Nabble - freebsd-multimedia

Re: FYI: v4l-linuxulator support in FreeBSD-current now

2009-12-05T11:09:27Z

On Fri, 4 Dec 2009 22:31:26 +0100, Alexander Leidinger <Alexander@...> wrote:

>
> Hi,
>
> in case someone wants to use skype (or flash) with his webcam: it is
> possible now in -current (works at least with multimedia/pwcbsd).
>
> No MFC planned yet. The more you test, the more likely it will be that
> it will be MFCed sooner than later.
>
> Bye,
> Alexander.

Thanks for committing this, Alexander.

A couple of notes.

1. This code does work on 8.0 and 7.2. If you are interested in
testing on those systems, you can fetch the files at the URL
below.

2. The version committed does not contain support for a video
clip list (in the VIDIOCSWIN ioctl). This is not a problem
for the Linux skype port or browser-based flash camera apps
since these do not use video clipping.

I have added video clip list support in the version on my
site, below, however there are some caveats which are
documented on the web page. If you are familiar with the use
of a V4L video clip list, please take a look at the URL below
and send feedback.

The latest version is at:
http://opal.com/freebsd/sys/compat/linux/

My testing is with a pwc(4) based webcam (in the multimedia/pwc
port). This driver has V4L support. If you test with any other
driver, please do send feedback.

-jr
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: snd_uaudio and recording

2009-12-05T02:47:39Z

On Friday 04 December 2009 18:21:22 Baldur Gislason wrote:
> What is the status of recording capabilities with the uaudio driver?
> Is there such a capability at all yet? Man page says squat about it.
>

Recording, Playback and MIDI is supported for USB audio devices.

--HPS

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: snd_envy24ht regression in 8.0 (patch included)

2009-12-05T02:04:05Z

On Saturday 05 December 2009 01:00:54 Carl Johan Gustavsson wrote:
> Yamagi Burmeister wrote:
> > Hello,
> > I've got a Audiotrak Prodigy HD2 soundcard, based upon the VIA
> > Envy24HT-s chipset. Dmesg output is:
...

> >
> > In FreeBSD 7.2 it worked just like a charm but after upgrading to 8.0
> > the left stereo channel is only half as loud as the right one. It can be
> > reproduced with either speakers and headphones. I tracked it down to a
> > change in revision 188480 of spicds.c, the change "fix: stupid bug with
> > volume control for AK4396" breaks volume control for me. The attached
> > patch fixes the problem by reverting the specific change but I guess
> > it'll break some other cards again.
> >
> > An other possible work around is to double the volume of the left
> > channel via the mixer.
> Hi,
>
> That patch was partly correct but it did only fix the problem on the right
> channel, the left one exhibits a similar error. Logical operators in case
> labels does not work well in C, or at least not as the original writer
> expected :)
>
> Please revert your changes and try the attached patch.

The patch fixes the balance problems on my envy24 card that had similar
problems.

--
Stefan
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: snd_envy24ht regression in 8.0 (patch included)

2009-12-04T16:00:54Z

Yamagi Burmeister wrote:

> Hello,
> I've got a Audiotrak Prodigy HD2 soundcard, based upon the VIA
> Envy24HT-s chipset. Dmesg output is:
>
> pcm1: <Envy24HT audio (AudioTrak Prodigy HD2)> port
> 0x3080-0x309f,0x3000-0x307f irq 28 at device 4.0 on pci18
> pcm1: [GIANT-LOCKED]
> pcm1: [ITHREAD]
> pcm1: system configuration
> SubVendorID: 0x3137, SubDeviceID: 0x4154
> XIN2 Clock Source: 49.152MHz(192kHz*256)
> MPU-401 UART(s) #: 1
> ADC #: 1 and SPDIF receiver connected
> DAC #: 1
> Multi-track converter type: I2S(192KHz support, 24bit resolution,
> ID#0x0)
> S/PDIF(IN/OUT): 1/1 ID# 0x00
> GPIO(mask/dir/state): 0xfff8ff/0xdfffff/0x200700
>
> /dev/sndstat shows:
>
> root@screw:pts/8 ~> cat /dev/sndstat
> FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64)
> Installed devices:
> pcm0: <nVidia nForce4> at io 0x1800, 0x1400 irq 22 bufsz 16384 kld
> snd_ich [MPSAFE] (1p:1v/1r:1v channels duplex)
> pcm1: <Envy24HT audio (AudioTrak Prodigy HD2)> at io
> 0x3080:32,0x3000:128 irq 28 [GIANT] (1p:1v/5r:1v channels duplex
> default)
>
> In FreeBSD 7.2 it worked just like a charm but after upgrading to 8.0
> the left stereo channel is only half as loud as the right one. It can be
> reproduced with either speakers and headphones. I tracked it down to a
> change in revision 188480 of spicds.c, the change "fix: stupid bug with
> volume control for AK4396" breaks volume control for me. The attached
> patch fixes the problem by reverting the specific change but I guess
> it'll break some other cards again.
>
> An other possible work around is to double the volume of the left
> channel via the mixer.
>
> Ciao,
> Yamagi
>

Hi,

That patch was partly correct but it did only fix the problem on the right
channel, the left one exhibits a similar error. Logical operators in case
labels does not work well in C, or at least not as the original writer
expected :)

Please revert your changes and try the attached patch.

-cjg

Index: spicds.c
===================================================================
--- spicds.c (revision 200112)
+++ spicds.c (working copy)
@@ -283,7 +283,8 @@
case SPICDS_TYPE_WM8770:
left = left + 27;
break;
- case SPICDS_TYPE_AK4381 || SPICDS_TYPE_AK4396:
+ case SPICDS_TYPE_AK4381:
+ case SPICDS_TYPE_AK4396:
left = left * 255 / 100;
break;
default:

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

FYI: v4l-linuxulator support in FreeBSD-current now

2009-12-04T13:31:26Z

Hi,

in case someone wants to use skype (or flash) with his webcam: it is
possible now in -current (works at least with multimedia/pwcbsd).

No MFC planned yet. The more you test, the more likely it will be that
it will be MFCed sooner than later.

Bye,
Alexander.
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

snd_uaudio and recording

2009-12-04T09:21:22Z

What is the status of recording capabilities with the uaudio driver?
Is there such a capability at all yet? Man page says squat about it.

Baldur
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

עלון מידע

2009-12-04T01:02:09Z

New Page 6

עלון מידע <http://www.dwh.co.il>

דצמבר 2009

חדש בפורומים
*

פורום
baba-bo Business Objects
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1363.0>
*

prompt
webi xi3
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1371.0>

שאלת אקסלסיוס
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1372.0>

BI וספורט
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1363.0>

דרישות להתקנת שרת BOXI 3.1
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1370.0>

תזמון להדפסה
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1352.0>

*פורום Qlikview*
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/board,15.0>

Export Data - שאלה
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1373.0>

Input Field
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1369.0>

מה QV אינו יכול לעשות?
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1366.0>

שאלה קטנה בנוגע ל Set Analysis
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1364.0>

איש ה QV מחפש שם
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1358.0>

פורום קוגנוס
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/board,10.0>

ריפרוש אוטמטי של דוח
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1343.0>

קישור ל - PDF מדוח ב-DRILL
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1283.0>

מיון דינמי
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1272.0>

Install Dashboard
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1258.0>

drill through
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1260.0>

הגדרת סדר ריצת Queries/SP
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1243.0>

*

הפורום של אלדד הרץ
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/board,7.0>
*

איך מחלצים קוביה מה PowerPivot
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1368.0>

איך עושים מה ב-SSIS
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1362.0>

Analysis Services 2008 Metadata Report Pack
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1367.0>

MDX
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1354.0>

טבלת FACT
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1359.0>

*

פורום אינפורמטיקה
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/board,14.0>
*

טיפים וטריקים מכנס אינפורמטיקה - חלק 1
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1360.0>

טיפים וטריקים מכנס אינפורמטיקה-חלק 2
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1361.0>

sequence
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1338.0>

כיצד ניתן להפעיל ב-Pre SQL פרוצדורה של אוראקל?
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1197.0>

מפגש משתמשי אינפורמטיקה - אג'נדה
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1336.0>

*

Customer Analytics
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/board,11.0>
*

תוכנות חינמיות לכריית נתונים
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,398.0>

כנס data mining של מיקרוסופט
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,386.0>

כריית נתונים - זקוק לעזרה
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1170.0>

עצי החלטה על רגל אחת
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,556.0>

קבוצת בקרה וקבוצת פעולה - האם יש חוקיות?
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1147.0>

פורום כריית נתונים
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/board,4.0>

היכן ניתן למצוא חומר על כריית נתונים בסביבת SQL Server?
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1365.0>

הרצאות על ייצור מידע וידע
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1347.0>

Clusters טבעים
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1339.0>

יתרונות. חסרונות של Oracle Bi
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1324.0>

מהפיכת BI, זה מתחיל
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1322.0>

*

פורום פנורמה
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/board,13.0>
*

פנורמה 6
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1321.0>

פנורמה MDX
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1281.0>

פנורמה 6.0
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1274.0>

"show only non empty members"
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1270.0>

בעיה בחישוב ממוצע משוקלל
<http://www.dwh.co.il/portal/component/option,com_smf/Itemid,88/topic,1254.0>

ידיעות חדשות

קבוצת מיחשוב הטמיעה פתרון בינה עסקית ביקבי רמת הגולן
<http://www.dwh.co.il/portal/content/view/1327/1/>

סאפ הכריזה על פתרון בינה עסקית עבור ארגונים בטחונים
<http://www.dwh.co.il/portal/content/view/1325/1/>

מיקרוסטרטג'י מציעה ממשק למיקרוסופט
<http://www.dwh.co.il/portal/content/view/1324/1/>

מעריב יישם מערכת קוגנוס של יבמ
<http://www.dwh.co.il/portal/content/view/1323/1/>

קבוצת מיחשוב ביצעה פרויקט בקבוצת תדביק
<http://www.dwh.co.il/portal/content/view/1322/1/>

גיא שקד מונה לסמנכ"ל שיווק ומכירות בגילון
<http://www.dwh.co.il/portal/content/view/1321/1/>

פוינטס משיקה תוכנה כשירות
<http://www.dwh.co.il/portal/content/view/1318/1/>

סאס דורגה ראשונה בדוח קרטיס
<http://www.dwh.co.il/portal/content/view/1317/1/>

חברת הסיגריות יישמה אינפורמטיקה
<http://www.dwh.co.il/portal/content/view/1316/1/>

אינפורמטיקה מוציאה גרסא חדשה
<http://www.dwh.co.il/portal/content/view/1314/1/>

משרות חדשות

דרוש/ה מיישם/ת ומפתח/ת COGNOS
<http://jobs.dwh.co.il/component/option,com_mtree/task,viewlink/link_id,363/Itemid,/>

מפתח/ת BI
<http://jobs.dwh.co.il/component/option,com_mtree/task,viewlink/link_id,362/Itemid,/>

מומחה/ית BO
<http://jobs.dwh.co.il/component/option,com_mtree/task,viewlink/link_id,361/Itemid,/>

מנהל/ת פרוייקטים בתחום ה- BI
<http://jobs.dwh.co.il/component/option,com_mtree/task,viewlink/link_id,360/Itemid,/>

מפתחי/ות INFORMATICA
<http://jobs.dwh.co.il/component/option,com_mtree/task,viewlink/link_id,359/Itemid,/>

מיישמי/ות SAP-BW
<http://jobs.dwh.co.il/component/option,com_mtree/task,viewlink/link_id,358/Itemid,/>

מפתחי/ות Business-Objects
<http://jobs.dwh.co.il/component/option,com_mtree/task,viewlink/link_id,357/Itemid,/>

מיישם BI | מיישמת BI
<http://jobs.dwh.co.il/component/option,com_mtree/task,viewlink/link_id,356/Itemid,/>

דרושים DBA sql server, BI
<http://jobs.dwh.co.il/component/option,com_mtree/task,viewlink/link_id,355/Itemid,/>

דרושים מיישמי OLAP
<http://jobs.dwh.co.il/component/option,com_mtree/task,viewlink/link_id,354/Itemid,/>

<br>

--
Powered by PHPlist, www.phplist.com --

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

gstreamer-plugins-libvisual

2009-12-02T19:38:37Z

Sir,

Regarding the above, I ran into a problem with gmerlin in that it would
not build and then did some searching, thinking and some experimentation.

What I have come up with is that the gstreamer-plugins-libvisual port
pulls in the old version of libvisual even if libvisual04 is installed
and the old version has been removed.

The problem is that when it pulls in libvisual rather than using
libvisual04, it then upsets gmerlin build because that uses the first
libvisual it comes across which is libvisual that doesn't have the
required declarations rather than libvisual04 which does. Once I
realised what was happening I removed libvisual while leaving
libvisual04 and gmerlin then compiled. After that, I rebuilt
gstreamer-plugins-libvisual and it pulled in libvisual even though
gmerlin had built using libvisual04 successfully.

I have no idea how to fix this apparently errant behaviour nor what
should be done to fix this problem so that it does occur again but it
would be good if something could be done to have
gstreamer-plugins-libvisual use libvisual04 properly without pulling in
libvisual which then causes problems with other builds.

It would be easy enough to edit the Makefile but as soon as I updated
the ports tree which is current, the problem would be reintroduced.

Hopefully you can do something to rectify the situation.

Regards,
Robert McKenzie.

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

snd_envy24ht regression in 8.0 (patch included)

2009-12-02T01:50:46Z

Hello,
I've got a Audiotrak Prodigy HD2 soundcard, based upon the VIA
Envy24HT-s chipset. Dmesg output is:

pcm1: <Envy24HT audio (AudioTrak Prodigy HD2)> port
0x3080-0x309f,0x3000-0x307f irq 28 at device 4.0 on pci18
pcm1: [GIANT-LOCKED]
pcm1: [ITHREAD]
pcm1: system configuration
SubVendorID: 0x3137, SubDeviceID: 0x4154
XIN2 Clock Source: 49.152MHz(192kHz*256)
MPU-401 UART(s) #: 1
ADC #: 1 and SPDIF receiver connected
DAC #: 1
Multi-track converter type: I2S(192KHz support, 24bit resolution,
ID#0x0)
S/PDIF(IN/OUT): 1/1 ID# 0x00
GPIO(mask/dir/state): 0xfff8ff/0xdfffff/0x200700

/dev/sndstat shows:

root@screw:pts/8 ~> cat /dev/sndstat
FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64)
Installed devices:
pcm0: <nVidia nForce4> at io 0x1800, 0x1400 irq 22 bufsz 16384 kld
snd_ich [MPSAFE] (1p:1v/1r:1v channels duplex)
pcm1: <Envy24HT audio (AudioTrak Prodigy HD2)> at io
0x3080:32,0x3000:128 irq 28 [GIANT] (1p:1v/5r:1v channels duplex
default)

In FreeBSD 7.2 it worked just like a charm but after upgrading to 8.0
the left stereo channel is only half as loud as the right one. It can be
reproduced with either speakers and headphones. I tracked it down to a
change in revision 188480 of spicds.c, the change "fix: stupid bug with
volume control for AK4396" breaks volume control for me. The attached
patch fixes the problem by reverting the specific change but I guess
it'll break some other cards again.

An other possible work around is to double the volume of the left
channel via the mixer.

Ciao,
Yamagi

--
Homepage: www.yamagi.org
Jabber: yamagi@...
GnuPG/GPG: 0xEFBCCBCB
--- spicds.c_alt 2009-12-02 09:59:38.000000000 +0100
+++ spicds.c 2009-12-02 10:06:40.000000000 +0100
@@ -300,8 +300,7 @@
case SPICDS_TYPE_WM8770:
right = right + 27;
break;
- case SPICDS_TYPE_AK4381:
- case SPICDS_TYPE_AK4396:
+ case SPICDS_TYPE_AK4381 || SPICDS_TYPE_AK4396:
right = right * 255 / 100;
break;
default:

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Current problem reports assigned to freebsd-multimedia@FreeBSD.org

2009-11-30T03:06:56Z

Note: to view an individual PR, use:
http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.

S Tracker Resp. Description
--------------------------------------------------------------------------------
o ports/140999 multimedia [PATCH] audio/wavpack: update to 4.60.0, take maintain
o ports/140919 multimedia [PATCH] multimedia/libtheora: update to 1.1.1
o ports/140865 multimedia [PATCH] multimedia/x264: update to 0.0.20091124
o kern/140591 multimedia [PATCH][sound] No sound output on lineout/headphone ja
o kern/140453 multimedia [sound] No sound inside Virtualbox on 50% volume
o ports/139071 multimedia multimedia/x264 does not link on 8-RC1
o ports/138386 multimedia multimedia/mkvtoolnix lacks the Qt-Gui and configure-k
o ports/138213 multimedia Apply SqueezeCenter patches to audio/faad that enable
o kern/137589 multimedia [snd_uaudio] snd_uaudio.ko (USB audio driver) doesn't
o kern/134767 multimedia [sound] [snd_hda] [regression] Sigmatel STAC9205X no s
o ports/133462 multimedia multimedia/x264 build fails on powerpc
o kern/132848 multimedia [sound] [snd_emu10kx] driver problem with card init, s
o kern/132511 multimedia [sound] [snd_hda] Probing ALC888 codec on ASRock K10N7
o kern/129604 multimedia [sound] Sound stops with error: pcm0:virtual:dsp0.vp0:
o kern/127131 multimedia [bktr] /usr/src/sys/dev/bktr/bktr_os.c, line 469: wron
o ports/127084 multimedia multimedia/linux-realplayer is vulnerable
s kern/125756 multimedia [sound] [patch] cannot detect soft-modem on HDA bus
o kern/124319 multimedia [sound] [snd_emu10k1] [regression] Cannot record from
o kern/122086 multimedia [sound] maestro sound driver is working, but mixer ini
p kern/121156 multimedia [sound] [patch] Turn on inverted external amplifier se
o kern/120857 multimedia [sound] [snd_emu10k1] snd_emu10k1 driver issues a warn
o kern/120780 multimedia [sound] [snd_hda] snd_hda doesn't work on Dell Latitut
o kern/119973 multimedia [sound] [snd_maestro] [regression] snd_maestro only wo
o kern/119931 multimedia [sound] No sound card detected on ASUS "K8V-X SE R2.00
o kern/119759 multimedia [sound] [snd_emu10k1] [regression] Can not record anyt
f kern/115666 multimedia [sound] Microphone does not work
o kern/115300 multimedia [sound] [snd_hda] [regression] snd_hda(4) fails to att
o kern/114760 multimedia [sound] [snd_cmi] snd_cmi driver causing sporadic syst
s kern/113950 multimedia [sound] [patch] [request] add per-vchan mixer support
o kern/111767 multimedia [sound] ATI SB450 High Definition Audio Controller sou
o kern/107516 multimedia [sound] [snd_emu10k1] - skips, clicks and lag after a
o kern/107051 multimedia [sound] only 2 channels output works for the ALC850 (o
o kern/104874 multimedia [sound] [snd_emu10k1] kldload snd_emu10k1 hangs system
o kern/104626 multimedia [sound] FreeBSD 6.2 does not support SoundBlaster Audi
o kern/101417 multimedia [sound] 4-speakers output not possible on Asus A8V-Del
o kern/100859 multimedia [sound] [snd_ich] snd_ich broken on GIGABYTE 915 syste
o kern/98752 multimedia [sound] Intel ich6 82801 FB - on Packard Bell A8810 la
o kern/98504 multimedia [sound] Sound is distorted with SB Live 5.1
o kern/98496 multimedia [sound] [snd_ich] some functions don't work in my soun
o kern/98167 multimedia [sound] [es137x] [patch] ES1370 mixer volumes incorrec
o kern/97609 multimedia [sound] Load Sound Module - VIA8233 - fails
o kern/97535 multimedia [sound] [snd_mss] doesn't work in 6.0-RELEASE and abov
o kern/96538 multimedia [sound] emu10k1-driver inverts channels
o kern/95086 multimedia [sound] uaudio line in problem with sbdm lx
o kern/94279 multimedia [sound] [snd_neomagic] snd_neomagic crashes on FreeBSD
o kern/93986 multimedia [sound] Acer TravelMate 4652LMi pcm0 channel dead
o kern/92512 multimedia [sound] distorted mono output with emu10k1
o kern/87782 multimedia [sound] snd_t4dwave and pcm0:record:0: record interrup
s kern/83697 multimedia [sound] [snd_mss] [patch] support, docs added for full
o kern/82043 multimedia [sound] snd_emu10k1 - mixer does not work.
o kern/81146 multimedia [sound] Sound isn't working AT ALL for Sis7012 onboard
o kern/80632 multimedia [sound] pcm driver missing support for CMI8738 auxilla
o kern/79912 multimedia [sound] sound broken for 2 VIA chipsets: interrupt sto
o kern/79905 multimedia [sound] sis7018 sound module problem
o kern/79678 multimedia [sound] sound works except recording from any source
f kern/72995 multimedia [sound] Intel ICH2 (82801BA) - sound nearly inaudible
o kern/63204 multimedia [sound] /dev/mixer broken with ESS Maestro-2E (still o
o kern/60677 multimedia [sound] [patch] No reaction of volume controy key on I
s kern/60599 multimedia [bktr] [partial patch] No sound for ATI TV Wonder (ste
o kern/37600 multimedia [sound] [partial patch] t4dwave drive doesn't record.
o kern/23546 multimedia [sound] [snd_csa] [patch] csa DMA-interrupt problem

61 problems total.

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: ports/140999: [PATCH] audio/wavpack: update to 4.60.0, take maintainership

2009-11-29T08:50:18Z

Synopsis: [PATCH] audio/wavpack: update to 4.60.0, take maintainership

Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-multimedia
Responsible-Changed-By: edwin
Responsible-Changed-When: Sun Nov 29 16:50:18 UTC 2009
Responsible-Changed-Why:
Over to maintainer (via the GNATS Auto Assign Tool)

http://www.freebsd.org/cgi/query-pr.cgi?pr=140999
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

[PATCH] audio/wavpack: update to 4.60.0, take maintainership

2009-11-29T08:47:14Z

>Submitter-Id: current-users
>Originator: Sunpoet Po-Chuan Hsieh
>Organization: SUNPOET.net
>Confidential: no
>Synopsis: [PATCH] audio/wavpack: update to 4.60.0, take maintainership
>Severity: non-critical
>Priority: low
>Category: ports
>Class: update
>Release: FreeBSD 7.2-STABLE amd64
>Environment:

System: FreeBSD bonjour.sunpoet.net 7.2-STABLE FreeBSD 7.2-STABLE #0: Wed Oct 7 10:53:58 CST
>Description:
- Update to 4.60.0
- Take maintainership

Port maintainer (multimedia@...) is cc'd.

Generated with FreeBSD Port Tools 0.99
>How-To-Repeat:
>Fix:

--- wavpack-4.60.0.patch begins here ---
diff -ruN --exclude=CVS /usr/ports/audio/wavpack/Makefile /usr/ports/sunpoet/wavpack/Makefile
--- /usr/ports/audio/wavpack/Makefile 2009-02-04 13:48:36.000000000 +0800
+++ /usr/ports/sunpoet/wavpack/Makefile 2009-11-30 00:41:16.000000000 +0800
@@ -6,11 +6,11 @@
#

PORTNAME= wavpack
-PORTVERSION= 4.50.1
+PORTVERSION= 4.60.0
CATEGORIES= audio
MASTER_SITES= http://www.wavpack.com/

-MAINTAINER= multimedia@...
+MAINTAINER= sunpoet@...
COMMENT= Audio codec for lossless, lossy and hybrid compression

USE_BZIP2= yes
diff -ruN --exclude=CVS /usr/ports/audio/wavpack/distinfo /usr/ports/sunpoet/wavpack/distinfo
--- /usr/ports/audio/wavpack/distinfo 2009-01-15 00:01:16.000000000 +0800
+++ /usr/ports/sunpoet/wavpack/distinfo 2009-11-30 00:41:37.000000000 +0800
@@ -1,3 +1,3 @@
-MD5 (wavpack-4.50.1.tar.bz2) = 2c9d7e3672f60070d4fd2c86c924a3b4
-SHA256 (wavpack-4.50.1.tar.bz2) = 29c036d10fb8bcb6daa58718d112394291887fc0e9b108851017218184483954
-SIZE (wavpack-4.50.1.tar.bz2) = 375792
+MD5 (wavpack-4.60.0.tar.bz2) = 722f90393b292cd1413e8af8250a3783
+SHA256 (wavpack-4.60.0.tar.bz2) = 7fcbcf8d1ecef2ea816fc0e1b9c259d56320b425ce1239283a762ae7e45b877a
+SIZE (wavpack-4.60.0.tar.bz2) = 386771
diff -ruN --exclude=CVS /usr/ports/audio/wavpack/pkg-plist /usr/ports/sunpoet/wavpack/pkg-plist
--- /usr/ports/audio/wavpack/pkg-plist 2007-01-03 10:19:22.000000000 +0800
+++ /usr/ports/sunpoet/wavpack/pkg-plist 2009-11-30 00:46:28.000000000 +0800
@@ -5,6 +5,7 @@
lib/libwavpack.a
lib/libwavpack.la
lib/libwavpack.so
-lib/libwavpack.so.1
+lib/libwavpack.so.2
libdata/pkgconfig/wavpack.pc
+@dirrm libdata/pkgconfig
@dirrm include/wavpack
--- wavpack-4.60.0.patch ends here ---

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: Call for Testers: MythTV 0.22 (Trial 2)

2009-11-28T04:08:26Z

On Mon, 23 Nov 2009 12:45:03 +0100 (CET)
Bernhard Froehlich <decke@...> wrote:

> There were some problems with the first call for testers but that
> compile problems should be fixed now and x11 and ivtv should be
> working.

FWIW, this happens when I 'make deinstall'
/yes, every time):
root@kg-quiet# make deinstall
===> Deinstalling for multimedia/mythtv
===> Deinstalling mythtv-0.22
pkg_delete: unable to completely remove directory '/usr/local/include/mythtv/libmythui'
pkg_delete: unable to completely remove directory '/usr/local/include/mythtv'
pkg_delete: couldn't entirely delete package (perhaps the packing list is
incorrectly specified?)

Perhaps worth looking into when the port is fixed.
--
Regards,
Torfinn Ingolfsen

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: [PATCH] multimedia/x264: update to 0.0.20091124

2009-11-27T22:21:57Z

On Fri, 27 Nov 2009, Gea-Suan Lin wrote:

> Thanks for the url. I've used another approach that define
> log2f(x) = (log(x) / M_LN2) when log2f not defined, this way will be
> much simple.
>
> Please check http://colo-p.gslin.org/~gslin/tmp/x264.shar this version.

I'll give it a test run. I tried simply changing the log base before with
just the actualy value in the file (wasn't aware of M_LN2) and I got some
strange floating point errors in x264. May have been something else wrong,
though.

Also, if I build with gcc44 and enable assembly, I get 3-4x the encoding
speed. As a side effect, the stack protection must also be disabled. Just
a thought!

> On Wed, Nov 25, 2009 at 01:56:06PM -0600, Wes Morgan wrote:
>> On Thu, 26 Nov 2009, Gea-Suan Lin wrote:
>>
>>>
>>>> Submitter-Id: current-users
>>>> Originator: Gea-Suan Lin
>>>> Organization:
>>>> Confidential: no
>>>> Synopsis: [PATCH] multimedia/x264: update to 0.0.20091124
>>>> Severity: non-critical
>>>> Priority: low
>>>> Category: ports
>>>> Class: update
>>>> Release: FreeBSD 7.2-RELEASE-p3 i386
>>>> Environment:
>>> System: FreeBSD colo-p.gslin.org 7.2-RELEASE-p3 FreeBSD 7.2-RELEASE-p3 #0: Sat Aug 22 10:48:39 CST 2009
>>>> Description:
>>> - Update to 0.0.20091124
>>>
>>> Port maintainer (multimedia@...) is cc'd.
>>>
>>> Generated with FreeBSD Port Tools 0.99
>>>> How-To-Repeat:
>>>> Fix:
>>>
>>> --- x264-0.0.20091124.patch begins here ---
>>> diff -ruN --exclude=CVS /usr/ports/multimedia/x264/Makefile /home/staff/gslin/work/ports/x264/Makefile
>>> --- /usr/ports/multimedia/x264/Makefile 2009-11-23 04:28:29.000000000 +0800
>>> +++ /home/staff/gslin/work/ports/x264/Makefile 2009-11-26 00:13:16.000000000 +0800
>>> @@ -6,7 +6,7 @@
>>> # $Id: Makefile 30 2006-10-30 22:15:26Z buhnux $
>>>
>>> PORTNAME= x264
>>> -PORTVERSION= 0.0.20081218
>>> +PORTVERSION= 0.0.20091124
>>> CATEGORIES= multimedia
>>> MASTER_SITES= http://downloads.videolan.org/pub/videolan/x264/snapshots/ \
>>> http://samples.mplayerhq.hu/yuv4mpeg2/:pgo
>>> @@ -16,7 +16,7 @@
>>> EXTRACT_ONLY= ${PORTNAME}-snapshot-${PORTVERSION:S/0.0.//}-2245${EXTRACT_SUFX}
>>>
>>> MAINTAINER= multimedia@...
>>> -COMMENT?= Multimedia library and tool for encoding H.264/AVC video streams
>>> +COMMENT= Multimedia library and tool for encoding H.264/AVC video streams
>>>
>>> BUILD_DEPENDS= yasm>=0.6.0:${PORTSDIR}/devel/yasm
>>>
>>> @@ -36,7 +36,7 @@
>>>
>>> CONFIGURE_ARGS+= --extra-cflags="${CPPFLAGS} ${CFLAGS} -fPIC -I${LOCALBASE}/include -I${LOCALBASE}/include" \
>>> --extra-ldflags="${LDFLAGS} -L${LOCALBASE}/lib -L${LOCALBASE}/lib" \
>>> - --enable-shared
>>> + --enable-shared --disable-asm
>>
>> I'm pretty certain that this will not work on amd64. The gcc internal
>> "log2f" function won't be picked up. See this email for a fix:
>>
>> http://lists.freebsd.org/pipermail/freebsd-multimedia/2009-March/009819.html
>>
>> Would it also be possible to add knobs for enabling the internal assembler
>> and adding dependencies on both binutils and gcc 4.4 from ports? I've been
>> using a snapshot built this way for about 2 weeks now doing some pretty
>> heavy encoding and have no problems other than the log2f patch.
>
>

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: kern/134767: [snd_hda] Sigmatel STAC9205X no sound under RELENG_7_2_0_RELEASE [regression]

2009-11-27T15:10:02Z

The following reply was made to PR kern/134767; it has been noted by GNATS.

From: Lars Hecking <lhecking@...>
To: bug-followup@..., lhecking@...
Cc:
Subject: Re: kern/134767: [snd_hda] Sigmatel STAC9205X no sound under
RELENG_7_2_0_RELEASE [regression]
Date: Fri, 27 Nov 2009 23:07:34 +0000

Back to square one. The problem persists in FreeBSD 8.0, and comparing the
code with 7.x, I don't think my workaround from 7.2 will work.

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: ports/140919: [PATCH] multimedia/libtheora: update to 1.1.1

2009-11-26T19:40:18Z

Synopsis: [PATCH] multimedia/libtheora: update to 1.1.1

Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-multimedia
Responsible-Changed-By: edwin
Responsible-Changed-When: Fri Nov 27 03:40:18 UTC 2009
Responsible-Changed-Why:
Over to maintainer (via the GNATS Auto Assign Tool)

http://www.freebsd.org/cgi/query-pr.cgi?pr=140919
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

[PATCH] multimedia/libtheora: update to 1.1.1

2009-11-26T19:33:34Z

>Submitter-Id: current-users
>Originator: Gea-Suan Lin
>Organization:
>Confidential: no
>Synopsis: [PATCH] multimedia/libtheora: update to 1.1.1
>Severity: non-critical
>Priority: low
>Category: ports
>Class: update
>Release: FreeBSD 7.2-RELEASE-p3 i386
>Environment:

System: FreeBSD colo-p.gslin.org 7.2-RELEASE-p3 FreeBSD 7.2-RELEASE-p3 #0: Sat Aug 22 10:48:39 CST 2009
>Description:
- Update to 1.1.1

Removed file(s):
- files/patch-issue1515

Port maintainer (multimedia@...) is cc'd.

Generated with FreeBSD Port Tools 0.99
>How-To-Repeat:
>Fix:

--- libtheora-1.1.1.patch begins here ---
diff -ruN --exclude=CVS /usr/ports/multimedia/libtheora/Makefile /home/staff/gslin/work/ports/libtheora/Makefile
--- /usr/ports/multimedia/libtheora/Makefile 2009-08-03 03:34:50.000000000 +0800
+++ /home/staff/gslin/work/ports/libtheora/Makefile 2009-11-27 11:31:49.000000000 +0800
@@ -6,8 +6,7 @@
#

PORTNAME= libtheora
-PORTVERSION= 1.0
-PORTREVISION= 1
+PORTVERSION= 1.1.1
CATEGORIES= multimedia
MASTER_SITES= http://downloads.xiph.org/releases/theora/ \
http://distfiles.master.finkmirrors.net/
@@ -15,7 +14,8 @@
MAINTAINER= multimedia@...
COMMENT= Theora video codec for the Ogg multimedia streaming system

-LIB_DEPENDS= vorbis.4:${PORTSDIR}/audio/libvorbis
+LIB_DEPENDS= ogg:${PORTSDIR}/audio/libogg \
+ vorbis:${PORTSDIR}/audio/libvorbis

USE_BZIP2= yes
USE_LDCONFIG= yes
@@ -29,8 +29,14 @@
--enable-shared \
--disable-examples

+.include <bsd.port.pre.mk>
+
+.if ${ARCH} != "i386"
+CONFIGURE_ARGS+= --disable-asm
+.endif
+
post-patch:
@${REINPLACE_CMD} -e 's|doc||g' ${WRKSRC}/Makefile.in
@${REINPLACE_CMD} -e 's, x86_64), x86_64|amd64),' ${WRKSRC}/configure

-.include <bsd.port.mk>
+.include <bsd.port.post.mk>
diff -ruN --exclude=CVS /usr/ports/multimedia/libtheora/distinfo /home/staff/gslin/work/ports/libtheora/distinfo
--- /usr/ports/multimedia/libtheora/distinfo 2009-03-31 06:10:53.000000000 +0800
+++ /home/staff/gslin/work/ports/libtheora/distinfo 2009-11-27 11:22:57.000000000 +0800
@@ -1,3 +1,3 @@
-MD5 (libtheora-1.0.tar.bz2) = c963937053f45a7878954bed37ceb182
-SHA256 (libtheora-1.0.tar.bz2) = 3ae9df56e8fc75ffe26e63a13cae2ce79d079416175fb0baffe0e2de8dc91a6d
-SIZE (libtheora-1.0.tar.bz2) = 1652987
+MD5 (libtheora-1.1.1.tar.bz2) = 292ab65cedd5021d6b7ddd117e07cd8e
+SHA256 (libtheora-1.1.1.tar.bz2) = b6ae1ee2fa3d42ac489287d3ec34c5885730b1296f0801ae577a35193d3affbc
+SIZE (libtheora-1.1.1.tar.bz2) = 1903175
diff -ruN --exclude=CVS /usr/ports/multimedia/libtheora/files/patch-Makefile.in /home/staff/gslin/work/ports/libtheora/files/patch-Makefile.in
--- /usr/ports/multimedia/libtheora/files/patch-Makefile.in 2009-03-31 06:10:53.000000000 +0800
+++ /home/staff/gslin/work/ports/libtheora/files/patch-Makefile.in 2009-11-27 11:25:45.000000000 +0800
@@ -1,20 +1,20 @@
---- Makefile.in.orig 2008-10-29 11:36:48.000000000 +0100
-+++ Makefile.in 2009-02-25 03:35:59.886902862 +0100
-@@ -80,7 +80,7 @@
- DATA = $(pkgconfig_DATA)
- ETAGS = etags
- CTAGS = ctags
--DIST_SUBDIRS = lib include doc tests m4 examples
-+DIST_SUBDIRS = lib include m4
- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
- distdir = $(PACKAGE)-$(VERSION)
- top_distdir = $(distdir)
-@@ -274,7 +274,7 @@
- libtheora.spec libtheora.spec.in \
+--- Makefile.in.orig 2009-11-27 11:25:03.000000000 +0800
++++ Makefile.in 2009-11-27 11:25:30.000000000 +0800
+@@ -177,7 +177,7 @@
theora-uninstalled.pc.in

+
-pkgconfigdir = $(libdir)/pkgconfig
-+pkgconfigdir = $(prefix)/libdata/pkgconfig
++pkgconfigdir = $(libdir)/libdata/pkgconfig
pkgconfig_DATA = theora.pc theoradec.pc theoraenc.pc
+ subdir = .
+ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+@@ -200,7 +200,7 @@
+ missing mkinstalldirs theora-uninstalled.pc.in theora.pc.in \
+ theoradec-uninstalled.pc.in theoradec.pc.in \
+ theoraenc-uninstalled.pc.in theoraenc.pc.in
+-DIST_SUBDIRS = lib include doc tests m4 examples
++DIST_SUBDIRS = lib include m4
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
diff -ruN --exclude=CVS /usr/ports/multimedia/libtheora/files/patch-issue1515 /home/staff/gslin/work/ports/libtheora/files/patch-issue1515
--- /usr/ports/multimedia/libtheora/files/patch-issue1515 2009-03-31 06:10:53.000000000 +0800
+++ /home/staff/gslin/work/ports/libtheora/files/patch-issue1515 1970-01-01 08:00:00.000000000 +0800
@@ -1,64 +0,0 @@
-diff -ru lib/enc.orig/encode.c lib/enc/encode.c
---- lib/enc.orig/encode.c 2009-02-25 00:37:51.868139315 +0100
-+++ lib/enc/encode.c 2009-02-25 00:23:45.582743808 +0100
-@@ -934,7 +934,7 @@
- ogg_uint32_t SBRows,
- ogg_uint32_t SBCols){
-
-- ogg_int32_t FragIndex; /* Fragment number */
-+ ogg_int32_t FragIndex, FirstFragIndex; /* Fragment number */
- ogg_uint32_t MB, B; /* Macro-Block, Block indices */
- ogg_uint32_t SBrow; /* Super-Block row number */
- ogg_uint32_t SBcol; /* Super-Block row number */
-@@ -953,19 +953,20 @@
- /* There may be MB's lying out of frame which must be
- ignored. For these MB's Top left block will have a negative
- Fragment Index. */
-- if ( QuadMapToMBTopLeft(cpi->pb.BlockMap,SB,MB) >= 0 ) {
-+ if ( (FirstFragIndex = QuadMapToMBTopLeft(cpi->pb.BlockMap,SB,MB)) >= 0 ) {
-
- cpi->MBCodingMode = CODE_INTRA;
-
- /* Now actually code the blocks. */
- for ( B=0; B<4; B++ ) {
- FragIndex = QuadMapToIndex1( cpi->pb.BlockMap, SB, MB, B );
-- cpi->pb.FragCodingMethod[FragIndex] = cpi->MBCodingMode;
-+ if (FragIndex >= 0)
-+ cpi->pb.FragCodingMethod[FragIndex] = cpi->MBCodingMode;
- }
-
- /* Matching fragments in the U and V planes */
-- UVRow = (FragIndex / (cpi->pb.HFragments * 2));
-- UVColumn = (FragIndex % cpi->pb.HFragments) / 2;
-+ UVRow = (FirstFragIndex / (cpi->pb.HFragments * 2));
-+ UVColumn = (FirstFragIndex % cpi->pb.HFragments) / 2;
- UVFragOffset = (UVRow * (cpi->pb.HFragments / 2)) + UVColumn;
-
- cpi->pb.FragCodingMethod[cpi->pb.YPlaneFragments + UVFragOffset] =
-Only in lib/enc: encode.c.orig
-diff -ru lib/enc.orig/misc_common.c lib/enc/misc_common.c
---- lib/enc.orig/misc_common.c 2009-02-25 00:37:51.865139234 +0100
-+++ lib/enc/misc_common.c 2009-02-25 00:51:20.362286530 +0100
-@@ -87,14 +87,14 @@
- if ( QuadMapToMBTopLeft(cpi->pb.BlockMap, SB, MB ) >= 0 ) {
- /* Up regulate the component blocks Y then UV. */
- for ( B=0; B<4; B++ ){
-- FragIndex = QuadMapToIndex1( cpi->pb.BlockMap, SB, MB, B );
--
-- if ( ( !cpi->pb.display_fragments[FragIndex] ) &&
-- ( (NoCheck) || (cpi->FragmentLastQ[FragIndex] > RegulationQ) ) ){
-- cpi->pb.display_fragments[FragIndex] = 1;
-- cpi->extra_fragments[FragIndex] = 1;
-- cpi->FragmentLastQ[FragIndex] = RegulationQ;
-- cpi->MotionScore++;
-+ if ((FragIndex = QuadMapToIndex1( cpi->pb.BlockMap, SB, MB, B )) >= 0) {
-+ if ( ( !cpi->pb.display_fragments[FragIndex] ) &&
-+ ( (NoCheck) || (cpi->FragmentLastQ[FragIndex] > RegulationQ) ) ){
-+ cpi->pb.display_fragments[FragIndex] = 1;
-+ cpi->extra_fragments[FragIndex] = 1;
-+ cpi->FragmentLastQ[FragIndex] = RegulationQ;
-+ cpi->MotionScore++;
-+ }
- }
- }
-
diff -ruN --exclude=CVS /usr/ports/multimedia/libtheora/pkg-plist /home/staff/gslin/work/ports/libtheora/pkg-plist
--- /usr/ports/multimedia/libtheora/pkg-plist 2009-03-31 06:10:53.000000000 +0800
+++ /home/staff/gslin/work/ports/libtheora/pkg-plist 2009-11-27 11:28:28.000000000 +0800
@@ -1,20 +1,23 @@
-include/theora/theora.h
+@comment $FreeBSD$
include/theora/codec.h
-include/theora/theoraenc.h
+include/theora/theora.h
include/theora/theoradec.h
+include/theora/theoraenc.h
+lib/libdata/pkgconfig/theora.pc
+lib/libdata/pkgconfig/theoradec.pc
+lib/libdata/pkgconfig/theoraenc.pc
lib/libtheora.a
lib/libtheora.la
lib/libtheora.so
lib/libtheora.so.0
-lib/libtheoraenc.a
-lib/libtheoraenc.la
-lib/libtheoraenc.so
-lib/libtheoraenc.so.1
lib/libtheoradec.a
lib/libtheoradec.la
lib/libtheoradec.so
lib/libtheoradec.so.1
-libdata/pkgconfig/theora.pc
-libdata/pkgconfig/theoraenc.pc
-libdata/pkgconfig/theoradec.pc
-@dirrm include/theora
+lib/libtheoraenc.a
+lib/libtheoraenc.la
+lib/libtheoraenc.so
+lib/libtheoraenc.so.1
+@dirrmtry lib/libdata/pkgconfig
+@dirrmtry lib/libdata
+@dirrmtry include/theora
--- libtheora-1.1.1.patch ends here ---

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: [PATCH] multimedia/x264: update to 0.0.20091124

2009-11-26T19:11:44Z

Thanks for the url. I've used another approach that define
log2f(x) = (log(x) / M_LN2) when log2f not defined, this way will be
much simple.

Please check http://colo-p.gslin.org/~gslin/tmp/x264.shar this version.

On Wed, Nov 25, 2009 at 01:56:06PM -0600, Wes Morgan wrote:

> On Thu, 26 Nov 2009, Gea-Suan Lin wrote:
>
> >
> >> Submitter-Id: current-users
> >> Originator: Gea-Suan Lin
> >> Organization:
> >> Confidential: no
> >> Synopsis: [PATCH] multimedia/x264: update to 0.0.20091124
> >> Severity: non-critical
> >> Priority: low
> >> Category: ports
> >> Class: update
> >> Release: FreeBSD 7.2-RELEASE-p3 i386
> >> Environment:
> > System: FreeBSD colo-p.gslin.org 7.2-RELEASE-p3 FreeBSD 7.2-RELEASE-p3 #0: Sat Aug 22 10:48:39 CST 2009
> >> Description:
> > - Update to 0.0.20091124
> >
> > Port maintainer (multimedia@...) is cc'd.
> >
> > Generated with FreeBSD Port Tools 0.99
> >> How-To-Repeat:
> >> Fix:
> >
> > --- x264-0.0.20091124.patch begins here ---
> > diff -ruN --exclude=CVS /usr/ports/multimedia/x264/Makefile /home/staff/gslin/work/ports/x264/Makefile
> > --- /usr/ports/multimedia/x264/Makefile 2009-11-23 04:28:29.000000000 +0800
> > +++ /home/staff/gslin/work/ports/x264/Makefile 2009-11-26 00:13:16.000000000 +0800
> > @@ -6,7 +6,7 @@
> > # $Id: Makefile 30 2006-10-30 22:15:26Z buhnux $
> >
> > PORTNAME= x264
> > -PORTVERSION= 0.0.20081218
> > +PORTVERSION= 0.0.20091124
> > CATEGORIES= multimedia
> > MASTER_SITES= http://downloads.videolan.org/pub/videolan/x264/snapshots/ \
> > http://samples.mplayerhq.hu/yuv4mpeg2/:pgo
> > @@ -16,7 +16,7 @@
> > EXTRACT_ONLY= ${PORTNAME}-snapshot-${PORTVERSION:S/0.0.//}-2245${EXTRACT_SUFX}
> >
> > MAINTAINER= multimedia@...
> > -COMMENT?= Multimedia library and tool for encoding H.264/AVC video streams
> > +COMMENT= Multimedia library and tool for encoding H.264/AVC video streams
> >
> > BUILD_DEPENDS= yasm>=0.6.0:${PORTSDIR}/devel/yasm
> >
> > @@ -36,7 +36,7 @@
> >
> > CONFIGURE_ARGS+= --extra-cflags="${CPPFLAGS} ${CFLAGS} -fPIC -I${LOCALBASE}/include -I${LOCALBASE}/include" \
> > --extra-ldflags="${LDFLAGS} -L${LOCALBASE}/lib -L${LOCALBASE}/lib" \
> > - --enable-shared
> > + --enable-shared --disable-asm
>
> I'm pretty certain that this will not work on amd64. The gcc internal
> "log2f" function won't be picked up. See this email for a fix:
>
> http://lists.freebsd.org/pipermail/freebsd-multimedia/2009-March/009819.html
>
> Would it also be possible to add knobs for enabling the internal assembler
> and adding dependencies on both binutils and gcc 4.4 from ports? I've been
> using a snapshot built this way for about 2 weeks now doing some pretty
> heavy encoding and have no problems other than the log2f patch.

--
* Gea-Suan Lin (public key: Using https://keyserver.pgp.com/ to search)
* If you cannot convince them, confuse them. -- Harry S Truman
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: [PATCH] multimedia/x264: update to 0.0.20091124

2009-11-25T11:56:06Z

On Thu, 26 Nov 2009, Gea-Suan Lin wrote:

>
>> Submitter-Id: current-users
>> Originator: Gea-Suan Lin
>> Organization:
>> Confidential: no
>> Synopsis: [PATCH] multimedia/x264: update to 0.0.20091124
>> Severity: non-critical
>> Priority: low
>> Category: ports
>> Class: update
>> Release: FreeBSD 7.2-RELEASE-p3 i386
>> Environment:
> System: FreeBSD colo-p.gslin.org 7.2-RELEASE-p3 FreeBSD 7.2-RELEASE-p3 #0: Sat Aug 22 10:48:39 CST 2009
>> Description:
> - Update to 0.0.20091124
>
> Port maintainer (multimedia@...) is cc'd.
>
> Generated with FreeBSD Port Tools 0.99
>> How-To-Repeat:
>> Fix:
>
> --- x264-0.0.20091124.patch begins here ---
> diff -ruN --exclude=CVS /usr/ports/multimedia/x264/Makefile /home/staff/gslin/work/ports/x264/Makefile
> --- /usr/ports/multimedia/x264/Makefile 2009-11-23 04:28:29.000000000 +0800
> +++ /home/staff/gslin/work/ports/x264/Makefile 2009-11-26 00:13:16.000000000 +0800
> @@ -6,7 +6,7 @@
> # $Id: Makefile 30 2006-10-30 22:15:26Z buhnux $
>
> PORTNAME= x264
> -PORTVERSION= 0.0.20081218
> +PORTVERSION= 0.0.20091124
> CATEGORIES= multimedia
> MASTER_SITES= http://downloads.videolan.org/pub/videolan/x264/snapshots/ \
> http://samples.mplayerhq.hu/yuv4mpeg2/:pgo
> @@ -16,7 +16,7 @@
> EXTRACT_ONLY= ${PORTNAME}-snapshot-${PORTVERSION:S/0.0.//}-2245${EXTRACT_SUFX}
>
> MAINTAINER= multimedia@...
> -COMMENT?= Multimedia library and tool for encoding H.264/AVC video streams
> +COMMENT= Multimedia library and tool for encoding H.264/AVC video streams
>
> BUILD_DEPENDS= yasm>=0.6.0:${PORTSDIR}/devel/yasm
>
> @@ -36,7 +36,7 @@
>
> CONFIGURE_ARGS+= --extra-cflags="${CPPFLAGS} ${CFLAGS} -fPIC -I${LOCALBASE}/include -I${LOCALBASE}/include" \
> --extra-ldflags="${LDFLAGS} -L${LOCALBASE}/lib -L${LOCALBASE}/lib" \
> - --enable-shared
> + --enable-shared --disable-asm

I'm pretty certain that this will not work on amd64. The gcc internal
"log2f" function won't be picked up. See this email for a fix:

http://lists.freebsd.org/pipermail/freebsd-multimedia/2009-March/009819.html

Would it also be possible to add knobs for enabling the internal assembler
and adding dependencies on both binutils and gcc 4.4 from ports? I've been
using a snapshot built this way for about 2 weeks now doing some pretty
heavy encoding and have no problems other than the log2f patch.
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: ports/140865: [PATCH] multimedia/x264: update to 0.0.20091124

2009-11-25T08:20:13Z

Synopsis: [PATCH] multimedia/x264: update to 0.0.20091124

Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-multimedia
Responsible-Changed-By: edwin
Responsible-Changed-When: Wed Nov 25 16:20:12 UTC 2009
Responsible-Changed-Why:
Over to maintainer (via the GNATS Auto Assign Tool)

http://www.freebsd.org/cgi/query-pr.cgi?pr=140865
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

[PATCH] multimedia/x264: update to 0.0.20091124

2009-11-25T08:14:09Z

>Submitter-Id: current-users
>Originator: Gea-Suan Lin
>Organization:
>Confidential: no
>Synopsis: [PATCH] multimedia/x264: update to 0.0.20091124
>Severity: non-critical
>Priority: low
>Category: ports
>Class: update
>Release: FreeBSD 7.2-RELEASE-p3 i386
>Environment:

System: FreeBSD colo-p.gslin.org 7.2-RELEASE-p3 FreeBSD 7.2-RELEASE-p3 #0: Sat Aug 22 10:48:39 CST 2009
>Description:
- Update to 0.0.20091124

Port maintainer (multimedia@...) is cc'd.

Generated with FreeBSD Port Tools 0.99
>How-To-Repeat:
>Fix:

--- x264-0.0.20091124.patch begins here ---
diff -ruN --exclude=CVS /usr/ports/multimedia/x264/Makefile /home/staff/gslin/work/ports/x264/Makefile
--- /usr/ports/multimedia/x264/Makefile 2009-11-23 04:28:29.000000000 +0800
+++ /home/staff/gslin/work/ports/x264/Makefile 2009-11-26 00:13:16.000000000 +0800
@@ -6,7 +6,7 @@
# $Id: Makefile 30 2006-10-30 22:15:26Z buhnux $

PORTNAME= x264
-PORTVERSION= 0.0.20081218
+PORTVERSION= 0.0.20091124
CATEGORIES= multimedia
MASTER_SITES= http://downloads.videolan.org/pub/videolan/x264/snapshots/ \
http://samples.mplayerhq.hu/yuv4mpeg2/:pgo
@@ -16,7 +16,7 @@
EXTRACT_ONLY= ${PORTNAME}-snapshot-${PORTVERSION:S/0.0.//}-2245${EXTRACT_SUFX}

MAINTAINER= multimedia@...
-COMMENT?= Multimedia library and tool for encoding H.264/AVC video streams
+COMMENT= Multimedia library and tool for encoding H.264/AVC video streams

BUILD_DEPENDS= yasm>=0.6.0:${PORTSDIR}/devel/yasm

@@ -36,7 +36,7 @@

CONFIGURE_ARGS+= --extra-cflags="${CPPFLAGS} ${CFLAGS} -fPIC -I${LOCALBASE}/include -I${LOCALBASE}/include" \
--extra-ldflags="${LDFLAGS} -L${LOCALBASE}/lib -L${LOCALBASE}/lib" \
- --enable-shared
+ --enable-shared --disable-asm

.include <bsd.port.pre.mk>

diff -ruN --exclude=CVS /usr/ports/multimedia/x264/distinfo /home/staff/gslin/work/ports/x264/distinfo
--- /usr/ports/multimedia/x264/distinfo 2009-04-01 03:53:07.000000000 +0800
+++ /home/staff/gslin/work/ports/x264/distinfo 2009-11-26 00:03:47.000000000 +0800
@@ -1,6 +1,3 @@
-MD5 (x264/x264-snapshot-20081218-2245.tar.bz2) = a5034835110bf3302539648323c73517
-SHA256 (x264/x264-snapshot-20081218-2245.tar.bz2) = 729fbdd18d4e84980fb8533cdf60379f86728e950277370c226486d2a7857167
-SIZE (x264/x264-snapshot-20081218-2245.tar.bz2) = 2336724
-MD5 (x264/example.y4m.bz2) = e0948016cd4a52e75d6a74d998bd6ae6
-SHA256 (x264/example.y4m.bz2) = a5bec9d37362bd9d7773fbd0644643f9ec096d654d20823004e88d5df32bbff7
-SIZE (x264/example.y4m.bz2) = 4910029
+MD5 (x264/x264-snapshot-20091124-2245.tar.bz2) = 1b67c69c1a6456e3101d9be7ad2cdbdf
+SHA256 (x264/x264-snapshot-20091124-2245.tar.bz2) = c7e25b7c1e49c73ed2c0e51e5f35ec0d881bf5b3886c38c74fe5932510e4ce83
+SIZE (x264/x264-snapshot-20091124-2245.tar.bz2) = 375385
diff -ruN --exclude=CVS /usr/ports/multimedia/x264/pkg-plist /home/staff/gslin/work/ports/x264/pkg-plist
--- /usr/ports/multimedia/x264/pkg-plist 2009-03-31 21:58:17.000000000 +0800
+++ /home/staff/gslin/work/ports/x264/pkg-plist 2009-11-26 00:09:26.000000000 +0800
@@ -1,6 +1,7 @@
+@comment $FreeBSD$
bin/x264
include/x264.h
lib/libx264.a
lib/libx264.so
-lib/libx264.so.65
+lib/libx264.so.79
libdata/pkgconfig/x264.pc
--- x264-0.0.20091124.patch ends here ---

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: Pointers to debug lack-of-audio

2009-11-23T13:58:26Z

Joe Greco wrote:

>>> But that's also getting "Unable to trace" messages.
>> That what you have configured still require two DACs. Only one seq=15
>> can share DAC with others. You'll have to disable one of them.
>
> I don't see two seq=15... am I misreading this? And it isn't clear to me
> what it is that requires two DACs. There's only one outbound association,
> with all the enabled outputs thrown into it. Is that supposed to work? I
> do not paricularly care about headphone jack functionality (nice to have
> but definitely optional)...
>
>> How much
>> connectors do you have on case? May be some of configured nids is fake?
>
> Possible, I suppose. There's a blue and green line in/out on the rear.
> There's a headphone and mic on the front. Those are all represented as
> nid 16, 19, 20, 21. There's what appears to be a CD input on the system
> board, I've been assuming that to be nid 15 / AUX. You suggest nid 17
> was the speaker. That appears to account for all non-disabled nid's.
>
>> Looking on codec datasheet, nid 17 is mono out, so it is a good
>> candidate to be used for speaker.
>>
>>> Am I supposed to
>>> be trying to figure this out before trying to play with gpio signals?
>> Better solve all possible problems before, as there is quite large
>> number of combinations.
>
> :-)
>
> So I think I'm a little lost on what is requiring two DAC's. I thought
> by throwing everything in association 0, that'd put the same outputs on
> everything.

You have configured 4.0 channels (quadro) output with additional stereo
redirection output. To handle this 4.0 setup driver needs 2 DACs. As
soon as you have only one DAC, all you can setup is one stereo output
with additional stereo redirection. It is impossible to make all 3
outputs work, so you should choose which one to disable.

> Am I better off disabling everything and then just walking
> through one nid at a time trying to establish what's what? I can do
> that without toooo much pain.

OK.

--
Alexander Motin
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: Pointers to debug lack-of-audio

2009-11-23T13:50:34Z

> > Okay, so ... I'm trying, then, to get rid of what's currently listed as
> > "Association 1 (2)"? That's simply "Pin nid=17 seq=0" which maps to
> > "nid 17 0x9707e120 as 2 seq 0 Line-out Fixed jack 7 loc 23 color
> > White misc 1"
> >
> > So would this be
> >
> > hint.hdac.0.cad0.nid17.config="as=1 seq=1 device=Line-out"
> >
> > ? I'm kind of guessing here. This gets me another nonfunctional config,
> >
> > hdac0: [MPSAFE]
> > hdac0: [ITHREAD]
> > hdac0: Probing codec #0...
> > hdac0: HDA Codec #0: Realtek ALC260
> > hdac0: HDA Codec ID: 0x10ec0260
> > hdac0: Vendor: 0x10ec
> > hdac0: Device: 0x0260
> > hdac0: Revision: 0x04
> > hdac0: Stepping: 0x00
> > hdac0: PCI Subvendor: 0x3011103c
> > hdac0: Found audio FG nid=1 startnode=2 endnode=28 total=26
> > hdac0:
> > hdac0: Processing audio FG cad=0 nid=1...
> > hdac0: GPIO: 0x40000004 NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
> > hdac0: nid 15 0x9993e133 as 3 seq 3 AUX Fixed jack 3 loc 25 color White misc 1
> > hdac0: nid 16 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
> > hdac0: nid 17 0x9707e120 as 2 seq 0 Line-out Fixed jack 7 loc 23 color White misc 1
> > hdac0: Patching pin config nid=17 0x9707e120 -> 0x9707e111
> > hdac0: nid 18 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> > hdac0: nid 19 0x02a11930 as 3 seq 0 Mic Jack jack 1 loc 2 color Black misc 9
> > hdac0: nid 20 0x01813c31 as 3 seq 1 Line-in Jack jack 1 loc 1 color Blue misc 12
> > hdac0: nid 21 0x01014c10 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 12
> > hdac0: nid 22 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> > hdac0: Patching widget caps nid=23 0x00400000 -> 0x00700000
> > hdac0: nid 24 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> > hdac0: nid 25 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> > hdac0: Patched pins configuration:
> > hdac0: nid 15 0x9993e133 as 3 seq 3 AUX Fixed jack 3 loc 25 color White misc 1
> > hdac0: nid 16 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
> > hdac0: nid 17 0x9707e111 as 1 seq 1 Line-out Fixed jack 7 loc 23 color White misc 1
> > hdac0: nid 18 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> > hdac0: nid 19 0x02a11930 as 3 seq 0 Mic Jack jack 1 loc 2 color Black misc 9
> > hdac0: nid 20 0x01813c31 as 3 seq 1 Line-in Jack jack 1 loc 1 color Blue misc 12
> > hdac0: nid 21 0x01014c10 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 12
> > hdac0: nid 22 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> > hdac0: nid 24 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> > hdac0: nid 25 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> > hdac0: 2 associations found:
> > hdac0: Association 0 (1) out:
> > hdac0: Pin nid=21 seq=0
> > hdac0: Pin nid=17 seq=1
> > hdac0: Pin nid=16 seq=15
> > hdac0: Association 1 (3) in:
> > hdac0: Pin nid=19 seq=0
> > hdac0: Pin nid=20 seq=1
> > hdac0: Pin nid=15 seq=3
> > hdac0: Tracing association 0 (1)
> > hdac0: Pin 21 traced to DAC 2
> > hdac0: Unable to trace pin 17 seq 1 with min nid 0
> > hdac0: Unable to trace pin 21 seq 0 with min nid 3
> > hdac0: Pin 21 traced to DAC 2 with fake redirection
> > hdac0: Unable to trace pin 17 seq 1 with min nid 0
> > hdac0: Unable to trace pin 21 seq 0 with min nid 3
> > hdac0: Association 0 (1) trace failed
> > hdac0: Tracing association 1 (3)
> > hdac0: Pin 19 traced to ADC 4
> > hdac0: Pin 20 traced to ADC 4
> > hdac0: Pin 15 traced to ADC 4
> > hdac0: Association 1 (3) trace succeeded
> > hdac0: Tracing input monitor
> > hdac0: Tracing beeper
> > hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
> >
> > But that's also getting "Unable to trace" messages.
>
> That what you have configured still require two DACs. Only one seq=15
> can share DAC with others. You'll have to disable one of them.

I don't see two seq=15... am I misreading this? And it isn't clear to me
what it is that requires two DACs. There's only one outbound association,
with all the enabled outputs thrown into it. Is that supposed to work? I
do not paricularly care about headphone jack functionality (nice to have
but definitely optional)...

> How much
> connectors do you have on case? May be some of configured nids is fake?

Possible, I suppose. There's a blue and green line in/out on the rear.
There's a headphone and mic on the front. Those are all represented as
nid 16, 19, 20, 21. There's what appears to be a CD input on the system
board, I've been assuming that to be nid 15 / AUX. You suggest nid 17
was the speaker. That appears to account for all non-disabled nid's.

> Looking on codec datasheet, nid 17 is mono out, so it is a good
> candidate to be used for speaker.
>
> > Am I supposed to
> > be trying to figure this out before trying to play with gpio signals?
>
> Better solve all possible problems before, as there is quite large
> number of combinations.

:-)

So I think I'm a little lost on what is requiring two DAC's. I thought
by throwing everything in association 0, that'd put the same outputs on
everything. Am I better off disabling everything and then just walking
through one nid at a time trying to establish what's what? I can do
that without toooo much pain.

Thanks for any further insight.

... JG
--
Joe Greco - sol.net Network Services - Milwaukee, WI - http://www.sol.net
"We call it the 'one bite at the apple' rule. Give me one chance [and] then I
won't contact you again." - Direct Marketing Ass'n position on e-mail spam(CNN)
With 24 million small businesses in the US alone, that's way too many apples.
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: Call for Testers: MythTV 0.22 (Trial 2)

2009-11-23T12:31:48Z

On Mon, 23 Nov 2009 21:16:55 +0100 (CET)
Bernhard Froehlich <decke@...> wrote:

> I've had a quick look at the code and this message is from
> SetupRecorder in libs/libmythtv/tv_rec.cpp and is only displayed when
> ivtv was not enabled correctly. But your config has IVTV enabled so
> there is something wrong.

I tried a scheduled recording, that resulted in this
in /var/log/mythbackend.log:
2009-11-23 19:52:00.617 Reschedule requested for id 0.
2009-11-23 19:52:00.640 Scheduled 1 items in 0.0 = 0.00 match + 0.02 place
2009-11-23 19:52:29.956 TVRec(2): ASK_RECORDING 2 29 0 0
2009-11-23 19:53:01.755 TVRec(2): Changing from None to Watching RecordingOnly
2009-11-23 19:53:01.760 TVRec(2): HW Tuner: 2->2
2009-11-23 19:53:01.941 TVRec(2) Error: Need MPEG recorder, but compiled without MPEG support!
2009-11-23 19:53:01.942 TVRec(2) Error: Failed to start recorder!
Tuning request was Program(yes) channel(6) input(Tuner 0) flags(Recording,)

2009-11-23 19:53:01.948 Finished recording Siste nytt fra P4: channel 6
2009-11-23 19:53:01.962 TVRec(2): Changing from Watching RecordingOnly to None

and then mythbackend crashed (core dump). From /var/log/messages:
Nov 23 19:53:01 kg-quiet kernel: before tuner_command!
Nov 23 19:53:01 kg-quiet kernel: tuner: tv freq set to 168.25
Nov 23 19:53:01 kg-quiet kernel: tuner: tv 0x0c 0xf3 0x8e 0x02
Nov 23 19:53:02 kg-quiet kernel: pid 57753 (mythbackend), uid 0: exited on signal 11 (core dumped)

The core dump is available, if needed I can run commands on it (if somebody tells me what to run).

> You could try to remove the ifdef USING_IVTV and endif in tv_rec.cpp
> at around line 989 and see if it helps. I'll try to have a look at it.

I'll wait until usleep has said if this issue is driver related or not.

--
Torfinn

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: Call for Testers: MythTV 0.22 (Trial 2)

2009-11-23T12:16:55Z

On Mon, November 23, 2009 7:48 pm, Torfinn Ingolfsen wrote:

> On Mon, 23 Nov 2009 12:45:03 +0100 (CET)
> Bernhard Froehlich <decke@...> wrote:
>
>> There were some problems with the first call for testers but that
>> compile problems should be fixed now and x11 and ivtv should be
>> working.
>
> I donwloaded the new cft, and did a clean make install.
>
> Ok, I can now watch recordings that I did previously (with the first
> 0.22 cft) - this is good.
> But when I try to "watch TV", it just stays on the "please wait" screen
> a bit, and thenm returns to the menu.
> In /var/log/mythbackend.log I see this:
> 2009-11-23 19:23:21.478 TVRec(2): Changing from None to Watching
> WatchingLiveTV
> 2009-11-23 19:23:21.485 TVRec(2): HW Tuner: 2->2
> 2009-11-23 19:23:21.702 TVRec(2) Error: Need MPEG recorder, but compiled
> without MPEG support!
> 2009-11-23 19:23:21.704 TVRec(2) Error: Failed to start recorder!
> Tuning request was Program(no) channel(1) input(Tuner 0)
> flags(LiveTV,)
>
> 2009-11-23 19:23:21.711 Finished recording Dagsrevyen: channel 1
> 2009-11-23 19:23:21.714 TVRec(2): Changing from Watching WatchingLiveTV to
> None
>
> mythfrontend -w -v record' doesn't say anything about missing mpeg:
> 2009-11-23 19:34:28.537 TV: Attempting to change from None to Watching
> WatchingLiveTV
> 2009-11-23 19:34:28.539 MythContext: Connecting to backend server:
> 10.1.150.8:6543 (try 1 of 1)
> 2009-11-23 19:34:28.540 Using protocol version 50
> 2009-11-23 19:34:28.543 Spawning LiveTV Recorder -- begin
> 2009-11-23 19:34:28.780 Spawning LiveTV Recorder -- end
> 2009-11-23 19:34:28.794 We have a
> playbackURL(/d3/mythtv/video/1_20091123193428.mpg) & cardtype(MPEG)
> 2009-11-23 19:34:35.295 RingBuf(/d3/mythtv/video/1_20091123193428.mpg):
> Invalid file (fd -1) when opening '/d3/mythtv/video/1_20091123193428.mpg'.
> 2009-11-23 19:34:35.296 We have a RingBuffer
> 2009-11-23 19:35:15.349 TV Error: StartRecorder() -- timed out waiting for
> recorder to start
> 2009-11-23 19:35:15.349 TV Error: LiveTV not successfully started
> 2009-11-23 19:35:15.353 ScreenSaverX11Private: DPMS Deactivated 1
> 2009-11-23 19:35:15.354 ScreenSaverX11Private: DPMS Reactivated 1
>
> But it makes sense, the frontend doesn't have a recording device
> (PVR-350).
> Anyway, config.ep is attached.
>

I've had a quick look at the code and this message is from SetupRecorder
in libs/libmythtv/tv_rec.cpp and is only displayed when ivtv was not
enabled correctly. But your config has IVTV enabled so there is something
wrong.

You could try to remove the ifdef USING_IVTV and endif in tv_rec.cpp at
around line 989 and see if it helps. I'll try to have a look at it.

--
Bernhard Fröhlich
http://www.bluelife.at/

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: Call for Testers: MythTV 0.22 (Trial 2)

2009-11-23T10:48:17Z

On Mon, 23 Nov 2009 12:45:03 +0100 (CET)
Bernhard Froehlich <decke@...> wrote:

> There were some problems with the first call for testers but that
> compile problems should be fixed now and x11 and ivtv should be
> working.

I donwloaded the new cft, and did a clean make install.

Ok, I can now watch recordings that I did previously (with the first
0.22 cft) - this is good.
But when I try to "watch TV", it just stays on the "please wait" screen
a bit, and thenm returns to the menu.
In /var/log/mythbackend.log I see this:
2009-11-23 19:23:21.478 TVRec(2): Changing from None to Watching WatchingLiveTV
2009-11-23 19:23:21.485 TVRec(2): HW Tuner: 2->2
2009-11-23 19:23:21.702 TVRec(2) Error: Need MPEG recorder, but compiled without MPEG support!
2009-11-23 19:23:21.704 TVRec(2) Error: Failed to start recorder!
Tuning request was Program(no) channel(1) input(Tuner 0) flags(LiveTV,)

2009-11-23 19:23:21.711 Finished recording Dagsrevyen: channel 1
2009-11-23 19:23:21.714 TVRec(2): Changing from Watching WatchingLiveTV to None

mythfrontend -w -v record' doesn't say anything about missing mpeg:
2009-11-23 19:34:28.537 TV: Attempting to change from None to Watching WatchingLiveTV
2009-11-23 19:34:28.539 MythContext: Connecting to backend server: 10.1.150.8:6543 (try 1 of 1)
2009-11-23 19:34:28.540 Using protocol version 50
2009-11-23 19:34:28.543 Spawning LiveTV Recorder -- begin
2009-11-23 19:34:28.780 Spawning LiveTV Recorder -- end
2009-11-23 19:34:28.794 We have a playbackURL(/d3/mythtv/video/1_20091123193428.mpg) & cardtype(MPEG)
2009-11-23 19:34:35.295 RingBuf(/d3/mythtv/video/1_20091123193428.mpg): Invalid file (fd -1) when opening '/d3/mythtv/video/1_20091123193428.mpg'.
2009-11-23 19:34:35.296 We have a RingBuffer
2009-11-23 19:35:15.349 TV Error: StartRecorder() -- timed out waiting for recorder to start
2009-11-23 19:35:15.349 TV Error: LiveTV not successfully started
2009-11-23 19:35:15.353 ScreenSaverX11Private: DPMS Deactivated 1
2009-11-23 19:35:15.354 ScreenSaverX11Private: DPMS Reactivated 1

But it makes sense, the frontend doesn't have a recording device (PVR-350).
Anyway, config.ep is attached.

HTH
--
Regards,
Torfinn Ingolfsen

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

config.ep (145K) Download Attachment

Re: Pointers to debug lack-of-audio

2009-11-23T09:02:51Z

Joe Greco wrote:

>>> hdac0: Processing audio FG cad=0 nid=1...
>>> hdac0: GPIO: 0x40000004 NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
>>> hdac0: nid 15 0x9993e133 as 3 seq 3 AUX Fixed jack 3 loc 25 color White misc 1
>>> hdac0: nid 16 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
>>> hdac0: nid 17 0x9707e120 as 2 seq 0 Line-out Fixed jack 7 loc 23 color White misc 1
>>> hdac0: nid 18 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
>>> hdac0: nid 19 0x02a11930 as 3 seq 0 Mic Jack jack 1 loc 2 color Black misc 9
>>> hdac0: nid 20 0x01813c31 as 3 seq 1 Line-in Jack jack 1 loc 1 color Blue misc 12
>>> hdac0: nid 21 0x01014c10 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 12
>>> hdac0: nid 22 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
>>> hdac0: Patching widget caps nid=23 0x00400000 -> 0x00700000
>>> hdac0: nid 24 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
>>> hdac0: nid 25 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
>>> hdac0: Patched pins configuration:
>>> hdac0: nid 15 0x9993e133 as 3 seq 3 AUX Fixed jack 3 loc 25 color White misc 1
>>> hdac0: nid 16 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
>>> hdac0: nid 17 0x9707e120 as 2 seq 0 Line-out Fixed jack 7 loc 23 color White misc 1
>>> hdac0: nid 18 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
>>> hdac0: nid 19 0x02a11930 as 3 seq 0 Mic Jack jack 1 loc 2 color Black misc 9
>>> hdac0: nid 20 0x01813c31 as 3 seq 1 Line-in Jack jack 1 loc 1 color Blue misc 12
>>> hdac0: nid 21 0x01014c10 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 12
>>> hdac0: nid 22 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
>>> hdac0: nid 24 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
>>> hdac0: nid 25 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
>>> hdac0: 3 associations found:
>>> hdac0: Association 0 (1) out:
>>> hdac0: Pin nid=21 seq=0
>>> hdac0: Pin nid=16 seq=15
>>> hdac0: Association 1 (2) out:
>>> hdac0: Pin nid=17 seq=0
>>> hdac0: Association 2 (3) in:
>>> hdac0: Pin nid=19 seq=0
>>> hdac0: Pin nid=20 seq=1
>>> hdac0: Pin nid=15 seq=3
>>> hdac0: Tracing association 0 (1)
>>> hdac0: Pin 21 traced to DAC 2
>>> hdac0: Pin 16 traced to DAC 2 and hpredir 0
>>> hdac0: Association 0 (1) trace succeeded
>>> hdac0: Tracing association 1 (2)
>>> hdac0: Unable to trace pin 17 seq 0 with min nid 0
>>> hdac0: Association 1 (2) trace failed
>> Here is at least one bug in codec configuration ^^^. This codec has only
>> one DAC, so it is unable to manage two playback devices.
>>
>>> hdac0: Tracing association 2 (3)
>>> hdac0: Pin 19 traced to ADC 4
>>> hdac0: Pin 20 traced to ADC 4
>>> hdac0: Pin 15 traced to ADC 4
>>> hdac0: Association 2 (3) trace succeeded
>>> hdac0: Tracing input monitor
>>> hdac0: Tracing beeper
>>> hdac0: nid 23 traced to out
>>> hdac0: Enabling headphone/speaker audio routing switching:
>>> hdac0: as=0 sense nid=16 [UNSOL]
>>> hdac0: Pin sense: nid=16 res=0x7fffffff
>>> hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
>>> I saw some mention of unmapped or incorrectly mapped audio outputs
>>> with snd_hda, but I'm not sure how to tell what they ought to be.
>>> I see some things are listed as [DISABLED] but haven't figured out
>>> whether that's reasonable or not.
>> Speakers sometimes controlled with setting GPIO signals. You may need to
>> experiment with them. Same time, your output connector configured for
>> automatic audio redirection, with default to speaker, but if it is
>> incapable of signaling jack presence, it won't ever receive any sound.
>
>
> Okay, so ... I'm trying, then, to get rid of what's currently listed as
> "Association 1 (2)"? That's simply "Pin nid=17 seq=0" which maps to
> "nid 17 0x9707e120 as 2 seq 0 Line-out Fixed jack 7 loc 23 color
> White misc 1"
>
> So would this be
>
> hint.hdac.0.cad0.nid17.config="as=1 seq=1 device=Line-out"
>
> ? I'm kind of guessing here. This gets me another nonfunctional config,
>
> hdac0: [MPSAFE]
> hdac0: [ITHREAD]
> hdac0: Probing codec #0...
> hdac0: HDA Codec #0: Realtek ALC260
> hdac0: HDA Codec ID: 0x10ec0260
> hdac0: Vendor: 0x10ec
> hdac0: Device: 0x0260
> hdac0: Revision: 0x04
> hdac0: Stepping: 0x00
> hdac0: PCI Subvendor: 0x3011103c
> hdac0: Found audio FG nid=1 startnode=2 endnode=28 total=26
> hdac0:
> hdac0: Processing audio FG cad=0 nid=1...
> hdac0: GPIO: 0x40000004 NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
> hdac0: nid 15 0x9993e133 as 3 seq 3 AUX Fixed jack 3 loc 25 color White misc 1
> hdac0: nid 16 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
> hdac0: nid 17 0x9707e120 as 2 seq 0 Line-out Fixed jack 7 loc 23 color White misc 1
> hdac0: Patching pin config nid=17 0x9707e120 -> 0x9707e111
> hdac0: nid 18 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> hdac0: nid 19 0x02a11930 as 3 seq 0 Mic Jack jack 1 loc 2 color Black misc 9
> hdac0: nid 20 0x01813c31 as 3 seq 1 Line-in Jack jack 1 loc 1 color Blue misc 12
> hdac0: nid 21 0x01014c10 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 12
> hdac0: nid 22 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> hdac0: Patching widget caps nid=23 0x00400000 -> 0x00700000
> hdac0: nid 24 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> hdac0: nid 25 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> hdac0: Patched pins configuration:
> hdac0: nid 15 0x9993e133 as 3 seq 3 AUX Fixed jack 3 loc 25 color White misc 1
> hdac0: nid 16 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
> hdac0: nid 17 0x9707e111 as 1 seq 1 Line-out Fixed jack 7 loc 23 color White misc 1
> hdac0: nid 18 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> hdac0: nid 19 0x02a11930 as 3 seq 0 Mic Jack jack 1 loc 2 color Black misc 9
> hdac0: nid 20 0x01813c31 as 3 seq 1 Line-in Jack jack 1 loc 1 color Blue misc 12
> hdac0: nid 21 0x01014c10 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 12
> hdac0: nid 22 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> hdac0: nid 24 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> hdac0: nid 25 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> hdac0: 2 associations found:
> hdac0: Association 0 (1) out:
> hdac0: Pin nid=21 seq=0
> hdac0: Pin nid=17 seq=1
> hdac0: Pin nid=16 seq=15
> hdac0: Association 1 (3) in:
> hdac0: Pin nid=19 seq=0
> hdac0: Pin nid=20 seq=1
> hdac0: Pin nid=15 seq=3
> hdac0: Tracing association 0 (1)
> hdac0: Pin 21 traced to DAC 2
> hdac0: Unable to trace pin 17 seq 1 with min nid 0
> hdac0: Unable to trace pin 21 seq 0 with min nid 3
> hdac0: Pin 21 traced to DAC 2 with fake redirection
> hdac0: Unable to trace pin 17 seq 1 with min nid 0
> hdac0: Unable to trace pin 21 seq 0 with min nid 3
> hdac0: Association 0 (1) trace failed
> hdac0: Tracing association 1 (3)
> hdac0: Pin 19 traced to ADC 4
> hdac0: Pin 20 traced to ADC 4
> hdac0: Pin 15 traced to ADC 4
> hdac0: Association 1 (3) trace succeeded
> hdac0: Tracing input monitor
> hdac0: Tracing beeper
> hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
>
> But that's also getting "Unable to trace" messages.

That what you have configured still require two DACs. Only one seq=15
can share DAC with others. You'll have to disable one of them. How much
connectors do you have on case? May be some of configured nids is fake?

Looking on codec datasheet, nid 17 is mono out, so it is a good
candidate to be used for speaker.

> Am I supposed to
> be trying to figure this out before trying to play with gpio signals?

Better solve all possible problems before, as there is quite large
number of combinations.

--
Alexander Motin
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: Call for Testers: MythTV 0.22 (Trial 2)

2009-11-23T08:40:13Z

On Mon, 23 Nov 2009 12:45:03 +0100 (CET)
Bernhard Froehlich <decke@...> wrote:

> There were some problems with the first call for testers but that
> compile problems should be fixed now and x11 and ivtv should be
> working.
> [...]
> Testing it:

Still compiling.
Anyway, it looks like parts of MythTV 0.22 now uses
(or want to use) svn:
sh "/usr/ports/multimedia/mythtv/work/mythtv-0.22/version.sh" "/usr/ports/multimedia/mythtv/work/mythtv-0.22" ": http://svn.mythtv.org/svn/tags/release-0-22/mythtv/version.pro "
svnversion: not found

I don't know how that could affect things.
--
Regards,
Torfinn Ingolfsen

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: Pointers to debug lack-of-audio

2009-11-23T08:22:09Z

> > hdac0: Processing audio FG cad=0 nid=1...
> > hdac0: GPIO: 0x40000004 NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
> > hdac0: nid 15 0x9993e133 as 3 seq 3 AUX Fixed jack 3 loc 25 color White misc 1
> > hdac0: nid 16 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
> > hdac0: nid 17 0x9707e120 as 2 seq 0 Line-out Fixed jack 7 loc 23 color White misc 1
> > hdac0: nid 18 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> > hdac0: nid 19 0x02a11930 as 3 seq 0 Mic Jack jack 1 loc 2 color Black misc 9
> > hdac0: nid 20 0x01813c31 as 3 seq 1 Line-in Jack jack 1 loc 1 color Blue misc 12
> > hdac0: nid 21 0x01014c10 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 12
> > hdac0: nid 22 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> > hdac0: Patching widget caps nid=23 0x00400000 -> 0x00700000
> > hdac0: nid 24 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> > hdac0: nid 25 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> > hdac0: Patched pins configuration:
> > hdac0: nid 15 0x9993e133 as 3 seq 3 AUX Fixed jack 3 loc 25 color White misc 1
> > hdac0: nid 16 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
> > hdac0: nid 17 0x9707e120 as 2 seq 0 Line-out Fixed jack 7 loc 23 color White misc 1
> > hdac0: nid 18 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> > hdac0: nid 19 0x02a11930 as 3 seq 0 Mic Jack jack 1 loc 2 color Black misc 9
> > hdac0: nid 20 0x01813c31 as 3 seq 1 Line-in Jack jack 1 loc 1 color Blue misc 12
> > hdac0: nid 21 0x01014c10 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 12
> > hdac0: nid 22 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> > hdac0: nid 24 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> > hdac0: nid 25 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> > hdac0: 3 associations found:
> > hdac0: Association 0 (1) out:
> > hdac0: Pin nid=21 seq=0
> > hdac0: Pin nid=16 seq=15
> > hdac0: Association 1 (2) out:
> > hdac0: Pin nid=17 seq=0
> > hdac0: Association 2 (3) in:
> > hdac0: Pin nid=19 seq=0
> > hdac0: Pin nid=20 seq=1
> > hdac0: Pin nid=15 seq=3
> > hdac0: Tracing association 0 (1)
> > hdac0: Pin 21 traced to DAC 2
> > hdac0: Pin 16 traced to DAC 2 and hpredir 0
> > hdac0: Association 0 (1) trace succeeded
> > hdac0: Tracing association 1 (2)
> > hdac0: Unable to trace pin 17 seq 0 with min nid 0
> > hdac0: Association 1 (2) trace failed
>
> Here is at least one bug in codec configuration ^^^. This codec has only
> one DAC, so it is unable to manage two playback devices.
>
> > hdac0: Tracing association 2 (3)
> > hdac0: Pin 19 traced to ADC 4
> > hdac0: Pin 20 traced to ADC 4
> > hdac0: Pin 15 traced to ADC 4
> > hdac0: Association 2 (3) trace succeeded
> > hdac0: Tracing input monitor
> > hdac0: Tracing beeper
> > hdac0: nid 23 traced to out
> > hdac0: Enabling headphone/speaker audio routing switching:
> > hdac0: as=0 sense nid=16 [UNSOL]
> > hdac0: Pin sense: nid=16 res=0x7fffffff
> > hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
>
> > I saw some mention of unmapped or incorrectly mapped audio outputs
> > with snd_hda, but I'm not sure how to tell what they ought to be.
> > I see some things are listed as [DISABLED] but haven't figured out
> > whether that's reasonable or not.
>
> Speakers sometimes controlled with setting GPIO signals. You may need to
> experiment with them. Same time, your output connector configured for
> automatic audio redirection, with default to speaker, but if it is
> incapable of signaling jack presence, it won't ever receive any sound.

Okay, so ... I'm trying, then, to get rid of what's currently listed as
"Association 1 (2)"? That's simply "Pin nid=17 seq=0" which maps to
"nid 17 0x9707e120 as 2 seq 0 Line-out Fixed jack 7 loc 23 color
White misc 1"

So would this be

hint.hdac.0.cad0.nid17.config="as=1 seq=1 device=Line-out"

? I'm kind of guessing here. This gets me another nonfunctional config,

hdac0: [MPSAFE]
hdac0: [ITHREAD]
hdac0: Probing codec #0...
hdac0: HDA Codec #0: Realtek ALC260
hdac0: HDA Codec ID: 0x10ec0260
hdac0: Vendor: 0x10ec
hdac0: Device: 0x0260
hdac0: Revision: 0x04
hdac0: Stepping: 0x00
hdac0: PCI Subvendor: 0x3011103c
hdac0: Found audio FG nid=1 startnode=2 endnode=28 total=26
hdac0:
hdac0: Processing audio FG cad=0 nid=1...
hdac0: GPIO: 0x40000004 NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
hdac0: nid 15 0x9993e133 as 3 seq 3 AUX Fixed jack 3 loc 25 color White misc 1
hdac0: nid 16 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
hdac0: nid 17 0x9707e120 as 2 seq 0 Line-out Fixed jack 7 loc 23 color White misc 1
hdac0: Patching pin config nid=17 0x9707e120 -> 0x9707e111
hdac0: nid 18 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
hdac0: nid 19 0x02a11930 as 3 seq 0 Mic Jack jack 1 loc 2 color Black misc 9
hdac0: nid 20 0x01813c31 as 3 seq 1 Line-in Jack jack 1 loc 1 color Blue misc 12
hdac0: nid 21 0x01014c10 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 12
hdac0: nid 22 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
hdac0: Patching widget caps nid=23 0x00400000 -> 0x00700000
hdac0: nid 24 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
hdac0: nid 25 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
hdac0: Patched pins configuration:
hdac0: nid 15 0x9993e133 as 3 seq 3 AUX Fixed jack 3 loc 25 color White misc 1
hdac0: nid 16 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
hdac0: nid 17 0x9707e111 as 1 seq 1 Line-out Fixed jack 7 loc 23 color White misc 1
hdac0: nid 18 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
hdac0: nid 19 0x02a11930 as 3 seq 0 Mic Jack jack 1 loc 2 color Black misc 9
hdac0: nid 20 0x01813c31 as 3 seq 1 Line-in Jack jack 1 loc 1 color Blue misc 12
hdac0: nid 21 0x01014c10 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 12
hdac0: nid 22 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
hdac0: nid 24 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
hdac0: nid 25 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
hdac0: 2 associations found:
hdac0: Association 0 (1) out:
hdac0: Pin nid=21 seq=0
hdac0: Pin nid=17 seq=1
hdac0: Pin nid=16 seq=15
hdac0: Association 1 (3) in:
hdac0: Pin nid=19 seq=0
hdac0: Pin nid=20 seq=1
hdac0: Pin nid=15 seq=3
hdac0: Tracing association 0 (1)
hdac0: Pin 21 traced to DAC 2
hdac0: Unable to trace pin 17 seq 1 with min nid 0
hdac0: Unable to trace pin 21 seq 0 with min nid 3
hdac0: Pin 21 traced to DAC 2 with fake redirection
hdac0: Unable to trace pin 17 seq 1 with min nid 0
hdac0: Unable to trace pin 21 seq 0 with min nid 3
hdac0: Association 0 (1) trace failed
hdac0: Tracing association 1 (3)
hdac0: Pin 19 traced to ADC 4
hdac0: Pin 20 traced to ADC 4
hdac0: Pin 15 traced to ADC 4
hdac0: Association 1 (3) trace succeeded
hdac0: Tracing input monitor
hdac0: Tracing beeper
hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref

But that's also getting "Unable to trace" messages. Am I supposed to
be trying to figure this out before trying to play with gpio signals?

... JG
--
Joe Greco - sol.net Network Services - Milwaukee, WI - http://www.sol.net
"We call it the 'one bite at the apple' rule. Give me one chance [and] then I
won't contact you again." - Direct Marketing Ass'n position on e-mail spam(CNN)
With 24 million small businesses in the US alone, that's way too many apples.
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Call for Testers: MythTV 0.22 (Trial 2)

2009-11-23T03:45:03Z

There were some problems with the first call for testers but that compile
problems should be fixed now and x11 and ivtv should be working.

I've already tested mythtv-frontend and watched some livetv and recordings
on FreeBSD 8.0/amd64 playing content from an mythtv 0.22 backend running
on linux.

Changes since first cft:
mythtv:
- improved mythbackend startscript (patch from Torfinn Ingolfsen)
- enabled ivtv
- fixed build failures

mythtv-frontend:
- fixed DESKTOP_ENTRIES

Download:
- http://home.bluelife.at/ports/mythtv-0.22-20091123.tar.gz

Testing it:

# cd /tmp
# fetch http://home.bluelife.at/ports/mythtv-0.22-20091123.tar.gz
# cd /usr/ports/multimedia
# tar xvf /tmp/mythtv-0.22-20091123.tar.gz
# cd mythtv && make install

Thanks!

--
Bernhard Fröhlich
http://www.bluelife.at/

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Current problem reports assigned to freebsd-multimedia@FreeBSD.org

2009-11-23T03:06:59Z

Note: to view an individual PR, use:
http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.

S Tracker Resp. Description
--------------------------------------------------------------------------------
o kern/140591 multimedia [PATCH][sound] No sound output on lineout/headphone ja
o kern/140453 multimedia [sound] No sound inside Virtualbox on 50% volume
o ports/139071 multimedia multimedia/x264 does not link on 8-RC1
o ports/138386 multimedia multimedia/mkvtoolnix lacks the Qt-Gui and configure-k
o ports/138213 multimedia Apply SqueezeCenter patches to audio/faad that enable
o kern/137589 multimedia [snd_uaudio] snd_uaudio.ko (USB audio driver) doesn't
o kern/134767 multimedia [sound] [snd_hda] [regression] Sigmatel STAC9205X no s
o ports/133462 multimedia multimedia/x264 build fails on powerpc
o kern/132848 multimedia [sound] [snd_emu10kx] driver problem with card init, s
o kern/132511 multimedia [sound] [snd_hda] Probing ALC888 codec on ASRock K10N7
o kern/129604 multimedia [sound] Sound stops with error: pcm0:virtual:dsp0.vp0:
o kern/127131 multimedia [bktr] /usr/src/sys/dev/bktr/bktr_os.c, line 469: wron
o ports/127084 multimedia multimedia/linux-realplayer is vulnerable
s kern/125756 multimedia [sound] [patch] cannot detect soft-modem on HDA bus
o kern/124319 multimedia [sound] [snd_emu10k1] [regression] Cannot record from
o kern/122086 multimedia [sound] maestro sound driver is working, but mixer ini
p kern/121156 multimedia [sound] [patch] Turn on inverted external amplifier se
o kern/120857 multimedia [sound] [snd_emu10k1] snd_emu10k1 driver issues a warn
o kern/120780 multimedia [sound] [snd_hda] snd_hda doesn't work on Dell Latitut
o kern/119973 multimedia [sound] [snd_maestro] [regression] snd_maestro only wo
o kern/119931 multimedia [sound] No sound card detected on ASUS "K8V-X SE R2.00
o kern/119759 multimedia [sound] [snd_emu10k1] [regression] Can not record anyt
f kern/115666 multimedia [sound] Microphone does not work
o kern/115300 multimedia [sound] [snd_hda] [regression] snd_hda(4) fails to att
o kern/114760 multimedia [sound] [snd_cmi] snd_cmi driver causing sporadic syst
s kern/113950 multimedia [sound] [patch] [request] add per-vchan mixer support
o kern/111767 multimedia [sound] ATI SB450 High Definition Audio Controller sou
o kern/107516 multimedia [sound] [snd_emu10k1] - skips, clicks and lag after a
o kern/107051 multimedia [sound] only 2 channels output works for the ALC850 (o
o kern/104874 multimedia [sound] [snd_emu10k1] kldload snd_emu10k1 hangs system
o kern/104626 multimedia [sound] FreeBSD 6.2 does not support SoundBlaster Audi
o kern/101417 multimedia [sound] 4-speakers output not possible on Asus A8V-Del
o kern/100859 multimedia [sound] [snd_ich] snd_ich broken on GIGABYTE 915 syste
o kern/98752 multimedia [sound] Intel ich6 82801 FB - on Packard Bell A8810 la
o kern/98504 multimedia [sound] Sound is distorted with SB Live 5.1
o kern/98496 multimedia [sound] [snd_ich] some functions don't work in my soun
o kern/98167 multimedia [sound] [es137x] [patch] ES1370 mixer volumes incorrec
o kern/97609 multimedia [sound] Load Sound Module - VIA8233 - fails
o kern/97535 multimedia [sound] [snd_mss] doesn't work in 6.0-RELEASE and abov
o kern/96538 multimedia [sound] emu10k1-driver inverts channels
o kern/95086 multimedia [sound] uaudio line in problem with sbdm lx
o kern/94279 multimedia [sound] [snd_neomagic] snd_neomagic crashes on FreeBSD
o kern/93986 multimedia [sound] Acer TravelMate 4652LMi pcm0 channel dead
o kern/92512 multimedia [sound] distorted mono output with emu10k1
o kern/87782 multimedia [sound] snd_t4dwave and pcm0:record:0: record interrup
s kern/83697 multimedia [sound] [snd_mss] [patch] support, docs added for full
o kern/82043 multimedia [sound] snd_emu10k1 - mixer does not work.
o kern/81146 multimedia [sound] Sound isn't working AT ALL for Sis7012 onboard
o kern/80632 multimedia [sound] pcm driver missing support for CMI8738 auxilla
o kern/79912 multimedia [sound] sound broken for 2 VIA chipsets: interrupt sto
o kern/79905 multimedia [sound] sis7018 sound module problem
o kern/79678 multimedia [sound] sound works except recording from any source
f kern/72995 multimedia [sound] Intel ICH2 (82801BA) - sound nearly inaudible
o kern/63204 multimedia [sound] /dev/mixer broken with ESS Maestro-2E (still o
o kern/60677 multimedia [sound] [patch] No reaction of volume controy key on I
s kern/60599 multimedia [bktr] [partial patch] No sound for ATI TV Wonder (ste
o kern/37600 multimedia [sound] [partial patch] t4dwave drive doesn't record.
o kern/23546 multimedia [sound] [snd_csa] [patch] csa DMA-interrupt problem

58 problems total.

_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Re: Pointers to debug lack-of-audio

2009-11-23T00:20:30Z

Joe Greco wrote:

> I've got a bunch of HP dc7600 Small Form Factor PC's. One of them is
> running the latest version of PC-BSD, which is of course based on
> FreeBSD 7.2-STABLE. It appears to load the audio driver, but it's
> mute. The dc7600 sports a built-in speaker, and neither it nor any
> of the jacks seem to produce sound.
>
> I've looked over the saga of the snd_hda driver, and am not quite clear
> where to go. It looks configured. The pin mappings seem to make some
> sort of sense, though I don't know what they ought to be.
>
> # cat /dev/sndstat
> FreeBSD Audio Driver (newpcm: 32bit 2007061600/i386)
> Installed devices:
> pcm0: <HDA Realtek ALC260 PCM #0 Analog> at cad 0 nid 1 on hdac0 kld snd_hda
> [MPSAFE] (1p:1v/1r:1v channels duplex default)
>
> So it probes fine.
>
> Doing a kldunload/reload with verbose logging reveals
>
> hdac0: <Intel 82801G High Definition Audio Controller> mem 0xfc500000-0xfc503fff irq 21 at device 27.0 on pci0
> hdac0: HDA Driver Revision: 20090624_0136
> hdac0: attempting to allocate 1 MSI vectors (1 supported)
> msi: routing MSI IRQ 257 to vector 60
> hdac0: using IRQ 257 for MSI
> msi: Assigning MSI IRQ 257 to local APIC 0
> hdac0: [MPSAFE]
> hdac0: [ITHREAD]
> hdac0: Probing codec #0...
> hdac0: HDA Codec #0: Realtek ALC260
> hdac0: HDA Codec ID: 0x10ec0260
> hdac0: Vendor: 0x10ec
> hdac0: Device: 0x0260
> hdac0: Revision: 0x04
> hdac0: Stepping: 0x00
> hdac0: PCI Subvendor: 0x3011103c
> hdac0: Found audio FG nid=1 startnode=2 endnode=28 total=26
> hdac0:
> hdac0: Processing audio FG cad=0 nid=1...
> hdac0: GPIO: 0x40000004 NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
> hdac0: nid 15 0x9993e133 as 3 seq 3 AUX Fixed jack 3 loc 25 color White misc 1
> hdac0: nid 16 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
> hdac0: nid 17 0x9707e120 as 2 seq 0 Line-out Fixed jack 7 loc 23 color White misc 1
> hdac0: nid 18 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> hdac0: nid 19 0x02a11930 as 3 seq 0 Mic Jack jack 1 loc 2 color Black misc 9
> hdac0: nid 20 0x01813c31 as 3 seq 1 Line-in Jack jack 1 loc 1 color Blue misc 12
> hdac0: nid 21 0x01014c10 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 12
> hdac0: nid 22 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> hdac0: Patching widget caps nid=23 0x00400000 -> 0x00700000
> hdac0: nid 24 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> hdac0: nid 25 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
> hdac0: Patched pins configuration:
> hdac0: nid 15 0x9993e133 as 3 seq 3 AUX Fixed jack 3 loc 25 color White misc 1
> hdac0: nid 16 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
> hdac0: nid 17 0x9707e120 as 2 seq 0 Line-out Fixed jack 7 loc 23 color White misc 1
> hdac0: nid 18 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> hdac0: nid 19 0x02a11930 as 3 seq 0 Mic Jack jack 1 loc 2 color Black misc 9
> hdac0: nid 20 0x01813c31 as 3 seq 1 Line-in Jack jack 1 loc 1 color Blue misc 12
> hdac0: nid 21 0x01014c10 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 12
> hdac0: nid 22 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> hdac0: nid 24 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> hdac0: nid 25 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
> hdac0: 3 associations found:
> hdac0: Association 0 (1) out:
> hdac0: Pin nid=21 seq=0
> hdac0: Pin nid=16 seq=15
> hdac0: Association 1 (2) out:
> hdac0: Pin nid=17 seq=0
> hdac0: Association 2 (3) in:
> hdac0: Pin nid=19 seq=0
> hdac0: Pin nid=20 seq=1
> hdac0: Pin nid=15 seq=3
> hdac0: Tracing association 0 (1)
> hdac0: Pin 21 traced to DAC 2
> hdac0: Pin 16 traced to DAC 2 and hpredir 0
> hdac0: Association 0 (1) trace succeeded
> hdac0: Tracing association 1 (2)
> hdac0: Unable to trace pin 17 seq 0 with min nid 0
> hdac0: Association 1 (2) trace failed

Here is at least one bug in codec configuration ^^^. This codec has only
one DAC, so it is unable to manage two playback devices.

> hdac0: Tracing association 2 (3)
> hdac0: Pin 19 traced to ADC 4
> hdac0: Pin 20 traced to ADC 4
> hdac0: Pin 15 traced to ADC 4
> hdac0: Association 2 (3) trace succeeded
> hdac0: Tracing input monitor
> hdac0: Tracing beeper
> hdac0: nid 23 traced to out
> hdac0: Enabling headphone/speaker audio routing switching:
> hdac0: as=0 sense nid=16 [UNSOL]
> hdac0: Pin sense: nid=16 res=0x7fffffff
> hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref

> I saw some mention of unmapped or incorrectly mapped audio outputs
> with snd_hda, but I'm not sure how to tell what they ought to be.
> I see some things are listed as [DISABLED] but haven't figured out
> whether that's reasonable or not.

Speakers sometimes controlled with setting GPIO signals. You may need to
experiment with them. Same time, your output connector configured for
automatic audio redirection, with default to speaker, but if it is
incapable of signaling jack presence, it won't ever receive any sound.

--
Alexander Motin
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

Pointers to debug lack-of-audio

2009-11-22T18:24:48Z

I've got a bunch of HP dc7600 Small Form Factor PC's. One of them is
running the latest version of PC-BSD, which is of course based on
FreeBSD 7.2-STABLE. It appears to load the audio driver, but it's
mute. The dc7600 sports a built-in speaker, and neither it nor any
of the jacks seem to produce sound.

I've looked over the saga of the snd_hda driver, and am not quite clear
where to go. It looks configured. The pin mappings seem to make some
sort of sense, though I don't know what they ought to be.

# cat /dev/sndstat
FreeBSD Audio Driver (newpcm: 32bit 2007061600/i386)
Installed devices:
pcm0: <HDA Realtek ALC260 PCM #0 Analog> at cad 0 nid 1 on hdac0 kld snd_hda
[MPSAFE] (1p:1v/1r:1v channels duplex default)

So it probes fine.

Doing a kldunload/reload with verbose logging reveals

hdac0: <Intel 82801G High Definition Audio Controller> mem 0xfc500000-0xfc503fff irq 21 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090624_0136
hdac0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to vector 60
hdac0: using IRQ 257 for MSI
msi: Assigning MSI IRQ 257 to local APIC 0
hdac0: [MPSAFE]
hdac0: [ITHREAD]
hdac0: Probing codec #0...
hdac0: HDA Codec #0: Realtek ALC260
hdac0: HDA Codec ID: 0x10ec0260
hdac0: Vendor: 0x10ec
hdac0: Device: 0x0260
hdac0: Revision: 0x04
hdac0: Stepping: 0x00
hdac0: PCI Subvendor: 0x3011103c
hdac0: Found audio FG nid=1 startnode=2 endnode=28 total=26
hdac0:
hdac0: Processing audio FG cad=0 nid=1...
hdac0: GPIO: 0x40000004 NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
hdac0: nid 15 0x9993e133 as 3 seq 3 AUX Fixed jack 3 loc 25 color White misc 1
hdac0: nid 16 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
hdac0: nid 17 0x9707e120 as 2 seq 0 Line-out Fixed jack 7 loc 23 color White misc 1
hdac0: nid 18 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
hdac0: nid 19 0x02a11930 as 3 seq 0 Mic Jack jack 1 loc 2 color Black misc 9
hdac0: nid 20 0x01813c31 as 3 seq 1 Line-in Jack jack 1 loc 1 color Blue misc 12
hdac0: nid 21 0x01014c10 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 12
hdac0: nid 22 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
hdac0: Patching widget caps nid=23 0x00400000 -> 0x00700000
hdac0: nid 24 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
hdac0: nid 25 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1
hdac0: Patched pins configuration:
hdac0: nid 15 0x9993e133 as 3 seq 3 AUX Fixed jack 3 loc 25 color White misc 1
hdac0: nid 16 0x0221101f as 1 seq 15 Headphones Jack jack 1 loc 2 color Black misc 0
hdac0: nid 17 0x9707e120 as 2 seq 0 Line-out Fixed jack 7 loc 23 color White misc 1
hdac0: nid 18 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
hdac0: nid 19 0x02a11930 as 3 seq 0 Mic Jack jack 1 loc 2 color Black misc 9
hdac0: nid 20 0x01813c31 as 3 seq 1 Line-in Jack jack 1 loc 1 color Blue misc 12
hdac0: nid 21 0x01014c10 as 1 seq 0 Line-out Jack jack 1 loc 1 color Green misc 12
hdac0: nid 22 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
hdac0: nid 24 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
hdac0: nid 25 0x411111f0 as 15 seq 0 Speaker None jack 1 loc 1 color Black misc 1 [DISABLED]
hdac0: 3 associations found:
hdac0: Association 0 (1) out:
hdac0: Pin nid=21 seq=0
hdac0: Pin nid=16 seq=15
hdac0: Association 1 (2) out:
hdac0: Pin nid=17 seq=0
hdac0: Association 2 (3) in:
hdac0: Pin nid=19 seq=0
hdac0: Pin nid=20 seq=1
hdac0: Pin nid=15 seq=3
hdac0: Tracing association 0 (1)
hdac0: Pin 21 traced to DAC 2
hdac0: Pin 16 traced to DAC 2 and hpredir 0
hdac0: Association 0 (1) trace succeeded
hdac0: Tracing association 1 (2)
hdac0: Unable to trace pin 17 seq 0 with min nid 0
hdac0: Association 1 (2) trace failed
hdac0: Tracing association 2 (3)
hdac0: Pin 19 traced to ADC 4
hdac0: Pin 20 traced to ADC 4
hdac0: Pin 15 traced to ADC 4
hdac0: Association 2 (3) trace succeeded
hdac0: Tracing input monitor
hdac0: Tracing beeper
hdac0: nid 23 traced to out
hdac0: Enabling headphone/speaker audio routing switching:
hdac0: as=0 sense nid=16 [UNSOL]
hdac0: Pin sense: nid=16 res=0x7fffffff
hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
hdac0:
hdac0: +-------------------+
hdac0: | DUMPING HDA NODES |
hdac0: +-------------------+
hdac0:
hdac0: Default Parameter
hdac0: -----------------
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e0560
hdac0: 16 20 24 bits, 44 48 96 192 KHz
hdac0: IN amp: 0x00000000
hdac0: OUT amp: 0x00000000
hdac0:
hdac0: nid: 2
hdac0: Name: audio output
hdac0: Widget cap: 0x00000011
hdac0: STEREO
hdac0: Association: 0 (0x00008001)
hdac0: OSS: pcm (pcm)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e0560
hdac0: 16 20 24 bits, 44 48 96 192 KHz
hdac0:
hdac0: nid: 3 [DISABLED]
hdac0: Name: audio output
hdac0: Widget cap: 0x00000211
hdac0: DIGITAL STEREO
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x001e0560
hdac0: 16 20 24 32 bits, 44 48 96 192 KHz
hdac0:
hdac0: nid: 4
hdac0: Name: audio input
hdac0: Widget cap: 0x0010011b
hdac0: STEREO
hdac0: Association: 2 (0x0000000b)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x00060160
hdac0: 16 20 bits, 44 48 96 KHz
hdac0: Input amp: 0x80032300
hdac0: mute=1 step=35 size=3 offset=0
hdac0: connections: 7
hdac0: |
hdac0: + [DISABLED] <- nid=18 [pin: Speaker (None)] [DISABLED]
hdac0: + <- nid=19 [pin: Mic (Black Jack)] (selected)
hdac0: + <- nid=20 [pin: Line-in (Blue Jack)]
hdac0: + [DISABLED] <- nid=21 [pin: Line-out (Green Jack)]
hdac0: + [DISABLED] <- nid=22 [pin: Speaker (None)] [DISABLED]
hdac0: + <- nid=15 [pin: AUX (Fixed)]
hdac0: + [DISABLED] <- nid=16 [pin: Headphones (Black Jack)]
hdac0:
hdac0: nid: 5 [DISABLED]
hdac0: Name: audio input
hdac0: Widget cap: 0x0010011b
hdac0: STEREO
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x00060160
hdac0: 16 20 bits, 44 48 96 KHz
hdac0: Input amp: 0x80032300
hdac0: mute=1 step=35 size=3 offset=0
hdac0: connections: 8
hdac0: |
hdac0: + [DISABLED] <- nid=18 [pin: Speaker (None)] [DISABLED] (selected)
hdac0: + <- nid=19 [pin: Mic (Black Jack)]
hdac0: + <- nid=20 [pin: Line-in (Blue Jack)]
hdac0: + <- nid=21 [pin: Line-out (Green Jack)]
hdac0: + [DISABLED] <- nid=22 [pin: Speaker (None)] [DISABLED]
hdac0: + <- nid=7 [audio mixer]
hdac0: + <- nid=15 [pin: AUX (Fixed)]
hdac0: + <- nid=16 [pin: Headphones (Black Jack)]
hdac0:
hdac0: nid: 6 [DISABLED]
hdac0: Name: audio input
hdac0: Widget cap: 0x00100391
hdac0: DIGITAL UNSOL STEREO
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x001e0160
hdac0: 16 20 24 32 bits, 44 48 96 KHz
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=25 [pin: Speaker (None)] [DISABLED]
hdac0:
hdac0: nid: 7
hdac0: Name: audio mixer
hdac0: Widget cap: 0x0020010b
hdac0: STEREO
hdac0: Association: -2 (0x00000000)
hdac0: OSS: speaker, line, mic, line1
hdac0: Input amp: 0x80034123
hdac0: mute=1 step=65 size=3 offset=35
hdac0: connections: 8
hdac0: |
hdac0: + [DISABLED] <- nid=18 [pin: Speaker (None)] [DISABLED]
hdac0: + <- nid=19 [pin: Mic (Black Jack)]
hdac0: + <- nid=20 [pin: Line-in (Blue Jack)]
hdac0: + [DISABLED] <- nid=21 [pin: Line-out (Green Jack)]
hdac0: + [DISABLED] <- nid=22 [pin: Speaker (None)] [DISABLED]
hdac0: + <- nid=23 [beep widget]
hdac0: + <- nid=15 [pin: AUX (Fixed)]
hdac0: + [DISABLED] <- nid=16 [pin: Headphones (Black Jack)]
hdac0:
hdac0: nid: 8
hdac0: Name: audio mixer
hdac0: Widget cap: 0x0020010f
hdac0: STEREO
hdac0: Association: 0 (0x00000001)
hdac0: OSS: pcm, speaker, line, mic, line1
hdac0: Output amp: 0x00034040
hdac0: mute=0 step=64 size=3 offset=64
hdac0: Input amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=2 [audio output]
hdac0: + <- nid=7 [audio mixer]
hdac0:
hdac0: nid: 9
hdac0: Name: audio mixer
hdac0: Widget cap: 0x0020010f
hdac0: STEREO
hdac0: Association: 0 (0x00008000)
hdac0: OSS: pcm, speaker, line, mic, line1
hdac0: Output amp: 0x00034040
hdac0: mute=0 step=64 size=3 offset=64
hdac0: Input amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=2 [audio output]
hdac0: + <- nid=7 [audio mixer]
hdac0:
hdac0: nid: 10 [DISABLED]
hdac0: Name: audio mixer
hdac0: Widget cap: 0x0020010e
hdac0: Output amp: 0x00034123
hdac0: mute=0 step=65 size=3 offset=35
hdac0: Input amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 2
hdac0: |
hdac0: + [DISABLED] <- nid=2 [audio output]
hdac0: + [DISABLED] <- nid=7 [audio mixer]
hdac0:
hdac0: nid: 11 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x00300101
hdac0: STEREO
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=8 [audio mixer] (selected)
hdac0: + <- nid=9 [audio mixer]
hdac0:
hdac0: nid: 12 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x00300101
hdac0: STEREO
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=8 [audio mixer] (selected)
hdac0: + <- nid=9 [audio mixer]
hdac0:
hdac0: nid: 13 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x00300101
hdac0: STEREO
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=8 [audio mixer] (selected)
hdac0: + <- nid=9 [audio mixer]
hdac0:
hdac0: nid: 14
hdac0: Name: audio selector
hdac0: Widget cap: 0x00300101
hdac0: STEREO
hdac0: Association: 0 (0x00000001)
hdac0: OSS: pcm, speaker, line, mic, line1
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=8 [audio mixer] (selected)
hdac0: + [DISABLED] <- nid=9 [audio mixer]
hdac0:
hdac0: nid: 15
hdac0: Name: pin: AUX (Fixed)
hdac0: Widget cap: 0x0040018d
hdac0: UNSOL STEREO
hdac0: Association: 2 (0x00000008)
hdac0: OSS: line1 (line1)
hdac0: Pin cap: 0x0001003f
hdac0: ISC TRQD PDC HP OUT IN EAPD
hdac0: Pin config: 0x9993e133
hdac0: Pin control: 0x00000020 IN
hdac0: EAPD: 0x00000002
hdac0: Output amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=8 [audio mixer]
hdac0:
hdac0: nid: 16
hdac0: Name: pin: Headphones (Black Jack)
hdac0: Widget cap: 0x0040018d
hdac0: UNSOL STEREO
hdac0: Association: 0 (0x00008000)
hdac0: Pin cap: 0x0001003f
hdac0: ISC TRQD PDC HP OUT IN EAPD
hdac0: Pin config: 0x0221101f
hdac0: Pin control: 0x000000c0 HP OUT
hdac0: EAPD: 0x00000002
hdac0: Output amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=9 [audio mixer]
hdac0:
hdac0: nid: 17 [DISABLED]
hdac0: Name: pin: Line-out (Fixed)
hdac0: Widget cap: 0x0040010c
hdac0: Pin cap: 0x00000010
hdac0: OUT
hdac0: Pin config: 0x9707e120
hdac0: Pin control: 0x00000000
hdac0: Output amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=10 [audio mixer] [DISABLED]
hdac0:
hdac0: nid: 18 [DISABLED]
hdac0: Name: pin: Speaker (None)
hdac0: Widget cap: 0x0040018d
hdac0: UNSOL STEREO
hdac0: Pin cap: 0x0000133f
hdac0: ISC TRQD PDC HP OUT IN VREF[ 50 80 HIZ ]
hdac0: Pin config: 0x411111f0
hdac0: Pin control: 0x00000000
hdac0: Output amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=11 [audio selector] [DISABLED]
hdac0:
hdac0: nid: 19
hdac0: Name: pin: Mic (Black Jack)
hdac0: Widget cap: 0x0040018d
hdac0: UNSOL STEREO
hdac0: Association: 2 (0x00000001)
hdac0: OSS: mic (mic)
hdac0: Pin cap: 0x0000133f
hdac0: ISC TRQD PDC HP OUT IN VREF[ 50 80 HIZ ]
hdac0: Pin config: 0x02a11930
hdac0: Pin control: 0x00000024 IN VREFs
hdac0: Output amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=12 [audio selector] [DISABLED]
hdac0:
hdac0: nid: 20
hdac0: Name: pin: Line-in (Blue Jack)
hdac0: Widget cap: 0x0040018d
hdac0: UNSOL STEREO
hdac0: Association: 2 (0x00000002)
hdac0: OSS: line (line)
hdac0: Pin cap: 0x0000133f
hdac0: ISC TRQD PDC HP OUT IN VREF[ 50 80 HIZ ]
hdac0: Pin config: 0x01813c31
hdac0: Pin control: 0x00000024 IN VREFs
hdac0: Output amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=13 [audio selector] [DISABLED]
hdac0:
hdac0: nid: 21
hdac0: Name: pin: Line-out (Green Jack)
hdac0: Widget cap: 0x0040018d
hdac0: UNSOL STEREO
hdac0: Association: 0 (0x00000001)
hdac0: Pin cap: 0x0000133f
hdac0: ISC TRQD PDC HP OUT IN VREF[ 50 80 HIZ ]
hdac0: Pin config: 0x01014c10
hdac0: Pin control: 0x00000040 OUT
hdac0: Output amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=14 [audio selector]
hdac0:
hdac0: nid: 22 [DISABLED]
hdac0: Name: pin: Speaker (None)
hdac0: Widget cap: 0x00400001
hdac0: STEREO
hdac0: Pin cap: 0x00000020
hdac0: IN
hdac0: Pin config: 0x411111f0
hdac0: Pin control: 0x00000000
hdac0:
hdac0: nid: 23
hdac0: Name: beep widget
hdac0: Widget cap: 0x00700000
hdac0: Association: -2 (0x00000000)
hdac0: OSS: speaker (speaker)
hdac0:
hdac0: nid: 24 [DISABLED]
hdac0: Name: pin: Speaker (None)
hdac0: Widget cap: 0x00400380
hdac0: DIGITAL UNSOL
hdac0: Pin cap: 0x00000014
hdac0: PDC OUT
hdac0: Pin config: 0x411111f0
hdac0: Pin control: 0x00000000
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=3 [audio output] [DISABLED]
hdac0:
hdac0: nid: 25 [DISABLED]
hdac0: Name: pin: Speaker (None)
hdac0: Widget cap: 0x00400280
hdac0: DIGITAL UNSOL
hdac0: Pin cap: 0x00000024
hdac0: PDC IN
hdac0: Pin config: 0x411111f0
hdac0: Pin control: 0x00000000
hdac0:
hdac0: nid: 26 [DISABLED]
hdac0: Name: vendor widget
hdac0: Widget cap: 0x00f00040
hdac0: PROC
hdac0:
hdac0: nid: 27 [DISABLED]
hdac0: Name: volume widget
hdac0: Widget cap: 0x00600080
hdac0: UNSOL
hdac0:
pci1: driver added
pci5: driver added
pci32: driver added
pci63: driver added
pcm0: <HDA Realtek ALC260 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
pcm0: +--------------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: Stream cap: 0x00000001
pcm0: PCM
pcm0: PCM cap: 0x000e0560
pcm0: 16 20 24 bits, 44 48 96 192 KHz
pcm0: DAC: 2
pcm0:
pcm0: Record:
pcm0:
pcm0: Stream cap: 0x00000001
pcm0: PCM
pcm0: PCM cap: 0x00060160
pcm0: 16 20 bits, 44 48 96 KHz
pcm0: ADC: 4
pcm0:
pcm0: +-------------------------------+
pcm0: | DUMPING Playback/Record Paths |
pcm0: +-------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: nid=16 [pin: Headphones (Black Jack)]
pcm0: |
pcm0: + <- nid=9 [audio mixer] [src: pcm, speaker, line, mic, line1]
pcm0: |
pcm0: + <- nid=2 [audio output] [src: pcm]
pcm0: + <- nid=7 [audio mixer] [src: speaker, line, mic, line1]
pcm0: |
pcm0: + <- nid=19 [pin: Mic (Black Jack)] [src: mic]
pcm0: + <- nid=20 [pin: Line-in (Blue Jack)] [src: line]
pcm0: + <- nid=23 [beep widget] [src: speaker]
pcm0: + <- nid=15 [pin: AUX (Fixed)] [src: line1]
pcm0:
pcm0: nid=21 [pin: Line-out (Green Jack)]
pcm0: |
pcm0: + <- nid=14 [audio selector] [src: pcm, speaker, line, mic, line1]
pcm0: |
pcm0: + <- nid=8 [audio mixer] [src: pcm, speaker, line, mic, line1]
pcm0: |
pcm0: + <- nid=2 [audio output] [src: pcm]
pcm0: + <- nid=7 [audio mixer] [src: speaker, line, mic, line1]
pcm0: |
pcm0: + <- nid=19 [pin: Mic (Black Jack)] [src: mic]
pcm0: + <- nid=20 [pin: Line-in (Blue Jack)] [src: line]
pcm0: + <- nid=23 [beep widget] [src: speaker]
pcm0: + <- nid=15 [pin: AUX (Fixed)] [src: line1]
pcm0:
pcm0: Record:
pcm0:
pcm0: nid=4 [audio input]
pcm0: |
pcm0: + <- nid=19 [pin: Mic (Black Jack)] [src: mic]
pcm0: + <- nid=20 [pin: Line-in (Blue Jack)] [src: line]
pcm0: + <- nid=15 [pin: AUX (Fixed)] [src: line1]
pcm0:
pcm0: +-------------------------+
pcm0: | DUMPING Volume Controls |
pcm0: +-------------------------+
pcm0:
pcm0: Master Volume (OSS: vol)
pcm0: |
pcm0: +- ctl 11 (nid 8 out): -64/0dB (65 steps)
pcm0: +- ctl 12 (nid 8 in 0): mute
pcm0: +- ctl 13 (nid 8 in 1): mute
pcm0: +- ctl 14 (nid 9 out): -64/0dB (65 steps)
pcm0: +- ctl 15 (nid 9 in 0): mute
pcm0: +- ctl 16 (nid 9 in 1): mute
pcm0: +- ctl 21 (nid 16 in ): mute
pcm0: +- ctl 26 (nid 21 in ): mute
pcm0:
pcm0: PCM Volume (OSS: pcm)
pcm0: |
pcm0: +- ctl 12 (nid 8 in 0): mute
pcm0: +- ctl 15 (nid 9 in 0): mute
pcm0:
pcm0: Microphone Volume (OSS: mic)
pcm0: |
pcm0: +- ctl 4 (nid 7 in 1): -35/30dB (66 steps) + mute
pcm0:
pcm0: Line-in Volume (OSS: line)
pcm0: |
pcm0: +- ctl 5 (nid 7 in 2): -35/30dB (66 steps) + mute
pcm0:
pcm0: Speaker/Beep Volume (OSS: speaker)
pcm0: |
pcm0: +- ctl 8 (nid 7 in 5): -35/30dB (66 steps) + mute
pcm0:
pcm0: Unknown Ctl (OSS: line1)
pcm0: |
pcm0: +- ctl 9 (nid 7 in 6): -35/30dB (66 steps) + mute
pcm0:
pcm0: Enabling Soft PCM volume
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "ogain":
pcm0: Mixer "line1":
pcm0: Soft PCM mixer ENABLED
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 1cb30000, 4000; 0xe7ae4000 -> 1cb30000
pcm0: sndbuf_setmap 1cb90000, 4000; 0xe7af4000 -> 1cb90000

I saw some mention of unmapped or incorrectly mapped audio outputs
with snd_hda, but I'm not sure how to tell what they ought to be.
I see some things are listed as [DISABLED] but haven't figured out
whether that's reasonable or not.

Any suggestions appreciated.

... JG
--
Joe Greco - sol.net Network Services - Milwaukee, WI - http://www.sol.net
"We call it the 'one bite at the apple' rule. Give me one chance [and] then I
won't contact you again." - Direct Marketing Ass'n position on e-mail spam(CNN)
With 24 million small businesses in the US alone, that's way too many apples.
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

ports/audio/fluidsynth/Makefile

2009-11-22T13:03:59Z

Hi,

This port should be stepped up to version 1.0.10 ?

--HPS
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."

configure (was: Re: Call for Testers: MythTV 0.22 )

2009-11-20T11:38:32Z

In message <c39ec84c0911201108o2c66c985gd96baf94f5148ba@...>, usleepless@... writes:

> - configure uses a yet unknown to me method to create the .c-test-file and
> gcc-command. it does not include /usr/local/include by default

I suppose -multimedia@ isn't the best place to whine about configure,
but I'm going to anyway. :-)

Configure is nice when it works, but when it breaks (which happens
all too often), it is a major pain to figure out what is going on
behind the scenes and find a fix, even a kludgy fix. Is there a
How-to-debug-configure-for-dummies out there somewhere? Or is
configure intended to be the replacement source of frustration now
that we have postfix and can avoid beating our heads against sendmail.cf?
_______________________________________________
freebsd-multimedia@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe@..."