volume.* properties on usb stick
|
View:
New views
2 Messages
—
Rating Filter:
Alert me
|
 |
volume.* properties on usb stick
by Massimo Maiurana
::
Rate this Message:
hi all,
I'm trying to make my slack-12.2 system to automatically handle an usb mass storage device, but no luck until now. I have a little mp3 player which is correctly shown on my brother's pc running ubuntu. when I plug it in my pc udev correctly see it, loads the mass-storage driver, assign the stick to the /dev/sda node and also create symlinks in /dev/disk/*/. hal recognize the new hardware but, for what I understand, doesn't realize it is a disk, as this device doesn't have any volume.* or storage.* properties set. you can read in the bottom of this email what was added in the lshal output on stick insertion. can you point me to a direction where I can investigate? what is responsible for setting the correct properties for the device? thanks in advance. ---- begin lshal output ----- udi = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000' info.linux.driver = 'usb' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1f_2' (string) info.product = 'FlashDrive with MP3 Player' (string) info.subsystem = 'usb_device' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000' (string) info.vendor = 'AVID Electronics Corp.' (string) linux.device_file = '/dev/bus/usb/001/009' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1' (string) usb_device.bus_number = 1 (0x1) (int) usb_device.can_wake_up = false (bool) usb_device.configuration_value = 1 (0x1) (int) usb_device.device_class = 0 (0x0) (int) usb_device.device_protocol = 0 (0x0) (int) usb_device.device_revision_bcd = 4112 (0x1010) (int) usb_device.device_subclass = 0 (0x0) (int) usb_device.is_self_powered = false (bool) usb_device.linux.device_number = 9 (0x9) (int) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1' (string) usb_device.max_power = 100 (0x64) (int) usb_device.num_configurations = 1 (0x1) (int) usb_device.num_interfaces = 1 (0x1) (int) usb_device.num_ports = 0 (0x0) (int) usb_device.product = 'FlashDrive with MP3 Player' (string) usb_device.product_id = 41113 (0xa099) (int) usb_device.serial = '000100000000' (string) usb_device.speed = 12.0 (12) (double) usb_device.vendor = 'AVID Electronics Corp.' (string) usb_device.vendor_id = 4924 (0x133c) (int) usb_device.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000_if0' info.linux.driver = 'usb-storage' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000' (string) info.product = 'USB Mass Storage Interface' (string) info.subsystem = 'usb' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000_if0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'usb' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0' (string) usb.bus_number = 1 (0x1) (int) usb.can_wake_up = false (bool) usb.configuration_value = 1 (0x1) (int) usb.device_class = 0 (0x0) (int) usb.device_protocol = 0 (0x0) (int) usb.device_revision_bcd = 4112 (0x1010) (int) usb.device_subclass = 0 (0x0) (int) usb.interface.class = 8 (0x8) (int) usb.interface.description = 'Mass Storage Class' (string) usb.interface.number = 0 (0x0) (int) usb.interface.protocol = 80 (0x50) (int) usb.interface.subclass = 6 (0x6) (int) usb.is_self_powered = false (bool) usb.linux.device_number = 9 (0x9) (int) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0' (string) usb.max_power = 100 (0x64) (int) usb.num_configurations = 1 (0x1) (int) usb.num_interfaces = 1 (0x1) (int) usb.num_ports = 0 (0x0) (int) usb.product = 'USB Mass Storage Interface' (string) usb.product_id = 41113 (0xa099) (int) usb.serial = '000100000000' (string) usb.speed = 12.0 (12) (double) usb.vendor = 'AVID Electronics Corp.' (string) usb.vendor_id = 4924 (0x133c) (int) usb.version = 2.0 (2) (double) udi = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000_if0_scsi_host_0' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000_if0' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000_if0_scsi_host_0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0/host7' (string) scsi_host.host = 7 (0x7) (int) udi = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000_if0_scsi_host_0_scsi_device_lun0' info.linux.driver = 'sd' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000_if0_scsi_host_0' (string) info.product = 'SCSI Device' (string) info.subsystem = 'scsi' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000_if0_scsi_host_0_scsi_device_lun0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0/host7/target7:0:0/7:0:0:0' (string) scsi.bus = 0 (0x0) (int) scsi.host = 7 (0x7) (int) scsi.lun = 0 (0x0) (int) scsi.model = 'NAND Flash' (string) scsi.target = 0 (0x0) (int) scsi.type = 'disk' (string) scsi.vendor = 'AVID' (string) udi = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000_if0_scsi_host_0_scsi_device_lun0_scsi_generic' info.capabilities = {'scsi_generic'} (string list) info.category = 'scsi_generic' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000_if0_scsi_host_0_scsi_device_lun0' (string) info.product = 'SCSI Generic Interface' (string) info.subsystem = 'scsi_generic' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000_if0_scsi_host_0_scsi_device_lun0_scsi_generic' (string) linux.device_file = '/dev/sg0' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_generic' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0/host7/target7:0:0/7:0:0:0/scsi_generic/sg0' (string) scsi_generic.device = '/dev/sg0' (string) udi = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000_if0_scsi_host' info.capabilities = {'scsi_host'} (string list) info.category = 'scsi_host' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000_if0' (string) info.product = 'SCSI Host Adapter' (string) info.subsystem = 'scsi_host' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_133c_a099_000100000000_if0_scsi_host' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'scsi_host' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0/host7/scsi_host/host7' (string) scsi_host.host = 7 (0x7) (int) ---- end lshal output ----- -- Massimo Maiurana massimo<at>ragusa.linux.it http://massimo.solira.org GPG keyID #7044D601 Articolo 33 - [...]Enti e privati hanno il diritto di istituire scuole ed istituti di educazione, senza oneri per lo Stato.[...] _______________________________________________ hal mailing list hal@... http://lists.freedesktop.org/mailman/listinfo/hal |
|
|
[SOLVED] Re: volume.* properties on usb stick
by Massimo Maiurana
::
Rate this Message:
Massimo Maiurana, il 13/09/2009 13:54, scrisse:
> hi all, > I'm trying to make my slack-12.2 system to automatically handle an usb > mass storage device, but no luck until now. ehm... I've just discovered that for hal to work in slackware 12.2 it is needed to install the parted package. I still can't understand the reason for this, but I did it and now all works. sorry for the noise. -- Massimo Maiurana massimo<at>ragusa.linux.it http://massimo.solira.org GPG keyID #7044D601 Articolo 33 - [...]Enti e privati hanno il diritto di istituire scuole ed istituti di educazione, senza oneri per lo Stato.[...] _______________________________________________ hal mailing list hal@... http://lists.freedesktop.org/mailman/listinfo/hal |
signature.asc (204 bytes) | Free embeddable forum powered by Nabble | Forum Help |
