zd1211rw 1-1.1:1.0: zd_usb_ioread16v() read timed out
|
View:
New views
6 Messages
—
Rating Filter:
Alert me
|
 |
zd1211rw 1-1.1:1.0: zd_usb_ioread16v() read timed out
by Sundar08
::
Rate this Message:
I am unable to get the belkin wifi dongle work on my ARM target board.I have described my complete steps.Any advise appreciated.
1.Is there any other known kernel patches that I can apply? 2.Is something wrong with my USB subsystem? 3.I have tried various cable length/with and without hub.Any other ideas? Usb dongle:BelkinF5D7050 (ZD1211 based,verified with windows driver) ------ # uname -r 2.6.24.7-omap1-arm2 kernel configuration: -------------------- Networking -> Wireless-> Wireless extensions , Generic IEEE 802.11 Networking Stack (mac80211), 'simple' rate control algorithm ,Enable debugging output , Software MAC add-on to the IEEE 802.11 networking stack Device Drivers->Networking Device Support->Wireless LAN->ZyDAS ZD1211/ZD1211B USB-wireless support Device Drivers->USB device support-> EHCI HCD (USB 2.0) support(disabled) Device Drivers->USB device support->USB Gadget Support->Gadget Zero (DEVELOPMENT) Device Drivers->Generic options->support for firmware upload Toolchain: arm Codesourcery 2007q3 lsusb ----- bus 001 Device 003: ID 1267:0103 Logic3 / SpectraVideo plc Bus 001 Device 002: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub(I am behind the usb hub) Bus 001 Device 001: ID 0000:0000 Dmesg ------ usb 1-1.1:1.0: uevent zd1211rw 1-1.1:1.0: usb_probe_interface zd1211rw 1-1.1:1.0: usb_probe_interface - got id usb 1-1.1: print_id() 050d:705c v4810 full usb 1-1.1: reset full speed USB device using musb_hdrc and address 5 zd1211rw 1-1.1:1.0: zd_netdev_alloc() netdev->flags 0x1002 zd1211rw 1-1.1:1.0: zd_netdev_alloc() netdev->features 0x00000000 zd1211rw 1-1.1:1.0: zd_chip_read_mac_addr_fw() zd1211rw 1-1.1:1.0: probe() successful zd1211rw 1-1.1:1.0: eth1 drivers/usb/core/inode.c: creating file '005' usb 1-1.1: new device strings: Mfr=16, Product=32, SerialNumber=0 usb 1-1.1: Product: USB2.0 WLAN usb 1-1.1: Manufacturer: Belkin hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002 zd1211rw 1-1.1:1.0: iw_get_range() zd1211rw 1-1.1:1.0: zd_usb_init_hw() usb 1-1.1: request_fw_file() fw name zd1211/zd1211b_ub usb 1-1.1: upload_firmware() firmware device id 0x4810 is equal to the actual device id usb 1-1.1: request_fw_file() fw name zd1211/zd1211b_uphr usb 1-1.1: upload_code() transfer size 4096 usb 1-1.1: upload_code() transfer size 1024 usb 1-1.1: upload_code() firmware confirm return value 0x01 zd1211rw 1-1.1:1.0: zd_usb_enable_int() zd1211rw 1-1.1:1.0: zd_usb_enable_int() submit urb c7f0f120 zd1211rw 1-1.1:1.0: zd_chip_init_hw() zd1211rw 1-1.1:1.0: dump_cr() CR_AFTER_PNP 0x00000000 zd1211rw 1-1.1:1.0: dump_cr() CR_GPI_EN 0x00000000 zd1211rw 1-1.1:1.0: zd_usb_ioread16v() read timed out zd1211rw 1-1.1:1.0: zd_ioread32v_locked() error: zd_ioread16v_locked. Error number -110 zd1211rw 1-1.1:1.0: dump_cr() error reading CR_INTERRUPT. Error number -110 zd1211rw 1-1.1:1.0: zd_usb_disable_int() urb c7f0f120 killed zd1211rw 1-1.1:1.0: zd_usb_init_hw() couldn't initialize mac. Error number -110 zd1211rw 1-1.1:1.0: iw_get_range() zd1211rw 1-1.1:1.0: zd_usb_init_hw() usb 1-1.1: request_fw_file() fw name zd1211/zd1211b_ub usb 1-1.1: upload_firmware() firmware device id 0x4810 is equal to the actual device id usb 1-1.1: request_fw_file() fw name zd1211/zd1211b_uphr usb 1-1.1: upload_code() transfer size 4096 usb 1-1.1: upload_code() transfer size 1024 usb 1-1.1: upload_code() firmware confirm return value 0x01 # NetworkManager: <WARN> nm_device_802_11_wireless_scan(): could not trigger wireless scan on device eth1: No such device # ifconfig eth1 up musb_h_tx_flush_fifo 124: Could not flush host TX fifo: csr: 020a musb_h_ep0_irq 1090: no URB for end 0 usb 1-1.1: USB control request for firmware upload failed. Error number -110 usb 1-1.1: Could not upload firmware code uph. Error number -110 zd1211rw 1-1.1:1.0: couldn't load firmware. Error number -110 ifconfig: SIOCSIFFLAGS: Connection timed out # musb_h_tx_flush_fifo 124: Could not flush host TX fifo: csr: 020a musb_h_ep0_irq 1090: no URB for end 0 usb 1-1.1: USB control request for firmware upload failed. Error number -110 usb 1-1.1: Could not upload firmware code uph. Error number -110 zd1211rw 1-1.1:1.0: couldn't load firmware. Error number -110 Thanks Sundar ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs |
|
|
Re: zd1211rw 1-1.1:1.0: zd_usb_ioread16v() read timed out
by Hin-Tak Leung-3
::
Rate this Message:
--- On Tue, 7/10/08, Sundar Visvanathan <fcrd73@...> wrote:
<snipped> > usb 1-1.1: USB control request for firmware upload failed. > Error number -110 > > usb 1-1.1: Could not upload firmware code uph. Error number > -110 > zd1211rw 1-1.1:1.0: couldn't load firmware. Error > number -110 firmware upload failed. check your firmware files? ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs |
|
|
Re: zd1211rw 1-1.1:1.0: zd_usb_ioread16v() read timed out
by Sundar08
::
Rate this Message:
When you plug the dongle in at the first time,the firmware files get uploaded in the correct way(ref: first section of dmesg log). It errors out when you do an 'ifconfig' subsequently. My firmware files are located in /lib/firmware/zd1211/.
thanks for the reply. Sundar
|
|
|
Re: zd1211rw 1-1.1:1.0: zd_usb_ioread16v() read timed out
by Sundar08
::
Rate this Message:
>usb 1-1.1: request_fw_file() fw name zd1211/zd1211b_ub
>usb 1-1.1: upload_firmware() firmware device id 0x4810 is equal to the actual device id >usb 1-1.1: request_fw_file() fw name zd1211/zd1211b_uphr >usb 1-1.1: upload_code() transfer size 4096 >usb 1-1.1: upload_code() transfer size 1024 >usb 1-1.1: upload_code() firmware confirm return value 0x01 When you plug the dongle in at the first time,the firmware files get uploaded in the correct way(ref: first section of dmesg log). It errors out when you do an 'ifconfig' subsequently. My firmware files are located in /lib/firmware/zd1211/. thanks for the reply. Sundar On Tue, Oct 7, 2008 at 3:02 PM, Hin-Tak Leung <htl10@...> wrote: --- On Tue, 7/10/08, Sundar Visvanathan <fcrd73@...> wrote: ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs |
|
|
Re: zd1211rw 1-1.1:1.0: zd_usb_ioread16v() read timed out
by Sundar08
::
Rate this Message:
I got the dongle to work inconsistently on "2.6.22.18-omap1" ,configured the same as earlier in the post.The dongle works fresh out of the box.But on second and consecutive attempts it stops working and goes into reset mode.
fail log: hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0008 hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x101 usb 1-1.3: new full speed USB device using musb_hdrc and address 4 usb 1-1.3: not running at top speed; connect to a high speed hub usb 1-1.3: default language 0x0409 usb 1-1.3: new device strings: Mfr=16, Product=32, SerialNumber=0 usb 1-1.3: Product: USB2.0 WLAN usb 1-1.3: Manufacturer: Belkin usb 1-1.3: device v050d p705c is not supported usb 1-1.3: uevent usb 1-1.3: usb_probe_device usb 1-1.3: configuration #1 chosen from 1 choice usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0) usb 1-1.3:1.0: uevent usb 1-1.3:1.0: uevent zd1211rw 1-1.3:1.0: usb_probe_interface zd1211rw 1-1.3:1.0: usb_probe_interface - got id usb 1-1.3: print_id() 050d:705c v4810 full usb 1-1.3: reset full speed USB device using musb_hdrc and address 4 zd1211rw 1-1.3:1.0: zd_netdev_alloc() netdev->flags 0x1002 zd1211rw 1-1.3:1.0: zd_netdev_alloc() netdev->features 0x00000000 usb 1-1.3: request_fw_file() fw name zd1211/zd1211b_ub usb 1-1.3: upload_firmware() firmware device id 0x4810 is equal to the actual device id usb 1-1.3: request_fw_file() fw name zd1211/zd1211b_uphr usb 1-1.3: upload_code() transfer size 4096 usb 1-1.3: upload_code() transfer size 1024 usb 1-1.3: upload_code() firmware confirm return value 0x01 usb_endpoint usbdev1.4_ep01: ep_device_release called for usbdev1.4_ep01 usb_endpoint usbdev1.4_ep82: ep_device_release called for usbdev1.4_ep82 usb_endpoint usbdev1.4_ep83: ep_device_release called for usbdev1.4_ep83 usb_endpoint usbdev1.4_ep04: ep_device_release called for usbdev1.4_ep04 zd1211rw 1-1.3:1.0: zd_usb_enable_int() zd1211rw 1-1.3:1.0: zd_usb_enable_int() submit urb c4623260 zd1211rw 1-1.3:1.0: zd_chip_init_hw() usb 1-1.3: int_urb_complete() error: urb c4623260 wrong type zd1211rw 1-1.3:1.0: zd_usb_ioread16v() read timed out zd1211rw 1-1.3:1.0: zd_ioread32v_locked() error: zd_ioread16v_locked. Error number -110 zd1211rw 1-1.3:1.0: dump_cr() error reading CR_AFTER_PNP. Error number -110 zd1211rw 1-1.3:1.0: zd_usb_disable_int() urb c4623260 killed zd1211rw 1-1.3:1.0: probe() couldn't initialize mac. Error number -110 usb 1-1.3: reset full speed USB device using musb_hdrc and address 4 usb_endpoint usbdev1.4_ep01: ep_device_release called for usbdev1.4_ep01 usb_endpoint usbdev1.4_ep82: ep_device_release called for usbdev1.4_ep82 usb_endpoint usbdev1.4_ep83: ep_device_release called for usbdev1.4_ep83 usb_endpoint usbdev1.4_ep04: ep_device_release called for usbdev1.4_ep04 zd1211rw: probe of 1-1.3:1.0 failed with error -110 usbtest 1-1.3:1.0: usb_probe_interface usbtest 1-1.3:1.0: usb_probe_interface - got id drivers/usb/core/inode.c: creating file '004' hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0008 usb 1-1.3: usb auto-suspend # does anyone have some ideas? Thanks Sundar On Tue, Oct 7, 2008 at 3:30 PM, Sundar Visvanathan <fcrd73@...> wrote:
------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs |
|
|
Re: zd1211rw 1-1.1:1.0: zd_usb_ioread16v() read timed out
by Hin-Tak Leung-3
::
Rate this Message:
--- On Wed, 8/10/08, Sundar Visvanathan <fcrd73@...> wrote:
> I got the dongle to work inconsistently on > "2.6.22.18-omap1" ,configured the > same as earlier in the post.The dongle works fresh out of > the box.But on > second and consecutive attempts it stops working and goes > into reset mode. I actually don't use the rw driver, because I need Master mode (which, currently, only the vendor driver provides). Somebody will hate me for mentioning this - there are people who had some experience with making the vendor driver work on ARM: http://linux.omap.com/pipermail/davinci-linux-open-source/2007-February/002478.html http://www.mail-archive.com/davinci-linux-open-source@.../msg02723.html On a different issue, have you tried "modprobe -r" between attempts? ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Zd1211-devs mailing list - http://zd1211.wiki.sourceforge.net/ Unsubscribe: https://lists.sourceforge.net/lists/listinfo/zd1211-devs |
| Free embeddable forum powered by Nabble | Forum Help |
