The reason for multiple posts and the titles is because The original post was considered spam by the freebsd-questions mailing list and webmaster. It had all of the relevant information in it.
Next time you may want ask me why I do something before making an uninformed and asinine response.
Here is the information you asked for: %uname -a
FreeBSD pocket-peoples.xxx.xxx.xxx.xxx 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009
root@...:/usr/obj/usr/src/sys/GENERIC i386
--- On Wed, 11/4/09, Daniel C. Dowse <
dcdowse@...> wrote:
From: Daniel C. Dowse <
dcdowse@...>
Subject: Re: need help with nvidia drivers
To: "Super Biscuit" <
super_bisquit@...>
Cc:
freebsd-questions@...
Date: Wednesday, November 4, 2009, 9:52 AM
On Tue, 3 Nov 2009 13:55:34 -0800 (PST)
Super Biscuit <
super_bisquit@...> wrote:
> I'm not able to use the glx settings on my computer.
> RGB comes back as a double buffer error.
>
Hi,
sorry but with that kind of questioning you won`t get any response,
that includes your other posts as well.
you should all ways try to describe the problem more specified.
you should post your configs (/etc./X11/xorg.conf) and hardware specs
(dmesg) and os release version( uname -a ) ,and the driver version
you have installed, too.
>
>
>
> _______________________________________________
>
freebsd-questions@... mailing list
>
http://lists.freebsd.org/mailman/listinfo/freebsd-questions> To unsubscribe, send any mail to "
freebsd-questions-unsubscribe@..."
greets
daniel
--
[ The only reality is virtual ]
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009
root@...:/usr/obj/usr/src/sys/GENERIC
module_register: module dc/miibus already exists!
Module dc/miibus failed to register: 17
module_register: module pci/dc already exists!
Module pci/dc failed to register: 17
module_register: module cardbus/dc already exists!
Module cardbus/dc failed to register: 17
module_register: module miibus/dcphy already exists!
Module miibus/dcphy failed to register: 17
module_register: module miibus/pnphy already exists!
Module miibus/pnphy failed to register: 17
module_register: module uhub/ums already exists!
Module uhub/ums failed to register: 17
module_register: module rl/miibus already exists!
Module rl/miibus failed to register: 17
module_register: module cardbus/rl already exists!
Module cardbus/rl failed to register: 17
module_register: module pci/rl already exists!
Module pci/rl failed to register: 17
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Sempron(tm) Processor 3400+ (1989.82-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20ff2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x1<LAHF>
real memory = 1877934080 (1790 MB)
avail memory = 1818591232 (1734 MB)
ACPI APIC Table: <HP-CPC AWRDACPI>
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HP-CPC AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 6fdf0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xef00-0xef7f mem 0xfa000000-0xfaffffff,0xd0000000-0xdfffffff,0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci1
nvidia0: <GeForce 8400 GS> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
atapci0: <ATI IXP400 SATA150 controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f1ff irq 22 at device 18.0 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ohci0: <ATI SB400 USB Controller> mem 0xfe02e000-0xfe02efff at device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> mem 0xfe02d000-0xfe02dfff at device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 4 ports with 4 removable, self powered
ehci0: <ATI SB400 USB 2.0 controller> mem 0xfe02c000-0xfe02cfff at device 19.2 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <ATI SB400 USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 8 ports with 8 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
ata1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xda00-0xdaff mem 0xfddff000-0xfddff0ff irq 21 at device 3.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:15:f2:7a:dc:83
rl0: [ITHREAD]
fwohci0: <VIA Fire II (VT6306)> port 0xdf00-0xdf7f mem 0xfddfe000-0xfddfe7ff at device 5.0 on pci2
fwohci0: [FILTER]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:d8:00:00:85:04:0b
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:11:d8:85:04:0b
fwe0: Ethernet address: 02:11:d8:85:04:0b
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:11:d8:00:00:85:04:0b @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1adc000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
emu10kx0: <Creative SBLive! [CT4760]> port 0xde00-0xde1f irq 16 at device 8.0 on pci2
emu10kx0: [ITHREAD]
pcm0: <EMU10Kx DSP front PCM interface> on emu10kx0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
pcm1: <EMU10Kx DSP rear PCM interface> on emu10kx0
dc0: <ADMtek AN985 10/100BaseTX> port 0xd800-0xd8ff mem 0xfddfd000-0xfddfd3ff irq 17 at device 9.0 on pci2
miibus1: <MII bus> on dc0
acphy0: <ACXXX 10/100 media interface> PHY 1 on miibus1
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: Ethernet address: 00:04:5a:4f:ab:db
dc0: [ITHREAD]
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <Cool`n'Quiet K8> on cpu0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcc7ff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
plip0: <PLIP network interface> on ppbus0
plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
umass0: <vendor 0x058f USB Reader, class 0/0, rev 1.10/1.00, addr 2> on uhub0
Timecounter "TSC" frequency 1989824981 Hz quality 800
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acd0: CDRW <LITE-ON COMBO SOHC-4836K/SPJ2> at ata1-master UDMA33
ad4: 95396MB <Maxtor 6L100M0 BACE1G10> at ata2-master SATA150
GEOM_LABEL: Label for provider ad4s1a is ufsid/4ae6f122c8d5fbde.
GEOM_LABEL: Label for provider ad4s1d is ufsid/4ae6f1235071c123.
GEOM_LABEL: Label for provider ad4s1e is ufsid/4ae6f125b3b4ea41.
GEOM_LABEL: Label for provider ad4s1f is ufsid/4ae6f1228fd52d52.
GEOM_LABEL: Label for provider ad4s1g is ufsid/4ae6f12375b5629b.
(probe7:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe7:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe7:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe7:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
(probe7:umass-sim0:0:0:0): Medium not present
(probe7:umass-sim0:0:0:0): Unretryable error
(probe7:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
(probe7:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(probe7:umass-sim0:0:0:1): SCSI Status: Check Condition
(probe7:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
(probe7:umass-sim0:0:0:1): Medium not present
(probe7:umass-sim0:0:0:1): Unretryable error
(probe7:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0
(probe7:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(probe7:umass-sim0:0:0:2): SCSI Status: Check Condition
(probe7:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
(probe7:umass-sim0:0:0:2): Medium not present
(probe7:umass-sim0:0:0:2): Unretryable error
(probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0
(probe0:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:3): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
(probe0:umass-sim0:0:0:3): Medium not present
(probe0:umass-sim0:0:0:3): Unretryable error
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
da2: 1.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
da3: 1.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a
GEOM_LABEL: Label ufsid/4ae6f122c8d5fbde removed.
GEOM_LABEL: Label for provider ad4s1a is ufsid/4ae6f122c8d5fbde.
GEOM_LABEL: Label ufsid/4ae6f1228fd52d52 removed.
GEOM_LABEL: Label for provider ad4s1f is ufsid/4ae6f1228fd52d52.
GEOM_LABEL: Label ufsid/4ae6f1235071c123 removed.
GEOM_LABEL: Label for provider ad4s1d is ufsid/4ae6f1235071c123.
GEOM_LABEL: Label ufsid/4ae6f12375b5629b removed.
GEOM_LABEL: Label for provider ad4s1g is ufsid/4ae6f12375b5629b.
GEOM_LABEL: Label ufsid/4ae6f125b3b4ea41 removed.
GEOM_LABEL: Label for provider ad4s1e is ufsid/4ae6f125b3b4ea41.
GEOM_LABEL: Label ufsid/4ae6f122c8d5fbde removed.
GEOM_LABEL: Label ufsid/4ae6f1228fd52d52 removed.
GEOM_LABEL: Label ufsid/4ae6f1235071c123 removed.
GEOM_LABEL: Label ufsid/4ae6f12375b5629b removed.
GEOM_LABEL: Label ufsid/4ae6f125b3b4ea41 removed.
_______________________________________________
freebsd-questions@... mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questionsTo unsubscribe, send any mail to "
freebsd-questions-unsubscribe@..."
xorg.conf (3K) 