gssm_usrp.py usrp overrun?

View: New views

4 Messages — Rating Filter: Alert me

gssm_usrp.py usrp overrun?

by Sylv1-2 :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hello,
im trying to use the gssm_usrp.py script together with wireshark in order to see the GSM packets on the 936MHz frequency.
I run gnuradio3.2.1.
But when i run the script i get the following usrp Overrun :

ls@ls:~/Desktop/airprobe/gssm/src/python$ sudo ./gssm_usrp.py
>>> gr_fir_ccf: using SSE
>>> gr_fir_fff: using SSE
uOuOuOuOuOuOuOuOuO

I run it on an Dell computer with Intel Pentium4 2.8GHz, 1GB RAM with Ubuntu 9.04 kernel version 2.6.30.9

I also tried on an Intel 3GHz, 2GB RAM with Ubuntu 9.04 and standard kernel and get the same trace.

It gives the same if i set the sample width to 8 bits for the usrp source.
Does anybody know if my hardware is to slow to manage the packets or is there another issue with the script or gnuradio?

Thanks to all
Sylvain

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@...
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Re: gssm_usrp.py usrp overrun?

by Joshua Lackey-2 :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Sylvain,

Truthfully, that project is very old and I'm not surprised that you're
having issues with it. I only keep the page up for reference purposes.

I recommend you check out the airprobe project.
( https://svn.berlin.ccc.de/projects/airprobe .) This project is being
actively supported and should be a lot easier to get to work.

I'll put something up on the GSSM page that indicates this so that other
people don't end up wasting time trying to get gssm to run.

Quoting Sylv1 (sylv1ain@...):

>
> Hello,
> im trying to use the gssm_usrp.py script together with wireshark in order to see the?GSM packets on the 936MHz frequency.
> I run gnuradio3.2.1.
> But when i run the script i get the following usrp Overrun :
>
> ls@ls:~/Desktop/airprobe/gssm/src/python$ sudo ./gssm_usrp.py
> >>> gr_fir_ccf: using SSE
> >>> gr_fir_fff: using SSE
> uOuOuOuOuOuOuOuOuO
>
>
> I run it on an Dell computer with Intel Pentium4 2.8GHz, 1GB RAM with Ubuntu 9.04 kernel version 2.6.30.9
>
> I also tried on an Intel 3GHz, 2GB RAM with Ubuntu 9.04 and standard kernel and get the same trace.
>
> It gives the same if i set the sample width to 8 bits for the usrp source.
> Does anybody know if my hardware is to slow to manage the packets or is there another issue with the script or gnuradio?
>
> Thanks to all
> Sylvain
>
>
>

> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@...
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@...
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Re: gssm_usrp.py usrp overrun?

by Sylv1-2 :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hello,

thanks for the answer but actually gssm is part of the airprobe project. This is the source is use.

My first thought is that my computer is to slow to manage the packets sent on the USB.

I will try to test it on new computer and let you know once done.

But if someone knows the problem, pelase help me.

Thks

Sylvain

--- On Tue, 11/3/09, Joshua Lackey <jl@...> wrote:

From: Joshua Lackey <jl@...>
Subject: Re: [Discuss-gnuradio] gssm_usrp.py usrp overrun?
To: "Sylv1" <sylv1ain@...>
Cc: discuss-gnuradio@...
Date: Tuesday, November 3, 2009, 11:04 PM

Sylvain,

Truthfully, that project is very old and I'm not surprised that you're
having issues with it. I only keep the page up for reference purposes.

I recommend you check out the airprobe project.
( https://svn.berlin.ccc.de/projects/airprobe .) This project is being
actively supported and should be a lot easier to get to work.

I'll put something up on the GSSM page that indicates this so that other
people don't end up wasting time trying to get gssm to run.

Quoting Sylv1 (sylv1ain@...):

>
> Hello,
> im trying to use the gssm_usrp.py script together with wireshark in order to see the?GSM packets on the 936MHz frequency.
> I run gnuradio3.2.1.
> But when i run the script i get the following usrp Overrun :
>
> ls@ls:~/Desktop/airprobe/gssm/src/python$ sudo ./gssm_usrp.py
> >>> gr_fir_ccf: using SSE
> >>> gr_fir_fff: using SSE
> uOuOuOuOuOuOuOuOuO
>
>
> I run it on an Dell computer with Intel Pentium4 2.8GHz, 1GB RAM with Ubuntu 9.04 kernel version 2.6.30.9
>
> I also tried on an Intel 3GHz, 2GB RAM with Ubuntu 9.04 and standard kernel and get the same trace.
>
> It gives the same if i set the sample width to 8 bits for the usrp source.
> Does anybody know if my hardware is to slow to manage the packets or is there another issue with the script or gnuradio?
>
> Thanks to all
> Sylvain
>
>
>

> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@...
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@...
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Re: gssm_usrp.py usrp overrun?

by Joshua Lackey-2 :: Rate this Message:

Reply to Author | View Threaded | Show Only this Message

Hmmm... Interesting. I didn't realize they saved those bits.

I'll have to grab their files and figure out what they are doing.

Quoting Sylv1 (sylv1ain@...):

> Hello,
> thanks for the answer but actually gssm is part of the airprobe project. This is the source is use.
> My first thought is that my computer is to slow to manage the packets sent on the USB.
> I will try to test it on new computer and let you know once done.
> But if someone knows the problem, pelase help me.
> Thks
> Sylvain
>
> --- On Tue, 11/3/09, Joshua Lackey <jl@...> wrote:
>
>
> From: Joshua Lackey <jl@...>
> Subject: Re: [Discuss-gnuradio] gssm_usrp.py usrp overrun?
> To: "Sylv1" <sylv1ain@...>
> Cc: discuss-gnuradio@...
> Date: Tuesday, November 3, 2009, 11:04 PM
>
>
> Sylvain,
>
> Truthfully, that project is very old and I'm not surprised that you're
> having issues with it.? I only keep the page up for reference purposes.
>
> I recommend you check out the airprobe project.
> ( https://svn.berlin.ccc.de/projects/airprobe .)? This project is being
> actively supported and should be a lot easier to get to work.
>
> I'll put something up on the GSSM page that indicates this so that other
> people don't end up wasting time trying to get gssm to run.
>
>
> Quoting Sylv1 (sylv1ain@...):
> >
> > Hello,
> > im trying to use the gssm_usrp.py script together with wireshark in order to see the?GSM packets on the 936MHz frequency.
> > I run gnuradio3.2.1.
> > But when i run the script i get the following usrp Overrun :
> >
> > ls@ls:~/Desktop/airprobe/gssm/src/python$ sudo ./gssm_usrp.py
> > >>> gr_fir_ccf: using SSE
> > >>> gr_fir_fff: using SSE
> > uOuOuOuOuOuOuOuOuO
> >
> >
> > I run it on an Dell computer with Intel Pentium4 2.8GHz, 1GB RAM with Ubuntu 9.04 kernel version 2.6.30.9
> >
> > I also tried on an Intel 3GHz, 2GB RAM with Ubuntu 9.04 and standard kernel and get the same trace.
> >
> > It gives the same if i set the sample width to 8 bits for the usrp source.
> > Does anybody know if my hardware is to slow to manage the packets or is there another issue with the script or gnuradio?
> >
> > Thanks to all
> > Sylvain
> >
> >
> >
>
> > _______________________________________________
> > Discuss-gnuradio mailing list
> > Discuss-gnuradio@...
> > http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
>
>

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@...
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio