ralink with networkmanager
|
View:
New views
6 Messages
—
Rating Filter:
Alert me
|
 |
ralink with networkmanager
by bouleetbil (gaetan)
::
Rate this Message:
Hi,
I try to use networkmanager with a ralink card but that don't work I don't see the wifi network. (For information that works with wicd) My config : kernel 2.6.31 Networkmanager 0.7.1.997 Networkmanager-applet 0.7.1 The logs : Networkmanager: /usr/sbin/NetworkManager --no-daemon NetworkManager: <info> starting... SIOCADDRT: Le fichier existe NetworkManager: <info> (eth0): new Ethernet device (driver: 'r8169') NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_22_20_01_af_b9 NetworkManager: <info> (ra0): driver does not support SSID scans (scan_capa 0x00). NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'rt2860') NetworkManager: <info> (ra0): exported as /org/freedesktop/Hal/devices/net_pci_1814_781 NetworkManager: <info> Trying to start the supplicant... NetworkManager: <info> (eth0): device state change: 1 -> 2 (reason 2) NetworkManager: <info> (eth0): preparing device. NetworkManager: <info> (eth0): deactivating device (reason: 2). -- Error received: Numerical result out of range -- Original message: type=0x19 length=56 flags=<REQUEST,ACK> sequence-nr=1256559306 pid=4199009 NetworkManager: <WARN> check_one_route(): (eth0) error -34 returned from rtnl_route_del(): Sucess NetworkManager: <info> (ra0): device state change: 1 -> 2 (reason 2) NetworkManager: <info> (ra0): preparing device. NetworkManager: <info> (ra0): deactivating device (reason: 2). NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed dmesg : RX DESC f66ec000 size = 2048 <-- RTMPAllocTxRxRingMemory, Status=0 --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat 1. Phy Mode = 0 2. Phy Mode = 0 3. Phy Mode = 0 RTMPSetPhyMode: channel is out of range, use first channel=1 MCS Set = 00 00 00 00 00 <==== RTMPInitialize, Status=0 0x1300 = 00073200 ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 683 ra0: no IPv6 routers present lspci : 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) 02:00.0 Network controller: RaLink RT2860 lsmod : rt2860sta 437984 1 If someone have an idea ;) bye -- #--------------------------------------------------------------------------- # Bouleetbil # #--------------------------------------------------------------------------- # http://www.frogdev.info # _ _ # (o)--(o) # /.______.\ # \________/ # ./ \. # ( . , ) # \ \_\\//_/ / # ~~ ~~ ~~ #--------------------------------------------------------------------------- _______________________________________________ NetworkManager-list mailing list NetworkManager-list@... http://mail.gnome.org/mailman/listinfo/networkmanager-list |
|
|
Re: ralink with networkmanager
by Dan Williams
::
Rate this Message:
On Tue, 2009-10-27 at 18:33 +0100, bouleetbil wrote:
> Hi, > I try to use networkmanager with a ralink card but that don't work I don't see the wifi network. (For information that works with wicd) > > My config : > kernel 2.6.31 > Networkmanager 0.7.1.997 > Networkmanager-applet 0.7.1 > > The logs : > Networkmanager: > /usr/sbin/NetworkManager --no-daemon > NetworkManager: <info> starting... > SIOCADDRT: Le fichier existe > NetworkManager: <info> (eth0): new Ethernet device (driver: 'r8169') > NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_22_20_01_af_b9 > NetworkManager: <info> (ra0): driver does not support SSID scans (scan_capa 0x00). > NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'rt2860') > NetworkManager: <info> (ra0): exported as /org/freedesktop/Hal/devices/net_pci_1814_781 > NetworkManager: <info> Trying to start the supplicant... > NetworkManager: <info> (eth0): device state change: 1 -> 2 (reason 2) > NetworkManager: <info> (eth0): preparing device. > NetworkManager: <info> (eth0): deactivating device (reason: 2). > -- Error received: Numerical result out of range > -- Original message: type=0x19 length=56 flags=<REQUEST,ACK> sequence-nr=1256559306 pid=4199009 > NetworkManager: <WARN> check_one_route(): (eth0) error -34 returned from rtnl_route_del(): Sucess > NetworkManager: <info> (ra0): device state change: 1 -> 2 (reason 2) > NetworkManager: <info> (ra0): preparing device. > NetworkManager: <info> (ra0): deactivating device (reason: 2). > NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed This looks like wpa_supplicant isn't in the expected state. What's the output of the following command when run as root? dbus-send --system --print-reply --dest=fi.epitest.hostap.WPASupplicant /fi/epitest/hostap/WPASupplicant fi.epitest.hostap.WPASupplicant.getInterface string:ra0 Dan > > dmesg : > RX DESC f66ec000 size = 2048 > <-- RTMPAllocTxRxRingMemory, Status=0 > --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat > 1. Phy Mode = 0 > 2. Phy Mode = 0 > 3. Phy Mode = 0 > RTMPSetPhyMode: channel is out of range, use first channel=1 > MCS Set = 00 00 00 00 00 > <==== RTMPInitialize, Status=0 > 0x1300 = 00073200 > ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 683 > ra0: no IPv6 routers present > > lspci : > 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) > 02:00.0 Network controller: RaLink RT2860 > > lsmod : > rt2860sta 437984 1 > > > If someone have an idea ;) > > bye _______________________________________________ NetworkManager-list mailing list NetworkManager-list@... http://mail.gnome.org/mailman/listinfo/networkmanager-list |
|
|
Re: ralink with networkmanager
by bouleetbil (gaetan)
::
Rate this Message:
Le Wed, 28 Oct 2009 10:25:16 -0700,
Dan Williams <dcbw@...> a écrit : > On Tue, 2009-10-27 at 18:33 +0100, bouleetbil wrote: > > Hi, > > I try to use networkmanager with a ralink card but that don't work I don't see the wifi network. (For information that works with wicd) > > > > My config : > > kernel 2.6.31 > > Networkmanager 0.7.1.997 > > Networkmanager-applet 0.7.1 > > > > The logs : > > Networkmanager: > > /usr/sbin/NetworkManager --no-daemon > > NetworkManager: <info> starting... > > SIOCADDRT: Le fichier existe > > NetworkManager: <info> (eth0): new Ethernet device (driver: 'r8169') > > NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_22_20_01_af_b9 > > NetworkManager: <info> (ra0): driver does not support SSID scans (scan_capa 0x00). > > NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'rt2860') > > NetworkManager: <info> (ra0): exported as /org/freedesktop/Hal/devices/net_pci_1814_781 > > NetworkManager: <info> Trying to start the supplicant... > > NetworkManager: <info> (eth0): device state change: 1 -> 2 (reason 2) > > NetworkManager: <info> (eth0): preparing device. > > NetworkManager: <info> (eth0): deactivating device (reason: 2). > > -- Error received: Numerical result out of range > > -- Original message: type=0x19 length=56 flags=<REQUEST,ACK> sequence-nr=1256559306 pid=4199009 > > NetworkManager: <WARN> check_one_route(): (eth0) error -34 returned from rtnl_route_del(): Sucess > > NetworkManager: <info> (ra0): device state change: 1 -> 2 (reason 2) > > NetworkManager: <info> (ra0): preparing device. > > NetworkManager: <info> (ra0): deactivating device (reason: 2). > > NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed > > This looks like wpa_supplicant isn't in the expected state. What's the > output of the following command when run as root? > > dbus-send --system --print-reply --dest=fi.epitest.hostap.WPASupplicant /fi/epitest/hostap/WPASupplicant fi.epitest.hostap.WPASupplicant.getInterface string:ra0 > > Dan > hi thanks for your reply : # dbus-send --system --print-reply --dest=fi.epitest.hostap.WPASupplicant /fi/epitest/hostap/WPASupplicant fi.epitest.hostap.WPASupplicant.getInterface string:ra0 Error org.freedesktop.DBus.Error.Spawn.ChildExited: Launch helper exited with unknown return code 0 I use wpa_supplicant-0.6.9 bye > > > > dmesg : > > RX DESC f66ec000 size = 2048 > > <-- RTMPAllocTxRxRingMemory, Status=0 > > --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat > > 1. Phy Mode = 0 > > 2. Phy Mode = 0 > > 3. Phy Mode = 0 > > RTMPSetPhyMode: channel is out of range, use first channel=1 > > MCS Set = 00 00 00 00 00 > > <==== RTMPInitialize, Status=0 > > 0x1300 = 00073200 > > ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 683 > > ra0: no IPv6 routers present > > > > lspci : > > 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) > > 02:00.0 Network controller: RaLink RT2860 > > > > lsmod : > > rt2860sta 437984 1 > > > > > > If someone have an idea ;) > > > > bye > -- #--------------------------------------------------------------------------- # Bouleetbil # #--------------------------------------------------------------------------- # http://www.frogdev.info # _ _ # (o)--(o) # /.______.\ # \________/ # ./ \. # ( . , ) # \ \_\\//_/ / # ~~ ~~ ~~ #--------------------------------------------------------------------------- _______________________________________________ NetworkManager-list mailing list NetworkManager-list@... http://mail.gnome.org/mailman/listinfo/networkmanager-list |
|
|
Re: ralink with networkmanager
by Dan Williams
::
Rate this Message:
On Wed, 2009-10-28 at 20:44 +0100, bouleetbil wrote:
> Le Wed, 28 Oct 2009 10:25:16 -0700, > Dan Williams <dcbw@...> a écrit : > > > On Tue, 2009-10-27 at 18:33 +0100, bouleetbil wrote: > > > Hi, > > > I try to use networkmanager with a ralink card but that don't work I don't see the wifi network. (For information that works with wicd) > > > > > > My config : > > > kernel 2.6.31 > > > Networkmanager 0.7.1.997 > > > Networkmanager-applet 0.7.1 > > > > > > The logs : > > > Networkmanager: > > > /usr/sbin/NetworkManager --no-daemon > > > NetworkManager: <info> starting... > > > SIOCADDRT: Le fichier existe > > > NetworkManager: <info> (eth0): new Ethernet device (driver: 'r8169') > > > NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_22_20_01_af_b9 > > > NetworkManager: <info> (ra0): driver does not support SSID scans (scan_capa 0x00). > > > NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'rt2860') > > > NetworkManager: <info> (ra0): exported as /org/freedesktop/Hal/devices/net_pci_1814_781 > > > NetworkManager: <info> Trying to start the supplicant... > > > NetworkManager: <info> (eth0): device state change: 1 -> 2 (reason 2) > > > NetworkManager: <info> (eth0): preparing device. > > > NetworkManager: <info> (eth0): deactivating device (reason: 2). > > > -- Error received: Numerical result out of range > > > -- Original message: type=0x19 length=56 flags=<REQUEST,ACK> sequence-nr=1256559306 pid=4199009 > > > NetworkManager: <WARN> check_one_route(): (eth0) error -34 returned from rtnl_route_del(): Sucess > > > NetworkManager: <info> (ra0): device state change: 1 -> 2 (reason 2) > > > NetworkManager: <info> (ra0): preparing device. > > > NetworkManager: <info> (ra0): deactivating device (reason: 2). > > > NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed > > > > This looks like wpa_supplicant isn't in the expected state. What's the > > output of the following command when run as root? > > > > dbus-send --system --print-reply --dest=fi.epitest.hostap.WPASupplicant /fi/epitest/hostap/WPASupplicant fi.epitest.hostap.WPASupplicant.getInterface string:ra0 > > > > Dan > > > > hi > thanks for your reply : > # dbus-send --system --print-reply --dest=fi.epitest.hostap.WPASupplicant /fi/epitest/hostap/WPASupplicant fi.epitest.hostap.WPASupplicant.getInterface string:ra0 > Error org.freedesktop.DBus.Error.Spawn.ChildExited: Launch helper exited with unknown return code 0 > > I use wpa_supplicant-0.6.9 Did you (or your distro) make sure to enable the D-Bus configuration interface when your wpa_supplicant was built? You'll also need the activation helper file in /usr/share/dbus-1/system-services/fi.epitest.hostap.WPASupplicant.service that should contain roughly this: [D-BUS Service] Name=fi.epitest.hostap.WPASupplicant Exec=/usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -u -f /var/log/wpa_supplicant.log User=root that should be part of your distro's normal supplicant package, but I guess it's not. Dan > bye > > > > > > > dmesg : > > > RX DESC f66ec000 size = 2048 > > > <-- RTMPAllocTxRxRingMemory, Status=0 > > > --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat > > > 1. Phy Mode = 0 > > > 2. Phy Mode = 0 > > > 3. Phy Mode = 0 > > > RTMPSetPhyMode: channel is out of range, use first channel=1 > > > MCS Set = 00 00 00 00 00 > > > <==== RTMPInitialize, Status=0 > > > 0x1300 = 00073200 > > > ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 683 > > > ra0: no IPv6 routers present > > > > > > lspci : > > > 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) > > > 02:00.0 Network controller: RaLink RT2860 > > > > > > lsmod : > > > rt2860sta 437984 1 > > > > > > > > > If someone have an idea ;) > > > > > > bye > > > > > _______________________________________________ NetworkManager-list mailing list NetworkManager-list@... http://mail.gnome.org/mailman/listinfo/networkmanager-list |
|
|
Re: ralink with networkmanager
by bouleetbil (gaetan)
::
Rate this Message:
Le Wed, 28 Oct 2009 12:45:41 -0700,
Dan Williams <dcbw@...> a écrit : > On Wed, 2009-10-28 at 20:44 +0100, bouleetbil wrote: > > Le Wed, 28 Oct 2009 10:25:16 -0700, > > Dan Williams <dcbw@...> a écrit : > > > > > On Tue, 2009-10-27 at 18:33 +0100, bouleetbil wrote: > > > > Hi, > > > > I try to use networkmanager with a ralink card but that don't work I don't see the wifi network. (For information that works with wicd) > > > > > > > > My config : > > > > kernel 2.6.31 > > > > Networkmanager 0.7.1.997 > > > > Networkmanager-applet 0.7.1 > > > > > > > > The logs : > > > > Networkmanager: > > > > /usr/sbin/NetworkManager --no-daemon > > > > NetworkManager: <info> starting... > > > > SIOCADDRT: Le fichier existe > > > > NetworkManager: <info> (eth0): new Ethernet device (driver: 'r8169') > > > > NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_22_20_01_af_b9 > > > > NetworkManager: <info> (ra0): driver does not support SSID scans (scan_capa 0x00). > > > > NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'rt2860') > > > > NetworkManager: <info> (ra0): exported as /org/freedesktop/Hal/devices/net_pci_1814_781 > > > > NetworkManager: <info> Trying to start the supplicant... > > > > NetworkManager: <info> (eth0): device state change: 1 -> 2 (reason 2) > > > > NetworkManager: <info> (eth0): preparing device. > > > > NetworkManager: <info> (eth0): deactivating device (reason: 2). > > > > -- Error received: Numerical result out of range > > > > -- Original message: type=0x19 length=56 flags=<REQUEST,ACK> sequence-nr=1256559306 pid=4199009 > > > > NetworkManager: <WARN> check_one_route(): (eth0) error -34 returned from rtnl_route_del(): Sucess > > > > NetworkManager: <info> (ra0): device state change: 1 -> 2 (reason 2) > > > > NetworkManager: <info> (ra0): preparing device. > > > > NetworkManager: <info> (ra0): deactivating device (reason: 2). > > > > NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed > > > > > > This looks like wpa_supplicant isn't in the expected state. What's the > > > output of the following command when run as root? > > > > > > dbus-send --system --print-reply --dest=fi.epitest.hostap.WPASupplicant /fi/epitest/hostap/WPASupplicant fi.epitest.hostap.WPASupplicant.getInterface string:ra0 > > > > > > Dan > > > > > > > hi > > thanks for your reply : > > # dbus-send --system --print-reply --dest=fi.epitest.hostap.WPASupplicant /fi/epitest/hostap/WPASupplicant fi.epitest.hostap.WPASupplicant.getInterface string:ra0 > > Error org.freedesktop.DBus.Error.Spawn.ChildExited: Launch helper exited with unknown return code 0 > > > > I use wpa_supplicant-0.6.9 > > Did you (or your distro) make sure to enable the D-Bus configuration > interface when your wpa_supplicant was built? You'll also need the > activation helper file > in /usr/share/dbus-1/system-services/fi.epitest.hostap.WPASupplicant.service that should contain roughly this: > > [D-BUS Service] > Name=fi.epitest.hostap.WPASupplicant > Exec=/usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -u -f /var/log/wpa_supplicant.log > User=root > > that should be part of your distro's normal supplicant package, but I > guess it's not. > > Dan > You have right, I've rebuild wpa_supplicant with dbus support CONFIG_CTRL_IFACE_DBUS=y, install /usr/share/dbus-1/system-services/wpa_supplicant.conf restart dbus but I've a new error : # dbus-send --system --print-reply --dest=fi.epitest.hostap.WPASupplicant /fi/epitest/hostap/WPASupplicant fi.epitest.hostap.WPASupplicant.getInterface string:ra0 Error org.freedesktop.DBus.Error.Spawn.ChildExited: Launch helper exited with unknown return code 255 Have I forgot something ? > > > bye > > > > > > > > > > dmesg : > > > > RX DESC f66ec000 size = 2048 > > > > <-- RTMPAllocTxRxRingMemory, Status=0 > > > > --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat > > > > 1. Phy Mode = 0 > > > > 2. Phy Mode = 0 > > > > 3. Phy Mode = 0 > > > > RTMPSetPhyMode: channel is out of range, use first channel=1 > > > > MCS Set = 00 00 00 00 00 > > > > <==== RTMPInitialize, Status=0 > > > > 0x1300 = 00073200 > > > > ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 683 > > > > ra0: no IPv6 routers present > > > > > > > > lspci : > > > > 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) > > > > 02:00.0 Network controller: RaLink RT2860 > > > > > > > > lsmod : > > > > rt2860sta 437984 1 > > > > > > > > > > > > If someone have an idea ;) > > > > > > > > bye > > > > > > > > > > -- #--------------------------------------------------------------------------- # Bouleetbil # #--------------------------------------------------------------------------- # http://www.frogdev.info # _ _ # (o)--(o) # /.______.\ # \________/ # ./ \. # ( . , ) # \ \_\\//_/ / # ~~ ~~ ~~ #--------------------------------------------------------------------------- _______________________________________________ NetworkManager-list mailing list NetworkManager-list@... http://mail.gnome.org/mailman/listinfo/networkmanager-list |
|
|
Re: ralink with networkmanager
by bouleetbil (gaetan)
::
Rate this Message:
Le Wed, 28 Oct 2009 12:45:41 -0700,
Dan Williams <dcbw@...> a écrit : > On Wed, 2009-10-28 at 20:44 +0100, bouleetbil wrote: > > Le Wed, 28 Oct 2009 10:25:16 -0700, > > Dan Williams <dcbw@...> a écrit : > > > > > On Tue, 2009-10-27 at 18:33 +0100, bouleetbil wrote: > > > > Hi, > > > > I try to use networkmanager with a ralink card but that don't work I don't see the wifi network. (For information that works with wicd) > > > > > > > > My config : > > > > kernel 2.6.31 > > > > Networkmanager 0.7.1.997 > > > > Networkmanager-applet 0.7.1 > > > > > > > > The logs : > > > > Networkmanager: > > > > /usr/sbin/NetworkManager --no-daemon > > > > NetworkManager: <info> starting... > > > > SIOCADDRT: Le fichier existe > > > > NetworkManager: <info> (eth0): new Ethernet device (driver: 'r8169') > > > > NetworkManager: <info> (eth0): exported as /org/freedesktop/Hal/devices/net_00_22_20_01_af_b9 > > > > NetworkManager: <info> (ra0): driver does not support SSID scans (scan_capa 0x00). > > > > NetworkManager: <info> (ra0): new 802.11 WiFi device (driver: 'rt2860') > > > > NetworkManager: <info> (ra0): exported as /org/freedesktop/Hal/devices/net_pci_1814_781 > > > > NetworkManager: <info> Trying to start the supplicant... > > > > NetworkManager: <info> (eth0): device state change: 1 -> 2 (reason 2) > > > > NetworkManager: <info> (eth0): preparing device. > > > > NetworkManager: <info> (eth0): deactivating device (reason: 2). > > > > -- Error received: Numerical result out of range > > > > -- Original message: type=0x19 length=56 flags=<REQUEST,ACK> sequence-nr=1256559306 pid=4199009 > > > > NetworkManager: <WARN> check_one_route(): (eth0) error -34 returned from rtnl_route_del(): Sucess > > > > NetworkManager: <info> (ra0): device state change: 1 -> 2 (reason 2) > > > > NetworkManager: <info> (ra0): preparing device. > > > > NetworkManager: <info> (ra0): deactivating device (reason: 2). > > > > NetworkManager: supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed > > > > > > This looks like wpa_supplicant isn't in the expected state. What's the > > > output of the following command when run as root? > > > > > > dbus-send --system --print-reply --dest=fi.epitest.hostap.WPASupplicant /fi/epitest/hostap/WPASupplicant fi.epitest.hostap.WPASupplicant.getInterface string:ra0 > > > > > > Dan > > > > > > > hi > > thanks for your reply : > > # dbus-send --system --print-reply --dest=fi.epitest.hostap.WPASupplicant /fi/epitest/hostap/WPASupplicant fi.epitest.hostap.WPASupplicant.getInterface string:ra0 > > Error org.freedesktop.DBus.Error.Spawn.ChildExited: Launch helper exited with unknown return code 0 > > > > I use wpa_supplicant-0.6.9 > > Did you (or your distro) make sure to enable the D-Bus configuration > interface when your wpa_supplicant was built? You'll also need the > activation helper file > in /usr/share/dbus-1/system-services/fi.epitest.hostap.WPASupplicant.service that should contain roughly this: > > [D-BUS Service] > Name=fi.epitest.hostap.WPASupplicant > Exec=/usr/sbin/wpa_supplicant -c /etc/wpa_supplicant/wpa_supplicant.conf -u -f /var/log/wpa_supplicant.log > User=root > > that should be part of your distro's normal supplicant package, but I > guess it's not. > > Dan > > > > bye > > > > > > > > > > dmesg : > > > > RX DESC f66ec000 size = 2048 > > > > <-- RTMPAllocTxRxRingMemory, Status=0 > > > > --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat > > > > 1. Phy Mode = 0 > > > > 2. Phy Mode = 0 > > > > 3. Phy Mode = 0 > > > > RTMPSetPhyMode: channel is out of range, use first channel=1 > > > > MCS Set = 00 00 00 00 00 > > > > <==== RTMPInitialize, Status=0 > > > > 0x1300 = 00073200 > > > > ===>rt_ioctl_giwscan. 7(7) BSS returned, data->length = 683 > > > > ra0: no IPv6 routers present > > > > > > > > lspci : > > > > 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) > > > > 02:00.0 Network controller: RaLink RT2860 > > > > > > > > lsmod : > > > > rt2860sta 437984 1 > > > > > > > > > > > > If someone have an idea ;) > > > > > > > > bye > > > > > > > > > > Hi I've install wpa_supplicant.conf the into /etc/dbus-1/system.d/ the good directory : dbus-send --system --print-reply --dest=fi.epitest.hostap.WPASupplicant /fi/epitest/hostap/WPASupplicant fi.epitest.hostap.WPASupplicant.getInterface string:ra0 Error org.freedesktop.DBus.Error.Spawn.ChildExited: Launch helper exited with unknown return code 0 but it seems that a problem with my card card : 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) and wpa With an other chipset (intel) that works. I will search thanks for your help. -- #--------------------------------------------------------------------------- # Bouleetbil # #--------------------------------------------------------------------------- # http://www.frogdev.info # _ _ # (o)--(o) # /.______.\ # \________/ # ./ \. # ( . , ) # \ \_\\//_/ / # ~~ ~~ ~~ #--------------------------------------------------------------------------- _______________________________________________ NetworkManager-list mailing list NetworkManager-list@... http://mail.gnome.org/mailman/listinfo/networkmanager-list |
| Free embeddable forum powered by Nabble | Forum Help |
