=a0 DAT=06,00
[ 29.282839] i2c-adapter i2c-0: SMBus busy (0x42). Resetting...
[ 29.288266] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a0 DAT=06,00
[ 29.288301] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x51
[ 29.288361] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a2 DAT=06,00
[ 29.296235] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a2 DAT=06,00
[ 29.296302] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a2 DAT=06,00
[ 29.304266] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a2 DAT=06,00
[ 29.304449] i2c-adapter i2c-0: client [eeprom] registered with bus id 0-0051
[ 29.304477] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x52
[ 29.304540] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a4 DAT=06,00
[ 29.312243] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a4 DAT=06,00
[ 29.312279] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x53
[ 29.312583] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a6 DAT=06,00
[ 29.320223] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a6 DAT=06,00
[ 29.320257] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x54
[ 29.320321] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=a8 DAT=06,00
[ 29.328188] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=a8 DAT=06,00
[ 29.328222] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x55
[ 29.328288] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=aa DAT=06,00
[ 29.336361] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=aa DAT=06,00
[ 29.336387] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x56
[ 29.337121] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=ac DAT=06,00
[ 29.344178] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=ac DAT=06,00
[ 29.344208] i2c-adapter i2c-0: found normal entry for adapter 0, addr 0x57
[ 29.344270] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=00 ADD=ae DAT=06,00
[ 29.352137] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=00 CMD=00 ADD=ae DAT=06,00
[ 29.461092] i2c-core: driver [adv717x] registered
[ 29.461187] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=00 CMD=01 ADD=d4 DAT=55,00
[ 29.468203] i2c-adapter i2c-0: Transaction error!
[ 29.475508] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=08 CMD=01 ADD=d4 DAT=55,00
[ 29.475570] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=08 CMD=01 ADD=d5 DAT=55,00
[ 29.483482] i2c-adapter i2c-0: Transaction error!
[ 29.487175] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=08 CMD=01 ADD=d5 DAT=55,00
[ 29.487249] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=08 CMD=01 ADD=f4 DAT=55,00
[ 29.495159] i2c-adapter i2c-0: Transaction error!
[ 29.500150] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=08 CMD=01 ADD=f4 DAT=55,00
[ 29.500210] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=08 CMD=01 ADD=f5 DAT=55,00
[ 29.506943] i2c-adapter i2c-0: Transaction error!
[ 29.512142] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=08 CMD=01 ADD=f5 DAT=55,00
[ 29.512224] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=08 CMD=01 ADD=14 DAT=55,00
[ 29.519715] i2c-adapter i2c-0: Transaction error!
[ 29.524080] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=08 CMD=01 ADD=14 DAT=55,00
[ 29.524531] i2c-adapter i2c-0: Transaction (pre): STS=40 CNT=08 CMD=01 ADD=15 DAT=55,00
[ 29.530902] i2c-adapter i2c-0: Transaction error!
[ 29.536117] i2c-adapter i2c-0: Transaction (post): STS=00 CNT=08 CMD=01 ADD=15 DAT=55,00
[ 29.576032] em8300: audio_driver: deprecated module parameter: all audio interfaces are now enabled
[ 29.583730] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 29.590423] em8300-0: EM8300 8300 (rev 1) <6>bus: 0, devfn: 88, irq: 11, <6>memory: 0xf0200000.
[ 29.596800] em8300-0: mapped-memory at 0xdfd80000
[ 29.603346] em8300-0: using MTRR
[ 29.610178] i2c-adapter i2c-1: adapter [EM8300 I2C bus 2] registered
[ 29.610220] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x50
[ 29.610462] i2c-adapter i2c-1: master_xfer[0] W, addr=0x50, len=0
[ 29.616054] i2c-adapter i2c-1: NAK from device addr 0x50 msg #0
[ 29.616054] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x51
[ 29.616054] i2c-adapter i2c-1: master_xfer[0] W, addr=0x51, len=0
[ 29.617173] i2c-adapter i2c-1: NAK from device addr 0x51 msg #0
[ 29.617217] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x52
[ 29.617238] i2c-adapter i2c-1: master_xfer[0] W, addr=0x52, len=0
[ 29.622005] i2c-adapter i2c-1: NAK from device addr 0x52 msg #0
[ 29.622071] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x53
[ 29.622105] i2c-adapter i2c-1: master_xfer[0] W, addr=0x53, len=0
[ 29.626270] i2c-adapter i2c-1: NAK from device addr 0x53 msg #0
[ 29.626331] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x54
[ 29.626362] i2c-adapter i2c-1: master_xfer[0] W, addr=0x54, len=0
[ 29.630052] i2c-adapter i2c-1: NAK from device addr 0x54 msg #0
[ 29.630114] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x55
[ 29.630149] i2c-adapter i2c-1: master_xfer[0] W, addr=0x55, len=0
[ 29.631155] i2c-adapter i2c-1: NAK from device addr 0x55 msg #0
[ 29.631196] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x56
[ 29.631470] i2c-adapter i2c-1: master_xfer[0] W, addr=0x56, len=0
[ 29.633163] i2c-adapter i2c-1: NAK from device addr 0x56 msg #0
[ 29.633218] i2c-adapter i2c-1: found normal entry for adapter 1, addr 0x57
[ 29.633245] i2c-adapter i2c-1: master_xfer[0] W, addr=0x57, len=0
[ 29.634233] i2c-adapter i2c-1: NAK from device addr 0x57 msg #0
[ 29.634297] i2c-adapter i2c-1: master_xfer[0] W, addr=0x6a, len=2
[ 29.635279] i2c-adapter i2c-1: NAK from device addr 0x6a msg #0
[ 29.635323] i2c-adapter i2c-1: master_xfer[0] W, addr=0x6a, len=1
[ 29.635332] i2c-adapter i2c-1: master_xfer[1] R, addr=0x6a, len=1
[ 29.636327] i2c-adapter i2c-1: NAK from device addr 0x6a msg #0
[ 29.636381] i2c-adapter i2c-1: master_xfer[0] W, addr=0x7a, len=2
[ 29.637478] i2c-adapter i2c-1: NAK from device addr 0x7a msg #0
[ 29.637524] i2c-adapter i2c-1: master_xfer[0] W, addr=0x7a, len=1
[ 29.637535] i2c-adapter i2c-1: master_xfer[1] R, addr=0x7a, len=1
[ 29.638516] i2c-adapter i2c-1: NAK from device addr 0x7a msg #0
[ 29.638916] i2c-adapter i2c-1: master_xfer[0] W, addr=0x0a, len=2
[ 29.639989] i2c-adapter i2c-1: NAK from device addr 0x0a msg #0
[ 29.640033] i2c-adapter i2c-1: master_xfer[0] W, addr=0x0a, len=1
[ 29.640033] i2c-adapter i2c-1: master_xfer[1] R, addr=0x0a, len=1
[ 29.641214] i2c-adapter i2c-1: NAK from device addr 0x0a msg #0
[ 29.641504] i2c-adapter i2c-1: master_xfer[0] W, addr=0x50, len=1
[ 29.641514] i2c-adapter i2c-1: master_xfer[1] R, addr=0x50, len=256
[ 29.643388] i2c-adapter i2c-1: NAK from device addr 0x50 msg #0
[ 29.643709] i2c-adapter i2c-1: master_xfer[0] W, addr=0x50, len=1
[ 29.643718] i2c-adapter i2c-1: master_xfer[1] R, addr=0x50, len=256
[ 29.644808] i2c-adapter i2c-1: NAK from device addr 0x50 msg #0
[ 29.644848] em8300-0: unable to identify model...
[ 29.651294] em8300-0: Chip revision: 1
[ 29.659398] i2c-adapter i2c-2: adapter [EM8300 I2C bus 1] registered
[ 29.659442] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x50
[ 29.659467] i2c-adapter i2c-2: master_xfer[0] W, addr=0x50, len=0
[ 29.664045] i2c-adapter i2c-2: NAK from device addr 0x50 msg #0
[ 29.664045] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x51
[ 29.664045] i2c-adapter i2c-2: master_xfer[0] W, addr=0x51, len=0
[ 29.664045] i2c-adapter i2c-2: NAK from device addr 0x51 msg #0
[ 29.664175] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x52
[ 29.664194] i2c-adapter i2c-2: master_xfer[0] W, addr=0x52, len=0
[ 29.665175] i2c-adapter i2c-2: NAK from device addr 0x52 msg #0
[ 29.665213] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x53
[ 29.665225] i2c-adapter i2c-2: master_xfer[0] W, addr=0x53, len=0
[ 29.666200] i2c-adapter i2c-2: NAK from device addr 0x53 msg #0
[ 29.666237] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x54
[ 29.666249] i2c-adapter i2c-2: master_xfer[0] W, addr=0x54, len=0
[ 29.667756] i2c-adapter i2c-2: NAK from device addr 0x54 msg #0
[ 29.667807] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x55
[ 29.667830] i2c-adapter i2c-2: master_xfer[0] W, addr=0x55, len=0
[ 29.668863] i2c-adapter i2c-2: NAK from device addr 0x55 msg #0
[ 29.669225] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x56
[ 29.669662] i2c-adapter i2c-2: master_xfer[0] W, addr=0x56, len=0
[ 29.670646] i2c-adapter i2c-2: NAK from device addr 0x56 msg #0
[ 29.670880] i2c-adapter i2c-2: found normal entry for adapter 2, addr 0x57
[ 29.671060] i2c-adapter i2c-2: master_xfer[0] W, addr=0x57, len=0
[ 29.672038] i2c-adapter i2c-2: NAK from device addr 0x57 msg #0
[ 29.672148] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.672813] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=1
[ 29.672821] i2c-adapter i2c-2: master_xfer[1] R, addr=0x6a, len=1
[ 29.673748] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=1
[ 29.673755] i2c-adapter i2c-2: master_xfer[1] R, addr=0x6a, len=1
[ 29.675202] adv717x.o: ADV7175A chip detected
[ 29.681840] i2c-adapter i2c-2: client [ADV7175A chip] registered with bus id 2-006a
[ 29.681888] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.682550] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.683202] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.683852] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.686056] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.686962] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.687842] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.688029] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.688029] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.688720] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.689497] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.690144] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.690905] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.691552] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.692346] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.693032] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.693677] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.694319] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.694961] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.695604] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.696465] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.697110] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.698170] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.698817] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.699458] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.700098] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.700763] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.701404] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.702044] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.702684] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.703324] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.703964] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.704626] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.705267] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.705966] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.706607] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.707247] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.707887] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.708549] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.709190] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.709830] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.710471] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.711112] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.711753] i2c-adapter i2c-2: master_xfer[0] W, addr=0x6a, len=2
[ 29.712420] i2c-adapter i2c-2: master_xfer[0] W, addr=0x7a, len=2
[ 29.713399] i2c-adapter i2c-2: NAK from device addr 0x7a msg #0
[ 29.713438] i2c-adapter i2c-2: master_xfer[0] W, addr=0x7a, len=1
[ 29.713446] i2c-adapter i2c-2: master_xfer[1] R, addr=0x7a, len=1
[ 29.714416] i2c-adapter i2c-2: NAK from device addr 0x7a msg #0
[ 29.714459] i2c-adapter i2c-2: master_xfer[0] W, addr=0x0a, len=2
[ 29.715428] i2c-adapter i2c-2: NAK from device addr 0x0a msg #0
[ 29.715465] i2c-adapter i2c-2: master_xfer[0] W, addr=0x0a, len=1
[ 29.715472] i2c-adapter i2c-2: master_xfer[1] R, addr=0x0a, len=1
[ 29.716549] i2c-adapter i2c-2: NAK from device addr 0x0a msg #0
[ 29.717910] unable to register OSS PCM device 1:0
==================================================
Output from dxr3config:
==================
This is dxr3config 0.3.4
Checking your dxr3 hard- and software.........
loading module adv717x [ OK ]
loading module bt865 [ OK ]
loading module em8300 [ OK ]
detecting dxr3-hardware [ OK ]
dxr3 hardware revision [ 01 ]
detecting adv717x/bt865 [ adv717x ]
Error: No dxr3-EEprom found [ FAILED ]
Error: dxr3config could not determine the dxr3 module parameters.
This can have different reasons.
In most cases you can read the reason above.
Card revision: [ 1 ]
Chip revision: [ 1 ]
Video Encoder: [ ADV7175 ]
Module Version: [ hg-d8617452cd52+ ]
looking for em8300setup [ /usr/local/bin/em8300setup ]
FATAL: Module em8300 is in use.
FATAL: Error running remove command for em8300
.
.
.
looking for Microcode [ OK ]
detecting device /dev/em8300-0 [ OK ]
detecting device /dev/em8300_mv-0 [ OK ]
detecting device /dev/em8300_ma-0 [ OK ]
detecting device /dev/em8300_sp-0 [ OK ]
detecting device /dev/em8300_ma-0 [ OK ]
trying to remove the modules...
^CGood bye...
Good bye...
=============================
Below is the contents of /etc/modprobe.d/em8300 file (borrowed this one from Ubuntu forum)
=========================
install em8300 /sbin/modprobe adv717x && /sbin/modprobe --ignore-install em8300
remove em8300 /sbin/modprobe -r --ignore-remove em8300 && /sbin/modprobe -r adv717x
# my options
options adv717x output_mode=svideo pixelport_16bit=1 pixelport_other_pal=0 pixeldata_adjust_ntsc=3
options em8300 major=0 use_bt865=0 dicom_other_pal=0 dicom_fix=0 dicom_control=0 bt865_ucode_timeout=0 audio_driver=osslike
==================
NTSC video out works perfect.
For the record, I was unable to hear any meaningful analog audio from the card in question under freshly-installed Windows XP, either. Just noise. I have no way to veryfy that digital audio works or does not.
Using Debian testing, pretty much stock kernel configuration, kernel 2.6.26.
Note that CPU does not support mtrr - does it matter?
Am I missing something in the setup?
Thanks in advance!
« Return to Thread: em8300 - no audio output
| Free embeddable forum powered by Nabble | Forum Help |
