is a kernel 2.6.14.* patch available

[Ronny Seffner]

Hi all,

you can see my whole question at the subjet. I would likt to
use cipe under linux2.6.14.2 and can't find a working patch.

any hints?




Mit freundlichen Grüßen / With kind regards

      Ronny Seffner

--

IT-SYSTEME Ronny Seffner | web  http://www.its-seffner.de
                         | mail r.seffner@...
Pirnaer Landstraße 205   | tel  (+ 49) 03 51 / 2 00 18 53
D-01259 Dresden          | funk (+ 49) 01 74 / 9 47 44 39


--
Message sent by the cipe-l@... mailing list.
Unsubscribe: mail majordomo@..., "unsubscribe cipe-l" in body
Other commands available with "help" in body to the same address.
CIPE info and list archive: <URL:http://sites.inka.de/~bigred/devel/cipe.html>

[Karl Kleinpaste]

Have you tried Dick St.Peters' patch against 2.6.12?  It worked fine
for .13, past which I haven't bothered to upgrade.

--
Message sent by the cipe-l@... mailing list.
Unsubscribe: mail majordomo@..., "unsubscribe cipe-l" in body
Other commands available with "help" in body to the same address.
CIPE info and list archive: <URL:http://sites.inka.de/~bigred/devel/cipe.html>

[Ronny Seffner]

Yes, I found patches against 2.6.12 and 2.6.13 but they don't worked
completely.




Mit freundlichen Grüßen / With kind regards

      Ronny Seffner



--
Message sent by the cipe-l@... mailing list.
Unsubscribe: mail majordomo@..., "unsubscribe cipe-l" in body
Other commands available with "help" in body to the same address.
CIPE info and list archive: <URL:http://sites.inka.de/~bigred/devel/cipe.html>

[Dick St.Peters]

I've posted a new cipe patch, for kernel 2.6.14.2, at

  ftp://ftp.netheaven.com/pub/cipe/cipe-1.6.0.-kernel-2.6.14.2.patch

The patched cipe will probably work for 2.6.14 and 2.6.14.1, but I
have not tried them.

--
Dick St.Peters, stpeters@...

--
Message sent by the cipe-l@... mailing list.
Unsubscribe: mail majordomo@..., "unsubscribe cipe-l" in body
Other commands available with "help" in body to the same address.
CIPE info and list archive: <URL:http://sites.inka.de/~bigred/devel/cipe.html>

[Stephan von Krawczynski]

Hi Dick,

this patch freezes on a plain SuSE 10.0 with 2.6.14.3 when keys are used. With
nokeys it does not. You do not even need another endpoint connected, just load
and wait 10 secs.
There seem to be no syslog-msgs or so.
Any ideas or things to check?

Regards,
Stephan

PS: I did a similar patch myself and it has the same problem ...


On Wed, 16 Nov 2005 09:59:36 -0500
"Dick St.Peters" <stpeters@...> wrote:

> I've posted a new cipe patch, for kernel 2.6.14.2, at
>
>   ftp://ftp.netheaven.com/pub/cipe/cipe-1.6.0.-kernel-2.6.14.2.patch
>
> The patched cipe will probably work for 2.6.14 and 2.6.14.1, but I
> have not tried them.
>
> --
> Dick St.Peters, stpeters@...
>
> --
> Message sent by the cipe-l@... mailing list.
> Unsubscribe: mail majordomo@..., "unsubscribe cipe-l" in body
> Other commands available with "help" in body to the same address.
> CIPE info and list archive:
> <URL:http://sites.inka.de/~bigred/devel/cipe.html>
>

--
Message sent by the cipe-l@... mailing list.
Unsubscribe: mail majordomo@..., "unsubscribe cipe-l" in body
Other commands available with "help" in body to the same address.
CIPE info and list archive: <URL:http://sites.inka.de/~bigred/devel/cipe.html>

[Vitaly Protsko]

Hi!

Seems, it is an old-old mis-design (?) "feature" - compile your kernel w/o
"regparam" and cipe will go to work properly ...

Can anybody look onto it to fix?

/aTan

> -----Original Message-----
> From: owner-cipe-l@... [mailto:owner-cipe-l@...] On
> Behalf Of Stephan von Krawczynski
> Sent: Sunday, November 27, 2005 3:32 PM
> To: Dick St.Peters
> Cc: cipe-l@...
> Subject: Re: AW: is a kernel 2.6.14.* patch available
>
>
> Hi Dick,
>
> this patch freezes on a plain SuSE 10.0 with 2.6.14.3 when
> keys are used. With nokeys it does not. You do not even need
> another endpoint connected, just load and wait 10 secs. There
> seem to be no syslog-msgs or so.
> Any ideas or things to check?
>
> Regards,
> Stephan
>
> PS: I did a similar patch myself and it has the same problem ...
>
>
> On Wed, 16 Nov 2005 09:59:36 -0500
> "Dick St.Peters" <stpeters@...> wrote:
>
> > I've posted a new cipe patch, for kernel 2.6.14.2, at
> >
> >   ftp://ftp.netheaven.com/pub/cipe/cipe-1.6.0.-kernel-2.6.14.2.patch
> >
> > The patched cipe will probably work for 2.6.14 and 2.6.14.1, but I
> > have not tried them.
> >
> > --
> > Dick St.Peters, stpeters@...
> >
> > --
> > Message sent by the cipe-l@... mailing list.
> > Unsubscribe: mail majordomo@..., "unsubscribe cipe-l" in body
> > Other commands available with "help" in body to the same
> address. CIPE
> > info and list archive:
> > <URL:http://sites.inka.de/~bigred/devel/cipe.html>
> >
>
> --
> Message sent by the cipe-l@... mailing list.
> Unsubscribe: mail majordomo@..., "unsubscribe cipe-l" in
> body Other commands available with "help" in body to the same
> address. CIPE info and list archive:
> <URL:http://sites.inka.de/~bigred/devel/cipe.html>
>
> !DSPAM:3,4389a99d51489157617324!
>
>

--
Message sent by the cipe-l@... mailing list.
Unsubscribe: mail majordomo@..., "unsubscribe cipe-l" in body
Other commands available with "help" in body to the same address.
CIPE info and list archive: <URL:http://sites.inka.de/~bigred/devel/cipe.html>

[Dick St.Peters]

Vitaly Protsko writes:
> Seems, it is an old-old mis-design (?) "feature" - compile your kernel w/o
> "regparam" and cipe will go to work properly ...
>
> Can anybody look onto it to fix?

Setting the kernel config parameter CONFIG_PARM alters the way the
kernel passes function arguments internally.  Unless a module is
compiled to match it will almost certainly fail.  The module will be
expecting to get arguments from the rest of the kernel on the stack,
but the kernel will pass some of them in registers.

Compiling the cipe kernel module with "-mregparm=3" added to the gcc
arguments should make a working cipe module.  Maybe somebody with a
SUSE kernel could try this ...

--
Dick St.Peters, stpeters@...

--
Message sent by the cipe-l@... mailing list.
Unsubscribe: mail majordomo@..., "unsubscribe cipe-l" in body
Other commands available with "help" in body to the same address.
CIPE info and list archive: <URL:http://sites.inka.de/~bigred/devel/cipe.html>

[Stephan von Krawczynski]

On Sun, 27 Nov 2005 22:06:54 -0500
"Dick St.Peters" <stpeters@...> wrote:

> Vitaly Protsko writes:
> > Seems, it is an old-old mis-design (?) "feature" - compile your kernel w/o
> > "regparam" and cipe will go to work properly ...
> >
> > Can anybody look onto it to fix?
>
> Setting the kernel config parameter CONFIG_PARM alters the way the
> kernel passes function arguments internally.  Unless a module is
> compiled to match it will almost certainly fail.  The module will be
> expecting to get arguments from the rest of the kernel on the stack,
> but the kernel will pass some of them in registers.
>
> Compiling the cipe kernel module with "-mregparm=3" added to the gcc
> arguments should make a working cipe module.  Maybe somebody with a
> SUSE kernel could try this ...

I did, it does not work.

--
Regards,
Stephan

--
Message sent by the cipe-l@... mailing list.
Unsubscribe: mail majordomo@..., "unsubscribe cipe-l" in body
Other commands available with "help" in body to the same address.
CIPE info and list archive: <URL:http://sites.inka.de/~bigred/devel/cipe.html>

[Dick St.Peters]

Stephan von Krawczynski writes:
> "Dick St.Peters" <stpeters@...> wrote:
>
> > Compiling the cipe kernel module with "-mregparm=3" added to the gcc
> > arguments should make a working cipe module.  Maybe somebody with a
> > SUSE kernel could try this ...
>
> I did, it does not work.

Yeah, it's a bit more complicated than it looked at first.  You also
have to declare each system call "asmlinkage".  The declarations are
in linux/syscalls.h from the source tree,  However, simply including
that entire .h file causes multiple compile errors.

A fix of this isn't something I or any of my users need, so I'm done
with this unless I stumble on some spare time someday.

--
Dick St.Peters, stpeters@...

--
Message sent by the cipe-l@... mailing list.
Unsubscribe: mail majordomo@..., "unsubscribe cipe-l" in body
Other commands available with "help" in body to the same address.
CIPE info and list archive: <URL:http://sites.inka.de/~bigred/devel/cipe.html>