Nabble - konq-e

Memory Leak when doing Reload()

2009-10-07T12:38:35Z

Hi

I'm having trouble with a memory leak when doing reloads. I've been
searching for over a week now but am not getting any closer. Could
anyone please help me with this issue? Maybe you can try if your system
behaves the same?

I applied attached patch to konq-e-0.2-20040524 to be able to trigger a
reload externally. I'm then using the attached program in main.cpp which
does the triggering (via QCopChannel).

A simple test page of 2,4kB size causes a leak of about 476kB after a
100 reloads.

I'm cross-compiling for ppc, using qte-3.3.4 and this is my configuration:
./configure --host=ppc-linux --enable-embedded --enable-qt-embedded
--without-arts --disable-pcre --disable-debug --disable-mt
--enable-fontsubs --enable-xmlui --enable-final --prefix=/home/konq-e
--exec-prefix=/home/konq-e
--with-extra-includes=$QTDIR/src/3rdparty/libjpeg
--with-extra-libs=$QTDIR/src/3rdparty/libjpeg --with-ipv6-lookup=n

Many thanks
Stefan.

--- konqueror3-embedded-0.2-20040524.orig/konq-embed/src/view.h 2003-03-17 21:49:02.000000000 +0100
+++ konqueror3-embedded-0.2-20040524/konq-embed/src/view.h 2009-10-07 20:09:51.000000000 +0200
@@ -31,6 +31,8 @@
#include <kparts/factory.h>
#include <kaction.h>

+#include <qcopchannel_qws.h>
+
class QMainWindow;
class KHTMLPart;
class HTMLView;
@@ -226,6 +228,8 @@ protected:
KAction *m_back;
KAction *m_forward;

+ QCopChannel *m_trigger;
+
private:
void setScaling( KHTMLPart *frame );

--- konqueror3-embedded-0.2-20040524.orig/konq-embed/src/view.cc 2003-05-27 18:08:25.000000000 +0200
+++ konqueror3-embedded-0.2-20040524/konq-embed/src/view.cc 2009-10-07 20:02:52.000000000 +0200
@@ -241,6 +241,11 @@ BrowserView::BrowserView( const QString
m_doc->browserExtension()->setBrowserInterface( m_browserIface );

m_goBuffer = 0;
+
+ /* trigger reload() externally */
+ m_trigger = new QCopChannel("extTrigReload", this);
+ QObject::connect( m_trigger, SIGNAL(received(const QCString&,const QByteArray&)),
+ this, SLOT(reload()) );
}

BrowserView::~BrowserView()

/*
* konq Trigger
*
* sending QCopChannel "extTrigReload" causes
* patched konqueror browser to reload its view
*/
#include <qapplication.h>
#include <qcopchannel_qws.h>

int main( int argc, char **argv )
{
QApplication a( argc, argv );
QCopChannel ch("myTrigger");

QCopChannel::send("extTrigReload", "\0");
return 0;
}

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

Re: qte version

2009-10-06T14:17:32Z

Hello Stefan,

the GUI as shown in the screenshot was backported and developed for a Qtopia
platform, being based on Qt2.
The code als runs with Qt3, but this hasn't been tested intensively (if at
all).

Downloads are on the same page if you scroll down. The source code can also be
found in KDE's source repository (see http://techbase.kde.org)

Eva

Am Mo Oktober 5 2009 17:00:23 schrieb Stefan Strobl:

> Hello
>
> according to the website http://www.basyskom.de/index.pl/konqe, the
> current konq/e release was tested under:
> * Qt/E 2.3.12 with mt and rtti support
> * Qtopia 2.2.0
>
> With all the renaming done earlier by trolltech I'm now a little
> confused. As far as I understood QT/E was later renamed to Qtopia-Core
> and then even later back to QT-Embedded-Linux.
>
> I've a working QT/E-3.3.4 as well as newer
> qt-embedded-linux-opensource-src-4.4.3. The Sources I downloaded here:
> ftp://ftp.trolltech.no/pub/qt/source/
>
> According to the version number QT/E-2.3.12 should be older than my
> QT/E-3.3.4. Is that correct? Also I cannot find where to download the
> sources. Can anyone provide me with a link?
>
> Thanks
> Stefan.
> _______________________________________________
> konq-e mailing list
> konq-e@...
> https://mail.kde.org/mailman/listinfo/konq-e
>

--
Eva Brucherseifer
Managing Director

basysKom GmbH
Robert-Bosch-Str. 7 | 64293 Darmstadt | Germany
Tel: +49 6151 3969-961 | Fax: -736 | Mobile: +49 170 5533642
eva.brucherseifer@... | www.basyskom.de

Handelsregister: Darmstadt HRB 9352
Geschaeftsfuehrung: Eva Brucherseifer

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

qte version

2009-10-05T08:00:23Z

Hello

according to the website http://www.basyskom.de/index.pl/konqe, the
current konq/e release was tested under:
* Qt/E 2.3.12 with mt and rtti support
* Qtopia 2.2.0

With all the renaming done earlier by trolltech I'm now a little
confused. As far as I understood QT/E was later renamed to Qtopia-Core
and then even later back to QT-Embedded-Linux.

I've a working QT/E-3.3.4 as well as newer
qt-embedded-linux-opensource-src-4.4.3. The Sources I downloaded here:
ftp://ftp.trolltech.no/pub/qt/source/

According to the version number QT/E-2.3.12 should be older than my
QT/E-3.3.4. Is that correct? Also I cannot find where to download the
sources. Can anyone provide me with a link?

Thanks
Stefan.
_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

Re: how to externally trigger konq-e to refresh view

2009-09-25T00:46:12Z

Uli Luckas wrote:
> On Wednesday, 23. September 2009, Stefan Strobl wrote:
>> Uli Luckas wrote:
>> For my signalling application I'd like to use the qcop tool as you
>> suggested, but I cannot find it anywhere. According to this
>> (http://doc.trolltech.com/qtopia4.3/qcop-tool.html) it should be part of
>> qtopia but I didn't find it nowhere in qte-3.3.4 nor in qte-4.4.3. Can
>> you tell me where to find the sources to the qcop tool?

> Sorry, Stefan.
> You are right, the qcop tool is part of Qtopia only and it seems, these
> sources are no longer offered by Trolltech/Nokia.
> So now you can either write a small command line app, yourself. Or go back to
> the FIFO idea.

Sorry. I again forgot to CC the list. Here we go.

I've done my own little command line tool which works fine. Thanks for
pointing me towards QCopMessages.

AS mentioned, external triggering of reload() works find, apart from a
memory leak. After doing some 100 refresh the memory use of konq
increases from 28308kB up to 31556kB (+11%). This might have to do with
my configuration though, or is this a known issue?

The threading & processes is not an issue anymore. Don't know why I got
confused here.

Regards
Stefan
_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

Re: how to externally trigger konq-e to refresh view

2009-09-24T06:13:59Z

On Wednesday, 23. September 2009, Stefan Strobl wrote:

> Uli Luckas wrote:
> > On Wednesday, 23. September 2009, Stefan Strobl wrote:
> > If you don't want to make your programm a qapplication, you could also
> > send qcop messages by calling the qcop command line application via
> > ::system(). As you sugested you can also use a FIFO or a socket for
> > communication. In the browser, just make sure to use the event loop
> > (QSocket/QSocketNotifier) for asynchronus notification on fifo events.
>
> Thanks for your help. I did manage to use a QCopChannel to call reload()
> in konqueror from another application.
>
> For my signalling application I'd like to use the qcop tool as you
> suggested, but I cannot find it anywhere. According to this
> (http://doc.trolltech.com/qtopia4.3/qcop-tool.html) it should be part of
> qtopia but I didn't find it nowhere in qte-3.3.4 nor in qte-4.4.3. Can
> you tell me where to find the sources to the qcop tool?
>
> Many thanks
> Stefan
>

Sorry, Stefan.

You are right, the qcop tool is part of Qtopia only and it seems, these
sources are no longer offered by Trolltech/Nokia.
So now you can either write a small command line app, yourself. Or go back to
the FIFO idea.

Good Luck
Uli

--

------- ROAD ...the handyPC Company - - - ) ) )

Uli Luckas
Head of Software Development

ROAD GmbH
Bennigsenstr. 14 | 12159 Berlin | Germany
fon: +49 (30) 230069 - 62 | fax: +49 (30) 230069 - 69
url: www.road.de

Amtsgericht Charlottenburg: HRB 96688 B
Managing director: Hans-Peter Constien

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

signature.asc (205 bytes) Download Attachment

Re: how to externally trigger konq-e to refresh view

2009-09-23T12:23:59Z

Uli Luckas wrote:
> On Wednesday, 23. September 2009, Stefan Strobl wrote:
> If you don't want to make your programm a qapplication, you could also send
> qcop messages by calling the qcop command line application via ::system().
> As you sugested you can also use a FIFO or a socket for communication. In the
> browser, just make sure to use the event loop (QSocket/QSocketNotifier) for
> asynchronus notification on fifo events.

Thanks for your help. I did manage to use a QCopChannel to call reload()
in konqueror from another application.

For my signalling application I'd like to use the qcop tool as you
suggested, but I cannot find it anywhere. According to this
(http://doc.trolltech.com/qtopia4.3/qcop-tool.html) it should be part of
qtopia but I didn't find it nowhere in qte-3.3.4 nor in qte-4.4.3. Can
you tell me where to find the sources to the qcop tool?

Many thanks
Stefan
_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

Re: how to externally trigger konq-e to refresh view

2009-09-23T09:02:09Z

On Wednesday, 23. September 2009, Stefan Strobl wrote:

> Hi Uli
>
> thanks for your prompt answer.
>
> Uli Luckas wrote:
> > On Wednesday, 23. September 2009, Stefan Strobl wrote:
> >> What I would like to do is to somehow tell konq-e from another
> >> application XY to reload its current URL. This is of use if application
> >> XY generates and stors a html page locally and wants konqueror to
> >> display/reload it.
> >>
> >> Now, this is how I tried to do it and the problems I ran into:
> >> I thought I use the Unix system signal SIGUSR2 to do the signaling. In
> >> the file view.cc in the BrowserView constructor I'm registering my
> >> "protected: static void sigusr2_handler()" function for SIGUSR2 which is
> >> generally working so far. From this handler I thought of calling the
> >> public slot function reload() which is _not_ working because I cannot
> >> call this non-static function reload() from my static function
> >> sigusr2_handler(). From sigusr2_handler() I also cannot access "HTMLView
> >> *m_doc" for the same reason. On the other hand I cannot make
> >> sigusr2_handler() non-static because sigaction() would complain about
> >> that. I'm lost here. Why can't I access the data even though I'm in the
> >> same class?
> >>
> >> Any ideas what I'm doing wrong? Or maybe ideas about a better approach
> >> to make my application XY cause konq-e to reload its page?
> >
> > Hi Stefan,
> > there are a few problems here.
> > First and most important, there are strict semantics of what is allowed
> > to be done inside a signal handler. Keep in mind, that the signal handler
> > could have interupted the main flow of code at any point and must make
> > sure not to cause any unexpected modifications to the environment of the
> > interrupted code. Please take a look at any unix book and what it tells
> > you about signals.
> >
> > Second, non static methods need an object (an instance of the class) to
> > operate on, static methods, also called "class methods", can be called on
> > the class itself. Please take a look at any C++ book and what it tells
> > you about classes and objects and the difference thereof.
> >
> > Qt/Embedded has a mechanism called qcop for inter process communication:
> > http://doc.trolltech.com/3.3/qcopchannel.html
> > You can extend konq-e to listen for a qcop message which could then
> > trigger a reload.
>
> I now understand that I need an Object to access reload() from a static
> function. I also understand that SIGUSR2 is asynchronous and may
> interrupt the process at the wrong time.
>
> The other thing is that my application doing the signalling is not a
> graphical QT application but a C program. Do you think using a Unix FIFO
> could be an alternative or is it better to make my application XY a QT
> application to be able to use QCopChannel?
>

Please keep the list CCed.

If you don't want to make your programm a qapplication, you could also send
qcop messages by calling the qcop command line application via ::system().
As you sugested you can also use a FIFO or a socket for communication. In the
browser, just make sure to use the event loop (QSocket/QSocketNotifier) for
asynchronus notification on fifo events.

Regards,
Uli

--

------- ROAD ...the handyPC Company - - - ) ) )

Uli Luckas
Head of Software Development

ROAD GmbH
Bennigsenstr. 14 | 12159 Berlin | Germany
fon: +49 (30) 230069 - 62 | fax: +49 (30) 230069 - 69
url: www.road.de

Amtsgericht Charlottenburg: HRB 96688 B
Managing director: Hans-Peter Constien
_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

Re: how to externally trigger konq-e to refresh view

2009-09-23T05:45:17Z

On Wednesday, 23. September 2009, Stefan Strobl wrote:

> Hello
>
> I just subscribed to the list in the hope you can give me some ideas on
> how to solve my problem.
>
> First I should mention that I'm using a rather old version of konq-e and
> qt/embedded, mainly because cross-compilation is already working for my
> PPC computer. I'm using konqueror3-embedded-0.2-20040524 with
> qt/embedded-3.3.4.
>
> What I would like to do is to somehow tell konq-e from another
> application XY to reload its current URL. This is of use if application
> XY generates and stors a html page locally and wants konqueror to
> display/reload it.
>
> Now, this is how I tried to do it and the problems I ran into:
> I thought I use the Unix system signal SIGUSR2 to do the signaling. In
> the file view.cc in the BrowserView constructor I'm registering my
> "protected: static void sigusr2_handler()" function for SIGUSR2 which is
> generally working so far. From this handler I thought of calling the
> public slot function reload() which is _not_ working because I cannot
> call this non-static function reload() from my static function
> sigusr2_handler(). From sigusr2_handler() I also cannot access "HTMLView
> *m_doc" for the same reason. On the other hand I cannot make
> sigusr2_handler() non-static because sigaction() would complain about
> that. I'm lost here. Why can't I access the data even though I'm in the
> same class?
>
> Any ideas what I'm doing wrong? Or maybe ideas about a better approach
> to make my application XY cause konq-e to reload its page?
>

Hi Stefan,
there are a few problems here.
First and most important, there are strict semantics of what is allowed to be
done inside a signal handler. Keep in mind, that the signal handler could have
interupted the main flow of code at any point and must make sure not to cause
any unexpected modifications to the environment of the interrupted code.
Please take a look at any unix book and what it tells you about signals.

Second, non static methods need an object (an instance of the class) to
operate on, static methods, also called "class methods", can be called on the
class itself. Please take a look at any C++ book and what it tells you about
classes and objects and the difference thereof.

Qt/Embedded has a mechanism called qcop for inter process communication:
http://doc.trolltech.com/3.3/qcopchannel.html
You can extend konq-e to listen for a qcop message which could then trigger a
reload.

Regards,
Uli

--

------- ROAD ...the handyPC Company - - - ) ) )

Uli Luckas
Head of Software Development

ROAD GmbH
Bennigsenstr. 14 | 12159 Berlin | Germany
fon: +49 (30) 230069 - 62 | fax: +49 (30) 230069 - 69
url: www.road.de

Amtsgericht Charlottenburg: HRB 96688 B
Managing director: Hans-Peter Constien
_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

how to externally trigger konq-e to refresh view

2009-09-23T04:29:45Z

externally trigger konq-e to reload site

2009-09-23T04:27:46Z

Hello

I just subscribed to the list in the hope you can give me some ideas on
how to solve my problem.

First I should mention that I'm using a rather old version of konq-e and
qt/embedded, mainly because cross-compilation is already working for my
PPC computer. I'm using konqueror3-embedded-0.2-20040524 with
qt/embedded-3.3.4.

What I would like to do is to somehow tell konq-e from another
application XY to reload its current URL. This is of use if application
XY generates and stors a html page locally and wants konqueror to
display/reload it.

Now, this is how I tried to do it and the problems I ran into:
I thought I use the Unix system signal SIGUSR2 to do the signaling. In
the file view.cc in the BrowserView constructor I'm registering my
"protected: static void sigusr2_handler()" function for SIGUSR2 which is
generally working so far. From this handler I thought of calling the
public slot function reload() which is _not_ working because I cannot
call this non-static function reload() from my static function
sigusr2_handler(). From sigusr2_handler() I also cannot access "HTMLView
*m_doc" for the same reason. On the other hand I cannot make
sigusr2_handler() non-static because sigaction() would complain about
that. I'm lost here. Why can't I access the data even though I'm in the
same class?

Any ideas what I'm doing wrong? Or maybe ideas about a better approach
to make my application XY cause konq-e to reload its page?

Any help i highly appreciated.
Thanks
Stefan.

-----
Gersys GmbH, Hans-Urmiller-Ring 12a, D-82515 Wolfratshausen, Germany
Geschaeftsfuehrer: Erwin Sterzer, HRB 137 872 Muenchen, Fon: +49(0)8171 38626-0

Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient or have received this e-mail in error please notify the sender immediately and destroy this e-mail. Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

[Bug 150990] kbuildsycoca , konqueror , apps crashs steady, application not found

2009-08-31T04:38:22Z

https://bugs.kde.org/show_bug.cgi?id=150990

FiNeX <finex@...> changed:

What |Removed |Added
----------------------------------------------------------------------------
Status|UNCONFIRMED |RESOLVED
CC| |finex@...
Component|konq-e |general
Resolution| |INVALID
AssignedTo|konq-e@... |unassigned-bugs@...
Product|konqueror |unknown

--- Comment #2 from FiNeX <finex finex org> 2009-08-31 13:37:54 ---
The problem described is too much generic. Did you install particular software
before the problem or did you accidentally deleted/modified configuration
files? Did you experienced the problem using more recent KDE versions?

Moreover KDE 4 uses a new configuration system so this issue probably is no
more reproducible. But it looks like more a packaging/configuration problem.

Please reopen if you can give more details

--
Configure bugmail: https://bugs.kde.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

[Bug 123330] segfault on flash pages

2009-08-23T02:58:14Z

https://bugs.kde.org/show_bug.cgi?id=123330

FiNeX <finex@...> changed:

What |Removed |Added
----------------------------------------------------------------------------
Status|UNCONFIRMED |NEEDSINFO
CC| |finex@...,
| |l.lunak@...
Resolution| |WAITINGFORINFO

--- Comment #5 from FiNeX <finex finex org> 2009-08-23 11:58:11 ---
It looks like nobody is working on that project. Moreover the mailing list
looks quite abandoned. Someone knows who developed it?

--
Configure bugmail: https://bugs.kde.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

Bugzilla default assignees

2009-07-14T09:15:41Z

Hi,

I am sending you this email because your list is the default assignee
for one or more products on bugs.kde.org.
Please let me know if this is still how you want it or if something
should be changed.
Thanks for helping me find unmaintained parts of KDE :)

Cheers
Lydia

--
Lydia Pintscher
Amarok community manager
kde.org - amarok.kde.org - kubuntu.org
claimid.com/nightrose
_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

[Bug 123330] segfault on flash pages

2009-05-28T04:42:26Z

https://bugs.kde.org/show_bug.cgi?id=123330

A. Spehr <zahl@...> changed:

What |Removed |Added
----------------------------------------------------------------------------
CC|l.lunak@... |
AssignedTo|konq-bugs@... |konq-e@...

--- Comment #4 from A. Spehr <zahl transbay net> 2009-05-28 13:42:24 ---
There seems to be a konq-e mailing list.... (I don't know why it didn't go
there originally?) I'm not sure if this is still a useful bug report in terms
of how much the code has changed, though.

--
Configure bugmail: https://bugs.kde.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

Re: The worst error when compiling the Konqueror code

2009-02-27T08:05:39Z

On Thursday, 26. February 2009, 刘富国 wrote:
> Hi
> I got the following error when compiling the Konqueror code:
>
> *kresolver_p.h:116: error: 'QMutex' does not name a type

> i have gooled and searched all the similar errors but seems that nobody has
> resolved the error above!
> I asked in the google and also nobody built the Konqueror code
> successfully. I am a fraid it might be a bug to the source code.
> Can you give me a clue?
> I' d appreciate very much!
> Thanks in advance.
It looks like your Qt does not birng thread support. Thread support is needed
for konquerror-embedded

Uli

--

------- ROAD ...the handyPC Company - - - ) ) )

Uli Luckas
Head of Software Development

ROAD GmbH
Bennigsenstr. 14 | 12159 Berlin | Germany
fon: +49 (30) 230069 - 62 | fax: +49 (30) 230069 - 69
url: www.road.de

Amtsgericht Charlottenburg: HRB 96688 B
Managing director: Hans-Peter Constien

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

signature.asc (204 bytes) Download Attachment

The worst error when compiling the Konqueror code

2009-02-25T19:51:04Z

Hi
I got the following error when compiling the Konqueror code:

kresolver_p.h:116: error: 'QMutex' does not name a type
kresolver_p.h:167: error: 'QWaitCondition' does not name a type
kresolver_p.h:186: error: 'QWaitCondition' does not name a type
kresolver_p.h:189: error: 'QMutex' does not name a type
kresolver_p.h:328: error: expected class-name before '{' token
kresolver.cpp:67: error: 'QMutex' does not name a type
kresolver.cpp: In member function 'Q_UINT16 KNetwork::KResolverEntry::length() const':
kresolver.cpp:151: warning: conversion to 'Q_UINT16' from 'int' may alter its value
kresolver.cpp: In member function 'bool KNetwork::KResolver::wait(int)':
kresolver.cpp:470: error: 'QMutexLocker' was not declared in this scope
kresolver.cpp:470: error: expected `;' before 'locker'
kresolver.cpp:492: error: 'class KNetwork::Internal::KResolverManager' has no member named 'notifyWaiters'
kresolver.cpp:492: error: 'class KNetwork::KResolverPrivate' has no member named 'mutex'
kresolver.cpp:494: error: 'class KNetwork::Internal::KResolverManager' has no member named 'notifyWaiters'
kresolver.cpp:494: error: 'class KNetwork::KResolverPrivate' has no member named 'mutex'
kresolver.cpp: In static member function 'static QStrList KNetwork::KResolver::protocolName(int)':
kresolver.cpp:623: error: 'QMutexLocker' was not declared in this scope
kresolver.cpp:623: error: expected `;' before 'locker'
kresolver.cpp: In static member function 'static QStrList KNetwork::KResolver::protocolName(const char*)':
kresolver.cpp:669: error: 'QMutexLocker' was not declared in this scope
kresolver.cpp:669: error: expected `;' before 'locker'
kresolver.cpp: In static member function 'static int KNetwork::KResolver::protocolNumber(const char*)':
kresolver.cpp:715: error: 'QMutexLocker' was not declared in this scope
kresolver.cpp:715: error: expected `;' before 'locker'
kresolver.cpp: In static member function 'static int KNetwork::KResolver::servicePort(const char*, const char*)':
kresolver.cpp:757: error: 'QMutexLocker' was not declared in this scope
kresolver.cpp:757: error: expected `;' before 'locker'
kresolver.cpp:786: warning: conversion to 'short unsigned int' from 'int' may alter its value
kresolver.cpp:786: warning: conversion to 'short unsigned int' from 'int' may alter its value
kresolver.cpp: In static member function 'static QStrList KNetwork::KResolver::serviceName(const char*, const char*)':
kresolver.cpp:799: error: 'QMutexLocker' was not declared in this scope
kresolver.cpp:799: error: expected `;' before 'locker'
kresolver.cpp: In static member function 'static QStrList KNetwork::KResolver::serviceName(int, const char*)':
kresolver.cpp:845: error: 'QMutexLocker' was not declared in this scope
kresolver.cpp:845: error: expected `;' before 'locker'

i have gooled and searched all the similar errors but seems that nobody has resolved the error above!
I asked in the google and also nobody built the Konqueror code successfully.
I am a fraid it might be a bug to the source code.
Can you give me a clue?
I' d appreciate very much!
Thanks in advance.

Best always.
Richard

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

what is the neccessary requirement to build Konqueror code successfully?

2009-02-25T19:23:07Z

hi.
I always got errors when building Konqueror code.
sombody told me that I used the wrong version of gcc or qtopia!

but by following instruction from http://www.basyskom.de/index.pl/konqe.
I got lots of errors.I can't stand that anymore.

My QT version is qt3(I can't find 2.3.12),
qtopia is 4.3.2(I can't find 2.2.0) ,
Konqueror kdenox_snapshot_qt2_20070320,
gcc 4.3.2.

Is there anything wrong with my tools?

Good luck!
Thanks in advance!
Richard

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

20009 is coming

2008-12-25T18:41:21Z

Happy New Year!
_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

Re: konq-e Digest, Vol 67, Issue 2

2008-12-05T03:25:28Z

From: "Enen Lobo" <enenlobo@...>
Subject: Compatibility of Konqueror embedded & Qt/Embedded
To: konq-e@...
Message-ID:
<c0222a930812030237i4a089c75ya7d7c194e0754e57@...>
Content-Type: text/plain; charset="iso-8859-1"

Hello,

I need some information on Konqueror-Qt/Embedded compatibility.
Can someone please tell me which version of Konqueror(if any) works on
qt-embedded-linux-opensource-src-4.4.3.
As of now, I'm itending to use 3.5.9 version of konq-embedded.
Please advise.

konqueror3-embedded-0.2-20060121 is not woring with Qt/e 4.4.3...you can test with Qt/e 3

see konqueror was developed on qt classes. If you are trying to compile konqueror with qt/e-4.4.3..there will be lot of c++ errors will be thrown..

as far as konqueror3-embedded-0.2-20060121 is workin well with Qtopia-2.2.1

--
அன்புடன்
அருண்
------------------------------
http://ubuntu-tam.org
http://lists.ubuntu.com/ubuntu-l10n-tam
http://lists.ubuntu.com/ubuntu-tam
------------------------------

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

Re: konq-e Digest, Vol 67, Issue 1

2008-12-04T20:00:27Z

ST-Linux... Unfortunately I dont have the luxury of time to start developing or changing the code. :(
So this means that Konq/E hasn't been successfully ported over Qt4 yet!

2008/12/4 தங்கமணி அருண் <thangam.arunx@...>

I think some the developers are working on that....you have to do lot of code changes in the konq-e...

if you are a good developer go head..One more Qn?? which platform are you trying to port ???

-Arun

Hey,

Can someone please advise me about the Konq/E version that has been tested
on Qt/E 4.4.3 ? (qt-embedded-linux-opensource-src-4.4.3)
I've downloaded the 'konqueror3-embedded-0.2-20060121.tar.bz2' snapshot. Has
this been ported to work with Qt4 versions?

Thnx,
Enen

--
அன்புடன்
அருண்
------------------------------
http://ubuntu-tam.org
http://lists.ubuntu.com/ubuntu-l10n-tam
http://lists.ubuntu.com/ubuntu-tam
------------------------------

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

Re: konq-e Digest, Vol 67, Issue 1

2008-12-04T05:14:41Z

I think some the developers are working on that....you have to do lot of code changes in the konq-e...

if you are a good developer go head..One more Qn?? which platform are you trying to port ???

-Arun

Hey,

Can someone please advise me about the Konq/E version that has been tested
on Qt/E 4.4.3 ? (qt-embedded-linux-opensource-src-4.4.3)
I've downloaded the 'konqueror3-embedded-0.2-20060121.tar.bz2' snapshot. Has
this been ported to work with Qt4 versions?

Thnx,
Enen

--
அன்புடன்
அருண்
------------------------------
http://ubuntu-tam.org
http://lists.ubuntu.com/ubuntu-l10n-tam
http://lists.ubuntu.com/ubuntu-tam
------------------------------

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

Running Konq/E on Qt/E

2008-12-03T22:23:40Z

Hey,

Can someone please advise me about the Konq/E version that has been tested on Qt/E 4.4.3 ? (qt-embedded-linux-opensource-src-4.4.3)
I've downloaded the 'konqueror3-embedded-0.2-20060121.tar.bz2' snapshot. Has this been ported to work with Qt4 versions?

Thnx,
Enen

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

Compatibility of Konqueror embedded & Qt/Embedded

2008-12-03T02:37:15Z

Hello,

I need some information on Konqueror-Qt/Embedded compatibility.
Can someone please tell me which version of Konqueror(if any) works on qt-embedded-linux-opensource-src-4.4.3.
As of now, I'm itending to use 3.5.9 version of konq-embedded.
Please advise.

Warm regards,
Enen

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

[Bug 36894] Embedded MP3 player may be executed at the left of konq

2008-11-28T16:19:50Z

http://bugs.kde.org/show_bug.cgi?id=36894

Luciano Montanaro mikelima cirulla net changed:

What |Removed |Added
----------------------------------------------------------------------------
CC| |mikelima@...

--- Comment #3 from Luciano Montanaro <mikelima cirulla net> 2008-11-29 01:19:50 ---
Isn't Konqueror still the universal viewer?
It should still be able to embed a kpart the same way kde3 konqueror did to
play movies or sounds. Or show images and documents.

Then again, the part would need to handle the display/controls, since Konqueror
is generic.

--
Configure bugmail: http://bugs.kde.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

New joiner & Question

2008-11-23T23:05:31Z

Hi the konq-e developer Team:

I am a student of CS major.Presently our team is working on a project about the konq-emb.Compared the common konq-emb ,there are some differeces in our project. we need the konq-emb to be runned on a ARM7 board which has not MMU & with uClinux OS. Because of the hardware constraint an the spacific OS, we reached some tough problems.

such as:

Kernel panic : Aiee killing interrupt handler

GPF

SIGSEV

I hope you can give some help for us or some iformations about how slove such problems.

I also want to join your group for konq-emb developing group .

Best Wishs!

weizhou.sir@...

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

[Bug 36894] Embedded MP3 player may be executed at the left of konq

2008-11-19T14:41:40Z

http://bugs.kde.org/show_bug.cgi?id=36894

FiNeX finex finex org changed:

What |Removed |Added
----------------------------------------------------------------------------
CC| |finex@...
Status|UNCONFIRMED |RESOLVED
Resolution| |WONTFIX

--- Comment #2 from FiNeX <finex finex org> 2008-11-19 23:41:39 ---
I agree with Martin. Moreover konqueror 4 doesn't have an integrated player.
mp3 are managed by juk (default player) or, eventually, by amarok :-)

--
Configure bugmail: http://bugs.kde.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

hi

2008-11-06T04:10:21Z

hi there? Iwanted to ask you if unix and linux are the same in command
rgd
liveti

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

smb related question

2008-10-23T13:57:27Z

Hello,

If I try to open a directory on a samba shared volume, a password popup
window is launched. When this popup window is correctly filled in the
path to the samba shared volume is adjusted with my user information and
the directory opens correctly in konqueror.

If I try to open a word or excel document on a samba shared volume the
password popup window is not launched and konqueror launches the open
office application with the unchanged path to the document on the samba
shared volume. The user information is not present in the path. The
operation fails with the message file not found. How can I fix this?

Regards,
Albert.

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

[Bug 150990] kbuildsycoca , konqueror , apps crashs steady, application not found

2008-09-08T20:08:11Z

http://bugs.kde.org/show_bug.cgi?id=150990

Dr Smit Shrivastava dr_smit indiatimes com changed:

What |Removed |Added
----------------------------------------------------------------------------
CC| |dr_smit@...

--- Comment #1 from Dr Smit Shrivastava <dr_smit indiatimes com> 2008-09-09 05:08:08 ---
K3b crashes as I try to burn a data cd in mandriva 2008.1 KDE4.1 (recently
installed) and the following is the crash output:--

Application: K3b (k3b), signal SIGSEGV
(no debugging symbols found)
Using host libthread_db library "/lib/i686/libthread_db.so.1".
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread -1250662704 (LWP 7759)]
[New Thread -1293423728 (LWP 7779)]
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[KCrash handler]
#6 0x0815cf3d in ?? ()
#7 0x08159d92 in ?? ()
#8 0x08159797 in ?? ()
#9 0xb6bff41a in QTreeView::sizeHintForColumn () from /usr/lib/libQtGui.so.4
#10 0xb6bf5501 in QTreeView::resizeColumnToContents ()
from /usr/lib/libQtGui.so.4
#11 0xb6bf55bc in QAbstractItemModel::sort () from /usr/lib/libQtGui.so.4
#12 0xb6c02658 in QTreeView::qt_metacall () from /usr/lib/libQtGui.so.4
#13 0x081605b2 in ?? ()
#14 0xb7c4a3dc in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#15 0xb7c4ab05 in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#16 0xb7c88505 in QAbstractItemModel::rowsInserted ()
from /usr/lib/libQtCore.so.4
#17 0xb7c2c98a in QAbstractItemModel::endInsertRows ()
from /usr/lib/libQtCore.so.4
#18 0x0815bcad in ?? ()
#19 0x0815cbfd in ?? ()
#20 0x0815e012 in ?? ()
#21 0xb7c4a3dc in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#22 0xb7c4ab05 in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#23 0xb7c88505 in QAbstractItemModel::rowsInserted ()
from /usr/lib/libQtCore.so.4
#24 0xb7c2c98a in QAbstractItemModel::endInsertRows ()
from /usr/lib/libQtCore.so.4
#25 0xb72e8b5d in QAbstractItemModel::sort () from /opt/kde4/lib/libkio.so.5
#26 0xb72eac3f in KDirModel::qt_metacall () from /opt/kde4/lib/libkio.so.5
#27 0xb7c4a3dc in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#28 0xb7c4ab05 in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#29 0xb72ca345 in KDirLister::newItems () from /opt/kde4/lib/libkio.so.5
#30 0xb72cb469 in KDirLister::Private::emitItems ()
from /opt/kde4/lib/libkio.so.5
#31 0xb72df442 in QAbstractItemModel::sort () from /opt/kde4/lib/libkio.so.5
#32 0xb72e28fe in QAbstractItemModel::sort () from /opt/kde4/lib/libkio.so.5
#33 0xb7c4a3dc in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#34 0xb7c4ab05 in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#35 0xb7946b85 in KJob::result () from /opt/kde4/lib/libkdecore.so.5
#36 0xb79475e2 in KJob::emitResult () from /opt/kde4/lib/libkdecore.so.5
#37 0xb72a0647 in KIO::SimpleJob::slotFinished ()
from /opt/kde4/lib/libkio.so.5
#38 0xb72a1dd1 in KIO::ListJob::slotFinished () from /opt/kde4/lib/libkio.so.5
#39 0xb72ac866 in KIO::ListJob::qt_metacall () from /opt/kde4/lib/libkio.so.5
#40 0xb7c4a3dc in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#41 0xb7c4ab05 in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#42 0xb73800e5 in KIO::SlaveInterface::finished ()
from /opt/kde4/lib/libkio.so.5
#43 0xb73842ed in KIO::SlaveInterface::dispatch ()
from /opt/kde4/lib/libkio.so.5
#44 0xb73808e0 in KIO::SlaveInterface::dispatch ()
from /opt/kde4/lib/libkio.so.5
#45 0xb736df36 in KIO::Slave::gotInput () from /opt/kde4/lib/libkio.so.5
#46 0xb736ed01 in KIO::Slave::qt_metacall () from /opt/kde4/lib/libkio.so.5
#47 0xb7c4a3dc in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#48 0xb7c4ab05 in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#49 0xb7262955 in KIO::Connection::readyRead () from /opt/kde4/lib/libkio.so.5
#50 0xb7264e80 in QAbstractItemModel::sort () from /opt/kde4/lib/libkio.so.5
#51 0xb7264f3c in KIO::Connection::qt_metacall ()
from /opt/kde4/lib/libkio.so.5
#52 0xb7c43aea in QMetaCallEvent::placeMetaCall ()
from /usr/lib/libQtCore.so.4
#53 0xb7c4619c in QObject::event () from /usr/lib/libQtCore.so.4
#54 0xb66d4651 in QApplicationPrivate::notify_helper ()
from /usr/lib/libQtGui.so.4
#55 0xb66d83e9 in QApplication::notify () from /usr/lib/libQtGui.so.4
#56 0xb767c011 in KApplication::notify () from /opt/kde4/lib/libkdeui.so.5
#57 0xb7c34d25 in QCoreApplication::notifyInternal ()
from /usr/lib/libQtCore.so.4
#58 0xb7c35eec in QCoreApplicationPrivate::sendPostedEvents ()
from /usr/lib/libQtCore.so.4
#59 0xb7c3614c in QCoreApplication::sendPostedEvents ()
from /usr/lib/libQtCore.so.4
#60 0xb7c6179d in QAbstractItemModel::sort () from /usr/lib/libQtCore.so.4
#61 0xb5a3da30 in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0
#62 0xb5a40d05 in QAbstractItemModel::sort () from /usr/lib/libglib-2.0.so.0
#63 0xb5a41218 in g_main_context_iteration () from /usr/lib/libglib-2.0.so.0
#64 0xb7c61c3a in QEventDispatcherGlib::processEvents ()
from /usr/lib/libQtCore.so.4
#65 0xb676a8aa in QAbstractItemModel::sort () from /usr/lib/libQtGui.so.4
#66 0xb7c33fe1 in QEventLoop::processEvents () from /usr/lib/libQtCore.so.4
#67 0xb7c34169 in QEventLoop::exec () from /usr/lib/libQtCore.so.4
#68 0xb7c3621e in QCoreApplication::exec () from /usr/lib/libQtCore.so.4
#69 0xb66d3d94 in QApplication::exec () from /usr/lib/libQtGui.so.4
#70 0x0816f56e in ?? ()
#71 0xb5ae8390 in __libc_start_main () from /lib/i686/libc.so.6
#72 0x0807c451 in _start ()
#0 0xffffe410 in __kernel_vsyscall ()

--
Configure bugmail: http://bugs.kde.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

RE: console mode text cursor with graphics cursor?

2008-07-28T10:29:27Z

Uli:
Fantastic. That did it!
I added ioctl(0, 0x4b3a,0x1) to the initDevice function as you suggested
(not sure which device is being used, because /dev/fb0 is opened, and you
can't use that), and I no longer get the text mode problems (as an added
bonus, the text mode debugging messages don't show up on the screen).

Thanks!
Dan

> -----Original Message-----
> From: Uli Luckas [mailto:u.luckas@...]
> Sent: Monday, July 28, 2008 11:56 AM
> To: konq-e@...
> Cc: Dan Grunberg
> Subject: Re: console mode text cursor with graphics cursor?
>
> On Monday, 28. July 2008, Dan Grunberg wrote:
> > I have compiled Qt3 and Kong/E to run without X-windows (conf below).
> >
> > When I run the executable, I get a browser and cursor that look mostly
> OK -
> > the problem is I also get a text-mode cursor that moves around in sync
> with
> >
> > the graphics cursor and overwrites the browser with text-size blocks.
> It
> > looks like I have to disable text-mode or console-output somehow. I
> boot
> > linux with vga=0x307 on the kernel line with grub.
> >
> The vga mode should not matter here.
>
> > The browser actually seems to work (I can visit different sites) - the
> main
> > problem is the overwriting the screen with a text mode cursor.
> >
> >
> I don't know for sure about Qt3 but Qt2 fails to switch the console to
> graphics mode. Maybe a call like this in Qt3's equivalent to
> QLinuxFbScreen::initDevice() can cure your problems:
> ioctl(tty, KDSETMODE, KD_GRAPHICS);
>
> On shutdown (QLinuxFbScreen::shutdownDevice() for Qt2) you should switch
> the
> mode back to a saved value or just to KD_TEXT.
>
> regards,
> Uli
>
> --
>
> ------- ROAD ...the handyPC Company - - - ) ) )
>
> Uli Luckas
> Software Development
>
> ROAD GmbH
> Bennigsenstr. 14 | 12159 Berlin | Germany
> fon: +49 (30) 230069 - 64 | fax: +49 (30) 230069 - 69
> url: www.road.de
>
> Amtsgericht Charlottenburg: HRB 96688 B
> Managing directors: Hans-Peter Constien, Hubertus von Streit

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

Re: console mode text cursor with graphics cursor?

2008-07-28T08:56:09Z

On Monday, 28. July 2008, Dan Grunberg wrote:
> I have compiled Qt3 and Kong/E to run without X-windows (conf below).
>
> When I run the executable, I get a browser and cursor that look mostly OK -
> the problem is I also get a text-mode cursor that moves around in sync with
>
> the graphics cursor and overwrites the browser with text-size blocks. It
> looks like I have to disable text-mode or console-output somehow. I boot
> linux with vga=0x307 on the kernel line with grub.
>
The vga mode should not matter here.

> The browser actually seems to work (I can visit different sites) - the main
> problem is the overwriting the screen with a text mode cursor.
>
>
I don't know for sure about Qt3 but Qt2 fails to switch the console to
graphics mode. Maybe a call like this in Qt3's equivalent to
QLinuxFbScreen::initDevice() can cure your problems:
ioctl(tty, KDSETMODE, KD_GRAPHICS);

On shutdown (QLinuxFbScreen::shutdownDevice() for Qt2) you should switch the
mode back to a saved value or just to KD_TEXT.

regards,
Uli

--

------- ROAD ...the handyPC Company - - - ) ) )

Uli Luckas
Software Development

ROAD GmbH
Bennigsenstr. 14 | 12159 Berlin | Germany
fon: +49 (30) 230069 - 64 | fax: +49 (30) 230069 - 69
url: www.road.de

Amtsgericht Charlottenburg: HRB 96688 B
Managing directors: Hans-Peter Constien, Hubertus von Streit
_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

console mode text cursor with graphics cursor?

2008-07-28T08:33:58Z

I have compiled Qt3 and Kong/E to run without X-windows (conf below).

When I run the executable, I get a browser and cursor that look mostly OK – the problem is I also get a text-mode cursor that moves around in sync with

the graphics cursor and overwrites the browser with text-size blocks. It looks like I have to disable text-mode or console-output somehow. I boot linux with vga=0x307 on the kernel line with grub.

The browser actually seems to work (I can visit different sites) – the main problem is the overwriting the screen with a text mode cursor.

Does anyone have any ideas on how to fix this?

Thanks,

Dan Grunberg

Qt configuration (qt-embedded-free-3.3.8b.tar.gz):

export QTDIR=~/qt-3.3.8

export LD_LIBRARY_PATH=~/qt-3.3.8/lib

./configure -release -qt-gif -no-cups -no-stl -enable-rttimake –thread

Konq/E configuration (kdenox_snapshot_Qt3_2007.02.12.tar.bz2)

BOOK=--disable-bookmarks

./configure \

--host=i686-pc-linux-gnu \

--build=i686-pc-linux-gnu \

--target=i686-pc-linux-gnu \

--enable-embedded \

--enable-qt-embedded \

--enable-static \

--enable-mt \

--enable-ftp \

--with-qt-dir=$QTE_BASE/ \

--with-qt-libraries=$QTE_BASE/lib \

--with-qt-includes=$QTE_BASE/include \

--with-gui=x11 \

--enable-rtti-embedded \

--enable-fullscreenmenu \

--enable-scrollbars \

--disable-selection \

$BOOK \

--with-javascript=static \

--enable-debug=yes \

--disable-printing \

--enable-pcre \

--without-arts \

--enable-jshostext

Daniel Grunberg

Immedia Semiconductor, Inc.

Wilmington, MA 01810

(781) 820-0525

dangrunberg@...

Visit the MIT Museum: http://web.mit.edu/museum

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

console mode text cursor with graphics cursor?

2008-07-28T08:27:11Z

I have compiled Qt3 and Kong/E to run without X-windows (conf below).

When I run the executable, I get a browser and cursor that look mostly OK – the problem is I also get a text-mode cursor that moves around in sync with

the graphics cursor and overwrites the browser with text-size blocks. It looks like I have to disable text-mode or console-output somehow. I boot linux with vga=0x307 on the kernel line with grub.

The browser actually seems to work (I can visit different sites) – the main problem is the overwriting the screen with a text mode cursor.

Does anyone have any ideas on how to fix this?

Thanks,

Dan Grunberg

Qt configuration (qt-embedded-free-3.3.8b.tar.gz):

export QTDIR=~/qt-3.3.8

export LD_LIBRARY_PATH=~/qt-3.3.8/lib

./configure -release -qt-gif -no-cups -no-stl -enable-rttimake –thread

Konq/E configuration (kdenox_snapshot_Qt3_2007.02.12.tar.bz2)

BOOK=--disable-bookmarks

./configure \

--host=i686-pc-linux-gnu \

--build=i686-pc-linux-gnu \

--target=i686-pc-linux-gnu \

--enable-embedded \

--enable-qt-embedded \

--enable-static \

--enable-mt \

--enable-ftp \

--with-qt-dir=$QTE_BASE/ \

--with-qt-libraries=$QTE_BASE/lib \

--with-qt-includes=$QTE_BASE/include \

--with-gui=x11 \

--enable-rtti-embedded \

--enable-fullscreenmenu \

--enable-scrollbars \

--disable-selection \

$BOOK \

--with-javascript=static \

--enable-debug=yes \

--disable-printing \

--enable-pcre \

--without-arts \

--enable-jshostext

Daniel Grunberg

Immedia Semiconductor, Inc.

Wilmington, MA 01810

(781) 820-0525

dangrunberg@...

Visit the MIT Museum: http://web.mit.edu/museum

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

EWB for powerpc linux(debian)

2008-07-17T10:24:57Z

Hi,

I have been searching here and there for a feasible option of an embedded web browser which can be integrated with my embedded printer device.

At last I have switched to Konqueror Embedded, I need to do the following for my product.

1)Get the source and build it for powerpc linux with frame buffer support(not X). My product doesnt have any X Server running in it. Its frame buffer based. So I need to compile the product for framebuffer support instead of QT and stuff like that.

2)Tweak the source to point the browser output bytes to my device frame buffer

3)Tweak the source to capture the touch panel/touch key events and call the appropriate system methods.

Any input/similar experiment documents on the above said points are most welcome.

Where can I start with? I have tried n number of other stuff and because of the rigidity in configuring them, I gave up. Hope Konqueror E is fortunate enough to be included in my product :-D

Thanks in advance

DSS

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e

Compile error for kdenox-snapshot-qt2-kdelibs359

2008-07-17T00:13:00Z

Hello, everyone

I compiled qtopia-free-2.2.0 successfully with following configure and make commands:

./configure

make

make install

And after that, qtopia was compiled in /root/qtopia-free-2.2.0, and was installed into /root/qtopia-free-2.2.0/qtopia/image/opt/Qtopia.

Then I began to compile kdenox-snapshot-qt2-kdelibs359 based on qtopia-free-2.2.0. As what said in http://www.basyskom.de/index.pl/konqe, I configure like this:

export QTE_BASE=/root/qtopia-free-2.2.0

export PATH=$QTE_BASE/qt2/bin:$QTE_BASE/qtopia/bin:$QTE_BASE/dqt/bin:$PATH

export LD_LIBRARY_PATH=$QTE_BASE/qt2/lib:$QTE_BASE/qtopia/lib:$QTE_BASE/dqt/lib:$LD_LIBRARY_PATH

./configure --prefix=$HOME/konq-embedded

--host=i686-linux

--with-ipv6-lookup=no

--without-xinerama

--enable-scrollbars

--disable-selection

--enable-bookmarks

--with-javascript=static

--enable-debug=full

--disable-printing

--enable-pcre

--without-arts

--enable-jshostext

--enable-final

--enable-qt-embedded

--with-extra-includes=$QTE_BASE/qtopia/include

--with-extra-libs=$QTE_BASE/qtopia/lib

--with-qt-dir=$QTE_BASE/qtopia

--with-qt-libraries=$QTE_BASE/qtopia/lib

--with-qt-includes=$QTE_BASE/qt2/include

--enable-fwnewepg=yes

--enable-embedded

--with-qtopia-dir=$QTE_BASE/qtopia

--enable-qtopia

--enable-qpe

--with-gui=road

--enable-rtti-embedded

--enable-ftp

--enable-fullscreenmenu

But when I make, I always get the following errors:

============================================

make[4]: Entering directory `/root/workspace/konq-e-kdelibs-3.5.9/konq-embed/dropin'

if /bin/sh ../../libtool --silent --tag=CXX --mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I../../konq-embed/kdesrc/kdecore -I../../konq-embed/kdesrc/kjs -I../../konq-embed/kdesrc/kssl -I../../konq-embed/kdesrc -I../../konq-embed/kdesrc/kdecore -I../../konq-embed/kdesrc/kio/kfile -I../.. -I../../konq-embed/kdesrc -I/root/workspace/qtopia-free-2.2.0-rtti/qtopia/include -I/root/konq-embedded/include -I/root/workspace/qtopia-free-2.2.0-rtti/qt2/include -I/root/workspace/qtopia-free-2.2.0-rtti/qtopia/include -DQWS -D_REENTRANT -Wno-long-long -Wundef -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -Wall -W -Wpointer-arith -fno-builtin -g3 -fno-inline -Wformat-security -Wmissing-format-attribute -Wno-non-virtual-dtor -fno-exceptions -fno-check-new -fno-common -D_QT_QPE_ -DQT_CLEAN_NAMESPACE -DQT_NO_COMPAT -DQT_NO_ASCII_CAST -MT libdropin_la.all_cpp.lo -MD -MP -MF ".deps/libdropin_la.all_cpp.Tpo" -c -o libdropin_la.all_cpp.lo libdropin_la.all_cpp.cpp; \

then mv -f ".deps/libdropin_la.all_cpp.Tpo" ".deps/libdropin_la.all_cpp.Plo"; else rm -f ".deps/libdropin_la.all_cpp.Tpo"; exit 1; fi

In file included from kfiledialog.cpp:207,

from libdropin_la.all_cpp.cpp:3:

kfiledialog.moc:15:34: error: private/qucomextra_p.h: No such file or directory

kfiledialog.moc:17:2: error: #error "This file was generated using the moc from 3.3.7. It"

kfiledialog.moc:18:2: error: #error "cannot be used with the include files from this version of Qt."

kfiledialog.moc:19:2: error: #error "(The moc has changed too much.)"

In file included from kmessagebox.cpp:143,

from libdropin_la.all_cpp.cpp:4:

kmessagebox.moc:17:2: error: #error "This file was generated using the moc from 3.3.7. It"

kmessagebox.moc:18:2: error: #error "cannot be used with the include files from this version of Qt."

kmessagebox.moc:19:2: error: #error "(The moc has changed too much.)"

In file included from kapplication.cpp:179,

from libdropin_la.all_cpp.cpp:10:

kapplication.moc:17:2: error: #error "This file was generated using the moc from 3.3.7. It"

kapplication.moc:18:2: error: #error "cannot be used with the include files from this version of Qt."

kapplication.moc:19:2: error: #error "(The moc has changed too much.)"

In file included from dcopobject.cpp:70,

from libdropin_la.all_cpp.cpp:11:

dcopobject.moc:17:2: error: #error "This file was generated using the moc from 3.3.7. It"

dcopobject.moc:18:2: error: #error "cannot be used with the include files from this version of Qt."

dcopobject.moc:19:2: error: #error "(The moc has changed too much.)"

In file included from kdialogbase.cpp:82,

from libdropin_la.all_cpp.cpp:14:

kdialogbase.moc:17:2: error: #error "This file was generated using the moc from 3.3.7. It"

kdialogbase.moc:18:2: error: #error "cannot be used with the include files from this version of Qt."

kdialogbase.moc:19:2: error: #error "(The moc has changed too much.)"

In file included from kuniqueapplication.cpp:2,

from libdropin_la.all_cpp.cpp:15:

kuniqueapplication.moc:17:2: error: #error "This file was generated using the moc from 3.3.7. It"

kuniqueapplication.moc:18:2: error: #error "cannot be used with the include files from this version of Qt."

kuniqueapplication.moc:19:2: error: #error "(The moc has changed too much.)"

In file included from kdialog.cpp:31,

from libdropin_la.all_cpp.cpp:16:

kdialog.moc:17:2: error: #error "This file was generated using the moc from 3.3.7. It"

kdialog.moc:18:2: error: #error "cannot be used with the include files from this version of Qt."

kdialog.moc:19:2: error: #error "(The moc has changed too much.)"

In file included from klibloader.cpp:211,

from libdropin_la.all_cpp.cpp:18:

klibloader.moc:17:2: error: #error "This file was generated using the moc from 3.3.7. It"

klibloader.moc:18:2: error: #error "cannot be used with the include files from this version of Qt."

klibloader.moc:19:2: error: #error "(The moc has changed too much.)"

...........

==========================================

Could anyone else give me some hints? Thanks!

2008-07-17

Best Regards!

Tony

_______________________________________________
konq-e mailing list
konq-e@...
https://mail.kde.org/mailman/listinfo/konq-e