radeon9200

sorry if this is off-topic.. i'd like to know if i can get my radeon
9200 pci to run xorg and blender on openbsd for ppc.. i had an nvidia
card beforehand, where xorg worked quite well, but not glx, so i opted
for a radeon instead, which was not cheap.

this card is supposed to be supported by xorg, but suprisingly, it
hasn't worked for me yet

all i want to do (for now) is get X and blender running, so i can get back work

all help will be tremendously appreciated.

thanks,

-carlos






here's my Xorg.0.log


X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: OpenBSD 4.2 macppc
Current Operating System: OpenBSD foo.bar 4.2 GENERIC#1517 macppc
Build Date: 08 August 2007
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 20 01:27:39 2007
(II) Loader magic: 0x19b3d30
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.3
        X.Org Video Driver: 1.1
        X.Org XInput driver : 0.7
        X.Org Server Extension : 0.3
        X.Org Font Renderer : 0.5
(II) Loader running on openbsd
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 1.0.0
        ABI class: X.Org Video Driver, version 1.1
(--) Using wscons driver
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 106b,002d card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:11:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
        [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
        [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
List of video drivers:
        ati
        atimisc
        nv
        r128
        radeon
        wsfb
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 6.6.3
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers//atimisc_drv.so
(II) Module atimisc: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 6.6.3
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "nv"
(II) Loading /usr/X11R6/lib/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 2.0.2
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "r128"
(II) Loading /usr/X11R6/lib/modules/drivers//r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 4.1.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 4.2.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "wsfb"
(II) Loading /usr/X11R6/lib/modules/drivers//wsfb_drv.so
(II) Module wsfb: vendor="X.Org Foundation"
        compiled for 7.2.0, module version = 0.2.1
        ABI class: X.Org Video Driver, version 1.1
(II) Addressable bus resource ranges are
        [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
        [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
        [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
No devices to configure.  Configuration failed.




and here's my dmesg

[ using 375776 bytes of bsd ELF symbol table ]
console out [ATY,Bugsy_A]console in [keyboard] USB found
using parent ATY,BugsyParent:: memaddr 90000000 size 10000000, :
consaddr 98008000, : ioaddr 800a0000, size 20000: memtag 9000, iotag
9000: width 1024 linebytes 1024 height 768 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.2 (GENERIC) #1517: Tue Aug 28 10:42:20 MDT 2007
    deraadt@...:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 805306368 (768MB)
avail mem = 769347584 (733MB)
mainbus0 at root: model PowerMac3,4
cpu0 at mainbus0: 7410 (Revision 0x1103): 533 MHz: 1MB backside cache
memc0 at mainbus0: uni-n
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N2 AGP" rev 0x00
mpcpcibr1 at mainbus0 pci: uni-north, Revision 0x6
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Uni-N2 Host" rev 0x00
vgafb0 at pci1 dev 18 function 0 "ATI Radeon 9200 PRO" rev 0x01, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03
openpic0 at macobio0 offset 0x40000: version 0x4614 little endian
macgpio0 at macobio0 offset 0x50
macgpio1 at macgpio0 irq 47
"programmer-switch" at macgpio0 not configured
"gpio5" at macgpio0 not configured
"gpio6" at macgpio0 not configured
"gpio11" at macgpio0 not configured
"extint-gpio15" at macgpio0 not configured
"extint-gpio16" at macgpio0 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,50
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
tumbler0 at macobio0 offset 0x10000: irq 30,1,2
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000 irq 25: via-pmu, 0 targets
apm0 at adb0: battery flags 0x9, 0% charged
kiic1 at macobio0 offset 0x18000
iic1 at kiic1
wdc0 at macobio0 offset 0x1f000 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <Maxtor 6E030L0>
wd0: 16-sector PIO, LBA, 29325MB, 60058656 sectors
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wdc1 at macobio0 offset 0x20000 irq 20: DMA
atapiscsi0 at wdc1 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <DVDRW, IDE H16X, B02H> SCSI0 5/cdrom removable
cd0(wdc1:0:1): using BIOS timings, DMA mode 2
wdc2 at macobio0 offset 0x21000 irq 21: DMA
audio0 at tumbler0
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0: Apple OHCI root hub, rev 1.00/1.00, addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1: Apple OHCI root hub, rev 1.00/1.00, addr 1
mpcpcibr2 at mainbus0 pci: uni-north, Revision 0x16
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Uni-N2 Host" rev 0x00
"AT&T/Lucent FW322 1394" rev 0x00 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N GMAC" rev 0x01: irq 41,
address 00:30:65:f4:13:50
brgphy0 at gem0 phy 0: BCM5401 10/100/1000baseT PHY, rev. 3
uhub2 at uhub0 port 1umass0 at uhub1 port 1 configuration 1 interface
0: Mitsumi Electric Hub in Apple Extended USB Keyboard, rev 1.10/4.10,
addr 2

umass0: Transcend T.sonic 520, rev 2.00/0.02, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <T.sonic, 520, \\001> SCSI0 0/direct removable
sd0: 1994MB, 254 cyl, 255 head, 63 sec, 512 bytes/sec, 4084224 sec total
uhidev0 at uhub2 port 3 configuration 1 interface 0
uhidev0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10,
addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 3 configuration 1 interface 1
uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/4.10,
addr 3, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub2 port 1 configuration 1 interface 0
uhidev2: vendor 0x2222 Macally USB Mini Optical Mouse, rev 1.10/22.65,
addr 4, iclass 3/1
ums0 at uhidev2: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
bootpath: /pci@f2000000/mac-io@17/ata-4@1f000/disk@0:/bsd
root on wd0a swap on wd0b dump on wd0b