Nabble - freebsd-usb

Re: [keyboard] ukbd stops working after filesystems mount at boot time

2009-11-21T13:59:00Z

On Saturday 21 November 2009 19:12:45 Travelling Particle wrote:

> On Fri, Nov 20, 2009 at 2:24 PM, Hans Petter Selasky
> <hselasky@...>wrote:
>
>
> There was a recent EHCI interrupt patch. I'm not sure if it is committed to
>
> > 9-
> > current yet.
>
> Do you mean there was a patch that might have caused this problem, or the
> patch fixing this problem? Also, I'm on 8-RC3, not 9-CURRENT
>

I mean fixing.

--HPS
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: [keyboard] ukbd stops working after filesystems mount at boot time

2009-11-21T10:12:45Z

On Fri, Nov 20, 2009 at 2:24 PM, Hans Petter Selasky <hselasky@...>wrote:

There was a recent EHCI interrupt patch. I'm not sure if it is committed to
> 9-
> current yet.
>

Do you mean there was a patch that might have caused this problem, or the
patch fixing this problem? Also, I'm on 8-RC3, not 9-CURRENT

Vassiliy
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: FreeBSD - support for DisplayLink devices?

2009-11-20T15:03:08Z

On Thu, 19 Nov 2009 11:08:55 +1300
Andrew Thompson <thompsa@...> wrote:

> libdlo mentioned in the original email is a userland driver using
> libusb. It should just work.

I've tried with just './configure' and
./configure --includedir=/usr/local/include
./configure --includedir=/usr/local/include --libdir=/usr/local/lib

but all bombs out with this:
checking for usb_open in -lusb... no
checking for usb_get_driver_np... no
configure: error: Can't find libusb. On ubuntu, try sudo apt-get install libusb-dev

> Note for FreeBSD 7 and below you will need to install the devel/libusb
> port.

libusb in ports is currently at version 0.1.12_4, I don't know if that
affects anything, but the libdlo page says "libusb (0.13)".
--
Regards,
Torfinn Ingolfsen

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: uaudio recording problem

2009-11-20T10:37:40Z

On Fri, Nov 20, 2009 at 08:59:04AM +0100, Hans Petter Selasky wrote:
> Hi,
>
> This issue has been fixed in USB P4, but the changes have not been committed
> to FreeBSD yet.
>
> --HPS

Thanks!

In case anyone else runs into this before the fix is MFC'd, I csup'd src-sys from HEAD and copied
everything from sys/dev/usb/* and sys/dev/sound/usb/* into my source tree, rebuild my kernel and
rebooted to resolve.

--

Richard Kolkovich
sarumont@...
PGP Key: 0x9E54EF59 (http://pgp.mit.edu)

attachment0 (203 bytes) Download Attachment

Re: [madwimax] madwimax-0.1.1 patch for FreeBSD 8 (very buggy)

2009-11-20T07:41:12Z

Maxim Giryaev пишет:

> I create similar patch, you can see it here: http://code.google.com/p/madwimax/issues/detail?id=39
> Periodical crashes in libusb triggered by sigchild handler in madwimax.
> I check to way to fix it:
> 1. remove sigchild handler and call wait3() in scan_loop()
> 2. check for NULL result of libusb20_tr_get_priv_sc1() inside lubusb.
>
> Second way fixes crashes but periodically libusb_submit_trasfer() returns error 99.
>
> There are no disconnects from Internet on my router during last week.
>

sighandler_wait_child does not work with any of libusb functions and
structures, so I can't understand how it can crash.. And libusb
protected inside by mutex.

PS: To destroy interface on exit:

-int tap_close(int fd, char *dev) { return close(fd); }
+int tap_close(int fd, char *dev) {
+ int res = close(fd);
+
+#if defined(__FreeBSD__)
+ // We need to destroy tun/tap interface like `ifconfig tunN destroy`
+ struct ifreq ifr;
+
+ memset(&ifr, 0, sizeof(ifr));
+ strncpy(ifr.ifr_name, dev, IFNAMSIZ);
+
+ if ((fd = socket(PF_INET, SOCK_DGRAM, 0)) < 0) {
+ res = fd;
+ perror("socket");
+ } else {
+ if ((res = ioctl(fd, SIOCIFDESTROY, &ifr)) < 0) {
+ perror("ioctl(SIOCIFDESTROY)");
+ }
+ close(fd);
+ }
+#endif
+ return res;
+}

--
Best regards, Alexander Samarin
mailto:sasha at enikasoft.ru
https://www.fsora.ru (waits for FreeBSD 8.0-RELEASE)
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: [keyboard] ukbd stops working after filesystems mount at boot time

2009-11-20T03:24:07Z

On Friday 20 November 2009 10:06:56 Travelling Particle wrote:

> New symptom, as Greg House would say. It appears that keyboard is not as
> dead as it looks. If I do shutdown -h, the keyboard suddenly becomes
> usable: I can hit any key to reboot. However, between the start of the late
> boot stage and the end of halt the system behaves exactly as if somebody
> pressed Enter and stick some gum to it to stay that way.
>
> > I am booting off USB stick because I have to attach root partition on HDD
> >
> > > with GELI. It all works fine, I am able to enter passphrase on the
> >
> > keyboard
> >
> > > (there's only ukbd keyboard in the kernel at this moment, but I had
> > > tried with atkbd as well; I have also experimented with or without
> > > TEKEN with
> >
> > no
> >
> > > difference). After root partition is mounted, system mounts other geli
> > > partitions on the same hard disk. It is right after the filesystems
> > > were mounted that the problem starts. The output on console at that
> > > moment
> >
> > starts
> >
> > > to be interleaved with new lines symbols. After late boot stage
> >
> > completes, I
> >
> > > see login prompt on console, but system acts *as if* I had just pressed
> > > Enter and presents login prompt again and again. The keyboard itself
> >
> > appears
> >
> > > to be dead. If I choose to boot single-mode, behavior is the same -- I
> >
> > see
> >
> > > multiple shell prompts as if I were hitting Enter repeatedly. I had
> > > been trying various configurations in the kernel for over 5 days now,
> > > and
> >
> > still
> >
> > > couldn't make the console work on the system (I can login via network
> > > though).

There was a recent EHCI interrupt patch. I'm not sure if it is committed to 9-
current yet.

--HPS

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: [keyboard] ukbd stops working after filesystems mount at boot time

2009-11-20T01:06:56Z

New symptom, as Greg House would say. It appears that keyboard is not as
dead as it looks. If I do shutdown -h, the keyboard suddenly becomes usable:
I can hit any key to reboot. However, between the start of the late boot
stage and the end of halt the system behaves exactly as if somebody pressed
Enter and stick some gum to it to stay that way.

> I am booting off USB stick because I have to attach root partition on HDD
> > with GELI. It all works fine, I am able to enter passphrase on the
> keyboard
> > (there's only ukbd keyboard in the kernel at this moment, but I had tried
> > with atkbd as well; I have also experimented with or without TEKEN with
> no
> > difference). After root partition is mounted, system mounts other geli
> > partitions on the same hard disk. It is right after the filesystems were
> > mounted that the problem starts. The output on console at that moment
> starts
> > to be interleaved with new lines symbols. After late boot stage
> completes, I
> > see login prompt on console, but system acts *as if* I had just pressed
> > Enter and presents login prompt again and again. The keyboard itself
> appears
> > to be dead. If I choose to boot single-mode, behavior is the same -- I
> see
> > multiple shell prompts as if I were hitting Enter repeatedly. I had been
> > trying various configurations in the kernel for over 5 days now, and
> still
> > couldn't make the console work on the system (I can login via network
> > though).
>

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: [madwimax] madwimax-0.1.1 patch for FreeBSD 8 (very buggy)

2009-11-20T00:11:52Z

I create similar patch, you can see it here:
http://code.google.com/p/madwimax/issues/detail?id=39
Periodical crashes in libusb triggered by sigchild handler in madwimax.
I check to way to fix it:
1. remove sigchild handler and call wait3() in scan_loop()
2. check for NULL result of libusb20_tr_get_priv_sc1() inside lubusb.

Second way fixes crashes but periodically libusb_submit_trasfer()
returns error 99.

There are no disconnects from Internet on my router during last week.

--

Maxim Giryaev

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: uaudio recording problem

2009-11-19T23:59:04Z

On Friday 20 November 2009 06:21:01 Richard Kolkovich wrote:

> I'm trying to get my Logitech Quickcam microphone working. When I try to
> record, I get nothing but the following in dmesg:
>
> pcm5: chn_read(): pcm5:virtual:dsp5.vr0: record interrupt timeout, channel
> dead
>
> Here's dmesg after adding/kldloading:
>
> ugen3.9: <vendor 0x046d> at usbus3
> uaudio0: <vendor 0x046d product 0x0990, class 239/2, rev 2.00/0.08, addr 9>
> on usbus3 uaudio0: No playback!
> uaudio0: Record: 16000 Hz, 1 ch, 16-bit S-LE PCM format
> uaudio0: No midi sequencer
> pcm5: <USB audio> on uaudio0
>
> Running 8.0-RC1 on amd64. This also occurs on my laptop running 8.0-BETA3
> on i386. Any clues?

Hi,

This issue has been fixed in USB P4, but the changes have not been committed
to FreeBSD yet.

--HPS

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: kern/140714: system freeze when disconect my flash usb

2009-11-19T22:56:48Z

Synopsis: system freeze when disconect my flash usb

State-Changed-From-To: open->feedback
State-Changed-By: remko
State-Changed-When: Fri Nov 20 06:56:42 UTC 2009
State-Changed-Why:
Submitter: please provide more information on your system, like
a verbose boot, pciconf -vl and any possible information that
HPS might need to get this going. Your information is -very-
limited.

http://www.freebsd.org/cgi/query-pr.cgi?pr=140714
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: kern/140714: system freeze when disconect my flash usb

2009-11-19T22:56:40Z

Synopsis: system freeze when disconect my flash usb

Responsible-Changed-From-To: freebsd-bugs->freebsd-usb
Responsible-Changed-By: remko
Responsible-Changed-When: Fri Nov 20 06:55:49 UTC 2009
Responsible-Changed-Why:
Reassign to USB.

Submitter: please provide more information on your system, like
a verbose boot, pciconf -vl and any possible information that
HPS might need to get this going. Your information is -very-
limited

http://www.freebsd.org/cgi/query-pr.cgi?pr=140714
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

uaudio recording problem

2009-11-19T21:21:01Z

I'm trying to get my Logitech Quickcam microphone working. When I try to record, I get nothing but
the following in dmesg:

pcm5: chn_read(): pcm5:virtual:dsp5.vr0: record interrupt timeout, channel dead

Here's dmesg after adding/kldloading:

ugen3.9: <vendor 0x046d> at usbus3
uaudio0: <vendor 0x046d product 0x0990, class 239/2, rev 2.00/0.08, addr 9> on usbus3
uaudio0: No playback!
uaudio0: Record: 16000 Hz, 1 ch, 16-bit S-LE PCM format
uaudio0: No midi sequencer
pcm5: <USB audio> on uaudio0

Running 8.0-RC1 on amd64. This also occurs on my laptop running 8.0-BETA3 on i386. Any clues?

Thanks,

--

Richard Kolkovich
sarumont@...
PGP Key: 0x9E54EF59 (http://pgp.mit.edu)

attachment0 (203 bytes) Download Attachment

[keyboard] ukbd stops working after filesystems mount at boot time

2009-11-19T06:22:06Z

Thanks for your interest!

LiveCD is also 8.0-RC3?
>

Yes, and the kernel is freshly built from the very same sources (and no, it
did not work when i booted GENERIC off the USB card + mounted geli
partitions, symptoms were the same).

Vassiliy
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: FreeBSD - support for DisplayLink devices?

2009-11-18T14:08:55Z

On Wed, Nov 18, 2009 at 10:47:19PM +0100, Hans Petter Selasky wrote:

> On Wednesday 18 November 2009 22:44:04 Torfinn Ingolfsen wrote:
> > On Wed, 18 Nov 2009 22:32:23 +0100
> >
> > Torfinn Ingolfsen <torfinn.ingolfsen@...> wrote:
> > > Today I got a UM-70[5] monitor made by Lilliput, this is
> > > what /var/log/messages says when I connectd it to my 7.2-stable
> > > machine:
> >
> > Oh, I forgot to tell the age of this -stable:
> > tingo@kg-v2$ uname -a
> > FreeBSD kg-v2.kg4.no 7.2-STABLE FreeBSD 7.2-STABLE #1: Fri Oct 30
> > 19:46:58 CET 2009 root@...:/usr/obj/usr/src/sys/V2 amd64
>
> Is there are userland driver using libusb for your device?

libdlo mentioned in the original email is a userland driver using
libusb. It should just work.

Note for FreeBSD 7 and below you will need to install the devel/libusb
port.

Andrew
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: FreeBSD - support for DisplayLink devices?

2009-11-18T14:04:31Z

On Wed, 18 Nov 2009 22:47:19 +0100
Hans Petter Selasky <hselasky@...> wrote:

> Is there are userland driver using libusb for your device?

I don't know, really. I haven't finished googling yet. :-)

So far I've got this:
http://libdlo.freedesktop.org/wiki/
http://mulchman.org/blog/?tag=displaylink
--
Rgds,
Torfinn Ingolfsen

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: FreeBSD - support for DisplayLink devices?

2009-11-18T13:46:03Z

On Wednesday 18 November 2009 22:44:04 Torfinn Ingolfsen wrote:

> On Wed, 18 Nov 2009 22:32:23 +0100
>
> Torfinn Ingolfsen <torfinn.ingolfsen@...> wrote:
> > Today I got a UM-70[5] monitor made by Lilliput, this is
> > what /var/log/messages says when I connectd it to my 7.2-stable
> > machine:
>
> Oh, I forgot to tell the age of this -stable:
> tingo@kg-v2$ uname -a
> FreeBSD kg-v2.kg4.no 7.2-STABLE FreeBSD 7.2-STABLE #1: Fri Oct 30
> 19:46:58 CET 2009 root@...:/usr/obj/usr/src/sys/V2 amd64

Is there are userland driver using libusb for your device?

--HPS
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: FreeBSD - support for DisplayLink devices?

2009-11-18T13:44:04Z

On Wed, 18 Nov 2009 22:32:23 +0100
Torfinn Ingolfsen <torfinn.ingolfsen@...> wrote:

> Today I got a UM-70[5] monitor made by Lilliput, this is
> what /var/log/messages says when I connectd it to my 7.2-stable
> machine:

Oh, I forgot to tell the age of this -stable:
tingo@kg-v2$ uname -a
FreeBSD kg-v2.kg4.no 7.2-STABLE FreeBSD 7.2-STABLE #1: Fri Oct 30
19:46:58 CET 2009 root@...:/usr/obj/usr/src/sys/V2 amd64
--
Regards,
Torfinn Ingolfsen

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

FreeBSD - support for DisplayLink devices?

2009-11-18T13:32:23Z

Hi,
Do we have support for DisplayLink devices in FreeBSD?
Like libdlo[2,3] or udl[4]?

Today I got a UM-70[5] monitor made by Lilliput, this is what /var/log/messages
says when I connectd it to my 7.2-stable machine:
Nov 18 22:18:13 kg-v2 root: Unknown USB device: vendor 0x17e9 product 0x02a9 bus uhub1
Nov 18 22:18:13 kg-v2 kernel: ugen2: <DisplayLink LILLIPUT USB Monitor, class 0/0, rev 2.00/1.23, addr 4> on uhub1

Output from 'usbdevs -v':
port 5 addr 4: high speed, power 500 mA, config 1, LILLIPUT USB Monitor(0x02a9), DisplayLink(0x17e9), rev 1.23

(No, I can't stop buying gadgets)

Refernces:
1) http://en.wikipedia.org/wiki/Displaylink
2) http://displaylink.org/
3) http://libdlo.freedesktop.org/
4) http://libdlo.freedesktop.org/wiki/udl
5) http://www.lilliputlcd.com/lilliput-um70-7-usb-monitor-only-one-cable-does-all_p592.html
--
Regards,
Torfinn Ingolfsen

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

RE: 8.0-RC3 USB lock up on mounting two partitions from one USB drive

2009-11-18T12:03:54Z

It looks like a system issue since it also happens to the SATA drive.
The USB drive seems having more difficulty. I will back up rest
partitions,
Then redo the slice and partition to see if problem goes away.
If so, then 8.0-R has a backward compatibility issue on the partition
table or format to older FreeBSD release.

-----Original Message-----
From: Hans Petter Selasky [mailto:hselasky@...]
Sent: Wednesday, November 18, 2009 3:14 AM
To: freebsd-usb@...
Cc: Guojun Jin; freebsd-stable@...; questions@...
Subject: Re: 8.0-RC3 USB lock up on mounting two partitions from one USB
drive

Hi,

I'm not sure if this is an USB issue or not. If you get READ/WRITE
errors and
the drive simply dies then it might be the case. Else it is a system
issue.

There are quirks for mass storage which you can add to
sys/dev/usb/storage/umass.c .

--HPS

On Wednesday 18 November 2009 08:33:07 Guojun Jin wrote:
> Did newfs on those partition and made things worsen -- restore
completely
> fails: (I had experienced another similar problem on an IDE, which
works
> well for 6.4 and 7.2, but 8.0.) This dirve works fine under FreeBSD
6.4.
>
> Is something new in 8.0 making disk partition schema changed?
>
> g_vfs_done():da0s3d[READ(offset=98304, length=16384)]error = 6
> g_vfs_done():da0s3d[WRITE(offset=192806912, length=16384)]error = 6
> fopen: Device not configured
> cannot create save file ./restoresymtable for symbol table
> abort? [yn] (da0:umass-sim0:0:0:0): Synchronize cache failed, status
==

> 0xa, scs i status == 0x0
> (da0:umass-sim0:0:0:0): removing device entry
> ugen1.2: <DMI> at usbus1
> umass0: <DMI Ultra HDD, class 0/0, rev 2.00/1.19, addr 2> on usbus1
> umass0: SCSI over Bulk-Only; quirks = 0x0000
> umass0:0:0:-1: Attached to scbus0
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <DMI Ultra HDD 1.19> Fixed Direct Access SCSI-0 device
> da0: 40.000MB/s transfers
> da0: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
> Device da0s3d went missing before all of the data could be written to

it;

> expect data loss.
>
> 99 23:19 sysinstall
> 100 23:20 newfs /dev/da0s3d
> 101 23:20 newfs /dev/da0s3e
> 102 23:21 mount /dev/da0s3d /mnt
> 103 23:21 cd /mnt
> 104 23:21 dump -0f - /home | restore -rf -
> 105 23:27 history 15
>
>
>
> -----Original Message-----
> From: Guojun Jin
> Sent: Tue 11/17/2009 11:05 PM
> To: freebsd-stable@...
> Cc: questions@...; freebsd-usb@...
> Subject: 8.0-RC3 USB lock up on mounting two partitions from one USB

drive

>
> When mounting two partitions from a USB dirve, it can cause the drive
> access lock up for a long time. Details:
>
> Terminal 1 --
> term1# mount /dev/da0s3d /mnt
> term1# cd /mnt ; rm -fr *
>
> when rm starts, go to terminal 2 and do:
>
> term2# mount /dev/da0s3e /dist ### this will hanging for a long time

and
> USB hard drive activity light is off. After more than 1-2 minutes,
mount
> returns, and the drive activity light is blinking, thus removing is
going
> on.
>
> term2# ls /dist ### this will cause dUSB dirve hanging again -- no
> avtivity. Similarly, ls will finish in a couple of miniutes or longer,
the
> rm command continues; but for a while, the drive activity will stop
again.
>
> Reboot machine, repeat the above steps, and result will be the same.
Reboot
> machine again, and just mount one partition, then doing "rm -rf *"
without
> involve the second partition, rm will finish quickly.
>
> Has anyone obseved this behave on 8.0-RC?
>
> -Jin

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: [keyboard] ukbd stops working after filesystems mount at boot time

2009-11-18T05:49:18Z

on 18/11/2009 14:25 Travelling Particle said the following:

> Hello,
>
> I am not sure if the problem is with USB, because the same hardware works
> fine with LiveCD. I will seek help here first, please feel free to redirect
> me to a better place for advice.
>
> The system is 8.0-RC3.
>
> I am booting off USB stick because I have to attach root partition on HDD
> with GELI. It all works fine, I am able to enter passphrase on the keyboard
> (there's only ukbd keyboard in the kernel at this moment, but I had tried
> with atkbd as well; I have also experimented with or without TEKEN with no
> difference). After root partition is mounted, system mounts other geli
> partitions on the same hard disk. It is right after the filesystems were
> mounted that the problem starts. The output on console at that moment starts
> to be interleaved with new lines symbols. After late boot stage completes, I
> see login prompt on console, but system acts *as if* I had just pressed
> Enter and presents login prompt again and again. The keyboard itself appears
> to be dead. If I choose to boot single-mode, behavior is the same -- I see
> multiple shell prompts as if I were hitting Enter repeatedly. I had been
> trying various configurations in the kernel for over 5 days now, and still
> couldn't make the console work on the system (I can login via network
> though).
>
> The hardware is Nvidea ION-based Acer nettop. It does not come with PS/2
> keyboard connector and I cannot test it with any keyboard but USB. The
> keyboard itself I am using is Acer's standard one, and it works fine with
> LiveCD. I wonder if GELI might mess the things up, but the geli attachment
> process goes well, and all filesystems are attached just fine.

LiveCD is also 8.0-RC3?

--
Andriy Gapon
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

[keyboard] ukbd stops working after filesystems mount at boot time

2009-11-18T04:25:33Z

Hello,

I am not sure if the problem is with USB, because the same hardware works
fine with LiveCD. I will seek help here first, please feel free to redirect
me to a better place for advice.

The system is 8.0-RC3.

I am booting off USB stick because I have to attach root partition on HDD
with GELI. It all works fine, I am able to enter passphrase on the keyboard
(there's only ukbd keyboard in the kernel at this moment, but I had tried
with atkbd as well; I have also experimented with or without TEKEN with no
difference). After root partition is mounted, system mounts other geli
partitions on the same hard disk. It is right after the filesystems were
mounted that the problem starts. The output on console at that moment starts
to be interleaved with new lines symbols. After late boot stage completes, I
see login prompt on console, but system acts *as if* I had just pressed
Enter and presents login prompt again and again. The keyboard itself appears
to be dead. If I choose to boot single-mode, behavior is the same -- I see
multiple shell prompts as if I were hitting Enter repeatedly. I had been
trying various configurations in the kernel for over 5 days now, and still
couldn't make the console work on the system (I can login via network
though).

The hardware is Nvidea ION-based Acer nettop. It does not come with PS/2
keyboard connector and I cannot test it with any keyboard but USB. The
keyboard itself I am using is Acer's standard one, and it works fine with
LiveCD. I wonder if GELI might mess the things up, but the geli attachment
process goes well, and all filesystems are attached just fine.

Thanks a lot for help,
Vassiliy
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: 8.0-RC3 USB lock up on mounting two partitions from one USB drive

2009-11-18T03:13:11Z

Hi,

I'm not sure if this is an USB issue or not. If you get READ/WRITE errors and
the drive simply dies then it might be the case. Else it is a system issue.

There are quirks for mass storage which you can add to
sys/dev/usb/storage/umass.c .

--HPS

On Wednesday 18 November 2009 08:33:07 Guojun Jin wrote:

> Did newfs on those partition and made things worsen -- restore completely
> fails: (I had experienced another similar problem on an IDE, which works
> well for 6.4 and 7.2, but 8.0.) This dirve works fine under FreeBSD 6.4.
>
> Is something new in 8.0 making disk partition schema changed?
>
> g_vfs_done():da0s3d[READ(offset=98304, length=16384)]error = 6
> g_vfs_done():da0s3d[WRITE(offset=192806912, length=16384)]error = 6
> fopen: Device not configured
> cannot create save file ./restoresymtable for symbol table
> abort? [yn] (da0:umass-sim0:0:0:0): Synchronize cache failed, status ==
> 0xa, scs i status == 0x0
> (da0:umass-sim0:0:0:0): removing device entry
> ugen1.2: <DMI> at usbus1
> umass0: <DMI Ultra HDD, class 0/0, rev 2.00/1.19, addr 2> on usbus1
> umass0: SCSI over Bulk-Only; quirks = 0x0000
> umass0:0:0:-1: Attached to scbus0
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <DMI Ultra HDD 1.19> Fixed Direct Access SCSI-0 device
> da0: 40.000MB/s transfers
> da0: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
> Device da0s3d went missing before all of the data could be written to it;
> expect data loss.
>
> 99 23:19 sysinstall
> 100 23:20 newfs /dev/da0s3d
> 101 23:20 newfs /dev/da0s3e
> 102 23:21 mount /dev/da0s3d /mnt
> 103 23:21 cd /mnt
> 104 23:21 dump -0f - /home | restore -rf -
> 105 23:27 history 15
>
>
>
> -----Original Message-----
> From: Guojun Jin
> Sent: Tue 11/17/2009 11:05 PM
> To: freebsd-stable@...
> Cc: questions@...; freebsd-usb@...
> Subject: 8.0-RC3 USB lock up on mounting two partitions from one USB drive
>
> When mounting two partitions from a USB dirve, it can cause the drive
> access lock up for a long time. Details:
>
> Terminal 1 --
> term1# mount /dev/da0s3d /mnt
> term1# cd /mnt ; rm -fr *
>
> when rm starts, go to terminal 2 and do:
>
> term2# mount /dev/da0s3e /dist ### this will hanging for a long time and
> USB hard drive activity light is off. After more than 1-2 minutes, mount
> returns, and the drive activity light is blinking, thus removing is going
> on.
>
> term2# ls /dist ### this will cause dUSB dirve hanging again -- no
> avtivity. Similarly, ls will finish in a couple of miniutes or longer, the
> rm command continues; but for a while, the drive activity will stop again.
>
> Reboot machine, repeat the above steps, and result will be the same. Reboot
> machine again, and just mount one partition, then doing "rm -rf *" without
> involve the second partition, rm will finish quickly.
>
> Has anyone obseved this behave on 8.0-RC?
>
> -Jin

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: usb printer rejects incoming data [SOLVED]

2009-11-18T00:40:26Z

On Tuesday 17 November 2009 18:23:10 Alex Troussov wrote:

> On Tue, Nov 17, 2009 at 09:16:03AM +0100, Hans Petter Selasky wrote:
> > > Recently I upgraded to the latest RELENG_8 and rebuilt world.
> > > Now I'm having strange problems with my USB printer (Samsung CLP 315).
> > > Digging into it these last days, I found that it seems to refuse
> > > incoming data via USB port.
> > >
> > > >sudo cat tiger.qpdl > /dev/usb/4.3.0
> > >
> > > cat: stdout: Input/output error
> > >
> > > I'm sure this file tiger.qpdl contains the data needed, I created it
> > > from /usr/local/share/ghostscript/8.64/examples/tiger.eps using gs +
> > > foo2qpdl and tested on another PC.
> >
> > .0 is the control endpoint. You won't get any data through there :-)
> >
> > See:
> >
> > usbconfig -u 4 -a 3 dump_curr_config_desc
> >
> > for the correct OUT endpoint.
>
> OK, here is what it gives:
> >sudo usbconfig -u 4 -a 3 dump_curr_config_desc
>
> ugen4.3: <CLP-310 Series Samsung Electronics Co., Ltd.> at usbus4, cfg=0
> md=HOST spd=HIGH (480Mbps) pwr=ON
>
> Configuration index 0
>
> bLength = 0x0009
> bDescriptorType = 0x0002
> wTotalLength = 0x0020
> bNumInterfaces = 0x0001
> bConfigurationValue = 0x0001
> iConfiguration = 0x0000 <no string>
> bmAttributes = 0x00c0
> bMaxPower = 0x0001
>
> Interface 0
> bLength = 0x0009
> bDescriptorType = 0x0004
> bInterfaceNumber = 0x0000
> bAlternateSetting = 0x0000
> bNumEndpoints = 0x0002
> bInterfaceClass = 0x0007
> bInterfaceSubClass = 0x0001
> bInterfaceProtocol = 0x0002
> iInterface = 0x0000 <no string>
>
> Endpoint 0
> bLength = 0x0007
> bDescriptorType = 0x0005
> bEndpointAddress = 0x0002
> bmAttributes = 0x0002
> wMaxPacketSize = 0x0200
> bInterval = 0x000a
> bRefresh = 0x0000
> bSynchAddress = 0x0000
>
> Endpoint 1
> bLength = 0x0007
> bDescriptorType = 0x0005
> bEndpointAddress = 0x0081
> bmAttributes = 0x0002
> wMaxPacketSize = 0x0200
> bInterval = 0x000a
> bRefresh = 0x0000
> bSynchAddress = 0x0000
>
> I don't know where to look for the right endpoint here...
>
> But I tried every endpoint - /dev/usb/4.3.0, /dev/usb/4.3.1 and
> /dev/usb/4.3.2 - and the last one worked.
> So, the problem is solved for me.
>
> Just for my curiosity, where can I read more about USB endpoints?

Try google. I don't have any links at hand.

--HPS

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

RE: 8.0-RC3 USB lock up on mounting two partitions from one USB drive

2009-11-17T23:33:07Z

Did newfs on those partition and made things worsen -- restore completely fails:
(I had experienced another similar problem on an IDE, which works well for 6.4 and 7.2, but 8.0.)
This dirve works fine under FreeBSD 6.4.

Is something new in 8.0 making disk partition schema changed?

g_vfs_done():da0s3d[READ(offset=98304, length=16384)]error = 6
g_vfs_done():da0s3d[WRITE(offset=192806912, length=16384)]error = 6
fopen: Device not configured
cannot create save file ./restoresymtable for symbol table
abort? [yn] (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0xa, scs
i status == 0x0
(da0:umass-sim0:0:0:0): removing device entry
ugen1.2: <DMI> at usbus1
umass0: <DMI Ultra HDD, class 0/0, rev 2.00/1.19, addr 2> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x0000
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <DMI Ultra HDD 1.19> Fixed Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
Device da0s3d went missing before all of the data could be written to it; expect
data loss.

99 23:19 sysinstall
100 23:20 newfs /dev/da0s3d
101 23:20 newfs /dev/da0s3e
102 23:21 mount /dev/da0s3d /mnt
103 23:21 cd /mnt
104 23:21 dump -0f - /home | restore -rf -
105 23:27 history 15

-----Original Message-----
From: Guojun Jin
Sent: Tue 11/17/2009 11:05 PM
To: freebsd-stable@...
Cc: questions@...; freebsd-usb@...
Subject: 8.0-RC3 USB lock up on mounting two partitions from one USB drive

When mounting two partitions from a USB dirve, it can cause the drive access lock up for a long time.
Details:

Terminal 1 --
term1# mount /dev/da0s3d /mnt
term1# cd /mnt ; rm -fr *

when rm starts, go to terminal 2 and do:

term2# mount /dev/da0s3e /dist ### this will hanging for a long time and USB hard drive activity light is off.
After more than 1-2 minutes, mount returns, and the drive activity light is blinking, thus removing is going on.

term2# ls /dist ### this will cause dUSB dirve hanging again -- no avtivity.
Similarly, ls will finish in a couple of miniutes or longer, the rm command continues; but for a while, the drive
activity will stop again.

Reboot machine, repeat the above steps, and result will be the same. Reboot machine again, and just mount one
partition, then doing "rm -rf *" without involve the second partition, rm will finish quickly.

Has anyone obseved this behave on 8.0-RC?

-Jin

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

8.0-RC3 USB lock up on mounting two partitions from one USB drive

2009-11-17T23:05:13Z

When mounting two partitions from a USB dirve, it can cause the drive access lock up for a long time.
Details:

Terminal 1 --
term1# mount /dev/da0s3d /mnt
term1# cd /mnt ; rm -fr *

when rm starts, go to terminal 2 and do:

term2# mount /dev/da0s3e /dist ### this will hanging for a long time and USB hard drive activity light is off.
After more than 1-2 minutes, mount returns, and the drive activity light is blinking, thus removing is going on.

term2# ls /dist ### this will cause dUSB dirve hanging again -- no avtivity.
Similarly, ls will finish in a couple of miniutes or longer, the rm command continues; but for a while, the drive
activity will stop again.

Reboot machine, repeat the above steps, and result will be the same. Reboot machine again, and just mount one
partition, then doing "rm -rf *" without involve the second partition, rm will finish quickly.

Has anyone obseved this behave on 8.0-RC?

-Jin

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: usb printer rejects incoming data [SOLVED]

2009-11-17T09:23:10Z

On Tue, Nov 17, 2009 at 09:16:03AM +0100, Hans Petter Selasky wrote:

> > Recently I upgraded to the latest RELENG_8 and rebuilt world.
> > Now I'm having strange problems with my USB printer (Samsung CLP 315).
> > Digging into it these last days, I found that it seems to refuse
> > incoming data via USB port.
> >
> > >sudo cat tiger.qpdl > /dev/usb/4.3.0
> >
> > cat: stdout: Input/output error
> >
> > I'm sure this file tiger.qpdl contains the data needed, I created it
> > from /usr/local/share/ghostscript/8.64/examples/tiger.eps using gs +
> > foo2qpdl and tested on another PC.
>
> .0 is the control endpoint. You won't get any data through there :-)
>
> See:
>
> usbconfig -u 4 -a 3 dump_curr_config_desc
>
> for the correct OUT endpoint.

OK, here is what it gives:

>sudo usbconfig -u 4 -a 3 dump_curr_config_desc
ugen4.3: <CLP-310 Series Samsung Electronics Co., Ltd.> at usbus4, cfg=0
md=HOST spd=HIGH (480Mbps) pwr=ON

Configuration index 0

bLength = 0x0009
bDescriptorType = 0x0002
wTotalLength = 0x0020
bNumInterfaces = 0x0001
bConfigurationValue = 0x0001
iConfiguration = 0x0000 <no string>
bmAttributes = 0x00c0
bMaxPower = 0x0001

Interface 0
bLength = 0x0009
bDescriptorType = 0x0004
bInterfaceNumber = 0x0000
bAlternateSetting = 0x0000
bNumEndpoints = 0x0002
bInterfaceClass = 0x0007
bInterfaceSubClass = 0x0001
bInterfaceProtocol = 0x0002
iInterface = 0x0000 <no string>

Endpoint 0
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0002
bmAttributes = 0x0002
wMaxPacketSize = 0x0200
bInterval = 0x000a
bRefresh = 0x0000
bSynchAddress = 0x0000

Endpoint 1
bLength = 0x0007
bDescriptorType = 0x0005
bEndpointAddress = 0x0081
bmAttributes = 0x0002
wMaxPacketSize = 0x0200
bInterval = 0x000a
bRefresh = 0x0000
bSynchAddress = 0x0000

I don't know where to look for the right endpoint here...

But I tried every endpoint - /dev/usb/4.3.0, /dev/usb/4.3.1 and
/dev/usb/4.3.2 - and the last one worked.
So, the problem is solved for me.

Just for my curiosity, where can I read more about USB endpoints?

WBR, Alex
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: usb printer rejects incoming data

2009-11-17T00:14:51Z

On Tuesday 17 November 2009 00:07:41 Alex Troussov wrote:

> Hello all,
>
> Recently I upgraded to the latest RELENG_8 and rebuilt world.
> Now I'm having strange problems with my USB printer (Samsung CLP 315).
> Digging into it these last days, I found that it seems to refuse
> incoming data via USB port.
> I'm using foo2qpdl filter and it generates a standard QPDL stream for that
> printer, the problem occurs when I try to feed that data to the printer.
>
> Here is some details about my environment:
> >uname -a
>
> FreeBSD xxxx.yyyy.net 8.0-PRERELEASE FreeBSD 8.0-PRERELEASE #26: Sun
> Nov 15 15:44:11 CET 2009 root@...:/usr/obj/usr/src/sys/ERLEY
> i386
>
> >sudo usbconfig
>
> ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps)
> pwr=ON ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL
> (12Mbps) pwr=ON ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST
> spd=FULL (12Mbps) pwr=ON ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0
> md=HOST spd=FULL (12Mbps) pwr=ON ugen4.1: <EHCI root HUB Intel> at usbus4,
> cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen4.2: <802.11 bg WLAN Ralink> at
> usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen0.2: <CanoScan Canon>
> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen4.3: <CLP-310 Series
> Samsung Electronics Co., Ltd.> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps)
> pwr=ON ugen1.2: <Protection Station EATON> at usbus1, cfg=0 md=HOST spd=LOW
> (1.5Mbps) pwr=ON
>
> >sudo ls -l /dev/u* | grep 4.3
>
> lrw-rw-rw- 1 daemon daemon 9 16 ноя 14:07 /dev/ugen4.3@ ->
> usb/4.3.0 crw-rw-rw- 1 daemon daemon 0, 140 16 ноя 14:07 4.3.0
> crw-rw-rw- 1 daemon daemon 0, 142 16 ноя 14:07 4.3.1
> crw-rw-rw- 1 daemon daemon 0, 143 16 ноя 14:07 4.3.2
>
> >sudo cat tiger.qpdl > /dev/usb/4.3.0
>
> cat: stdout: Input/output error
>
> I'm sure this file tiger.qpdl contains the data needed, I created it
> from /usr/local/share/ghostscript/8.64/examples/tiger.eps using gs +
> foo2qpdl and tested on another PC.

Hi,

.0 is the control endpoint. You won't get any data through there :-)

See:

usbconfig -u 4 -a 3 dump_curr_config_desc

for the correct OUT endpoint.

--HPS
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

some quirk issue around uhid operations

2009-11-16T17:50:25Z

Hi USB developers :)

Our company's developer Ozawa-san has found some quirk issue
around uhid device operations.

For example, using uhid0 from processA and using uhid1 from
processB at the same time, sometimes read(2) operation leads
handup. In case useing those not at same time, there is no
hangup. In this week he has been doing test and above issue
happens all the time.

At last he didn't find does which read(2) or write(2)
operations have a bug. If you have some ideas or can resolve
this issue, please help us!

--
Daichi GOTO
CEO | ONGS Inc.
81-42-316-7945 | daichi@... | http://www.ongs.co.jp
LinkedIn: http://linkedin.com/in/daichigoto
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: kern/140614: [uplcom] [patch] adding support for Radio Shack Gigware USB to Serial cable (26-949) to uplcom

2009-11-16T15:19:50Z

Old Synopsis: adding support for Radio Shack Gigware USB to Serial cable (26-949) to uplcom
New Synopsis: [uplcom] [patch] adding support for Radio Shack Gigware USB to Serial cable (26-949) to uplcom

Responsible-Changed-From-To: freebsd-bugs->freebsd-usb
Responsible-Changed-By: linimon
Responsible-Changed-When: Mon Nov 16 23:19:21 UTC 2009
Responsible-Changed-Why:
Over to maintainer(s).

http://www.freebsd.org/cgi/query-pr.cgi?pr=140614
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

usb printer rejects incoming data

2009-11-16T15:07:41Z

Hello all,

Recently I upgraded to the latest RELENG_8 and rebuilt world.
Now I'm having strange problems with my USB printer (Samsung CLP 315).
Digging into it these last days, I found that it seems to refuse
incoming data via USB port.
I'm using foo2qpdl filter and it generates a standard QPDL stream for that
printer, the problem occurs when I try to feed that data to the printer.
Here is some details about my environment:

>uname -a
FreeBSD xxxx.yyyy.net 8.0-PRERELEASE FreeBSD 8.0-PRERELEASE #26: Sun
Nov 15 15:44:11 CET 2009 root@...:/usr/obj/usr/src/sys/ERLEY i386

>sudo usbconfig
ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen4.1: <EHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
ugen4.2: <802.11 bg WLAN Ralink> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
ugen0.2: <CanoScan Canon> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
ugen4.3: <CLP-310 Series Samsung Electronics Co., Ltd.> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
ugen1.2: <Protection Station EATON> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON

>sudo ls -l /dev/u* | grep 4.3
lrw-rw-rw- 1 daemon daemon 9 16 ноя 14:07 /dev/ugen4.3@ -> usb/4.3.0
crw-rw-rw- 1 daemon daemon 0, 140 16 ноя 14:07 4.3.0
crw-rw-rw- 1 daemon daemon 0, 142 16 ноя 14:07 4.3.1
crw-rw-rw- 1 daemon daemon 0, 143 16 ноя 14:07 4.3.2

>sudo cat tiger.qpdl > /dev/usb/4.3.0
cat: stdout: Input/output error

I'm sure this file tiger.qpdl contains the data needed, I created it
from /usr/local/share/ghostscript/8.64/examples/tiger.eps using gs + foo2qpdl
and tested on another PC.

Any ideas?

WBR, Alex

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Re: usb/127549: [umass] [usb67] [patch] Meizu MiniPlayer M6 (SL) requires some quirks

2009-11-16T14:56:09Z

Old Synopsis: [umass] [patch] Meizu MiniPlayer M6 (SL) requires some quirks
New Synopsis: [umass] [usb67] [patch] Meizu MiniPlayer M6 (SL) requires some quirks

State-Changed-From-To: suspended->patched
State-Changed-By: gavin
State-Changed-When: Mon Nov 16 22:53:28 UTC 2009
State-Changed-Why:
This is fixed in 8 and 7, but not merged to 6. Mark patched in
case somebody wants to do that.

http://www.freebsd.org/cgi/query-pr.cgi?pr=127549
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Current problem reports assigned to freebsd-usb@FreeBSD.org

2009-11-16T03:07:03Z

Note: to view an individual PR, use:
http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.

S Tracker Resp. Description
--------------------------------------------------------------------------------
o usb/140590 usb [bluetooth] [usb] ng_ubt(4) ng_l2cap_process_cmd_rej w
o usb/140477 usb [umass] [patch] allow boot-time attachment of daX devi
o usb/140325 usb Missing/incorrect initialisation and memory leak in li
o usb/140259 usb libusb-1.0 portability/compatibility nits
o usb/140242 usb dev/usb/controller/ehci_ix4xx.c shortcomings
o usb/140236 usb [msdosfs] Labels wiped on external Journaled USB HDD o
o usb/140160 usb USB ports are no longer "active" after ACPI suspend/re
o usb/139990 usb [panic] Kernel frequently panics after printing
o usb/139598 usb [umass] CAM reports "xptioctl: put "device pass" in yo
o usb/139243 usb [uhci] unplug prolific USB serial -> uhci_abort_xfer:
o usb/139142 usb [regression] ehci drivers (NVIDIA nForce4 USB 2.0 cont
o usb/138915 usb [patch][usb8][usb67] add support for SheevaPlug serial
o usb/138904 usb [rum] unpluging USB wifi card panics system
f usb/138882 usb [ohci] [panic] Can't install FreeBSD 7.2 due to ohci p
o usb/138879 usb [uftdi] [patch] Patch to add support for CTI USB-Mini
o usb/138798 usb 8.0-BETA4 can't boot from USB flash drive [regression]
o usb/138675 usb [usb8] [panic] page fault, perhaps in USB
o usb/138659 usb [usb8][uftdi] driver broken in RELENG_8/CURRENT
o usb/138389 usb [usb8] [patch] NULL pointer dereference in usb_endpoin
o usb/138175 usb [usb67] [boot] System cannot boot, when USB reader wit
o usb/138172 usb Additional dev id for u3g (Option mini PCIe)
o usb/138138 usb Novatel U760 for u3g (Verizon and Bell Canada)
o usb/138124 usb [usb8] Axed uaudio functionality in the usbng (alterna
o usb/138119 usb MultiBay CDROM (propably on USB bus) is not recognized
o usb/137872 usb slow booting on usb flash drive
f usb/137848 usb Page fault when using an USB bluetooth adapter
o usb/137806 usb [ukbd] USB keyboard doesn't work until it's unplugged
o usb/137763 usb [usb67][ukbd] Logitech wireless keyboard media keys no
o usb/137616 usb [usb67][usb8][usbdevs] [patch]: usbdevs update: Please
o usb/137377 usb [usb8] Support for Huawei E180
o usb/137341 usb [usb8][rum] driver if_rum doesn't work at all and thro
p usb/137226 usb [usb67][patch] quirk for Philips extern USB disk
o usb/137190 usb [usb8][patch] inhibit spurious button releases for som
o usb/137189 usb [usb8][patch] create and use sysctl nodes for HID repo
p usb/137188 usb [usb8][patch] correctly handle USB report descriptors
o usb/137129 usb SteelSeries Ikari USB laser mouse not attaching
p usb/136761 usb [usbdevs][usb67][patch] Teach usbdevs / u3g(4) about H
o usb/135938 usb [aue] aue driver only passes traffic in promisc mode
f usb/135857 usb RTL8187 Wireless Adapter
o usb/135575 usb [usbdevs] [patch] Add HTC Wizard phone vid/pid informa
o usb/135542 usb [keyboard] boot loader does not work with a usb keyboa
p usb/135372 usb [usb67][umass] Quirk report for Teclast TL-C300 usb me
o usb/135348 usb [umass] USB Drive Hangs with ZFS (JMicron USB2/eSata)
o usb/135206 usb machine reboots when inserted USB device
o usb/135200 usb SAMSUNG i740 usb mass: Synchronize cache failed, statu
o usb/135182 usb UMASS quirk - Olympus FE20 camera
o usb/134950 usb Lowering DTR for USB-modem via ubsa is not possible
o usb/134633 usb Add support for WILLCOM03(SHARP smart phone)
o usb/134631 usb [usbdevs] [patch] WiSPY DBx support requires usb tweak
o usb/134299 usb Kernel Panic plugging in MF626 USB UMTS Stick u3g
o usb/134193 usb System freeze on usb MP3 player insertion
o usb/134117 usb [Patch] Add support for 'Option GlobeTrotter HSDPA Mod
o usb/134085 usb [umass] Adding usb quirk for Sony USB flash drive
o usb/133989 usb [newusb] [ukbd] USB keyboard dead at mountroot> prompt
o usb/133712 usb [ural] [patch] RE: Fixed an issue with ural(4) that wa
o usb/133390 usb umass crashes system in 7.1 when Olympus D-540 attache
o usb/133296 usb [rum] driver not working properly in hostap mode
p usb/132799 usb [usb][patch]GENESYS USB2IDE requires NO_SYNCHRONIZE_CA
o usb/132785 usb [usb] [patch] Gemtech remote powersocket is classed as
o usb/132594 usb USB subsystem causes page fault and crashes
o usb/132312 usb Xorg 7.4 halts USB controller
o usb/132080 usb [patch] [usb] [rum] Kernel panic after NOMEM caused by
o usb/132066 usb [ukbd] Keyboard failure USB keyboard DELL 760
o usb/132036 usb [panic] page fault when connecting Olympus C740 camera
o usb/131912 usb [uslcom] [patch] New devices using Silicon Labs chips
o usb/131900 usb [usbdevs] [patch] Additional product identification co
o usb/131583 usb [umass] Failure when detaching umass Device
o usb/131576 usb [aue] ADMtek USB To LAN Converter can't send data
o usb/131521 usb Registering Belkin UPS to usb_quirks.c
o usb/131123 usb [patch] re-add UQ_ASSUME_CM_OVER_DATA USB quirk
o usb/131074 usb no run-time detection of usb devices plugged into exte
o usb/130736 usb Page fault unplugging USB stick
o usb/130230 usb Samsung Electronics YP-U3 does not attach in 7.1-RELEA
o usb/130208 usb Boot process severely hampered by umass0 error
o usb/130122 usb [newusb] DVD drive detects as 'da' device
o usb/129945 usb [usbdevs] [patch] add u3g support for Longcheer WM66 U
o usb/129766 usb [usb] plugging in usb modem HUAWEI E226 panics system
o usb/129758 usb [uftdi] [patch] add Pyramid LCD usb support
o usb/129673 usb [uhci] uhci (uhub) confused on replugging USB 1.1 scan
o usb/129522 usb [ubsa] [patch] add support for ZTE AC8700 modem
o usb/129500 usb [umass] [panic] FreeBSD Crashes when connecting SanDis
o usb/129311 usb [usb] [panic] Instant crash with an USB card reader
o usb/129251 usb [usbdevs] [patch] Liebert UPS being assigned uhid and
o usb/129173 usb [uplcom] [patch] Add support for Corega CG-USBRS232R a
s usb/128990 usb [usb] u3g does not handle RTS/CTS available on for exa
o usb/128977 usb [usb] [patch] uaudio is not full duplex
o usb/128803 usb [usbdevs] [patch] Quirk for I-Tuner Networks USBLCD4X2
o usb/128485 usb [umodem] [patch] Nokia N80 modem support
o usb/128425 usb [umass] Cannot Connect Maxtor Onetouch 4 USB drive
o usb/128418 usb [panic] [rum] loading if_rum causes panic, looks like
o usb/128324 usb [uplcom] [patch] remove baud rate restriction for PL23
o usb/127980 usb [umass] [patch] Fix Samsung YP U2 MP3 player on 7.x an
o usb/127926 usb [boot] USB Timeout during bootup
s usb/127549 usb [umass] [patch] Meizu MiniPlayer M6 (SL) requires some
s usb/127453 usb [request] ubsa, uark, ubser, uftdi, and friends should
o usb/127423 usb [boot] BTX halted on Gigabyte GA-MA69VM-S2 / AMD Sempr
o usb/127342 usb [boot] [panic] enabling usb keyboard and mouse support
o usb/127248 usb [ucom] panic while uplcom devices attaach and detach
o usb/127222 usb [ohci] Regression in 7.0 usb storage generic driver
o usb/126884 usb [ugen] [patch] Bug in buffer handling in ugen.c
o usb/126848 usb [usb]: USB Keyboard hangs during Installation
o usb/126740 usb [ulpt] doesn't work on 7.0-RELEASE, 10 second stall be
o usb/126519 usb [usb] [panic] panic when plugging in an iphone
o kern/126396 usb [panic] kernel panic after unplug USB Bluetooth device
o usb/125736 usb [ukbd] [hang] system hangs after AT keyboard detect if
o usb/125631 usb [ums] [panic] kernel panic during bootup while 'Logite
o usb/125510 usb [panic] repeated plug and unplug of USB mass storage d
o usb/125450 usb [panic] Removing USB flash card while being accessed c
o usb/125238 usb [ums] Habu Mouse turns off in X
o usb/125088 usb [keyboard] Touchpad not detected on Adesso AKB-430UG U
o usb/124980 usb [panic] kernel panic on detaching unmounted umass devi
o kern/124777 usb [ucom] USB cua devices don't revert to tty devices whe
o usb/124758 usb [rum] [panic] rum panics SMP kernel
o usb/124708 usb [panic] Kernel panic on USB KVM reattach
o usb/124604 usb [ums] Microsoft combo wireless mouse doesn't work
o kern/124130 usb [usb] gmirror fails to start usb devices that were pre
o usb/123969 usb [usb] Supermicro H8SMi-2 usb problem: port reset faile
o usb/123714 usb [usb] [panic] Panic when hald-storage-probe runs with
o usb/123691 usb usbd(8): usbd hangs
o usb/123690 usb [usb] [panic] Panic on USB device insertion when usb l
o usb/123611 usb [usb] BBB reset failed, STALLED from Imation/Mitsumi U
o usb/123509 usb [umass] continuous reset Samsung SGH-G600 phone
o usb/123352 usb [usbdevs] [patch] Add Option GTMAX3.6/7.2 and Quallcom
o usb/123351 usb [usbdevs] [patch] Add Reiner SCT cyberJack, Omnikey [2
o usb/122992 usb [umass] [patch] MotoROKR Z6 Phone not recognised by um
o usb/122956 usb [ubsa] [patch] add support for Novatel Wireless XU870
o usb/122936 usb [ucom] [ubsa] Device does not receive interrupt
o usb/122905 usb [ubsa] [patch] add Huawei E220 to ubsa
o usb/122819 usb [usb] [patch] Patch to provide dynamic additions to th
o usb/122813 usb [udbp] [request] udbp driver should be removed in favo
o usb/122621 usb [new driver] [patch] New driver for Sierra Wireless 3G
o usb/122547 usb [ehci] USB Printer not being recognized after reboot
o usb/122539 usb [ohci] [panic] AnyDATA ADU-E1000D - kernel panic: ohci
o usb/122483 usb [panic] [ulpt] Repeatable panic in 7.0-STABLE
o usb/122119 usb [umass] umass device causes creation of daX but not da
o usb/122025 usb [uscanner] [patch] uscanner does not attach to Epson R
o usb/121755 usb [ohci] [patch] Fix panic after ohci/uhub cardbus devic
o usb/121734 usb [ugen] ugen HP1022 printer device not working since up
o usb/121708 usb [keyboard] nforce 650i mobo w/ usb keyboard infinite k
o usb/121474 usb [cam] [patch] QUIRK: SAMSUNG HM250JI in LaCie usb hard
o usb/121426 usb [patch] [uscanner] add HP ScanJet 3570C
o usb/121275 usb [boot] [panic] FreeBSD fails to boot with usb legacy s
o usb/121232 usb [usb] [panic] USB CardBus card removal causes reboot s
p usb/121184 usb [uipaq] [patch] add ids from linux ipaq driver (plus a
o usb/121169 usb [umass] Issues with usb mp3 player
o usb/121045 usb [uftdi] [patch] Add support for PC-OP-RS1 and KURO-RS
o usb/120786 usb [usb] [panic] Kernel panic when forced umount of a det
o usb/120729 usb [panic] fault while in kernel mode with connecting USB
o usb/120572 usb [umass] [patch] quirk to support ASUS P535 as umass (a
o usb/120321 usb [hang] System hangs when transferring data to WD MyBoo
o usb/120283 usb [panic] Automation reboot with wireless keyboard & mou
o usb/120034 usb [hang] 6.2 & 6.3 hangs on boot at usb0: OHCI with 1.5
o usb/119981 usb [axe] [patch] add support for LOGITEC LAN-GTJ/U2 gigab
o usb/119977 usb [ums] Mouse does not work in a Cherry-USB keyboard/mou
o usb/119653 usb [cam] [patch] iriver s7 player sync cache error patch
o usb/119633 usb [umass] umass0: BBB reset failed, IOERROR [regression]
o usb/119513 usb [irq] inserting dlink dwl-g630 wireless card results i
o usb/119509 usb [usb] USB flaky on Dell Optiplex 755
o usb/119481 usb [hang] FreeBSD not responding after connecting USB-Mas
o usb/119389 usb [umass] Sony DSC-W1 CBI reset failed, STALLED [regress
o usb/119227 usb [ubsa] [patch] ubsa buffer is too small; should be tun
o usb/119201 usb [cam] [patch] Quirks for Olympus FE-210 camera, LG and
o usb/118485 usb [usbdevs] [patch] Logitech Headset Workaround
o usb/118480 usb [umass] Timeout in USB mass storage freezes vfs layer
o usb/118353 usb [panic] [ppp] repeatable kernel panic during ppp(4) se
o usb/118141 usb [ucom] usb serial and nokia phones ucomreadcb ucomread
o usb/118140 usb [ucom] [patch] quick hack for ucom to get it behave wi
o usb/118098 usb [umass] 6th gen iPod causes problems when disconnectin
o usb/117955 usb [umass] [panic] inserting minolta dimage a2 crashes OS
o usb/117946 usb [panic] D-Link DUB-E100 rev. B1 crashes FreeBSD 7.0-BE
o usb/117938 usb [ums] [patch] Adding support for MS WL Natural and MS
o usb/117911 usb [ums] [request] Mouse Gembird MUSWC not work
o usb/117893 usb [umass] Lacie USB DVD writing failing
o usb/117613 usb [uhci] [irq] uhci interrupt storm & USB leaked memory
o usb/117598 usb [uaudio] [patch] Not possible to record with Plantroni
o usb/117313 usb [umass] [panic] panic on usb camera insertion
o usb/117200 usb [ugen] ugen0 prints strange string on attach if detach
o usb/117183 usb [panic] USB/fusefs -- panic while transferring large a
o usb/116947 usb [ukbd] [patch] [regression] enable boot protocol on th
o usb/116699 usb [usbhid] USB HID devices do not initialize at system b
o usb/116561 usb [umodem] [panic] RELENG_6 umodem panic "trying to slee
o usb/116282 usb [ulpt] Cannot print on USB HP LJ1018 or LJ1300
o usb/115935 usb [usbdevs] [patch] kernel counterproductively attaches
o usb/115933 usb [uftdi] [patch] RATOC REX-USB60F (usb serial converter
o usb/115400 usb [ehci] Problem with EHCI on ASUS M2N4-SLI
o usb/115298 usb [ulpt] [panic] Turning off USB printer panics kernel
o usb/114916 usb [umass] [patch] USB Maxtor drive (L300RO) requires qui
o kern/114780 usb [uplcom] [panic] Panics while stress testing the uplco
o usb/114682 usb [umass] generic USB media-card reader unusable
o usb/114310 usb [libusb] [patch] [panic] USB hub attachment panics ker
o usb/114068 usb [usb67] [usb8] [umass] [patch] Problem with connection
o conf/114013 usb [patch] WITHOUT_USB allow to compil a lot of USB stuff
o usb/113060 usb [usb67] [ulpt] [patch] Samsung printer not working in
o usb/110856 usb [usb67] [ugen] [patch] interrupt in msgs are truncated
s usb/108344 usb [usb67] [atausb] [panic] kernel with atausb panics whe
o usb/107827 usb [usb67] [ohci] [panic] ohci_add_done addr not found
o usb/107388 usb [usb67] [usb8] [new driver] [patch] add utoppy device
o usb/107243 usb [usb67] [cam] [quirk] [patch] Apacer USB Flash Drive q
o usb/106041 usb [usb67] [usb8] [request] FreeBSD does not recognise Mu
o usb/105361 usb [usb67] [panic] Kernel panic during unmounting mass st
s usb/103917 usb [usb67] [uhub] USB driver reports "Addr 0 should never
o usb/103418 usb [usb67] [usb8] [patch] [request] usbhidctl(8) add abil
o usb/103046 usb [usb67] [ulpt] [patch] ulpt event driven I/O with sele
o usb/101775 usb [usb67] [usb8] [libusbhid] [patch] possible error in r
o usb/101761 usb [usb67] [patch] [request] usb.h: increase maximal size
o usb/100746 usb [usb67] [ukbd] system does not boot due to USB keyboar
o usb/99538 usb [keyboard] while using USB keyboard default params of
o usb/99431 usb [keyboard] FreeBSD on MSI 6566E (Intel 845E motherboar
o kern/99200 usb [bluetooth] SMP-Kernel crashes reliably when Bluetooth
o usb/98343 usb [boot] BBB reset failed errors with Creative Muvo MP3
o usb/97472 usb [cam] [patch] add support for Olympus C150,D390
s usb/97286 usb [mouse] [request] MS Wireless Intellimouse Explorer 2.
o usb/97175 usb [umass] [hang] USB cardreader hangs system
o usb/96457 usb [umass] [panic] fatback on umass = reboot
o usb/96381 usb [cam] [patch] add a quirk table entry for a flash ram
o usb/96224 usb [usb] [msdosfs] mount_msdosfs cause page fault in sync
s usb/96120 usb [ums] [request] USB mouse not always detected
s usb/95636 usb [umass] [boot] 5 minute delay at boot when using VT620
o usb/95562 usb [umass] Write Stress in USB Mass drive causes "vinvalb
s usb/95348 usb [keyboard] USB keyboard unplug causes noise on screen
o usb/95037 usb [umass] USB disk not recognized on hot-plug.
o usb/94897 usb [panic] Kernel Panic when cleanly unmounting USB disk
o usb/94717 usb [ulpt] Reading from /dev/ulpt can break work of a UHCI
o usb/94384 usb [panic] kernel panic with usb2 hardware
o usb/93872 usb [cam] [patch] SCSI quirk required for ELTA 8061 OL USB
o usb/93828 usb [ohci] [panic] ohci causes panic on boot (HP Pavillion
o usb/93389 usb [umass] [patch] Digital Camera Pentax S60 don't work
o usb/93155 usb [ulpt] /dev/ulpt0: device busy, USB printer does not w
o usb/92852 usb [ums] [patch] Vertical scroll not working properly on
o usb/92171 usb [panic] panic unplugging Vodafone Mobile Connect (UMTS
o usb/92142 usb [uhub] SET_ADDR_FAILED and SHORT_XFER errors from usb
o usb/92083 usb [ural] [panic] panic using WPA on ural NIC in 6.0-RELE
o usb/92052 usb [ulpt] usbd causes defunct process with busy file-hand
o usb/91906 usb [ehci] [hang] FreeBSD hangs while booting with USB leg
o usb/91896 usb camcontrol(8): Serial Number of USB Memory Sticks is n
o usb/91811 usb [umass] Compact Flash in HP Photosmart 2610 return "
o usb/91629 usb [usb] usbd_abort_pipe() may result in infinite loop
o usb/91546 usb [umodem] [patch] Nokia 6630 mobile phone does not work
o usb/91538 usb [ulpt] [patch] Unable to print to EPSON CX3500
o usb/91283 usb [boot] [regression] booting very slow with usb devices
o usb/91238 usb [umass] USB tape unit fails to write a second tape fil
o usb/90700 usb [umass] [panic] Kernel panic on connect/mount/use umas
o usb/89954 usb [umass] [panic] USB Disk driver race condition?
s usb/89003 usb [request] LaCie Firewire drive not properly supported
o usb/88743 usb [hang] [regression] USB makes kernel hang at boot (reg
o usb/88408 usb [axe] axe0 read PHY failed
o usb/87648 usb [mouse] Logitech USB-optical mouse problem.
o usb/87224 usb [usb] Cannot mount USB Zip750
o usb/86767 usb [umass] [patch] bogus "slice starts beyond end of the
o usb/86298 usb [mouse] Known good USB mouse won't work with correct s
s usb/85067 usb [uscanner] Cannot attach ScanJet 4300C to usb device
f usb/84750 usb [hang] 6-BETA2 reboot/shutdown with root_fs on externa
s usb/84336 usb [usb] [reboot] instant system reboot when unmounting a
o usb/83977 usb [ucom] [panic] ucom1: open bulk out error (addr 2): IN
o usb/83863 usb [ugen] Communication problem between opensc/openct via
o usb/83756 usb [ums] [patch] Microsoft Intellimouse Explorer 4.0A doe
o usb/83563 usb [umass] [panic] Page Fault while detaching Mpman Usb d
o usb/83504 usb [kernel] [patch] SpeedTouch USB stop working on recent
o usb/82660 usb [ehci] [panic] EHCI: I/O stuck in state 'physrd'/panic
s usb/82569 usb [umass] [panic] USB mass storage plug/unplug causes sy
o usb/82520 usb [udbp] [reboot] Reboot when USL101 connected
o usb/82350 usb [ucom] [panic] null pointer dereference in USB stack
o usb/81621 usb [ehci] [hang] external hd hangs under load on ehci
o usb/80935 usb [uvisor] [patch] uvisor.c is not work with CLIE TH55.
o usb/80862 usb [patch] USB locking issues: missing some Giant calls
o usb/80854 usb [patch] [request] suggestion for new iface-no-probe me
o usb/80829 usb [modules] [panic] possible panic when loading USB-modu
s usb/80777 usb [request] usb_rem_task() should wait for callback to c
s usb/80776 usb [udav] [request] UDAV device driver shouldn't use usb_
o usb/80774 usb [patch] have "usbd_find_desc" in line with the other "
o usb/80361 usb [umass] [patch] mounting of Dell usb-stick fails
o usb/80040 usb [sound] [hang] Use of sound mixer causes system freeze
o usb/79723 usb [usb] [request] prepare for high speed isochronous tra
o usb/79722 usb [ehci] wrong alignments in ehci.h
a usb/79656 usb [ehci] RHSC interrupts lost
o usb/79524 usb [ulpt] printing to Minolta PagePro 1[23]xxW via USB fa
o usb/79287 usb [uhci] [hang] UHCI hang after interrupt transfer
o usb/79269 usb [ohci] USB ohci da0 plug/unplug causes crashes and loc
o usb/78984 usb [umass] [patch] Creative MUVO umass failure
o usb/77294 usb [ucom] [panic] ucom + ulpcom panic
o usb/77184 usb [umass] [panic] kernel panic on USB device disconnect,
o usb/76732 usb [ums] Mouse problems with USB KVM Switch
o usb/76653 usb [umass] [patch] Problem with Asahi Optical usb device
o usb/76461 usb [umass] disklabel of umass(4)-CAM(4)-da(4) not used by
o usb/76395 usb [uhci] USB printer does not work, usbdevs says "addr 0
s usb/75928 usb [umass] [request] Cytronix SmartMedia card (SMC) reade
o usb/75800 usb [ucom] ucom1: init failed STALLED error in time of syn
o usb/75797 usb [sound] [regression] 5.3-STABLE(2005 1/4) detect USB h
o usb/75764 usb [umass] [patch] "umass0: Phase Error" - no device for
o usb/75705 usb [umass] [panic] da0 attach / Optio S4 (with backtrace)
o usb/74771 usb [umass] [hang] mounting write-protected umass device a
s usb/74453 usb [umass] [patch] Q-lity CD-RW USB ECW-043 (ScanLogic SL
o usb/74211 usb [umass] USB flash drive causes CAM status 0x4 on 4.10R
o usb/73307 usb [panic] Kernel panics on USB disconnect
s usb/72733 usb [ucom] [request] Kyocera 7135 Palm OS connection probl
o usb/71455 usb [umass] Slow USB umass performance of 5.3
o usb/71417 usb [ugen] Cryptoflex e-gate USB token (ugen0) communicati
o usb/71416 usb [ugen] Cryptoflex e-gate USB token (ugen0) detach is n
o usb/71280 usb [aue] aue0 device (linksys usb100tx) doesn't work in 1
o usb/71155 usb [ulpt] misbehaving usb-printer hangs processes, causes
o usb/70523 usb [umct] [patch] umct sending/receiving wrong characters
o usb/69006 usb [usbdevs] [patch] Apple Cinema Display hangs USB ports
o usb/68232 usb [ugen] [patch] ugen(4) isochronous handling correction
o usb/67301 usb [uftdi] [panic] RTS and system panic
o usb/66547 usb [ucom] Palm Tungsten T USB does not initialize correct
o usb/63621 usb [umass] [panic] USB MemoryStick Reader stalls/crashes
s usb/62257 usb [umass] [request] card reader UCR-61S2B is only half-s
o usb/59698 usb [keyboard] [patch] Rework of ukbd HID to AT code trans
s bin/57255 usb [patch] usbd(8) and multi-function devices
s usb/52026 usb [usb] [request] umass driver support for InSystem ISD2
s usb/51958 usb [urio] [patch] update for urio driver
o i386/46371 usb USB controller cannot be initialized on IBM Netfinity
o usb/40948 usb [umass] [request] USB HP CDW8200 does not work
o usb/30929 usb [usb] [patch] use usbd to initialize USB ADSL modem

314 problems total.

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

usb/140590: [bluetooth] [usb] ng_ubt(4) ng_l2cap_process_cmd_rej warnings

2009-11-15T18:02:50Z

>Number: 140590
>Category: usb
>Synopsis: [bluetooth] [usb] ng_ubt(4) ng_l2cap_process_cmd_rej warnings
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-usb
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Mon Nov 16 02:10:01 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator: Alexander Best
>Release: 9.0-CURRENT
>Organization:
>Environment:

FreeBSD otaku 9.0-CURRENT FreeBSD 9.0-CURRENT #7 r199258M: Sat Nov 14 00:05:10 CET 2009 root@otaku:/usr/obj/usr/src/sys/ARUNDEL i386
>Description:
when receiving data with my usb bluetooth dongle device i'm getting these warnings:

ng_l2cap_process_cmd_rej: ubt0l2cap - unexpected L2CAP_CommandRej command. Requested ident does not exist, ident=2
ng_l2cap_process_cmd_rej: ubt0l2cap - unexpected L2CAP_CommandRej command. Requested ident does not exist, ident=2

when sending data these are the warnings appear:

ng_l2cap_process_cmd_rej: ubt0l2cap - unexpected L2CAP_CommandRej command. Requested ident does not exist, ident=1
ng_l2cap_process_cmd_rej: ubt0l2cap - unexpected L2CAP_CommandRej command. Requested ident does not exist, ident=1
ng_btsocket_rfcomm_receive_dm: Got DM for non-existing dlci=18

this is my device:

ugen3.3: <product 0x0001 vendor 0x0a12> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON

bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0200
bDeviceClass = 0x00e0
bDeviceSubClass = 0x0001
bDeviceProtocol = 0x0001
bMaxPacketSize0 = 0x0040
idVendor = 0x0a12
idProduct = 0x0001
bcdDevice = 0x1593
iManufacturer = 0x0000 <no string>
iProduct = 0x0000 <no string>
iSerialNumber = 0x0000 <no string>
bNumConfigurations = 0x0001

i have the following devd.conf entries installed to start bluetooth services upon attach:

attach 100 {
device-name "ubt[0-9]+";
action "/etc/rc.d/hcsecd onestart";
action "/etc/rc.d/sdpd onestart";
action "/etc/rc.d/bluetooth quietstart $device-name";
action "/usr/local/bin/obexapp -u arundel -r /var/spool/obex -s -C1";
};

this is the detach entry:

detach 100 {
device-name "ubt[0-9]+";
action "/usr/bin/killall obexapp";
action "/etc/rc.d/bluetooth quietstop $device-name";
action "/etc/rc.d/sdpd onestop";
action "/etc/rc.d/hcsecd onestop";
};

cheers.
alex
>How-To-Repeat:

>Fix:

>Release-Note:
>Audit-Trail:
>Unformatted:
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

usb samsung yp-r1 device issue

2009-11-14T10:30:32Z

Hi !

In short, this is the issue. Plugging in a Samsung Portable Player, the system _always_ reports ( I marked some lines with '[*]'):
"umass0: <SAMSUNG Electronics.Co.Ltd YP-R1, class 0/0, rev 2.00/2.00, addr 2> on uhub3
[*](probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
[*](probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
[*](probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
[*](probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0
[*](probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred
[*](probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)

da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Samsung YP-R1 0322> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers"

Do the lines marked with [*] represent an usual/accepted/normal/safe behaviour ? Any action must be taken ? The same thing _sometimes_ happens for an external usb cd. Both the devices seem to work fine.
Here's uname output :

7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009 root@...:/usr/obj/usr/src/sys/GENERIC i386

Thanks for advices,
dan

_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."

Problem with usb external storage

2009-11-13T10:43:30Z

Hi,
firstly: hello everyone, its my first mail here:) I hope my english would be
understoodable enough.
secondly: i have problem with my external storage (hdd) connected
by usb.

The Problem:
I plugged the hdd (in 3'5 chasis with usb connector) into the
usb slot in my server.
As you can see in dmesg (you can find it below) - freebsd has recognized it
properly.
Disk has linux partition but no file system.
I tried to format it and this is what i got:
-bash-2.05b# newfs /dev/da0s1
newfs: wtfs: 512 bytes at sector 390716801: Inappropriate ioctl for device

disklabel:
-bash-2.05b# disklabel /dev/da0s1
disklabel: /dev/da0s1 read: Unknown error: 0

I tried to do fdisk i label this disk by sysinstall tool,
but it wasnt able to write it:
ERROR: Unable to write data to disk da0!

Disk is 100% healthy - i plugged it into my notebook's usb
port (with rescue cd) and i was able to format it, read, write, etc. Then I
reformated it with ntfs and plugged into freebsd again. This time i could
mount it as ntfs but nothing else - writing nor erasing was possible.
Even dd was unable to write enything on it.
So i'm completly run out of ideas. I suspect usb drivers but i dont know how
to check it and repair.
Could you help me?

Software:
FBSD 6.2
kernel options:
# SCSI peripherals
device scbus
device da
device pass
device ses

# USB support
device uhci
device ohci
device ehci
device usb
device ugen
device uhid
device umass

Hardware:
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xdc00-0xdc1f irq 11
at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
[...]

umass0: Super Top USB 2.0 IDE DEVICE, rev 2.00/2.01, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <WDC WD20 00JB-00KFA0 \\0000\\0000> Fixed Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 190782MB (390721968 512 byte sectors: 255H 63S/T 24321C)
_______________________________________________
freebsd-usb@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "freebsd-usb-unsubscribe@..."