Nabble - freebsd-ppc

Re: 8.0-RC2 on Rackmac3,1 - fatal kernel trap

2009-11-07T05:36:54Z

I just took a look at the data layout in the kernel, and translations
immediately precedes ofwcall, so there is no question that the buffer
size has been exceeded and that the zeroing the translations buffer has
killed ofwcall. I'll send you a new CD with a larger buffer (and bounds
checking) sometime at the beginning of next week. Hopefully, the change
will also be merged in 8.0-RELEASE.
-Nathan

Nathan Whitehorn wrote:

> This is the middle of reading out the current MMU translations from
> Open Firmware (the OF_getprop() call at line 902 of mmu_oea64.c). It's
> possible the size of the translations buffer has been exceeded, and
> memory has been trashed, which would also explain why there is a
> difference between CD and netbooting. Peter, any ideas?
> -Nathan
>
> Jacob Lambert wrote:
>> Here's a transcript with 'show registers' and 'bt' after trying to
>> boot your 9.0-20091106-SNAP-powerpc-bootonly.iso.
>>
>> ---
>> 0 > boot cd:,\boot\loader cd:0 load-size=3994c adler32=a40c7b0c
>>
>> Loading ELF
>> Consoles: Open Firmware console
>>
>> FreeBSD/powerpc Open Firmware loader, Revision 0.1
>> (root@..., Fri Nov 6 04:12:54 UTC 2009)
>> Memory: 2097152KB
>> Booted from: /ht/pci@5/ata-6/disk@0
>>
>> Loading /boot/defaults/loader.conf
>> /boot/kernel/kernel data=0x72f8b0+0x199f98
>> syms=[0x4+0x5fad0+0x4+0x83f05]
>> \
>> Hit [Enter] to boot immediately, or any other key for command prompt.
>> Booting [/boot/kernel/kernel] in 9 seconds...
>>
>> Type '?' for a list of commands, 'help' for more detailed help.
>> OK boot
>> Kernel entry at 0x100100 ...
>> KDB: debugger backends: ddb
>> KDB: current backend: ddb
>>
>> fatal kernel trap:
>>
>> exception = 0x7 (program)
>> srr0 = 0x0
>> srr1 = 0x83030
>> lr = 0x582038
>> curthread = 0
>>
>> [thread pid -1 tid 0 ]
>> Stopped at 0: illegal instruction 0
>> db> show registers
>> r0 0
>> r1 0x7e9e20 tmpstk+0x1e20
>> r2 0
>> r3 0x829998 args.5817
>> r4 0xff88ed18
>> r5 0x829998 args.5817
>> r6 0x9b60ac translations
>> r7 0x960 dsisize+0x8bc
>> r8 0x1
>> r9 0
>> r10 0x1c32ce4
>> r11 0
>> r12 0x24000028
>> r13 0
>> r14 0
>> r15 0
>> r16 0
>> r17 0
>> r18 0
>> r19 0x100100 __start
>> r20 0xeaf000
>> r21 0x4
>> r22 0x1c2e330
>> r23 0x9c9848 end
>> r24 0x100100 __start
>> r25 0x9c5f54 mmu_kernel_obj
>> r26 0x960 dsisize+0x8bc
>> r27 0x9b60ac translations
>> r28 0x7e00d4
>> r29 0xff88ed18
>> r30 0x3030 dsisize+0x2f8c
>> r31 0x7e9e20 tmpstk+0x1e20
>> srr0 0
>> srr1 0x83030
>> lr 0x582038 openfirmware+0x120
>> ctr 0
>> cr 0x24000022
>> xer 0
>> dar 0
>> dsisr 0
>> 0: illegal instruction 0
>> db> bt
>> Tracing pid -1 tid 0 td 0
>> 0x007e9e80: at ofw_std_getprop+0x3c
>> 0x007e9ea0: at OF_getprop+0x8c
>> 0x007e9ed0: at moea64_bridge_bootstrap+0x5c8
>> 0x007e9f90: at kernbase+0xfc
>> db>
>> ---
>>
>> On Fri, Nov 6, 2009 at 11:57 AM, Nathan Whitehorn
>> <nwhitehorn@...> wrote:
>>
>>> Jacob Lambert wrote:
>>>
>>>> All-righty, I've got three boot transcripts for you're viewing
>>>> pleasure.
>>>>
>>>> First, I snagged a copy of 8.0-CURRENT-200906-powerpc-disc1.iso and
>>>> burned it. I've removed the ATI video card so this is all done from
>>>> the serial console with Open Firmware. Here's the transcript:
>>>>
>>>>
>>> [snip]
>>>
>>>> Next, being a bored and curious sysadmin, I managed to find that you
>>>> had just uploaded 9.0-20091106-SNAP-powerpc-bootonly.iso to your home
>>>> folder on people.freebsd.org. I suppose it's premature for me to be
>>>> fiddling with it but like I said, I'm bored. :) Here's the transcript:
>>>>
>>>>
>>> That is remarkably bored and curious: you beat my email to tell you
>>> about
>>> it! I'd be very interested in the output of 'show registers' and
>>> also 'bt',
>>> if the kernel is on the real stack yet.
>>> -Nathan
>>>
>>>
>>
>>
>>
>>
>
> _______________________________________________
> freebsd-ppc@... mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
> To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Re: 8.0-RC2 on Rackmac3,1 - fatal kernel trap

2009-11-07T05:27:46Z

This is the middle of reading out the current MMU translations from Open
Firmware (the OF_getprop() call at line 902 of mmu_oea64.c). It's
possible the size of the translations buffer has been exceeded, and
memory has been trashed, which would also explain why there is a
difference between CD and netbooting. Peter, any ideas?
-Nathan

Jacob Lambert wrote:

> Here's a transcript with 'show registers' and 'bt' after trying to
> boot your 9.0-20091106-SNAP-powerpc-bootonly.iso.
>
> ---
> 0 > boot cd:,\boot\loader cd:0 load-size=3994c adler32=a40c7b0c
>
> Loading ELF
> Consoles: Open Firmware console
>
> FreeBSD/powerpc Open Firmware loader, Revision 0.1
> (root@..., Fri Nov 6 04:12:54 UTC 2009)
> Memory: 2097152KB
> Booted from: /ht/pci@5/ata-6/disk@0
>
> Loading /boot/defaults/loader.conf
> /boot/kernel/kernel data=0x72f8b0+0x199f98 syms=[0x4+0x5fad0+0x4+0x83f05]
> \
> Hit [Enter] to boot immediately, or any other key for command prompt.
> Booting [/boot/kernel/kernel] in 9 seconds...
>
> Type '?' for a list of commands, 'help' for more detailed help.
> OK boot
> Kernel entry at 0x100100 ...
> KDB: debugger backends: ddb
> KDB: current backend: ddb
>
> fatal kernel trap:
>
> exception = 0x7 (program)
> srr0 = 0x0
> srr1 = 0x83030
> lr = 0x582038
> curthread = 0
>
> [thread pid -1 tid 0 ]
> Stopped at 0: illegal instruction 0
> db> show registers
> r0 0
> r1 0x7e9e20 tmpstk+0x1e20
> r2 0
> r3 0x829998 args.5817
> r4 0xff88ed18
> r5 0x829998 args.5817
> r6 0x9b60ac translations
> r7 0x960 dsisize+0x8bc
> r8 0x1
> r9 0
> r10 0x1c32ce4
> r11 0
> r12 0x24000028
> r13 0
> r14 0
> r15 0
> r16 0
> r17 0
> r18 0
> r19 0x100100 __start
> r20 0xeaf000
> r21 0x4
> r22 0x1c2e330
> r23 0x9c9848 end
> r24 0x100100 __start
> r25 0x9c5f54 mmu_kernel_obj
> r26 0x960 dsisize+0x8bc
> r27 0x9b60ac translations
> r28 0x7e00d4
> r29 0xff88ed18
> r30 0x3030 dsisize+0x2f8c
> r31 0x7e9e20 tmpstk+0x1e20
> srr0 0
> srr1 0x83030
> lr 0x582038 openfirmware+0x120
> ctr 0
> cr 0x24000022
> xer 0
> dar 0
> dsisr 0
> 0: illegal instruction 0
> db> bt
> Tracing pid -1 tid 0 td 0
> 0x007e9e80: at ofw_std_getprop+0x3c
> 0x007e9ea0: at OF_getprop+0x8c
> 0x007e9ed0: at moea64_bridge_bootstrap+0x5c8
> 0x007e9f90: at kernbase+0xfc
> db>
> ---
>
> On Fri, Nov 6, 2009 at 11:57 AM, Nathan Whitehorn
> <nwhitehorn@...> wrote:
>
>> Jacob Lambert wrote:
>>
>>> All-righty, I've got three boot transcripts for you're viewing pleasure.
>>>
>>> First, I snagged a copy of 8.0-CURRENT-200906-powerpc-disc1.iso and
>>> burned it. I've removed the ATI video card so this is all done from
>>> the serial console with Open Firmware. Here's the transcript:
>>>
>>>
>> [snip]
>>
>>> Next, being a bored and curious sysadmin, I managed to find that you
>>> had just uploaded 9.0-20091106-SNAP-powerpc-bootonly.iso to your home
>>> folder on people.freebsd.org. I suppose it's premature for me to be
>>> fiddling with it but like I said, I'm bored. :) Here's the transcript:
>>>
>>>
>> That is remarkably bored and curious: you beat my email to tell you about
>> it! I'd be very interested in the output of 'show registers' and also 'bt',
>> if the kernel is on the real stack yet.
>> -Nathan
>>
>>
>
>
>
>

_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

New Arrival of REFURBISHED and NEW Computers & Laptops

2009-11-06T12:05:53Z

_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Re: 8.0-RC2 on Rackmac3,1 - fatal kernel trap

2009-11-06T09:57:45Z

Jacob Lambert wrote:
> All-righty, I've got three boot transcripts for you're viewing pleasure.
>
> First, I snagged a copy of 8.0-CURRENT-200906-powerpc-disc1.iso and
> burned it. I've removed the ATI video card so this is all done from
> the serial console with Open Firmware. Here's the transcript:
>
[snip]
> Next, being a bored and curious sysadmin, I managed to find that you
> had just uploaded 9.0-20091106-SNAP-powerpc-bootonly.iso to your home
> folder on people.freebsd.org. I suppose it's premature for me to be
> fiddling with it but like I said, I'm bored. :) Here's the transcript:
>
That is remarkably bored and curious: you beat my email to tell you
about it! I'd be very interested in the output of 'show registers' and
also 'bt', if the kernel is on the real stack yet.
-Nathan
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Re: 8.0-RC2 on Rackmac3,1 - fatal kernel trap

2009-11-06T08:51:22Z

All-righty, I've got three boot transcripts for you're viewing pleasure.

First, I snagged a copy of 8.0-CURRENT-200906-powerpc-disc1.iso and
burned it. I've removed the ATI video card so this is all done from
the serial console with Open Firmware. Here's the transcript:

---
Apple RackMac3,1 5.1.7f1 BootROM built on 08/25/04 at 15:11:09
Copyright 1994-2004 Apple Computer, Inc.
All Rights Reserved.

Welcome to Open Firmware, the system time and date is: 15:39:14 11/06/2009

To continue booting, type "mac-boot" and press return.
To shut down, type "shut-down" and press return.

ok
0 > boot cd:,\boot\loader cd:0 load-size=399b8 adler32=e950aab3

Loading ELF
Consoles: Open Firmware console

FreeBSD/powerpc Open Firmware loader, Revision 0.1
(root@..., Sat Jun 13 19:53:35 UTC 2009)
Memory: 2097152KB
Booted from: /ht/pci@5/ata-6/disk@0

Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x544e80+0x1a72a0 syms=[0x4+0x58970+0x4+0x7aaf5]
|
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 8 seconds...

Type '?' for a list of commands, 'help' for more detailed help.
OK boot -v
Kernel entry at 0x100100 ...
KDB: debugger backends: ddb
KDB: current backend: ddb
---

Next, being a bored and curious sysadmin, I managed to find that you
had just uploaded 9.0-20091106-SNAP-powerpc-bootonly.iso to your home
folder on people.freebsd.org. I suppose it's premature for me to be
fiddling with it but like I said, I'm bored. :) Here's the transcript:

---
Apple RackMac3,1 5.1.7f1 BootROM built on 08/25/04 at 15:11:09
Copyright 1994-2004 Apple Computer, Inc.
All Rights Reserved.

Welcome to Open Firmware, the system time and date is: 16:01:53 11/06/2009

To continue booting, type "mac-boot" and press return.
To shut down, type "shut-down" and press return.

ok
0 > eject cd ok
0 > boot cd:,\boot\loader cd:0 load-size=3994c adler32=a40c7b0c

Loading ELF
Consoles: Open Firmware console

FreeBSD/powerpc Open Firmware loader, Revision 0.1
(root@..., Fri Nov 6 04:12:54 UTC 2009)
Memory: 2097152KB
Booted from: /ht/pci@5/ata-6/disk@0

Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x72f8b0+0x199f98 syms=[0x4+0x5fad0+0x4+0x83f05]
\
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Kernel entry at 0x100100 ...
KDB: debugger backends: ddb
KDB: current backend: ddb

fatal kernel trap:

exception = 0x7 (program)
srr0 = 0x0
srr1 = 0x83030
lr = 0x582038
curthread = 0

[thread pid -1 tid 0 ]
Stopped at 0: illegal instruction 0
db>
---

So there at least I have a debug prompt, but I'm not really sure what
to do with it.

Finally, here's the transcript from the 8.0-RC2 iso:

---
Apple RackMac3,1 5.1.7f1 BootROM built on 08/25/04 at 15:11:09
Copyright 1994-2004 Apple Computer, Inc.
All Rights Reserved.

Welcome to Open Firmware, the system time and date is: 15:44:05 11/06/2009

To continue booting, type "mac-boot" and press return.
To shut down, type "shut-down" and press return.

ok
0 > eject cd ok
0 > boot cd:,\boot\loader cd:0 load-size=39e30 adler32=bb32cdd6

Loading ELF
Consoles: Open Firmware console

FreeBSD/powerpc Open Firmware loader, Revision 0.1
(root@..., Sun Oct 25 17:38:09 UTC 2009)
Memory: 2097152KB
Booted from: /ht/pci@5/ata-6/disk@0

Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x717e74+0x3e1bc syms=[0x4+0x59c40+0x4+0x7c0dd]
|
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 8 seconds...

Type '?' for a list of commands, 'help' for more detailed help.
OK boot -v
Kernel entry at 0x100100 ...

fatal kernel trap:

exception = 0x7 (program)
srr0 = 0x0
srr1 = 0x83030
lr = 0x59bfa0
curthread = 0

panic: program trap
Uptime: 1s
---

So, is there any other information I might provide for you?

BTW, thanks for all the help!

-jacob

On Thu, Nov 5, 2009 at 8:39 AM, Jacob Lambert <tharant@...> wrote:

> Yes, please, it it's not too much trouble I'd love a -CURRENT ppc iso.
>
> My previous attempts were all made with a video console. I've tried booting
> with 'C' at power up as well as issuing 'boot cd:,\boot\loader cd:0' from
> the openfirmware prompt. Results are the same either way. I finally yanked
> it from our data center last night and brought it to the office where I can
> fiddle with it in comfort; I should be able to provide you with a full boot
> transcript sometime later today.
>
> -jacob
>
> On Nov 4, 2009, at 6:18 PM, Nathan Whitehorn <nwhitehorn@...> wrote:
>
>> I'm not sure what's going on with the release CDs -- you should get
>> farther than that. Full support for this hardware is currently only in
>> -CURRENT, and missed the 8.0 release inclusion deadline. It should be in
>> 8-stable immediately after the release, however. I can supply an install ISO
>> for -CURRENT, if you are interested.
>>
>> But the CD should at least get you to complaints from the SATA controller,
>> and the kernel certainly should not be jumping to a NULL address like it
>> appears to be doing. Can you give some more details on your setup (i.e.
>> serial or video console, did you boot by pressing 'C' or from the Open
>> Firmware prompt, etc.), and maybe the full transcript of your boot attempt,
>> with the snipped bits restored?
>>
>> Thanks,
>> Nathan
>>
>> Jacob Lambert wrote:
>>>
>>> I've been trying to boot the 8.0-RC2 iso on an Xserve G5. After the
>>> loader screen I simply get a fatal kernel trap.
>>>
>>> --- snip ---
>>>
>>> fatal kernel trap:
>>> exception = 0x7 (program)
>>> srr0 = 0x0
>>> srr1 = 0x83030
>>> lr = 0x59bfa0
>>> curthread = 0
>>>
>>> panic: program trap
>>> Uptime: 1s
>>>
>>> --- snip ---
>>>
>>> Here's my hardware details
>>>
>>> Machine Name: Xserve G5
>>> Machine Model: RackMac3,1
>>> CPU Type: PowerPC G5 (3.0)
>>> Number Of CPUs: 2
>>> CPU Speed: 2 GHz
>>> L2 Cache (per CPU): 512 KB
>>> Memory: 2 GB
>>> Bus Speed: 1 GHz
>>> Boot ROM Version: 5.1.7f1
>>>
>>> Do you guys have any advice for me? I'll see if I can dig up an
>>> 8.0-RC1 disc and report the results later tonight.
>>>
>>> -jacob
>>>
>>>
>>
>

--
-jacob
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Re: 8.0-RC2 on Rackmac3,1 - fatal kernel trap

2009-11-05T06:39:33Z

Yes, please, it it's not too much trouble I'd love a -CURRENT ppc iso.

My previous attempts were all made with a video console. I've tried
booting with 'C' at power up as well as issuing 'boot cd:,\boot\loader
cd:0' from the openfirmware prompt. Results are the same either way.
I finally yanked it from our data center last night and brought it to
the office where I can fiddle with it in comfort; I should be able to
provide you with a full boot transcript sometime later today.

-jacob

On Nov 4, 2009, at 6:18 PM, Nathan Whitehorn <nwhitehorn@...>
wrote:

> I'm not sure what's going on with the release CDs -- you should get
> farther than that. Full support for this hardware is currently only
> in -CURRENT, and missed the 8.0 release inclusion deadline. It
> should be in 8-stable immediately after the release, however. I can
> supply an install ISO for -CURRENT, if you are interested.
>
> But the CD should at least get you to complaints from the SATA
> controller, and the kernel certainly should not be jumping to a NULL
> address like it appears to be doing. Can you give some more details
> on your setup (i.e. serial or video console, did you boot by
> pressing 'C' or from the Open Firmware prompt, etc.), and maybe the
> full transcript of your boot attempt, with the snipped bits restored?
>
> Thanks,
> Nathan
>
> Jacob Lambert wrote:
>> I've been trying to boot the 8.0-RC2 iso on an Xserve G5. After the
>> loader screen I simply get a fatal kernel trap.
>>
>> --- snip ---
>>
>> fatal kernel trap:
>> exception = 0x7 (program)
>> srr0 = 0x0
>> srr1 = 0x83030
>> lr = 0x59bfa0
>> curthread = 0
>>
>> panic: program trap
>> Uptime: 1s
>>
>> --- snip ---
>>
>> Here's my hardware details
>>
>> Machine Name: Xserve G5
>> Machine Model: RackMac3,1
>> CPU Type: PowerPC G5 (3.0)
>> Number Of CPUs: 2
>> CPU Speed: 2 GHz
>> L2 Cache (per CPU): 512 KB
>> Memory: 2 GB
>> Bus Speed: 1 GHz
>> Boot ROM Version: 5.1.7f1
>>
>> Do you guys have any advice for me? I'll see if I can dig up an
>> 8.0-RC1 disc and report the results later tonight.
>>
>> -jacob
>>
>>
>

_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Re: 8.0-RC2 on Rackmac3,1 - fatal kernel trap

2009-11-04T16:18:39Z

I'm not sure what's going on with the release CDs -- you should get
farther than that. Full support for this hardware is currently only in
-CURRENT, and missed the 8.0 release inclusion deadline. It should be in
8-stable immediately after the release, however. I can supply an install
ISO for -CURRENT, if you are interested.

But the CD should at least get you to complaints from the SATA
controller, and the kernel certainly should not be jumping to a NULL
address like it appears to be doing. Can you give some more details on
your setup (i.e. serial or video console, did you boot by pressing 'C'
or from the Open Firmware prompt, etc.), and maybe the full transcript
of your boot attempt, with the snipped bits restored?

Thanks,
Nathan

Jacob Lambert wrote:

> I've been trying to boot the 8.0-RC2 iso on an Xserve G5. After the
> loader screen I simply get a fatal kernel trap.
>
> --- snip ---
>
> fatal kernel trap:
> exception = 0x7 (program)
> srr0 = 0x0
> srr1 = 0x83030
> lr = 0x59bfa0
> curthread = 0
>
> panic: program trap
> Uptime: 1s
>
> --- snip ---
>
> Here's my hardware details
>
> Machine Name: Xserve G5
> Machine Model: RackMac3,1
> CPU Type: PowerPC G5 (3.0)
> Number Of CPUs: 2
> CPU Speed: 2 GHz
> L2 Cache (per CPU): 512 KB
> Memory: 2 GB
> Bus Speed: 1 GHz
> Boot ROM Version: 5.1.7f1
>
> Do you guys have any advice for me? I'll see if I can dig up an
> 8.0-RC1 disc and report the results later tonight.
>
> -jacob
>
>

_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

8.0-RC2 on Rackmac3,1 - fatal kernel trap

2009-11-04T14:56:35Z

I've been trying to boot the 8.0-RC2 iso on an Xserve G5. After the
loader screen I simply get a fatal kernel trap.

--- snip ---

fatal kernel trap:
exception = 0x7 (program)
srr0 = 0x0
srr1 = 0x83030
lr = 0x59bfa0
curthread = 0

panic: program trap
Uptime: 1s

--- snip ---

Here's my hardware details

Machine Name: Xserve G5
Machine Model: RackMac3,1
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 2
CPU Speed: 2 GHz
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 1 GHz
Boot ROM Version: 5.1.7f1

Do you guys have any advice for me? I'll see if I can dig up an
8.0-RC1 disc and report the results later tonight.

-jacob

--
-jacob
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

[head tinderbox] failure on powerpc/powerpc

2009-11-04T08:47:22Z

TB --- 2009-11-04 16:20:23 - tinderbox 2.6 running on freebsd-current.sentex.ca
TB --- 2009-11-04 16:20:23 - starting HEAD tinderbox run for powerpc/powerpc
TB --- 2009-11-04 16:20:23 - cleaning the object tree
TB --- 2009-11-04 16:20:39 - cvsupping the source tree
TB --- 2009-11-04 16:20:39 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/powerpc/powerpc/supfile
TB --- 2009-11-04 16:21:05 - building world
TB --- 2009-11-04 16:21:05 - MAKEOBJDIRPREFIX=/obj
TB --- 2009-11-04 16:21:05 - PATH=/usr/bin:/usr/sbin:/bin:/sbin
TB --- 2009-11-04 16:21:05 - TARGET=powerpc
TB --- 2009-11-04 16:21:05 - TARGET_ARCH=powerpc
TB --- 2009-11-04 16:21:05 - TZ=UTC
TB --- 2009-11-04 16:21:05 - __MAKE_CONF=/dev/null
TB --- 2009-11-04 16:21:05 - cd /src
TB --- 2009-11-04 16:21:05 - /usr/bin/make -B buildworld

>>> World build started on Wed Nov 4 16:21:07 UTC 2009
>>> Rebuilding the temporary build tree
>>> stage 1.1: legacy release compatibility shims
>>> stage 1.2: bootstrap tools
>>> stage 2.1: cleaning up the object tree
>>> stage 2.2: rebuilding the object tree
>>> stage 2.3: build tools
>>> stage 3: cross tools
>>> stage 4.1: building includes
>>> stage 4.2: building libraries

[...]
cc -O2 -pipe -I/src/lib/libcam -I/src/lib/libcam/../../sys -std=gnu99 -fstack-protector -c /src/lib/libcam/scsi_cmdparse.c
cc -O2 -pipe -I/src/lib/libcam -I/src/lib/libcam/../../sys -std=gnu99 -fstack-protector -c /src/lib/libcam/../../sys/cam/scsi/scsi_all.c
cc -O2 -pipe -I/src/lib/libcam -I/src/lib/libcam/../../sys -std=gnu99 -fstack-protector -c /src/lib/libcam/../../sys/cam/scsi/scsi_da.c
cc -O2 -pipe -I/src/lib/libcam -I/src/lib/libcam/../../sys -std=gnu99 -fstack-protector -c /src/lib/libcam/../../sys/cam/scsi/scsi_sa.c
cc -O2 -pipe -I/src/lib/libcam -I/src/lib/libcam/../../sys -std=gnu99 -fstack-protector -c /src/lib/libcam/../../sys/cam/cam.c
cc -O2 -pipe -I/src/lib/libcam -I/src/lib/libcam/../../sys -std=gnu99 -fstack-protector -c /src/lib/libcam/../../sys/cam/ata/ata_all.c
/src/lib/libcam/../../sys/cam/ata/ata_all.c:379: error: conflicting types for 'ata_pm_write_cmd'
/src/lib/libcam/../../sys/cam/ata/ata_all.h:106: error: previous declaration of 'ata_pm_write_cmd' was here
*** Error code 1

Stop in /src/lib/libcam.
*** Error code 1

Stop in /src/lib.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
TB --- 2009-11-04 16:47:22 - WARNING: /usr/bin/make returned exit code 1
TB --- 2009-11-04 16:47:22 - ERROR: failed to build world
TB --- 2009-11-04 16:47:22 - 1150.63 user 261.07 system 1618.67 real

http://tinderbox.freebsd.org/tinderbox-head-HEAD-powerpc-powerpc.full
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Re: powerpc/140241: [kernel] [patch] Linker set problems on PowerPC EABI

2009-11-03T06:07:07Z

Old Synopsis: Linker set problems on PowerPC EABI
New Synopsis: [kernel] [patch] Linker set problems on PowerPC EABI

Responsible-Changed-From-To: freebsd-bugs->freebsd-ppc
Responsible-Changed-By: linimon
Responsible-Changed-When: Tue Nov 3 14:05:43 UTC 2009
Responsible-Changed-Why:
Over to maintainer(s).

http://www.freebsd.org/cgi/query-pr.cgi?pr=140241
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Current problem reports assigned to freebsd-ppc@FreeBSD.org

2009-11-02T03:07:00Z

Note: to view an individual PR, use:
http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.

S Tracker Resp. Description
--------------------------------------------------------------------------------
o power/139154 ppc Patch for Altivec sysctl
o power/135576 ppc gdb cannot debug threaded programs on ppc
o power/133503 ppc [sound] Sound stutter after switching ttys
o power/133383 ppc firefox thr_kill crash with heavy vm load
o power/133382 ppc [install] Installer gets signal 11
o power/131548 ppc ofw_syscons no longer supports 32-bit framebuffer
a power/121407 ppc [panic] Won't boot up; strange error message.
o power/111296 ppc [kernel] [patch] [request] Support IMISS, DLMISS an DS
o power/93203 ppc FreeBSD PPC Can't Write to Partitions.

9 problems total.

_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

[releng_8 tinderbox] failure on powerpc/powerpc

2009-11-01T14:25:00Z

TB --- 2009-11-01 22:14:11 - tinderbox 2.6 running on freebsd-current.sentex.ca
TB --- 2009-11-01 22:14:11 - starting RELENG_8 tinderbox run for powerpc/powerpc
TB --- 2009-11-01 22:14:11 - cleaning the object tree
TB --- 2009-11-01 22:14:25 - cvsupping the source tree
TB --- 2009-11-01 22:14:25 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/RELENG_8/powerpc/powerpc/supfile
TB --- 2009-11-01 22:14:52 - building world
TB --- 2009-11-01 22:14:52 - MAKEOBJDIRPREFIX=/obj
TB --- 2009-11-01 22:14:52 - PATH=/usr/bin:/usr/sbin:/bin:/sbin
TB --- 2009-11-01 22:14:52 - TARGET=powerpc
TB --- 2009-11-01 22:14:52 - TARGET_ARCH=powerpc
TB --- 2009-11-01 22:14:52 - TZ=UTC
TB --- 2009-11-01 22:14:52 - __MAKE_CONF=/dev/null
TB --- 2009-11-01 22:14:52 - cd /src
TB --- 2009-11-01 22:14:52 - /usr/bin/make -B buildworld

>>> World build started on Sun Nov 1 22:14:53 UTC 2009
>>> Rebuilding the temporary build tree
>>> stage 1.1: legacy release compatibility shims
>>> stage 1.2: bootstrap tools
>>> stage 2.1: cleaning up the object tree
>>> stage 2.2: rebuilding the object tree
>>> stage 2.3: build tools
>>> stage 3: cross tools
>>> stage 4.1: building includes
>>> stage 4.2: building libraries

[...]
cc -O2 -pipe -I/src/lib/libc/include -I/src/lib/libc/../../include -I/src/lib/libc/powerpc -DNLS -D__DBINTERFACE_PRIVATE -I/src/lib/libc/../../contrib/gdtoa -DINET6 -I/obj/powerpc/src/lib/libc -I/src/lib/libc/resolv -D_ACL_PRIVATE -DPOSIX_MISTAKE -I/src/lib/libc/locale -DBROKEN_DES -DPORTMAP -DDES_BUILTIN -I/src/lib/libc/rpc -DYP -DNS_CACHING -DSYMBOL_VERSIONING -std=gnu99 -fstack-protector -Wsystem-headers -Werror -Wall -Wno-format-y2k -Wno-uninitialized -Wno-pointer-sign -c /src/lib/libc/string/wmemmove.c
cc -O2 -pipe -I/src/lib/libc/include -I/src/lib/libc/../../include -I/src/lib/libc/powerpc -DNLS -D__DBINTERFACE_PRIVATE -I/src/lib/libc/../../contrib/gdtoa -DINET6 -I/obj/powerpc/src/lib/libc -I/src/lib/libc/resolv -D_ACL_PRIVATE -DPOSIX_MISTAKE -I/src/lib/libc/locale -DBROKEN_DES -DPORTMAP -DDES_BUILTIN -I/src/lib/libc/rpc -DYP -DNS_CACHING -DSYMBOL_VERSIONING -std=gnu99 -fstack-protector -Wsystem-headers -Werror -Wall -Wno-format-y2k -Wno-uninitialized -Wno-pointer-sign -c /src/lib/libc/string/wmemset.c
building static c library
ranlib libc.a
cat /src/lib/libc/powerpc/Symbol.map /src/lib/libc/db/Symbol.map /src/lib/libc/compat-43/Symbol.map /src/lib/libc/gdtoa/Symbol.map /src/lib/libc/gen/Symbol.map /src/lib/libc/gmon/Symbol.map /src/lib/libc/inet/Symbol.map /src/lib/libc/locale/Symbol.map /src/lib/libc/nameser/Symbol.map /src/lib/libc/net/Symbol.map /src/lib/libc/nls/Symbol.map /src/lib/libc/posix1e/Symbol.map /src/lib/libc/quad/Symbol.map /src/lib/libc/regex/Symbol.map /src/lib/libc/resolv/Symbol.map /src/lib/libc/stdio/Symbol.map /src/lib/libc/stdlib/Symbol.map /src/lib/libc/stdtime/Symbol.map /src/lib/libc/string/Symbol.map /src/lib/libc/sys/Symbol.map /src/lib/libc/rpc/Symbol.map /src/lib/libc/uuid/Symbol.map /src/lib/libc/xdr/Symbol.map /src/lib/libc/yp/Symbol.map | cpp - - | awk -v vfile=/src/lib/libc/Versions.def -f /src/share/mk/version_gen.awk > Version.map
File <stdin>, line 502: Undefined library version `FBSD_1.2'.
File <stdin>, line 503: Symbol `getpagesizes' outside version scope.
2 error(s) total.
*** Error code 1

Stop in /src/lib/libc.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
TB --- 2009-11-01 22:25:00 - WARNING: /usr/bin/make returned exit code 1
TB --- 2009-11-01 22:25:00 - ERROR: failed to build world
TB --- 2009-11-01 22:25:00 - 476.10 user 89.70 system 648.99 real

http://tinderbox.freebsd.org/tinderbox-releng_8-RELENG_8-powerpc-powerpc.full
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

[releng_7 tinderbox] failure on powerpc/powerpc

2009-10-29T09:45:46Z

TB --- 2009-10-29 15:47:29 - tinderbox 2.6 running on freebsd-stable.sentex.ca
TB --- 2009-10-29 15:47:29 - starting RELENG_7 tinderbox run for powerpc/powerpc
TB --- 2009-10-29 15:47:29 - cleaning the object tree
TB --- 2009-10-29 15:48:02 - cvsupping the source tree
TB --- 2009-10-29 15:48:02 - /usr/bin/csup -z -r 3 -g -L 1 -h localhost -s /tinderbox/RELENG_7/powerpc/powerpc/supfile
TB --- 2009-10-29 15:48:12 - building world
TB --- 2009-10-29 15:48:12 - MAKEOBJDIRPREFIX=/obj
TB --- 2009-10-29 15:48:12 - PATH=/usr/bin:/usr/sbin:/bin:/sbin
TB --- 2009-10-29 15:48:12 - TARGET=powerpc
TB --- 2009-10-29 15:48:12 - TARGET_ARCH=powerpc
TB --- 2009-10-29 15:48:12 - TZ=UTC
TB --- 2009-10-29 15:48:12 - __MAKE_CONF=/dev/null
TB --- 2009-10-29 15:48:12 - cd /src
TB --- 2009-10-29 15:48:12 - /usr/bin/make -B buildworld

>>> World build started on Thu Oct 29 15:48:14 UTC 2009
>>> Rebuilding the temporary build tree
>>> stage 1.1: legacy release compatibility shims
>>> stage 1.2: bootstrap tools
>>> stage 2.1: cleaning up the object tree
>>> stage 2.2: rebuilding the object tree
>>> stage 2.3: build tools
>>> stage 3: cross tools
>>> stage 4.1: building includes
>>> stage 4.2: building libraries
>>> stage 4.3: make dependencies
>>> stage 4.4: building everything

[...]
gzip -cn /src/share/man/man9/BUF_LOCKINIT.9 > BUF_LOCKINIT.9.gz
gzip -cn /src/share/man/man9/BUF_REFCNT.9 > BUF_REFCNT.9.gz
gzip -cn /src/share/man/man9/BUF_TIMELOCK.9 > BUF_TIMELOCK.9.gz
gzip -cn /src/share/man/man9/BUF_UNLOCK.9 > BUF_UNLOCK.9.gz
gzip -cn /src/share/man/man9/bus_activate_resource.9 > bus_activate_resource.9.gz
gzip -cn /src/share/man/man9/BUS_ADD_CHILD.9 > BUS_ADD_CHILD.9.gz
gzip -cn /src/share/man/man9/bus_alloc_resource.9 > bus_alloc_resource.9.gz
make: don't know how to make BUS_BIND_INTR.9. Stop
*** Error code 2

Stop in /src/share/man.
*** Error code 1

Stop in /src/share.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
TB --- 2009-10-29 16:45:45 - WARNING: /usr/bin/make returned exit code 1
TB --- 2009-10-29 16:45:45 - ERROR: failed to build world
TB --- 2009-10-29 16:45:45 - 2966.82 user 298.38 system 3496.86 real

http://tinderbox.freebsd.org/tinderbox-releng_7-RELENG_7-powerpc-powerpc.full
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Current problem reports assigned to freebsd-ppc@FreeBSD.org

2009-10-26T04:07:05Z

Re: iMac G3 -> Fatal kernel trap

2009-10-24T09:12:02Z

Fabio wrote:

> Hello,
>
> I've been trying to install FreeBSD (either 7.2 or 8rc1) on two iMacs
> G3 400Mhz (slot-loading). But I haven't succeeded yet. When booting on
> the install CD with version 7.2, it shows a "fatal kernel trap" and
> immediately reboots. As for version 8, the console freezes after a few
> seconds.
>
> I've been advised to send a problem report at this e-mail address.
> More details about this problem can be found here:
> http://forums.freebsd.org/showthread.php?p=46170#post46170
>
> I'd be happy to see freebsd work on those imacs. As a developer
> myself, I'd be pleased to help. Please let me know if there is
> anything I can do.
>
> Best regards
> Fabio

That's quite strange -- 8.0 and 7.2 both work well on the blue & white
Powermac G3s, which are very similar hardware-wise. I can't seem to view
the screenshots on the forums without an account there. Could you post
it somewhere else, or provide more detail on where it gets stuck?

You might also want to try doing 'set hw.ata.ata_dma=0' from the loader
to see if ATA DMA is causing problems when initializing the ATA bus.
-Nathan
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

iMac G3 -> Fatal kernel trap

2009-10-24T06:35:52Z

Hello,

I've been trying to install FreeBSD (either 7.2 or 8rc1) on two iMacs
G3 400Mhz (slot-loading). But I haven't succeeded yet. When booting on
the install CD with version 7.2, it shows a "fatal kernel trap" and
immediately reboots. As for version 8, the console freezes after a few
seconds.

I've been advised to send a problem report at this e-mail address.
More details about this problem can be found here:
http://forums.freebsd.org/showthread.php?p=46170#post46170

I'd be happy to see freebsd work on those imacs. As a developer
myself, I'd be pleased to help. Please let me know if there is
anything I can do.

Best regards
Fabio

_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

[head tinderbox] failure on powerpc/powerpc

2009-10-23T05:32:12Z

TB --- 2009-10-23 11:29:41 - tinderbox 2.6 running on freebsd-current.sentex.ca
TB --- 2009-10-23 11:29:41 - starting HEAD tinderbox run for powerpc/powerpc
TB --- 2009-10-23 11:29:41 - cleaning the object tree
TB --- 2009-10-23 11:29:58 - cvsupping the source tree
TB --- 2009-10-23 11:29:58 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/powerpc/powerpc/supfile
TB --- 2009-10-23 11:30:32 - building world
TB --- 2009-10-23 11:30:32 - MAKEOBJDIRPREFIX=/obj
TB --- 2009-10-23 11:30:32 - PATH=/usr/bin:/usr/sbin:/bin:/sbin
TB --- 2009-10-23 11:30:32 - TARGET=powerpc
TB --- 2009-10-23 11:30:32 - TARGET_ARCH=powerpc
TB --- 2009-10-23 11:30:32 - TZ=UTC
TB --- 2009-10-23 11:30:32 - __MAKE_CONF=/dev/null
TB --- 2009-10-23 11:30:32 - cd /src
TB --- 2009-10-23 11:30:32 - /usr/bin/make -B buildworld

>>> World build started on Fri Oct 23 11:30:32 UTC 2009
>>> Rebuilding the temporary build tree
>>> stage 1.1: legacy release compatibility shims
>>> stage 1.2: bootstrap tools
>>> stage 2.1: cleaning up the object tree
>>> stage 2.2: rebuilding the object tree
>>> stage 2.3: build tools
>>> stage 3: cross tools
>>> stage 4.1: building includes
>>> stage 4.2: building libraries
>>> stage 4.3: make dependencies
>>> stage 4.4: building everything
>>> World build completed on Fri Oct 23 12:30:01 UTC 2009

TB --- 2009-10-23 12:30:01 - generating LINT kernel config
TB --- 2009-10-23 12:30:01 - cd /src/sys/powerpc/conf
TB --- 2009-10-23 12:30:01 - /usr/bin/make -B LINT
TB --- 2009-10-23 12:30:02 - building LINT kernel
TB --- 2009-10-23 12:30:02 - MAKEOBJDIRPREFIX=/obj
TB --- 2009-10-23 12:30:02 - PATH=/usr/bin:/usr/sbin:/bin:/sbin
TB --- 2009-10-23 12:30:02 - TARGET=powerpc
TB --- 2009-10-23 12:30:02 - TARGET_ARCH=powerpc
TB --- 2009-10-23 12:30:02 - TZ=UTC
TB --- 2009-10-23 12:30:02 - __MAKE_CONF=/dev/null
TB --- 2009-10-23 12:30:02 - cd /src
TB --- 2009-10-23 12:30:02 - /usr/bin/make -B buildkernel KERNCONF=LINT
>>> Kernel build for LINT started on Fri Oct 23 12:30:02 UTC 2009
>>> stage 1: configuring the kernel
>>> stage 2.1: cleaning up the object tree
>>> stage 2.2: rebuilding the object tree
>>> stage 2.3: build tools
>>> stage 3.1: making dependencies
>>> stage 3.2: building everything
[...]
cc -c -O2 -pipe -fno-strict-aliasing -std=c99 -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -Wundef -Wno-pointer-sign -fformat-extensions -nostdinc -I. -I/src/sys -I/src/sys/contrib/altq -D_KERNEL -DHAVE_KERNEL_OPTION_HEADERS -include opt_global.h -fno-common -finline-limit=15000 --param inline-unit-growth=100 --param large-function-growth=1000 -fno-builtin -msoft-float -fno-omit-frame-pointer -msoft-float -mno-altivec -ffreestanding -fstack-protector -Werror /src/sys/cam/cam_periph.c
cc -c -O2 -pipe -fno-strict-aliasing -std=c99 -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -Wundef -Wno-pointer-sign -fformat-extensions -nostdinc -I. -I/src/sys -I/src/sys/contrib/altq -D_KERNEL -DHAVE_KERNEL_OPTION_HEADERS -include opt_global.h -fno-common -finline-limit=15000 --param inline-unit-growth=100 --param large-function-growth=1000 -fno-builtin -msoft-float -fno-omit-frame-pointer -msoft-float -mno-altivec -ffreestanding -fstack-protector -Werror /src/sys/cam/cam_queue.c
cc -c -O2 -pipe -fno-strict-aliasing -std=c99 -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -Wundef -Wno-pointer-sign -fformat-extensions -nostdinc -I. -I/src/sys -I/src/sys/contrib/altq -D_KERNEL -DHAVE_KERNEL_OPTION_HEADERS -include opt_global.h -fno-common -finline-limit=15000 --param inline-unit-growth=100 --param large-function-growth=1000 -fno-builtin -msoft-float -fno-omit-frame-pointer -msoft-float -mno-altivec -ffreestanding -fstack-protector -Werror /src/sys/cam/cam_sim.c
cc -c -O2 -pipe -fno-strict-aliasing -std=c99 -Wall -Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline -Wcast-qual -Wundef -Wno-pointer-sign -fformat-extensions -nostdinc -I. -I/src/sys -I/src/sys/contrib/altq -D_KERNEL -DHAVE_KERNEL_OPTION_HEADERS -include opt_global.h -fno-common -finline-limit=15000 --param inline-unit-growth=100 --param large-function-growth=1000 -fno-builtin -msoft-float -fno-omit-frame-pointer -msoft-float -mno-altivec -ffreestanding -fstack-protector -Werror /src/sys/cam/cam_xpt.c
/src/sys/cam/cam_xpt.c: In function 'xpt_scanner_thread':
/src/sys/cam/cam_xpt.c:815: error: 'CAM_PRIORITY_BUS' undeclared (first use in this function)
/src/sys/cam/cam_xpt.c:815: error: (Each undeclared identifier is reported only once
/src/sys/cam/cam_xpt.c:815: error: for each function it appears in.)
*** Error code 1

Stop in /obj/powerpc/src/sys/LINT.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
TB --- 2009-10-23 12:32:12 - WARNING: /usr/bin/make returned exit code 1
TB --- 2009-10-23 12:32:12 - ERROR: failed to build lint kernel
TB --- 2009-10-23 12:32:12 - 2824.41 user 545.89 system 3751.43 real

http://tinderbox.freebsd.org/tinderbox-head-HEAD-powerpc-powerpc.full
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Current problem reports assigned to freebsd-ppc@FreeBSD.org

2009-10-19T04:06:59Z

[releng_8 tinderbox] failure on powerpc/powerpc

2009-10-16T08:57:22Z

TB --- 2009-10-16 07:46:09 - tinderbox 2.6 running on freebsd-current.sentex.ca
TB --- 2009-10-16 07:46:09 - starting RELENG_8 tinderbox run for powerpc/powerpc
TB --- 2009-10-16 07:46:09 - cleaning the object tree
TB --- 2009-10-16 07:46:25 - cvsupping the source tree
TB --- 2009-10-16 07:46:25 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/RELENG_8/powerpc/powerpc/supfile
TB --- 2009-10-16 15:57:17 - WARNING: /usr/bin/csup returned exit code 1
TB --- 2009-10-16 15:57:17 - ERROR: unable to cvsup the source tree
TB --- 2009-10-16 15:57:17 - 0.83 user 7.98 system 29467.89 real

http://tinderbox.des.no/tinderbox-releng_8-RELENG_8-powerpc-powerpc.full
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Twitter-endlich Geldverdienen-kostenlos und sofort startklar

2009-10-15T06:43:29Z

Offers stand below as an English available Hallo-
                                        verdiene endlich Geld durch
Twitterwenn ein Twitter Account vorhanden sein sollte dann gehts sofort los
mit Verdienen.sollte keine Account vorhanden sein dann einfach alles
kostenlos erstellen und verdienen. mit besten Empfehlungen eure
Danielleichter kann man sein ´Geld nicht verdienen- alles kostenlos wenn
sie einen Twitteraccount haben.Also schnell handel-bei weiterem Interesse
und lust an gratis produkten einfach kurz anmelden-oder abmelden--
danke  Anmelden       Abmelden 24 Std. Blitzangebot nur begrenzt für 24
Stunden aktiv danach ausverkauft---
http://www.affiliateverkaufen.de/blitzangebot.html     10,-?(The Logo
Creator hilft beim Erstellen qualitativ hochwertiger Logos. Ganz nach dem
Motto "Your Logo is your business" gestaltet der Nutzer mit diesem Programm
Blickfänger für Webseiten) (Übersetzen Sie ganz einfach und mit wenigen
Klicks Texte oder sogar komplette Webseiten in 31 Sprachen. )nur 28,-? oder
Aktionspreis 30,-?   für Logocreator v5 und PDF-Converter 6.0 dt. Oder
möchten sie lieber effektiv heute noch Geld verdienen und Zahlungen wenn
möglich sofort erwirtschaften-??
dann mit diesem angebot was für mich selbstbehauptet das beste überhaupt
war und ist--Geld durch Emails verdienen-aber keine centbeträge sondern sofort
10-20,-? sofort-zahlung innerhalb weniger minuten, ich habe zur zeit
zwischen 5 und 20 Kunden pro tag (weltweit) bei einem verdienst pro email
von ca. 15,-?
und ich betreibe keinerlei werbung oder verkaufe durchs telefon nein die
Kunden kommen zu mir und ich verdiene sehr gut-aber lesen sie selbst wenn
ihr interesse noch vorhanden ist weiter im Angebot 2.erfolgreiches Handeln
wünsche ich auf diesem Wege-bei weiteren Interessen können sie
sichwiederholt eintragen um weitere Angebote und Gratis Geschenke zu
erhalten........................(oder Abmelden).... Anmelden     Abmelden
Hello- finally earn money by Twitterthen immediately feels wrong with
earning if a Twitter account should be available. no-one should account be
available simply then everything free of charge make and earn. with best
recommendations yours Danielone can more easily money not earning
everything be ' free if they have a Twitteraccount. -therefore act fast
simply registering or cancelling at broader interest and desire at free
products briefly, thank youBookingCancelling24 hour lightning supply sold
off according to that actively for 24 hours only restrictedly -
http://www.affiliateverkaufen.de/blitzangebot.html 10. ? (A The logo
Creator helps to make high-quality logos. According to the motto "Your logo
is your business" the user completely forms with this programme eye-catcher
for web pages.)    (Translate texts or even complete web pages for only
simply and a few clicks into 31 languages.) only 28. ? or special-offer
price 30. ? for Logocreator v5 and PDF-Converter of 6.0 dt. -or they would
rather, today, still earn money effectively and immediately gain payments
if possible?
with this supply did but no cent amounts what was self claimed for me the
best at all and is?
I have 10-20,- ? immediately payment within less minutes, between 5 and 20
customers per day (worldwide) at an income per e-mail from approx. 15. ? at
the moment
by the telephone the customers no come to me and I earn very well and I
operate no advertising or sell but read them even if their interest is
still further existing in the supply 2. Angebot 2.I wish on this at broader
interests be able to do them himself a successful action waystyping
repeated ........................ in to receive further offers and free
presents. (or cancel ) ..... Booking Cancelling

_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

[head tinderbox] failure on powerpc/powerpc

2009-10-12T21:33:26Z

TB --- 2009-10-13 04:16:58 - tinderbox 2.6 running on freebsd-current.sentex.ca
TB --- 2009-10-13 04:16:58 - starting HEAD tinderbox run for powerpc/powerpc
TB --- 2009-10-13 04:16:58 - cleaning the object tree
TB --- 2009-10-13 04:17:03 - cvsupping the source tree
TB --- 2009-10-13 04:17:03 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/powerpc/powerpc/supfile
TB --- 2009-10-13 04:17:31 - building world
TB --- 2009-10-13 04:17:31 - MAKEOBJDIRPREFIX=/obj
TB --- 2009-10-13 04:17:31 - PATH=/usr/bin:/usr/sbin:/bin:/sbin
TB --- 2009-10-13 04:17:31 - TARGET=powerpc
TB --- 2009-10-13 04:17:31 - TARGET_ARCH=powerpc
TB --- 2009-10-13 04:17:31 - TZ=UTC
TB --- 2009-10-13 04:17:31 - __MAKE_CONF=/dev/null
TB --- 2009-10-13 04:17:31 - cd /src
TB --- 2009-10-13 04:17:31 - /usr/bin/make -B buildworld

>>> World build started on Tue Oct 13 04:17:32 UTC 2009
>>> Rebuilding the temporary build tree
>>> stage 1.1: legacy release compatibility shims
>>> stage 1.2: bootstrap tools
>>> stage 2.1: cleaning up the object tree
>>> stage 2.2: rebuilding the object tree
>>> stage 2.3: build tools
>>> stage 3: cross tools
>>> stage 4.1: building includes
>>> stage 4.2: building libraries

[...]
cc -fpic -DPIC -O2 -pipe -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/gssapi -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/gssapi/krb5 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/krb5 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/asn1 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/roken -I. -DHAVE_CONFIG_H -I/src/kerberos5/lib/libgssapi_krb5/../../include -std=gnu99 -fstack-protector -c /src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/gssapi/krb5/wrap.c -o wrap.So
cc -fpic -DPIC -O2 -pipe -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/gssapi -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/gssapi/krb5 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/krb5 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/asn1 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/roken -I. -DHAVE_CONFIG_H -I/src/kerberos5/lib/libgssapi_krb5/../../include -std=gnu99 -fstack-protector -c /src/kerberos5/lib/libgssapi_krb5/gss_krb5.c -o gss_krb5.So
/src/kerberos5/lib/libgssapi_krb5/gss_krb5.c: In function 'gsskrb5_extract_authz_data_from_sec_context':
/src/kerberos5/lib/libgssapi_krb5/gss_krb5.c:591: warning: implicit declaration of function 'der_get_oid'
/src/kerberos5/lib/libgssapi_krb5/gss_krb5.c:601: warning: implicit declaration of function 'der_free_oid'
/src/kerberos5/lib/libgssapi_krb5/gss_krb5.c:614: warning: implicit declaration of function 'der_length_oid'
/src/kerberos5/lib/libgssapi_krb5/gss_krb5.c:622: warning: implicit declaration of function 'der_put_oid'
make: don't know how to make /obj/powerpc/src/tmp/usr/lib/libgssapi.a. Stop
*** Error code 2

Stop in /src.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
TB --- 2009-10-13 04:33:26 - WARNING: /usr/bin/make returned exit code 1
TB --- 2009-10-13 04:33:26 - ERROR: failed to build world
TB --- 2009-10-13 04:33:26 - 747.34 user 154.41 system 987.07 real

http://tinderbox.des.no/tinderbox-head-HEAD-powerpc-powerpc.full
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

[head tinderbox] failure on powerpc/powerpc

2009-10-12T17:08:51Z

TB --- 2009-10-12 23:52:33 - tinderbox 2.6 running on freebsd-current.sentex.ca
TB --- 2009-10-12 23:52:33 - starting HEAD tinderbox run for powerpc/powerpc
TB --- 2009-10-12 23:52:33 - cleaning the object tree
TB --- 2009-10-12 23:52:37 - cvsupping the source tree
TB --- 2009-10-12 23:52:37 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/powerpc/powerpc/supfile
TB --- 2009-10-12 23:52:59 - building world
TB --- 2009-10-12 23:52:59 - MAKEOBJDIRPREFIX=/obj
TB --- 2009-10-12 23:52:59 - PATH=/usr/bin:/usr/sbin:/bin:/sbin
TB --- 2009-10-12 23:52:59 - TARGET=powerpc
TB --- 2009-10-12 23:52:59 - TARGET_ARCH=powerpc
TB --- 2009-10-12 23:52:59 - TZ=UTC
TB --- 2009-10-12 23:52:59 - __MAKE_CONF=/dev/null
TB --- 2009-10-12 23:52:59 - cd /src
TB --- 2009-10-12 23:52:59 - /usr/bin/make -B buildworld

>>> World build started on Mon Oct 12 23:53:00 UTC 2009
>>> Rebuilding the temporary build tree
>>> stage 1.1: legacy release compatibility shims
>>> stage 1.2: bootstrap tools
>>> stage 2.1: cleaning up the object tree
>>> stage 2.2: rebuilding the object tree
>>> stage 2.3: build tools
>>> stage 3: cross tools
>>> stage 4.1: building includes
>>> stage 4.2: building libraries

[...]
cc -fpic -DPIC -O2 -pipe -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/gssapi -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/gssapi/krb5 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/krb5 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/asn1 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/roken -I. -DHAVE_CONFIG_H -I/src/kerberos5/lib/libgssapi_krb5/../../include -std=gnu99 -fstack-protector -c /src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/gssapi/krb5/wrap.c -o wrap.So
cc -fpic -DPIC -O2 -pipe -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/gssapi -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/gssapi/krb5 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/krb5 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/asn1 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/roken -I. -DHAVE_CONFIG_H -I/src/kerberos5/lib/libgssapi_krb5/../../include -std=gnu99 -fstack-protector -c /src/kerberos5/lib/libgssapi_krb5/gss_krb5.c -o gss_krb5.So
/src/kerberos5/lib/libgssapi_krb5/gss_krb5.c: In function 'gsskrb5_extract_authz_data_from_sec_context':
/src/kerberos5/lib/libgssapi_krb5/gss_krb5.c:591: warning: implicit declaration of function 'der_get_oid'
/src/kerberos5/lib/libgssapi_krb5/gss_krb5.c:601: warning: implicit declaration of function 'der_free_oid'
/src/kerberos5/lib/libgssapi_krb5/gss_krb5.c:614: warning: implicit declaration of function 'der_length_oid'
/src/kerberos5/lib/libgssapi_krb5/gss_krb5.c:622: warning: implicit declaration of function 'der_put_oid'
make: don't know how to make /obj/powerpc/src/tmp/usr/lib/libgssapi.a. Stop
*** Error code 2

Stop in /src.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
TB --- 2009-10-13 00:08:51 - WARNING: /usr/bin/make returned exit code 1
TB --- 2009-10-13 00:08:51 - ERROR: failed to build world
TB --- 2009-10-13 00:08:51 - 744.22 user 158.32 system 977.60 real

http://tinderbox.des.no/tinderbox-head-HEAD-powerpc-powerpc.full
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

[head tinderbox] failure on powerpc/powerpc

2009-10-12T12:24:14Z

TB --- 2009-10-12 19:06:59 - tinderbox 2.6 running on freebsd-current.sentex.ca
TB --- 2009-10-12 19:06:59 - starting HEAD tinderbox run for powerpc/powerpc
TB --- 2009-10-12 19:06:59 - cleaning the object tree
TB --- 2009-10-12 19:07:06 - cvsupping the source tree
TB --- 2009-10-12 19:07:06 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/powerpc/powerpc/supfile
TB --- 2009-10-12 19:07:31 - building world
TB --- 2009-10-12 19:07:31 - MAKEOBJDIRPREFIX=/obj
TB --- 2009-10-12 19:07:31 - PATH=/usr/bin:/usr/sbin:/bin:/sbin
TB --- 2009-10-12 19:07:31 - TARGET=powerpc
TB --- 2009-10-12 19:07:31 - TARGET_ARCH=powerpc
TB --- 2009-10-12 19:07:31 - TZ=UTC
TB --- 2009-10-12 19:07:31 - __MAKE_CONF=/dev/null
TB --- 2009-10-12 19:07:31 - cd /src
TB --- 2009-10-12 19:07:31 - /usr/bin/make -B buildworld

>>> World build started on Mon Oct 12 19:07:32 UTC 2009
>>> Rebuilding the temporary build tree
>>> stage 1.1: legacy release compatibility shims
>>> stage 1.2: bootstrap tools
>>> stage 2.1: cleaning up the object tree
>>> stage 2.2: rebuilding the object tree
>>> stage 2.3: build tools
>>> stage 3: cross tools
>>> stage 4.1: building includes
>>> stage 4.2: building libraries

[...]
cc -fpic -DPIC -O2 -pipe -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/gssapi -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/gssapi/krb5 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/krb5 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/asn1 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/roken -I. -DHAVE_CONFIG_H -I/src/kerberos5/lib/libgssapi_krb5/../../include -std=gnu99 -fstack-protector -c /src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/gssapi/krb5/wrap.c -o wrap.So
cc -fpic -DPIC -O2 -pipe -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/gssapi -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/gssapi/krb5 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/krb5 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/asn1 -I/src/kerberos5/lib/libgssapi_krb5/../../../crypto/heimdal/lib/roken -I. -DHAVE_CONFIG_H -I/src/kerberos5/lib/libgssapi_krb5/../../include -std=gnu99 -fstack-protector -c /src/kerberos5/lib/libgssapi_krb5/gss_krb5.c -o gss_krb5.So
/src/kerberos5/lib/libgssapi_krb5/gss_krb5.c: In function 'gsskrb5_extract_authz_data_from_sec_context':
/src/kerberos5/lib/libgssapi_krb5/gss_krb5.c:591: warning: implicit declaration of function 'der_get_oid'
/src/kerberos5/lib/libgssapi_krb5/gss_krb5.c:601: warning: implicit declaration of function 'der_free_oid'
/src/kerberos5/lib/libgssapi_krb5/gss_krb5.c:614: warning: implicit declaration of function 'der_length_oid'
/src/kerberos5/lib/libgssapi_krb5/gss_krb5.c:622: warning: implicit declaration of function 'der_put_oid'
make: don't know how to make /obj/powerpc/src/tmp/usr/lib/libgssapi.a. Stop
*** Error code 2

Stop in /src.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
TB --- 2009-10-12 19:24:14 - WARNING: /usr/bin/make returned exit code 1
TB --- 2009-10-12 19:24:14 - ERROR: failed to build world
TB --- 2009-10-12 19:24:14 - 748.28 user 155.19 system 1035.12 real

http://tinderbox.des.no/tinderbox-head-HEAD-powerpc-powerpc.full
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

[head tinderbox] failure on powerpc/powerpc

2009-10-12T06:47:06Z

TB --- 2009-10-12 13:00:00 - tinderbox 2.6 running on freebsd-current.sentex.ca
TB --- 2009-10-12 13:00:00 - starting HEAD tinderbox run for powerpc/powerpc
TB --- 2009-10-12 13:00:00 - cleaning the object tree
TB --- 2009-10-12 13:00:18 - cvsupping the source tree
TB --- 2009-10-12 13:00:18 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/powerpc/powerpc/supfile
TB --- 2009-10-12 13:00:44 - building world
TB --- 2009-10-12 13:00:44 - MAKEOBJDIRPREFIX=/obj
TB --- 2009-10-12 13:00:44 - PATH=/usr/bin:/usr/sbin:/bin:/sbin
TB --- 2009-10-12 13:00:44 - TARGET=powerpc
TB --- 2009-10-12 13:00:44 - TARGET_ARCH=powerpc
TB --- 2009-10-12 13:00:44 - TZ=UTC
TB --- 2009-10-12 13:00:44 - __MAKE_CONF=/dev/null
TB --- 2009-10-12 13:00:44 - cd /src
TB --- 2009-10-12 13:00:44 - /usr/bin/make -B buildworld

>>> World build started on Mon Oct 12 13:00:44 UTC 2009
>>> Rebuilding the temporary build tree
>>> stage 1.1: legacy release compatibility shims
>>> stage 1.2: bootstrap tools
>>> stage 2.1: cleaning up the object tree
>>> stage 2.2: rebuilding the object tree
>>> stage 2.3: build tools
>>> stage 3: cross tools
>>> stage 4.1: building includes
>>> stage 4.2: building libraries
>>> stage 4.3: make dependencies
>>> stage 4.4: building everything

[...]
/src/sbin/ifconfig/ifieee80211.c:2634: warning: passing argument 1 of 'memcmp' makes pointer from integer without a cast
/src/sbin/ifconfig/ifieee80211.c:2636: warning: passing argument 1 of 'memcmp' makes pointer from integer without a cast
/src/sbin/ifconfig/ifieee80211.c:2638: warning: passing argument 1 of 'memcmp' makes pointer from integer without a cast
/src/sbin/ifconfig/ifieee80211.c:2639: warning: passing argument 1 of 'memcmp' makes pointer from integer without a cast
/src/sbin/ifconfig/ifieee80211.c:2641: warning: passing argument 1 of 'memcmp' makes pointer from integer without a cast
/src/sbin/ifconfig/ifieee80211.c:2642: warning: passing argument 1 of 'memcmp' makes pointer from integer without a cast
/src/sbin/ifconfig/ifieee80211.c:2644: warning: passing argument 1 of 'memcmp' makes pointer from integer without a cast
/src/sbin/ifconfig/ifieee80211.c:2645: warning: passing argument 1 of 'memcmp' makes pointer from integer without a cast
*** Error code 1

Stop in /src/sbin/ifconfig.
*** Error code 1

Stop in /obj/powerpc/src/rescue/rescue.
*** Error code 1

Stop in /src/rescue/rescue.
*** Error code 1

Stop in /src/rescue.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
TB --- 2009-10-12 13:47:06 - WARNING: /usr/bin/make returned exit code 1
TB --- 2009-10-12 13:47:06 - ERROR: failed to build world
TB --- 2009-10-12 13:47:06 - 2190.93 user 424.20 system 2825.24 real

http://tinderbox.des.no/tinderbox-head-HEAD-powerpc-powerpc.full
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Current problem reports assigned to freebsd-ppc@FreeBSD.org

2009-10-12T04:06:59Z

Quer me conhecer ?

2009-10-05T19:52:24Z

#[1]ICRA labels

[2]Swingers, Chat Adulto Gratuito & Site de Relacionamento Adulto -
Adult FriendFinder
Swingers, Chat Adulto Gratuito & Site de Relacionamento Adulto

[glean.gif?rand=6127&site=ffadult&session=GNAbECd%40K%3B%3Eh+124593067
2+189.31.62.94+&pwsid=&pagename=ttp%3A%2F%2Fwww.google.com.br%2Fsearch
&pagestate=&country=Brazil&city=&lang=portuguese&level=&gpid=g314429&p
id=g314429.subgoogle4]

[3]Conheça uma parceira sexual ou outros swingers como ela hoje à
noite e participe Adult FriendFinder. Olhe sua fonte final para Rede
Social Adulta, Sensual Namoros e Sexo Pessoal.
[4]Encontre sócios reais de sexo está noite! Junta-se ao Adult
FriendFinder, a maior rede de encontros sociais do mundo, Sexy
Encontros e Sexy Pessoas, gratuito com mais de 20 milhões de usuários.
[5]Quer encontrar uma parceira sexual como ela hoje à noite? Junte-se
à Adult FriendFinder e navegue gratuitamente e encontre aquela
compatibilidade excitada para você!

References

Visible links
1. http://graphics.pop6.com/images/ICRA_labels_rdf_adult.rdf
2. http://adultfriendfinder.com/go/g1114408
3. http://adultfriendfinder.com/go/g1114408
4. http://adultfriendfinder.com/go/g1114408
5. http://adultfriendfinder.com/go/g1114408

Hidden links:
6. http://adultfriendfinder.com/p/register.cgi?who=UmFuZG9tSVYUpehifN_D7VR_QVUJhm03H9VYqf/SWm4B3Z53sbIy7YIP/gbo2jcwKyJkLdHRy5BC1OkN6e5tfFR0sbFpAFZB0bQ5IRrl0uhTpA5Ox4O6LaMq8UA2akqTHYSkAwny9YGQTZcSFwtRsP24v30Iz6H_9RfhQXiCUyJCqvLnofBNWc67Wa1IHcTv3Shd4y1lq/Kl8FwJ79/dcBV1Ka2rV_cjKpodVxU6iP4-&site=ffadult
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Current problem reports assigned to freebsd-ppc@FreeBSD.org

2009-10-05T04:06:58Z

Re: RFC/H gdb6 port for powerpc

2009-09-29T16:03:07Z

On Sep 29, 2009, at 2:00 PM, Andreas Tobler wrote:

> Hi all,
>
> I sent this mail out to Marcel but I did not get any feedback. Might
> be due to mailer issues, I do not know.

Workload... sorry about that...

--
Marcel Moolenaar
xcllnt@...

_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Re: RFC/H gdb6 port for powerpc

2009-09-29T14:27:42Z

Hi Justin,

Justin Hibbits wrote:

> Thanks for taking on this port, maybe it'll fix the bug I filed against
> the base gdb. I'll give it a shot when I get some time to test it.
> Have you looked at any of the other BSDs for the necessary missing pieces?
>

yes, I did, and it was quite irritating to rely either on obsd or nbsd.
Obsd has a different ABI here, and nbsd too, we, fbsd lack the altivec
regs in reg(s).h.

My questions are in terms of signal handling and stack unwinding. How do
we do that, what are the 'correct' entry points etc.

I have to admit, I solved my thunderbird issue :) I could step into the
functions, even assembler stuff.

But the confusing part is the testsuite which makes me unsure and the
fact that we do not store/giving access to altivec regs, Nathan?

Thanks for the response,
Andreas
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Re: RFC/H gdb6 port for powerpc

2009-09-29T14:13:25Z

On Tue, Sep 29, 2009 at 5:00 PM, Andreas Tobler <andreast-list@...>wrote:

> Hi all,
>
> I sent this mail out to Marcel but I did not get any feedback. Might be due
> to mailer issues, I do not know.
>
> I learned today, that I do not receive all mails directed to me. So I try
> to spread some request for comment/help here.
>
> I recently tried to get thunderbird working on powerpc. I was blocked and I
> needed a debugger. The current gdb in base terminates immediatley if I try
> to debug such a beast as thunderbird.
>
> So I went ahead and tried to bring gdb6 (from ports, 6.6.1) into a working
> state.
>
> I think I succeeded somehow, but I need some more help.
>
> Attached you'll find two files which you can put into the ports files
> directory of gdb6. (files)
>
>
> My issues I have are seen when you run 'gmake check' inside the gdb build
> directory.
> There are a lot of signal stuff which does not work. Also unwinding seems
> not in good shape.
>
> My request here on this list is, can anybody help guiding me on the missing
> bits?
>
> I'd appreciate any comments here, from gth to 'you could do this better' or
> anything else, but please respond.
>
> TIA,
> Andreas
>

Hi Andreas,

Thanks for taking on this port, maybe it'll fix the bug I filed against the
base gdb. I'll give it a shot when I get some time to test it. Have you
looked at any of the other BSDs for the necessary missing pieces?

- Justin
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

RFC/H gdb6 port for powerpc

2009-09-29T14:00:58Z

Hi all,

I sent this mail out to Marcel but I did not get any feedback. Might be
due to mailer issues, I do not know.

I learned today, that I do not receive all mails directed to me. So I
try to spread some request for comment/help here.

I recently tried to get thunderbird working on powerpc. I was blocked
and I needed a debugger. The current gdb in base terminates immediatley
if I try to debug such a beast as thunderbird.

So I went ahead and tried to bring gdb6 (from ports, 6.6.1) into a
working state.

I think I succeeded somehow, but I need some more help.

Attached you'll find two files which you can put into the ports files
directory of gdb6. (files)

My issues I have are seen when you run 'gmake check' inside the gdb
build directory.
There are a lot of signal stuff which does not work. Also unwinding
seems not in good shape.

My request here on this list is, can anybody help guiding me on the
missing bits?

I'd appreciate any comments here, from gth to 'you could do this better'
or anything else, but please respond.

TIA,
Andreas

P.S, here the summary of gmake check:

=== gdb Summary ===

# of expected passes 10484
# of unexpected failures 196
# of expected failures 41
# of known failures 62
# of unresolved testcases 1
# of untested testcases 13
# of unsupported tests 14

--- ./gdb/ppcfbsd-nat.c.orig 2009-09-14 10:22:36.000000000 +0200
+++ ./gdb/ppcfbsd-nat.c 2009-09-14 10:22:36.000000000 +0200
@@ -0,0 +1,159 @@
+/* Native-dependent code for PowerPC's running FreeBSD, for GDB.
+ Copyright 2002, 2004 Free Software Foundation, Inc.
+ Contributed by Wasabi Systems, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
+
+#include <sys/types.h>
+#include <sys/ptrace.h>
+#include <machine/reg.h>
+#include <machine/frame.h>
+
+#include "defs.h"
+#include "inferior.h"
+#include "inf-ptrace.h"
+#include "gdb_assert.h"
+#include "gdbcore.h"
+#include "regcache.h"
+
+#include "ppc-tdep.h"
+#include "ppcfbsd-tdep.h"
+
+
+static int
+getfpregs_supplies (int regno)
+{
+ struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch);
+
+ /* FIXME: jimb/2004-05-05: Some PPC variants don't have floating
+ point registers. Traditionally, GDB's register set has still
+ listed the floating point registers for such machines, so this
+ code is harmless. However, the new E500 port actually omits the
+ floating point registers entirely from the register set --- they
+ don't even have register numbers assigned to them.
+
+ It's not clear to me how best to update this code, so this assert
+ will alert the first person to encounter the NetBSD/E500
+ combination to the problem. */
+ gdb_assert (ppc_floating_point_unit_p (current_gdbarch));
+
+ return ((regno >= tdep->ppc_fp0_regnum
+ && regno < tdep->ppc_fp0_regnum + ppc_num_fprs)
+ || regno == tdep->ppc_fpscr_regnum);
+}
+
+static void
+ppcfbsd_fetch_inferior_registers (int regno)
+{
+ struct reg regs;
+
+ if (ptrace (PT_GETREGS, PIDGET (inferior_ptid),
+ (PTRACE_TYPE_ARG3) ®s, 0) == -1)
+ perror_with_name (_("Couldn't get registers"));
+
+ ppc_supply_gregset (&ppcfbsd_gregset, current_regcache, regno,
+ ®s, sizeof regs);
+
+ if (regno == -1 || getfpregs_supplies (regno))
+ {
+ struct fpreg fpregs;
+
+ if (ptrace (PT_GETFPREGS, PIDGET (inferior_ptid),
+ (PTRACE_TYPE_ARG3) &fpregs, 0) == -1)
+ perror_with_name (_("Couldn't get FP registers"));
+
+ ppc_supply_fpregset (&ppcfbsd_fpregset, current_regcache, regno,
+ &fpregs, sizeof fpregs);
+ }
+}
+
+static void
+ppcfbsd_store_inferior_registers (int regno)
+{
+ struct reg regs;
+
+ if (ptrace (PT_GETREGS, PIDGET (inferior_ptid),
+ (PTRACE_TYPE_ARG3) ®s, 0) == -1)
+ perror_with_name (_("Couldn't get registers"));
+
+ ppc_collect_gregset (&ppcfbsd_gregset, current_regcache,
+ regno, ®s, sizeof regs);
+
+ if (ptrace (PT_SETREGS, PIDGET (inferior_ptid),
+ (PTRACE_TYPE_ARG3) ®s, 0) == -1)
+ perror_with_name (_("Couldn't write registers"));
+
+
+ if (regno == -1 || getfpregs_supplies (regno))
+ {
+ struct fpreg fpregs;
+
+ if (ptrace (PT_GETFPREGS, PIDGET (inferior_ptid),
+ (PTRACE_TYPE_ARG3) &fpregs, 0) == -1)
+ perror_with_name (_("Couldn't get FP registers"));
+
+ ppc_collect_fpregset (&ppcfbsd_fpregset, current_regcache,
+ regno, &fpregs, sizeof fpregs);
+
+ if (ptrace (PT_SETFPREGS, PIDGET (inferior_ptid),
+ (PTRACE_TYPE_ARG3) &fpregs, 0) == -1)
+ perror_with_name (_("Couldn't set FP registers"));
+ }
+}
+
+/* Provide a prototype to silence -Wmissing-prototypes. */
+void _initialize_ppcfbsd_nat (void);
+
+void
+_initialize_ppcfbsd_nat (void)
+{
+ struct target_ops *t;
+ /* Support debugging kernel virtual memory images. */
+ /* bsd_kvm_add_target (ppcnbsd_supply_pcb); */
+
+ /* Add in local overrides. */
+ t = inf_ptrace_target ();
+ t->to_fetch_registers = ppcfbsd_fetch_inferior_registers;
+ t->to_store_registers = ppcfbsd_store_inferior_registers;
+ add_target (t);
+
+ /* General-purpose registers. */
+ ppcfbsd_reg_offsets.r0_offset = offsetof (struct reg, fixreg);
+ ppcfbsd_reg_offsets.lr_offset = offsetof (struct reg, lr);
+ ppcfbsd_reg_offsets.cr_offset = offsetof (struct reg, cr);
+ /* ppcfbsd_reg_offsets.ps_offset = offsetof (struct reg, ps); */
+ ppcfbsd_reg_offsets.xer_offset = offsetof (struct reg, xer);
+ ppcfbsd_reg_offsets.ctr_offset = offsetof (struct reg, ctr);
+ ppcfbsd_reg_offsets.pc_offset = offsetof (struct reg, pc);
+
+ /* ppcfbsd_reg_offsets.mq_offset = offsetof (struct reg, mq); */
+
+ /* Floating-point registers. */
+ /* ppcfbsd_reg_offsets.f0_offset = offsetof (struct reg, fpreg); */
+ /* ppcfbsd_reg_offsets.fpscr_offset = -1; */
+
+#ifdef PT_GETFPREGS
+ ppcfbsd_fpreg_offsets.f0_offset = offsetof (struct fpreg, fpreg);
+ ppcfbsd_fpreg_offsets.fpscr_offset = offsetof (struct fpreg, fpscr);
+#endif
+
+ /* AltiVec registers. */
+ /* ppcfbsd_reg_offsets.vr0_offset = offsetof (struct vreg, vreg); */
+ /* ppcfbsd_reg_offsets.vscr_offset = offsetof (struct vreg, vscr); */
+ /* ppcfbsd_reg_offsets.vrsave_offset = offsetof (struct vreg, vrsave); */
+}
--- ./gdb/ppcfbsd-tdep.h.orig 2009-09-14 10:22:36.000000000 +0200
+++ ./gdb/ppcfbsd-tdep.h 2009-09-14 10:22:36.000000000 +0200
@@ -0,0 +1,37 @@
+/* Common target dependent code for GDB on PowerPC systems running FreeBSD.
+ Copyright 2002 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
+
+#ifndef PPCFBSD_TDEP_H
+#define PPCFBSD_TDEP_H
+
+#include <stddef.h>
+
+struct regset;
+struct regcache;
+
+/* Register offsets for FreeBSD/powerpc. */
+extern struct ppc_reg_offsets ppcfbsd_reg_offsets;
+extern struct ppc_reg_offsets ppcfbsd_fpreg_offsets;
+
+/* Register sets for FreeBSD/powerpc. */
+extern struct regset ppcfbsd_gregset;
+extern struct regset ppcfbsd_fpregset;
+
+#endif /* PPCFBSD_TDEP_H */
--- ./gdb/ppcfbsd-tdep.c.orig 2009-09-14 10:22:36.000000000 +0200
+++ ./gdb/ppcfbsd-tdep.c 2009-09-14 10:22:36.000000000 +0200
@@ -0,0 +1,233 @@
+/* Target-dependent code for PowerPC systems running FreeBSD.
+
+ Copyright 2002, 2003, 2004 Free Software Foundation, Inc.
+
+ Contributed by Wasabi Systems, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
+
+#include "defs.h"
+#include "arch-utils.h"
+#include "floatformat.h"
+#include "frame.h"
+#include "trad-frame.h"
+#include "osabi.h"
+#include "regcache.h"
+#include "regset.h"
+#include "symtab.h"
+#include "frame-unwind.h"
+#include "tramp-frame.h"
+
+#include "gdb_assert.h"
+#include "gdb_string.h"
+
+#include "ppc-tdep.h"
+#include "ppcfbsd-tdep.h"
+#include "solib-svr4.h"
+
+/* Register offsets from <machine/reg.h>. */
+struct ppc_reg_offsets ppcfbsd_reg_offsets;
+struct ppc_reg_offsets ppcfbsd_fpreg_offsets;
+
+/* FreeBSD/powerpc register set. */
+
+struct regset ppcfbsd_gregset =
+{
+ &ppcfbsd_reg_offsets,
+ ppc_supply_gregset
+};
+
+struct regset ppcfbsd_fpregset =
+{
+ &ppcfbsd_fpreg_offsets,
+ ppc_supply_fpregset
+};
+
+/* Return the appropriate register set for the core section identified
+ by SECT_NAME and SECT_SIZE. */
+
+static const struct regset *
+ppcfbsd_regset_from_core_section (struct gdbarch *gdbarch,
+ const char *sect_name, size_t sect_size)
+{
+ if (strcmp (sect_name, ".reg") == 0 && sect_size >= 148)
+ return &ppcfbsd_gregset;
+
+ if (strcmp (sect_name, ".reg2") == 0 && sect_size >= 264)
+ return &ppcfbsd_fpregset;
+
+ return NULL;
+}
+
+/* Default page size. */
+static const int ppcfbsd_page_size = 2048;
+
+/* Offset for sigreturn(2). */
+static const int ppcfbsd_sigreturn_offset[] = {
+ 0x0c, /* FreeBSD */
+ -1
+};
+
+static int
+ppcfbsd_sigtramp_p (struct frame_info *next_frame)
+{
+ CORE_ADDR pc = frame_pc_unwind (next_frame);
+ CORE_ADDR start_pc = (pc & ~(ppcfbsd_page_size - 1));
+ const int *offset;
+ char *name;
+
+ find_pc_partial_function (pc, &name, NULL, NULL);
+ if (name)
+ return 0;
+
+ for (offset = ppcfbsd_sigreturn_offset; *offset != -1; offset++)
+ {
+ gdb_byte buf[2 * PPC_INSN_SIZE];
+ unsigned long insn;
+
+ if (!safe_frame_unwind_memory (next_frame, start_pc + *offset,
+ buf, sizeof buf))
+ continue;
+
+ /* Check for "li r0,SYS_sigreturn". */
+ insn = extract_unsigned_integer (buf, PPC_INSN_SIZE);
+ if (insn != 0x380001a1)
+ continue;
+
+ /* Check for "sc". */
+ insn = extract_unsigned_integer (buf + PPC_INSN_SIZE, PPC_INSN_SIZE);
+ if (insn != 0x44000002)
+ continue;
+
+ return 1;
+ }
+
+ return 0;
+}
+
+/* Signal trampolines. */
+
+static void
+ppcfbsd_sigtramp_cache_init (const struct tramp_frame *self,
+ struct frame_info *next_frame,
+ struct trad_frame_cache *this_cache,
+ CORE_ADDR func)
+{
+ struct gdbarch *gdbarch = get_frame_arch (next_frame);
+ struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+ CORE_ADDR addr, base;
+ int i;
+
+ base = frame_unwind_register_unsigned (next_frame, SP_REGNUM);
+ addr = base + 0x10 + 2 * tdep->wordsize;
+ for (i = 0; i < ppc_num_gprs; i++, addr += tdep->wordsize)
+ {
+ int regnum = i + tdep->ppc_gp0_regnum;
+ trad_frame_set_reg_addr (this_cache, regnum, addr);
+ }
+ trad_frame_set_reg_addr (this_cache, tdep->ppc_lr_regnum, addr);
+ addr += tdep->wordsize;
+ trad_frame_set_reg_addr (this_cache, tdep->ppc_cr_regnum, addr);
+ addr += tdep->wordsize;
+ trad_frame_set_reg_addr (this_cache, tdep->ppc_xer_regnum, addr);
+ addr += tdep->wordsize;
+ trad_frame_set_reg_addr (this_cache, tdep->ppc_ctr_regnum, addr);
+ addr += tdep->wordsize;
+ trad_frame_set_reg_addr (this_cache, PC_REGNUM, addr); /* SRR0? */
+ addr += tdep->wordsize;
+
+ /* Construct the frame ID using the function start. */
+ trad_frame_set_id (this_cache, frame_id_build (base, func));
+}
+
+static const struct tramp_frame ppcfbsd_sigtramp =
+{
+ SIGTRAMP_FRAME,
+ 4,
+ {
+ { 0x3821fff0, -1 }, /* add r1,r1,-16 */
+ { 0x4e800021, -1 }, /* blrl */
+ { 0x38610018, -1 }, /* addi r3,r1,24 */
+ { 0x380001a1, -1 }, /* li r0,417 */
+ { 0x44000002, -1 }, /* sc */
+ { 0x38000001, -1 }, /* li r0,1 */
+ { 0x44000002, -1 }, /* sc */
+ { TRAMP_SENTINEL_INSN, -1 }
+ },
+ ppcfbsd_sigtramp_cache_init
+};
+
+static void
+ppcfbsd_init_abi (struct gdbarch_info info,
+ struct gdbarch *gdbarch)
+{
+
+ /* FreeBSD doesn't support the 128-bit `long double' from the psABI. */
+ set_gdbarch_long_double_bit (gdbarch, 64);
+ set_gdbarch_long_double_format (gdbarch, &floatformat_ieee_double_big);
+
+ /* FreeBSD currently uses a broken GCC. */
+ set_gdbarch_return_value (gdbarch, ppc_sysv_abi_broken_return_value);
+
+ set_solib_svr4_fetch_link_map_offsets (gdbarch,
+ svr4_ilp32_fetch_link_map_offsets);
+ set_gdbarch_regset_from_core_section
+ (gdbarch, ppcfbsd_regset_from_core_section);
+
+ tramp_frame_prepend_unwinder (gdbarch, &ppcfbsd_sigtramp);
+
+
+}
+
+/* Provide a prototype to silence -Wmissing-prototypes. */
+void _initialize_ppcfbsd_tdep (void);
+
+void
+_initialize_ppcfbsd_tdep (void)
+{
+ gdbarch_register_osabi (bfd_arch_rs6000, 0, GDB_OSABI_FREEBSD_ELF,
+ ppcfbsd_init_abi);
+ gdbarch_register_osabi (bfd_arch_powerpc, 0, GDB_OSABI_FREEBSD_ELF,
+ ppcfbsd_init_abi);
+
+ /* Avoid initializing the register offsets again if they were
+ already initailized by ppcnbsd-nat.c. */
+ if (ppcfbsd_reg_offsets.pc_offset == 0)
+ {
+ /* General-purpose registers. */
+ ppcfbsd_reg_offsets.r0_offset = 0;
+ ppcfbsd_reg_offsets.lr_offset = 128;
+ ppcfbsd_reg_offsets.cr_offset = 132;
+ ppcfbsd_reg_offsets.xer_offset = 136;
+ ppcfbsd_reg_offsets.ctr_offset = 140;
+ ppcfbsd_reg_offsets.pc_offset = 144;
+ ppcfbsd_reg_offsets.ps_offset = -1;
+ ppcfbsd_reg_offsets.mq_offset = -1;
+
+ if (ppcfbsd_fpreg_offsets.fpscr_offset == 0)
+ {
+ /* Floating-point registers. */
+ ppcfbsd_reg_offsets.f0_offset = 0;
+ ppcfbsd_reg_offsets.fpscr_offset = 256;
+ }
+ /* AltiVec registers. */
+ ppcfbsd_reg_offsets.vr0_offset = -1;
+ ppcfbsd_reg_offsets.vrsave_offset = -1;
+ ppcfbsd_reg_offsets.vscr_offset = -1;
+ }
+}
--- ./gdb/config/powerpc/nm-fbsd.h.orig 2009-09-14 10:24:03.000000000 +0200
+++ ./gdb/config/powerpc/nm-fbsd.h 2009-09-14 10:24:03.000000000 +0200
@@ -0,0 +1,20 @@
+/* GNU GPL */
+
+#ifndef NM_FBSD_H
+#define NM_FBSD_H
+
+/* Type of the third argument to the `ptrace' system call. */
+/* #define PTRACE_ARG3_TYPE caddr_t */
+
+/* Override copies of {fetch,store}_inferior_registers in `infptrace.c'. */
+/* #define FETCH_INFERIOR_REGISTERS */
+
+/* We can attach and detach. */
+/* #define ATTACH_DETACH */
+
+/* Override child_pid_to_exec_file in 'inftarg.c'. */
+/*#define CHILD_PID_TO_EXEC_FILE */
+
+#define TEXT_SEGMENT_BASE 0x10000000
+
+#endif /* NM_FBSD_H */
--- ./gdb/config/powerpc/fbsd.mh.orig 2009-09-14 10:23:26.000000000 +0200
+++ ./gdb/config/powerpc/fbsd.mh 2009-09-14 10:23:26.000000000 +0200
@@ -0,0 +1,6 @@
+# Host: FreeBSD/powerpc
+NATDEPFILES= fork-child.o gcore.o \
+ inf-ptrace.o ppcfbsd-nat.o bsd-kvm.o
+
+NAT_FILE = nm-fbsd.h
+LOADLIBES= -lkvm
--- ./gdb/config/powerpc/fbsd.mt.orig 2009-09-14 10:23:25.000000000 +0200
+++ ./gdb/config/powerpc/fbsd.mt 2009-09-14 10:23:26.000000000 +0200
@@ -0,0 +1,5 @@
+# Target: FreeBSD/powerpc
+TDEPFILES= rs6000-tdep.o ppc-sysv-tdep.o ppcfbsd-tdep.o \
+ corelow.o solib.o solib-svr4.o
+
+TM_FILE= tm-ppc-eabi.h
\ No newline at end of file

--- ./gdb/configure.host.orig 2006-11-24 20:54:15.000000000 +0100
+++ ./gdb/configure.host 2009-09-14 10:13:50.000000000 +0200
@@ -109,6 +109,7 @@
mips64*-*-openbsd*) gdb_host=obsd64 ;;

powerpc-*-aix*) gdb_host=aix ;;
+powerpc-*-freebsd*) gdb_host=fbsd ;;
powerpc-*-linux*) gdb_host=linux ;;
powerpc-*-netbsd* | powerpc-*-knetbsd*-gnu)
gdb_host=nbsd ;;
--- ./gdb/configure.tgt.orig 2006-11-24 21:11:07.000000000 +0100
+++ ./gdb/configure.tgt 2009-09-14 10:13:27.000000000 +0200
@@ -155,6 +155,7 @@

mt-*-*) gdb_target=mt ;;

+powerpc-*-freebsd*) gdb_target=fbsd ;;
powerpc-*-netbsd* | powerpc-*-knetbsd*-gnu)
gdb_target=nbsd ;;
powerpc-*-openbsd*) gdb_target=obsd ;;
--- gdb/Makefile.in.orig 2009-09-14 19:56:00.000000000 +0200
+++ gdb/Makefile.in 2009-09-14 19:56:09.000000000 +0200
@@ -766,6 +766,7 @@
osabi_h = osabi.h
parser_defs_h = parser-defs.h $(doublest_h)
p_lang_h = p-lang.h
+ppcfbsd_tdep_h = ppcfbsd-tdep.h
ppcnbsd_tdep_h = ppcnbsd-tdep.h
ppcobsd_tdep_h = ppcobsd-tdep.h
ppc_tdep_h = ppc-tdep.h
@@ -1478,6 +1479,7 @@
somread.c solib-som.c $(HPREAD_SOURCE) \
posix-hdep.c \
ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
+ ppcfbsd-nat.c ppcfbsd-tdep.c \
ppcnbsd-nat.c ppcnbsd-tdep.c \
ppcobsd-nat.c ppcobsd-tdep.c \
procfs.c \
@@ -2456,6 +2458,13 @@
$(objfiles_h) $(regcache_h) $(value_h) $(osabi_h) $(regset_h) \
$(solib_svr4_h) $(ppc_tdep_h) $(trad_frame_h) $(frame_unwind_h) \
$(tramp_frame_h)
+ppcfbsd-nat.o: ppcfbsd-nat.c $(defs_h) $(inferior_h) $(gdb_assert_h) \
+ $(gdbcore_h) $(regcache_h) $(bsd_kvm_h) $(ppc_tdep_h) \
+ $(ppcfbsd_tdep_h) $(inf_ptrace_h)
+ppcfbsd-tdep.o: ppcfbsd-tdep.c $(defs_h) $(gdbcore_h) $(gdb_types_h) \
+ $(osabi_h) $(regcache_h) $(regset_h) $(trad_frame_h) \
+ $(tramp_frame_h) $(gdb_assert_h) $(gdb_string_h) \
+ $(ppc_tdep_h) $(ppcfbsd_tdep_h) $(solib_svr4_h)
ppcnbsd-nat.o: ppcnbsd-nat.c $(defs_h) $(inferior_h) $(gdb_assert_h) \
$(gdbcore_h) $(regcache_h) $(bsd_kvm_h) $(ppc_tdep_h) \
$(ppcnbsd_tdep_h) $(inf_ptrace_h)

_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Re: thunderbird port

2009-09-29T08:35:05Z

Nathan Whitehorn wrote:

> Andreas Tobler wrote:
>> Hi Peter,
>>
>> Peter Grehan wrote:
>>>> in case someone is interested....
>>> Certainly am ! I'll give it a try.
>> Please follow the thread,
>>
>> http://lists.freebsd.org/pipermail/freebsd-gecko/2009-September/000350.html
>>
>>
>> The bsd.gecko.mk is not needed for this build if you apply the above
>> patch to the toplevel Makefile in thunderbird.
>>
>> Btw, firefox35 should also build and run. Already committed to ports
>> by beat.
> Thanks so much for this! It's very nice to have thunderbird and recent
> firefox running on my laptop.

Btw, both are in the ports-tree now.

Happy to see people using it!

Andreas
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Re: thunderbird port

2009-09-29T06:47:37Z

Andreas Tobler wrote:

> Hi Peter,
>
> Peter Grehan wrote:
>>> in case someone is interested....
>>
>> Certainly am ! I'll give it a try.
>
> Please follow the thread,
>
> http://lists.freebsd.org/pipermail/freebsd-gecko/2009-September/000350.html
>
>
> The bsd.gecko.mk is not needed for this build if you apply the above
> patch to the toplevel Makefile in thunderbird.
>
> Btw, firefox35 should also build and run. Already committed to ports
> by beat.

Thanks so much for this! It's very nice to have thunderbird and recent
firefox running on my laptop.
-Nathan
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."

Current problem reports assigned to freebsd-ppc@FreeBSD.org

2009-09-28T04:07:01Z

[head tinderbox] failure on powerpc/powerpc

2009-09-27T15:35:17Z

TB --- 2009-09-27 22:12:35 - tinderbox 2.6 running on freebsd-current.sentex.ca
TB --- 2009-09-27 22:12:35 - starting HEAD tinderbox run for powerpc/powerpc
TB --- 2009-09-27 22:12:35 - cleaning the object tree
TB --- 2009-09-27 22:16:49 - cvsupping the source tree
TB --- 2009-09-27 22:16:49 - /usr/bin/csup -z -r 3 -g -L 1 -h cvsup.sentex.ca /tinderbox/HEAD/powerpc/powerpc/supfile
TB --- 2009-09-27 22:18:49 - building world
TB --- 2009-09-27 22:18:49 - MAKEOBJDIRPREFIX=/obj
TB --- 2009-09-27 22:18:49 - PATH=/usr/bin:/usr/sbin:/bin:/sbin
TB --- 2009-09-27 22:18:49 - TARGET=powerpc
TB --- 2009-09-27 22:18:49 - TARGET_ARCH=powerpc
TB --- 2009-09-27 22:18:49 - TZ=UTC
TB --- 2009-09-27 22:18:49 - __MAKE_CONF=/dev/null
TB --- 2009-09-27 22:18:49 - cd /src
TB --- 2009-09-27 22:18:49 - /usr/bin/make -B buildworld

>>> World build started on Sun Sep 27 22:18:50 UTC 2009
>>> Rebuilding the temporary build tree
>>> stage 1.1: legacy release compatibility shims
>>> stage 1.2: bootstrap tools
>>> stage 2.1: cleaning up the object tree
>>> stage 2.2: rebuilding the object tree
>>> stage 2.3: build tools
>>> stage 3: cross tools
>>> stage 4.1: building includes
>>> stage 4.2: building libraries

[...]
sh /src/tools/install.sh -o root -g wheel -m 444 ca_ES.ISO8859-1.cat /obj/powerpc/src/tmp/usr/share/nls/ca_ES.ISO8859-1/libc.cat
sh /src/tools/install.sh -o root -g wheel -m 444 de_DE.ISO8859-1.cat /obj/powerpc/src/tmp/usr/share/nls/de_DE.ISO8859-1/libc.cat
sh /src/tools/install.sh -o root -g wheel -m 444 el_GR.ISO8859-7.cat /obj/powerpc/src/tmp/usr/share/nls/el_GR.ISO8859-7/libc.cat
sh /src/tools/install.sh -o root -g wheel -m 444 es_ES.ISO8859-1.cat /obj/powerpc/src/tmp/usr/share/nls/es_ES.ISO8859-1/libc.cat
sh /src/tools/install.sh -o root -g wheel -m 444 fi_FI.ISO8859-1.cat /obj/powerpc/src/tmp/usr/share/nls/fi_FI.ISO8859-1/libc.cat
sh /src/tools/install.sh -o root -g wheel -m 444 fr_FR.ISO8859-1.cat /obj/powerpc/src/tmp/usr/share/nls/fr_FR.ISO8859-1/libc.cat
sh /src/tools/install.sh -o root -g wheel -m 444 gl_ES.ISO8859-1.cat /obj/powerpc/src/tmp/usr/share/nls/gl_ES.ISO8859-1/libc.cat
install: /obj/powerpc/src/tmp/usr/share/nls/gl_ES.ISO8859-1/libc.cat: No such file or directory
*** Error code 71

Stop in /src/lib/libc.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
*** Error code 1

Stop in /src.
TB --- 2009-09-27 22:35:17 - WARNING: /usr/bin/make returned exit code 1
TB --- 2009-09-27 22:35:17 - ERROR: failed to build world
TB --- 2009-09-27 22:35:17 - 519.66 user 108.44 system 1361.67 real

http://tinderbox.des.no/tinderbox-head-HEAD-powerpc-powerpc.full
_______________________________________________
freebsd-ppc@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-ppc
To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@..."