patch to set rtp proxy mode via radius
|
View:
New views
2 Messages
—
Rating Filter:
Alert me
|
 |
patch to set rtp proxy mode via radius
by Georgiewskiy Yuriy-2
::
Rate this Message:
Hi again, there is a patch to set rtp proxy mode in radius Access-Accept reply packet via cisco VSA attribute h323-ivr-in proxy variable. diff -ruN openh323gk/docs/radauth.txt openh323gk-new/docs/radauth.txt --- openh323gk/docs/radauth.txt 2005-02-05 00:00:00.000000000 +0300 +++ openh323gk-new/docs/radauth.txt 2009-10-16 19:40:11.000000000 +0400 @@ -278,6 +278,18 @@ If present, a call is sent to the IP address present in this attribute. + VSA: VendorId=Cisco, Cisco-AVPair, h323-ivr-in + + If present, it is scanned for 'proxy' variable that can contain + 'yes' or 'no' for enabling/disabling RTP proxy. + The format of this attribute is as follows: + + Cisco-AVPair = "h323-ivr-in=variable:value;[variable:value;]" + + where the "variable" can be "proxy": + + Cisco-AVPair = "h323-ivr-in=proxy:<yes|no>;" + If both Session-Timeout and h323-credit-time are present, a lesser value is taken. diff -ruN openh323gk/radauth.cxx openh323gk-new/radauth.cxx --- openh323gk/radauth.cxx 2009-05-25 09:10:00.000000000 +0400 +++ openh323gk-new/radauth.cxx 2009-10-16 19:40:11.000000000 +0400 @@ -903,7 +903,36 @@ } } } - + + // process h323-ivr-in=proxy attribute + if (result) { + attr = response->FindVsaAttr(RadiusAttr::CiscoVendorId, + RadiusAttr::CiscoVSA_AV_Pair + ); + while (attr != NULL) { + PINDEX index; + value = attr->AsCiscoString(); + if (value.Find("h323-ivr-in=") == 0 + && ((index = value.Find("proxy:")) != P_MAX_INDEX)) { + index += strlen("proxy:"); + const PINDEX semicolonpos = value.Find(';', index); + value = value.Mid(index, semicolonpos == P_MAX_INDEX + ? P_MAX_INDEX : (semicolonpos-index) + ); + if (!value) { + authData.m_proxyMode = Toolkit::AsBool(value) + ? CallRec::ProxyEnabled : CallRec::ProxyDisabled; + PTRACE(5, "RADAUTH\t" << GetName() << " - proxy mode " + << (authData.m_proxyMode == CallRec::ProxyEnabled ? "enabled" : "disabled") + ); + } + } + attr = response->FindVsaAttr(RadiusAttr::CiscoVendorId, + RadiusAttr::CiscoVSA_AV_Pair, attr + ); + } + } + if (result) result = OnReceivedPDU(*response, arqPdu, authData); else @@ -1192,6 +1221,36 @@ } } + + // process h323-ivr-in=proxy attribute + if (result) { + attr = response->FindVsaAttr(RadiusAttr::CiscoVendorId, + RadiusAttr::CiscoVSA_AV_Pair + ); + while (attr != NULL) { + PINDEX index; + value = attr->AsCiscoString(); + if (value.Find("h323-ivr-in=") == 0 + && ((index = value.Find("proxy:")) != P_MAX_INDEX)) { + index += strlen("proxy:"); + const PINDEX semicolonpos = value.Find(';', index); + value = value.Mid(index, semicolonpos == P_MAX_INDEX + ? P_MAX_INDEX : (semicolonpos-index) + ); + if (!value) { + authData.m_proxyMode = Toolkit::AsBool(value) + ? CallRec::ProxyEnabled : CallRec::ProxyDisabled; + PTRACE(5, "RADAUTH\t" << GetName() << " - proxy mode " + << (authData.m_proxyMode == CallRec::ProxyEnabled ? "enabled" : "disabled") + ); + } + } + attr = response->FindVsaAttr(RadiusAttr::CiscoVendorId, + RadiusAttr::CiscoVSA_AV_Pair, attr + ); + } + } + if (result) result = OnReceivedPDU(*response, setup, authData); else C уважением With Best Regards Георгиевский Юрий. Georgiewskiy Yuriy +7 4872 711666 +7 4872 711666 факс +7 4872 711143 fax +7 4872 711143 Компания ООО "Ай Ти Сервис" IT Service Ltd http://nkoort.ru http://nkoort.ru JID: GHhost@... JID: GHhost@... YG129-RIPE YG129-RIPE ------------------------------------------------------------------------------ Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference _______________________________________________________ Posting: mailto:Openh323gk-users@... Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/ |
|
|
Re: patch to set rtp proxy mode via radius
by Willamowius
::
Rate this Message:
Patch applied. Thanks!
Georgiewskiy Yuriy wrote: > > Hi again, there is a patch to set rtp proxy mode in radius Access-Accept reply packet via > cisco VSA attribute h323-ivr-in proxy variable. > > diff -ruN openh323gk/docs/radauth.txt openh323gk-new/docs/radauth.txt > --- openh323gk/docs/radauth.txt 2005-02-05 00:00:00.000000000 +0300 > +++ openh323gk-new/docs/radauth.txt 2009-10-16 19:40:11.000000000 +0400 > @@ -278,6 +278,18 @@ > > If present, a call is sent to the IP address present in this attribute. > > + VSA: VendorId=Cisco, Cisco-AVPair, h323-ivr-in > + > + If present, it is scanned for 'proxy' variable that can contain > + 'yes' or 'no' for enabling/disabling RTP proxy. > + The format of this attribute is as follows: > + > + Cisco-AVPair = "h323-ivr-in=variable:value;[variable:value;]" > + > + where the "variable" can be "proxy": > + > + Cisco-AVPair = "h323-ivr-in=proxy:<yes|no>;" > + > If both Session-Timeout and h323-credit-time are present, a lesser value > is taken. > > diff -ruN openh323gk/radauth.cxx openh323gk-new/radauth.cxx > --- openh323gk/radauth.cxx 2009-05-25 09:10:00.000000000 +0400 > +++ openh323gk-new/radauth.cxx 2009-10-16 19:40:11.000000000 +0400 > @@ -903,7 +903,36 @@ > } > } > } > - > + > + // process h323-ivr-in=proxy attribute > + if (result) { > + attr = response->FindVsaAttr(RadiusAttr::CiscoVendorId, > + RadiusAttr::CiscoVSA_AV_Pair > + ); > + while (attr != NULL) { > + PINDEX index; > + value = attr->AsCiscoString(); > + if (value.Find("h323-ivr-in=") == 0 > + && ((index = value.Find("proxy:")) != P_MAX_INDEX)) { > + index += strlen("proxy:"); > + const PINDEX semicolonpos = value.Find(';', index); > + value = value.Mid(index, semicolonpos == P_MAX_INDEX > + ? P_MAX_INDEX : (semicolonpos-index) > + ); > + if (!value) { > + authData.m_proxyMode = Toolkit::AsBool(value) > + ? CallRec::ProxyEnabled : CallRec::ProxyDisabled; > + PTRACE(5, "RADAUTH\t" << GetName() << " - proxy mode " > + << (authData.m_proxyMode == CallRec::ProxyEnabled ? "enabled" : "disabled") > + ); > + } > + } > + attr = response->FindVsaAttr(RadiusAttr::CiscoVendorId, > + RadiusAttr::CiscoVSA_AV_Pair, attr > + ); > + } > + } > + > if (result) > result = OnReceivedPDU(*response, arqPdu, authData); > else > @@ -1192,6 +1221,36 @@ > } > } > > + > + // process h323-ivr-in=proxy attribute > + if (result) { > + attr = response->FindVsaAttr(RadiusAttr::CiscoVendorId, > + RadiusAttr::CiscoVSA_AV_Pair > + ); > + while (attr != NULL) { > + PINDEX index; > + value = attr->AsCiscoString(); > + if (value.Find("h323-ivr-in=") == 0 > + && ((index = value.Find("proxy:")) != P_MAX_INDEX)) { > + index += strlen("proxy:"); > + const PINDEX semicolonpos = value.Find(';', index); > + value = value.Mid(index, semicolonpos == P_MAX_INDEX > + ? P_MAX_INDEX : (semicolonpos-index) > + ); > + if (!value) { > + authData.m_proxyMode = Toolkit::AsBool(value) > + ? CallRec::ProxyEnabled : CallRec::ProxyDisabled; > + PTRACE(5, "RADAUTH\t" << GetName() << " - proxy mode " > + << (authData.m_proxyMode == CallRec::ProxyEnabled ? "enabled" : "disabled") > + ); > + } > + } > + attr = response->FindVsaAttr(RadiusAttr::CiscoVendorId, > + RadiusAttr::CiscoVSA_AV_Pair, attr > + ); > + } > + } > + > if (result) > result = OnReceivedPDU(*response, setup, authData); > else > > > C уважением With Best Regards > Георгиевский Юрий. Georgiewskiy Yuriy > +7 4872 711666 +7 4872 711666 > факс +7 4872 711143 fax +7 4872 711143 > Компания ООО "Ай Ти Сервис" IT Service Ltd > http://nkoort.ru http://nkoort.ru > JID: GHhost@... JID: GHhost@... > YG129-RIPE YG129-RIPE -- Jan Willamowius, jan@..., http://www.gnugk.org/ ------------------------------------------------------------------------------ Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference _______________________________________________________ Posting: mailto:Openh323gk-users@... Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/ |
| Free embeddable forum powered by Nabble | Forum Help |
