routing question

[Andrew Gallo]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Greetings:

Hope you don't mind a question from someone just getting his feet wet :)

First off, if I want Kamailio to act as a SIP router among, say, a group
of Asterisk PBXs (meaning, Kamailio will have no user registrations, but
just pass SIP messages to and from the Asterisks), would I do this in
the least cost routing table or in carrier routes table, or via another
method?
(assume for the moment that all the PBXs are under my control, these
aren't connections outside my organization, no connections to the PSTN).

I figured it would be with lcr, so I tried compiling 3.0.0RC1 with that
module removed from the exclude list.  I received the following error on
'make install'

make[1]: Entering directory
`/usr/local/src/kamailio-3.0.0/kamailio/modules/lcr'
make[1]: Leaving directory
`/usr/local/src/kamailio-3.0.0/kamailio/modules/lcr'
config.mak included
make[1]: Entering directory
`/usr/local/src/kamailio-3.0.0/kamailio/modules/lcr'
gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -m32
- -minline-all-stringops -falign-loops -ftree-vectorize
- -fno-strict-overflow -mtune=athlon64 -Wall    -DNAME='"kamailio"'
- -DVERSION='"3.0.0-rc1"' -DARCH='"i386"' -DOS='linux_'
- -DOS_QUOTED='"linux"' -DCOMPILER='"gcc 4.3.2"' -D__CPU_i386 -D__OS_linux
- -DSER_VER=3000000 -DCFG_DIR='"/usr/local/etc/kamailio/"' -DPKG_MALLOC
- -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP
- -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DUSE_DNS_CACHE -DUSE_DNS_FAILOVER
- -DUSE_DST_BLACKLIST -DUSE_NAPTR -DDBG_QM_MALLOC -DUSE_TLS -DTLS_HOOKS
- -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024
- -DCC_GCC_LIKE_ASM -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN
- -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL
- -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_SCHED_SETSCHEDULER -DHAVE_EPOLL
- -DHAVE_SIGIO_RT -DSIGINFO64_WORKARROUND -DUSE_FUTEX -DHAVE_SELECT
- -I/usr/local/include -I/usr/local/include -I/opt/include
- -I/usr/sfw/include -DOPENSER_MOD_INTERFACE -DMOD_NAME='"lcr"' -c hash.c
- -o hash.o
In file included from hash.c:26:
lcr_mod.h:34:18: error: pcre.h: No such file or directory
In file included from hash.c:26:
lcr_mod.h:51: error: expected specifier-qualifier-list before âpcreâ
hash.c:34: error: expected declaration specifiers or â...â before âpcreâ
hash.c: In function âlcr_hash_table_insertâ:
hash.c:56: error: âstruct lcr_infoâ has no member named âfrom_uri_reâ
hash.c:56: error: âfrom_uri_reâ undeclared (first use in this function)
hash.c:56: error: (Each undeclared identifier is reported only once
hash.c:56: error: for each function it appears in.)
hash.c:58: error: âstruct lcr_infoâ has no member named âgrp_idâ
hash.c:59: error: âstruct lcr_infoâ has no member named âfirst_gwâ
hash.c:60: error: âstruct lcr_infoâ has no member named âpriorityâ
hash.c:66: error: âstruct lcr_infoâ has no member named ânextâ
hash.c: In function âlcr_hash_table_contents_freeâ:
hash.c:106: error: âstruct lcr_infoâ has no member named âgrp_idâ
hash.c:106: error: âstruct lcr_infoâ has no member named âgrp_idâ
hash.c:106: error: âstruct lcr_infoâ has no member named âgrp_idâ
hash.c:106: error: âstruct lcr_infoâ has no member named âgrp_idâ
hash.c:106: error: âstruct lcr_infoâ has no member named âgrp_idâ
hash.c:107: error: âstruct lcr_infoâ has no member named âfrom_uri_reâ
hash.c:108: error: âstruct lcr_infoâ has no member named âfrom_uri_reâ
hash.c:110: error: âstruct lcr_infoâ has no member named ânextâ
make[1]: *** [hash.o] Error 1
make[1]: Leaving directory
`/usr/local/src/kamailio-3.0.0/kamailio/modules/lcr'
make: *** [install-modules] Error 1






If I leave lcr in the exclude list, I can make/make install, but if I
try to add an entry into the lcr table, I get this error:

# kamctl lcr addgw labCM 172.16.59.6 5060 1 2 1
ERROR 1054 (42S22) at line 1: Unknown column 'ping' in 'field list'
ERROR: lcr - SQL Error





System info:
Kamailio 3.0.0 RC1 from GIT
debian 5.0.3 (2.6.26-2-686)
gcc -v
Using built-in specs.
Target: i486-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Debian
4.3.2-1.1' --with-bugurl=file:///usr/share/doc/gcc-4.3/README.Bugs
- --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr
- --enable-shared --with-system-zlib --libexecdir=/usr/lib
- --without-included-gettext --enable-threads=posix --enable-nls
- --with-gxx-include-dir=/usr/include/c++/4.3 --program-suffix=-4.3
- --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc
- --enable-mpfr --enable-targets=all --enable-cld
- --enable-checking=release --build=i486-linux-gnu --host=i486-linux-gnu
- --target=i486-linux-gnu
Thread model: posix
gcc version 4.3.2 (Debian 4.3.2-1.1)






Thank you!



-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkrx/CMACgkQQr/gMVyFYySWQgCeJoW2VLWRI85bHdC9ThwnEwLc
pWQAoJZVtBEzdRI8+3xBoLnlWJxNXbj/
=Wwjk
-----END PGP SIGNATURE-----

_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@...
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

El Miércoles, 4 de Noviembre de 2009, Andrew Gallo escribió:
> In file included from hash.c:26:
> lcr_mod.h:34:18: error: pcre.h: No such file or directory

You must install pcre development library.


--
Iñaki Baz Castillo <ibc@...>

_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@...
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

[Olle E. Johansson]

4 nov 2009 kl. 23.11 skrev Andrew Gallo:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Greetings:
>
> Hope you don't mind a question from someone just getting his feet  
> wet :)
>
> First off, if I want Kamailio to act as a SIP router among, say, a  
> group
> of Asterisk PBXs (meaning, Kamailio will have no user registrations,  
> but
> just pass SIP messages to and from the Asterisks), would I do this in
> the least cost routing table or in carrier routes table, or via  
> another
> method?
> (assume for the moment that all the PBXs are under my control, these
> aren't connections outside my organization, no connections to the  
> PSTN).

If you want just to distribute the calls between the servers and have  
all the Asterisk severs do the same task, then dispatcher is the  
module you need. If each server has a different task, then you either  
hard code the dialplan into the configuration file or use one of the  
dialplan/routing modules. There are several with different flavours,  
and some of them are designed for a very specific task. If you have a  
very simple routing plan, you can just store variables (AVP's in  
Kamailian) in a database table and read them in or use the sql module.

Regards
/O

_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@...
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

[miconda]

Hello,

On 04.11.2009 23:11 Uhr, Andrew Gallo wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> [...]
> If I leave lcr in the exclude list, I can make/make install, but if I
> try to add an entry into the lcr table, I get this error:
>
> # kamctl lcr addgw labCM 172.16.59.6 5060 1 2 1
> ERROR 1054 (42S22) at line 1: Unknown column 'ping' in 'field list'
> ERROR: lcr - SQL Error
>  

ping column is no longer in the gw table, probably was removed since 1.5
and kamctl not updated...

Cheers,
Daniel

--
Daniel-Constantin Mierla
* http://www.asipto.com/


_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@...
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

[Juha Heinanen]

Daniel-Constantin Mierla writes:

 > ping column is no longer in the gw table, probably was removed since 1.5
 > and kamctl not updated...

as i mentioned earlier, i don't consider ctl a viable option in
configuring lcr module.  there is simple too many fields in the tables.

-- juha

_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@...
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

[miconda]

On 05.11.2009 11:31 Uhr, Juha Heinanen wrote:
> Daniel-Constantin Mierla writes:
>
>  > ping column is no longer in the gw table, probably was removed since 1.5
>  > and kamctl not updated...
>
> as i mentioned earlier, i don't consider ctl a viable option in
> configuring lcr module.  there is simple too many fields in the tables.
>
>  
understand, no problem with that.

Is there a place on wiki where you listed the changes in 3.0 since 1.5?
There are some, but couldn't find about lcr:
http://sip-router.org/wiki/migration/kamailio-tips

And more K 3.0 specific:
http://www.kamailio.org/dokuwiki/doku.php/install:1.5.x-to-3.0.0

AFAIK, there were updates to table structure in lcr, permissions and
maybe carrierroute. We have to collect them to help people migrate to
Kamailio 3.0 and sip router.

Thanks,
Daniel

--
Daniel-Constantin Mierla
* http://www.asipto.com/


_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@...
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

[Juha Heinanen]

Daniel-Constantin Mierla writes:

 > Is there a place on wiki where you listed the changes in 3.0 since
 > 1.5?

see http://sip-router.org/wiki/features/new-in-devel

-- juha

_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@...
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

[Andrew Gallo]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Daniel-Constantin Mierla wrote:

> Hello,
>
> On 04.11.2009 23:11 Uhr, Andrew Gallo wrote:
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> [...]
>> If I leave lcr in the exclude list, I can make/make install, but if I
>> try to add an entry into the lcr table, I get this error:
>>
>> # kamctl lcr addgw labCM 172.16.59.6 5060 1 2 1
>> ERROR 1054 (42S22) at line 1: Unknown column 'ping' in 'field list'
>> ERROR: lcr - SQL Error
>>  
> ping column is no longer in the gw table, probably was removed since 1.5
> and kamctl not updated...
>
> Cheers,
> Daniel
>

Thank you folks for the great information.  I'll continue to play around
and learn :)


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkrys7gACgkQQr/gMVyFYyR1hQCfSyfoq5VkdBnEFW4Upc2dAV8+
AhUAn0UB02yLxobBmCDOZdgA8IBX4AT1
=PgU2
-----END PGP SIGNATURE-----

_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@...
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

[Henning Westerholt-2]

Some parts of this message have been removed. Learn more about Nabble's security policy.

On Donnerstag, 5. November 2009, Daniel-Constantin Mierla wrote:
> AFAIK, there were updates to table structure in lcr, permissions and
> maybe carrierroute. We have to collect them to help people migrate to
> Kamailio 3.0 and sip router.

Hi Daniel,

the cr database scheme was not changed from 1.5 to 3.0.

Cheers,

Henning

_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@...
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

[Juha Heinanen]

Daniel-Constantin Mierla writes:

 > I know that page, but doesn't mention anything about removal/addition of
 > new columns in db structure -- this is what I was looking for.

i just added there info also about db changes.

-- juha

_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@...
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

[miconda]

On 05.11.2009 12:05 Uhr, Juha Heinanen wrote:
> Daniel-Constantin Mierla writes:
>
>  > Is there a place on wiki where you listed the changes in 3.0 since
>  > 1.5?
>
> see http://sip-router.org/wiki/features/new-in-devel
>
>  

I know that page, but doesn't mention anything about removal/addition of
new columns in db structure -- this is what I was looking for.

Daniel

--
Daniel-Constantin Mierla
* http://www.asipto.com/


_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@...
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

[miconda]

On 05.11.2009 12:24 Uhr, Henning Westerholt wrote:

> On Donnerstag, 5. November 2009, Daniel-Constantin Mierla wrote:
> > AFAIK, there were updates to table structure in lcr, permissions and
> > maybe carrierroute. We have to collect them to help people migrate to
> > Kamailio 3.0 and sip router.
>
>
> Hi Daniel,
>
>
> the cr database scheme was not changed from 1.5 to 3.0.
>
>

thanks Henning, this is good from migration point of view! There was
some work on the module and I couldn't be sure what was touched ...

Cheers,
Daniel

--
Daniel-Constantin Mierla
* http://www.asipto.com/


_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@...
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

[miconda]

On 05.11.2009 12:34 Uhr, Juha Heinanen wrote:
> Daniel-Constantin Mierla writes:
>
>  > I know that page, but doesn't mention anything about removal/addition of
>  > new columns in db structure -- this is what I was looking for.
>
> i just added there info also about db changes.
>
>  
thanks! Did you do some updates to db structure of permissions module?

Cheers,
Daniel

--
Daniel-Constantin Mierla
* http://www.asipto.com/


_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@...
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

[Juha Heinanen]

Daniel-Constantin Mierla writes:

 > thanks! Did you do some updates to db structure of permissions
 > module?

forgot that one. it is now added.

-- juha

_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users@...
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users